supplemental service manual for nnp295 ,nnh275,...
TRANSCRIPT
Supplemental Service Manual for NNP295 ,NNH275, NNS255, NNS245 NOTE: This is not a modification. This Service Manual is applied to units produced after May 2006. Unit identification is with suffix A on the serial number. (see diagram below)
Service ManualORDER NO. PHAMOS0605024S1
Microwave Oven
Supplement
© 2006 Panasonic Home Appliance Microwave Oven (Shanghai) Co., Ltd. All rights reserved. Unauthorized copying and distribution is a violation of law.
Please correct corresponding content on the original Service Manual in time after accepting this Supplement Service Manual.
Please fi le and use this Supplement Service Manual together with following Service Manual.
NN-P295 APH/CPH etc, ORDER NO.PHAMOS0503019A1.
NN-P295 NN-H275NN-S255 NN-S245NN-H264SFRNN-H264BFRNN-H264WFRNN-S254SFRNN-S254BFRNN-S254WFRAPH(USA)CPH(CANADA)
WARNINGThis service information is designed for experienced repair technicians only and is not designed for use by the general public.
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product.
Products powered by electricity should be serviced or repaired only by experienced professional technicans.Any attempt to service or repair
the products or products dealt with in this service information by anyone else could result in serious injury or death.
!
®
58
55 57
39
23
26
15
1614
3851
52
2
87
39
23
26
15
1614
N1
3851
52
2 FILTER BRACKET
(New added)
LEAD WIRE C
(New added)
FUSE HOLDER
(New added)
Before change After change
57
N2
N3
Subject: Remove the FUSE to the position on AIR GUIDE A for reducing the surface temperature of FUSE, and there is no more FUSE on the NOISE FILTER(U) accordingly.
Chassis: OTR Microwave ovenModel(s): NN-P295SF/BF/WF APH,NN-H275QF/SF/BF/WF APH,NN-S255BF/WF APH NN-H264BFR/WFR APH,NN-S254SFR/BFR/WFR APH,NN-S254SFB APH NN-P295SF/BF/WF CPH,NN-H275QF/SF/BF/WF CPH NN-S255BF/WF CPH,NN-S245BF/WF CPHDate: May 8,2006Contents: 1) Change the length of AC CORD W/PLUG. 2) New added "FUSE HOLDER","LEAD WIRE C" and "FILTER BRACKET" parts etc. 3) Remove the FUSE to the position on AIR GUIDE A, so withdraw the FUSE HOLDER on
"NOISE FILTER (U)". 4) Remove the position of NOISE FILTER(U),from NOISE FILTER BRACKET to COVER PLATE
(Part No.F42176Z00AP).Cancel the NOISE FILTER BRACKET simultaneously.Note: If the Serial No. suffi x with "A",then it is the after change production, whereas is before change production. For example, Serial No. " 6A ******** " is before change production, but " 6A ******** A " is after change
production.
NAME PLATE
Remove
Cancel
Remove
05/06Printed in China
Reason for change
NOTE: Items marked * are supplied by CSD(Japan).
1. Improve performance 2. Change of material or dimension 3. To meet approved specifi cation 4. Standardization 5. Addition 6. Deletion 7. Correction 8. OtherInterchangeability code
BOriginal Early
New Late
Original parts may be used in early production sets only.New parts may be used in early or late production sets. Use original parts where possible, then stock new parts.
COriginal Early
New Late
New parts only may be used in early or late production sets.Stock new parts.
DOriginal Early
New Late
Original parts may be used in early production sets only.New parts may be used in late production sets only. Stock both original and new parts.
Part Number Ref. No.
Original Part No. New Part No. Part Name & Description Interchange-
ability CodeReason for
Change Remarks
2 F00336Z00AP F00336Z20AP FUSE LABEL D 3
16 F40256Z00AP F40256Z80AP ORIFICE B 8
57 J692Y8F00APF692Y8F20AP
NOISE FILTER (U) D 3 APH
57 J692Y4T00CPR NOISE FILTER (U) D 3 CPH
58 F68006Z00AP —— NOISE FILTER BRACKET D 6
61 F900C6Z00AP F900C6Z80AP AC CORD W/PLUG D 3 APH
61 F900C6Z00CP F900C6Z80CP AC CORD W/PLUG D 3 CPH
N1 —— F62315G10XN FUSE HOLDER D 5 (NOTE)
N2 —— F03566Z80AP LEAD WIRE C D 5 (NOTE)
N3 —— F82605H00AP FILTER BRACKET D 5 (NOTE)
60 F63266F00AP F63266Z80AP TURNTABLE MOTOR C 1
75 F63266F00AP F63266Z80AP DRIVE MOTOR C 1
Subject: CORRECTION OF PARTS LIST
AIR GUIDE A
FUSE HOLDER
FUSE
New added
FILTER BRACKET
New added
without Fuse Holder
COVER PLATE
NOISE FILTER (U)
FUSE HOLDER
NOISE FILTER (U)
Note: “N1”, “N2” & “N3” indicated new added parts for this Supplement Service manual only.