supioneer metal materials co., ltd · 2019. 10. 11. · 2.8 galvanized /ppgi steel coil/sheet 2.9...
TRANSCRIPT
Supioneer Metal
Materials Co., Ltd The most comprehensive types of steel
supplier
http://firsteelplate.com/
http://www.firsteelplate.com Email: [email protected]
1、ABOUT SDJS
1.1 SDJS Introduction
Supioneer Metal Materials Co., Ltd is the only steel supplier in China who
provides the most comprehensive types of steel. Our steel plate products
include black steel plates, stainless steel plates, galvanized steel plates,
checkered steel plates, steel coils and so on. Among all steel plate products of
our company, extra wide and thick steel plates, Cr-Mo steel plates, low
temperature pressure vessel steel plates, and high strength steel plates are
the four featured products. Supioneer Metal Materials Co., Ltd has established
long-term strategic cooperative relationships with the producers of the
products mentioned above. Powerful product sources and marketing capacity
enable us to take the leading place in domestic steel trade. Now the company
has shifted its focus to the exportation of steel materials, and our aim is to
become the largest and strongest steel materials supplier in China’s
international trade.
We can provide Extra-Wide and Extra-thick Steel Plate with max thickness of
700mm, max piece weight of 50t, which makes us the only supplier of China
who can provide steel plate of such specification. Anti-Hydrogen Cr-Mo Steel
Plate with max thickness of 198mm and max piece weight of 38t is also
available. Our Low Temperature Pressure Vessel Steel Plate is weldable
under the temperature condition of -196℃. Representative steel grades of low
temperature vessel steel plate are 9Ni (SA553),08NiDR (SA203E), all with
better properties compared to international quality standards. We can also
provide High Strength Steel Plate with excellent quality.
Product standard grades cover main international standards for steel materials,
such as ASTM, ASME, API, JIS, DIN, BS, etc., and these products are sold
across over 100 countries and areas in Middle-east, Southeast Asia, Africa,
South America, etc. We now have four large-scale warehouses for abundant
product supply: one is located in Shanghai and has a stock inventory of about
7, 000 tons; the warehouse in Qingdao has a stock inventory of about 6, 500
tons; and each warehouse in Tianjin and Zhengzhou has about 3, 000 tons of
stock inventory. Based on the sound foundation of steel resources, Supioneer
Metal Materials Co., Ltd also adopts the "one-stop" service, allowing
customers to enjoy the lowest cost for steel cutting, welding, drilling,
galvanizing, and the best quality service at the same time.
http://www.firsteelplate.com Email: [email protected]
1.2 Why Choose SDJS
Decades of producing and trading experience
ensuring you to touch with our most
competitive products
Penetrating insight of every tiny market
fluctuation for hundreds of products in hand
Price advantage for designated premium steel
benefited from strategic cooperative
partnership with famous steel plants in China
A processing factory of our own, advanced
manufacturing technology, and our aime of
achieving one stop processing service
http://www.firsteelplate.com Email: [email protected]
1.3 One-stop Service
Selling servicess
what we caAll you need to do is give us the drawings of wanted products; the rest will be nicely done by us. This is what we call “one-stop” service. p” service.
Selling concepts
What we sell has been and will always be customer satisfaction towards our products. We are willing to meet all requirements of our friends; we will not be happy unless our friends
Selling products
We can not only provide any kind of steel plate you need, but also cutting and processing service if necessary.
http://www.firsteelplate.com Email: [email protected]
2、Steel Plate Series
2.1 Stainless steel plate
2.2Bridge building steel plate
2.3 Cr-Mo steel plate
2.4 High strength steel plate
2.5 Mold steel plate
2.6 Alloy structural steel plate
2.7 SA203E /SA353/%9Ni low temperture plate
2.8 Galvanized /PPGI steel coil/sheet
2.9 Oil pipeline steel plate/coil
2.10 Nuclear power steel plate
2.11 Boiler and pressure vessel steel plate
2.12 Shipbuilding and ocean platform steel
2.13 Low-alloy high-strength steel plate
2.14 Wear-resistant steel plate
2.15 Carbon structural steel plate
2.16 Corrosion-resistant steel plate
http://www.firsteelplate.com Email: [email protected]
2.1 Steel Plate Series—Stainless steel plate
ASTM:201,202,301,304,304L,310S,316,316L,316LN,316Ti,321,416,430,410,420,431
JIS:SUS301,304,304L,316,316L,346LN,316Ti,430,410S,420J1
UNS:S30400,S30403,S31600,S31603,S32100,S43000,S41000,S42000,S43100,S31254
Stainless steel has the properties of smooth surface, high plasticity/tenacity/mechanical
strength, and resistance to acid/alkali gas/liquid or other corrosive substances. It is a kind
of alloy steel that does not easily get rusted but not absolutely incorruptible.
Generally speaking, stainless steel plate is the overall name for stainless steel plates and
acid-resistant steel plates. The former refers to steel plate resistant to corrosion caused
by atmosphere, steam, water and other media; while the latter refers to steel plate resista
nt to corrosion caused by acid, alkaline, salt and other corrosive chemical media.
Stainless steel is widely used in paper heat exchanger for pulp & paper making equipme
nts, food industry equipments, medical & chemical industry, dyeing machinery, pipe, exte
rnal materials for coastal buildings, construction decoration,etc.
http://www.firsteelplate.com Email: [email protected]
2.2 Steel Plate Series— Bridge building steel plate
ASTM A709MGr36,A709MGr50,A709MGr50W,A709MGr70W,HPS50W,HPS70W
ASTM A514/A514M-00:GrA,GrB,GrE,GrF,GrH,GrP,GrQ,GrS
ASTM A709/A709M-03:A709-50F-2,HPS485W
ASTM A572/A572M-97: A572Gr42,A572Gr50,A572Gr60
DIN 17102-81: StE355
DIN 17100-80: St37-2,St52-3
BS4360-1986:43B,50D,55E
BS EN 10025-6:2004: S550QL,S620QL1,S690QL1,S890QL
EN10025:1990+A1:1993:S235JR,S355K2G4
EN10113-2:1993: S460N,S275NL,S355N,S420N,
EN10113-3:1993:S275M,S355ML,S420M,S460ML
Bridge building steel plate is especially used in construction of railway or highway
bidges. Bridge building steel should possess high strength and toughness to bear the
loads and impacts of vehicles. Besides, it is required to be wear-resistant,
atmospheric corrosion resistant, and to have high quality surface and proper
toughness under low temperature. Bridge building steel is usually made from basic
open hearth killed steel. Bolt welded bridge building steel is even required to have
proper weldability and low notch sensitivity.
Specification: thickness: 6-50MM, width:1-2.4M, length:2-16MOur main grades of
bridge building steel are as below: A709M (Gr36, 50, 50W, 70W, HPS50W,
HPS70W)
http://www.firsteelplate.com Email: [email protected]
2.3 Steel Plate Series—Cr-Mo steel plate
Mainmterial:SA387Gr11,SA387Gr12,SA387Gr22,SA302,2.25Cr-1Mo,25CrMo4,34CrMo
4,42CrMo4
ASTM/ASME/AISI/API:SA387Gr11C12,2.25Cr-1Mo/SA387Gr22CL2,4130,4140/4142
JIS:SCM420/SCM22,SCM430/SCM2,SCM4
DIN:25CrMo4(1.7218),34CrMo4(1.7220),42CrMo4(1.7225)
EN10083-1:25CrMo4,34CrMo4,42CrMo4
The series of Cr-Mo steel plate:
SA387Gr11 series: 14Cr1MoR, SA387Gr11CL1, SA387Gr11CL1/2, 1.25Cr-0.5Mo,
1.25Cr-0.5Mo-Si
SA387Gr12 series: 15CrMoR, SA387Gr12CL2, 1Cr-0.5Mo
SA387Gr22 series: 12Cr2Mo1R, SA387Gr22C12, 2.25Cr-1Mo
2.25Cr-1Mo-0.3V series: 12Cr2Mo1VR, 2.25Cr-1Mo-0.3V
SA302 series
http://www.firsteelplate.com Email: [email protected]
2.4 Steel Plate Series— High strength steel plate
ASTM/ASME/AISI/AP:Type8 Grade 80[550],Type8 Grade 80[550],100[690]Type Q
EN10025:S460QL1,S550Q,S550QL,S690Q,S690QL,S690QL1,S890Q,S960Q
According to the ULSAB (Ultra Light Steel Auto Body) of International Iron and Steel
Institution, steel with yield strenth between 210~550MPa is high strengh steel (HSS),
while steel with yield strength higher than 550MPa is ultra high strength steeel (UHSS).
High strength steel also can be classified by strengthening mechanism into ordinary high
strength steel and AHSS (Advanced High Strength Steel).
Ordinary high strength steels include C-Mn steel, BH steel (baking-hardened), HSS-IF
steel (interstitial free), and HSLA steel (high strength low alloy). AHSS steel mainly
includes DP steel, TRIP steel, M steel, CP steel, HF steel, and TWIP steel. AHSS steel's
yield strength is between 500-1500MPa, with good property of energy absorption. Thus,
AHSS steel plays an important role in automobile lightening and safety performance
improving of automobiles. AHSS steel is widely applied in vehicle industry, mainly used for
making vehicle structure components, safety components, and reinforcement
components like A-B-C column, doorsill, front-bank bumper, door buffer beam, slide rail of
chair, etc.
http://www.firsteelplate.com Email: [email protected]
2.5 Steel Plate Series—Mold steel plate
ASTM: P20,P21,420,1053, 1551, 1561, 1566, AISI-P20/GS2311
UNS: G10530, G15510, G15610, G15660
JIS: P20 + Ni,S45C-S55C,SWR-H52B, S53C, G15610, S58C, S45C-S55C, P80
DIN: 2C50, 2C60, CK60, 65Mn4, 1.233
Mold steel refers to steel used for forging, punching, cutting, casting, etc. Mold steel can
be divided into three categories: cold die steel, hot die steel and plastic molding mold
steel.
http://www.firsteelplate.com Email: [email protected]
2.6 Steel Plate Series— Alloy structural steel plate
Featured steel grade: SAE4130, 25CrMo4, 34CrMo4, 42CrMo4, 4118, 4135
ASTM/ASME/AISI/API:1340,1052,5140,4135,4140
JIS:SMn420,SMn21,SMn433,SMn1,SMn438 ,SCr445( SCr5 )
DIN:15Mo3(1.5415) ,42CrMo4(1.7225) ,15CrMo5(1.7262) ,28Mn6(1.5065),30Mn5(1.506
6)
Alloy structural steel is so called because this kind of steel contains certain other alloy
elements, and it is applied for fabrication of machine parts and construction components.
Alloy structural steel has proper hardenability. The microstructure becomes fine pearlitic,
sorbite, bainite structure after proper steel heat treatment, thus having high tensile
strength and yield ratio (average value 0.85), high toughness and fatigue strength, with
lower ductile-brittle transition temperature, which makes is suitable for making machine
parts with large sectional diamension.
Alloy structural steel can be generally divided into quenched and tempered alloy
structural steel and surface hardened alloy structural steel. The former is suitable for
making shafts and connecting rods bearing large load; the latter is suitable for making
components with hard and wear-resisting surface and soft heart, such as gears and
shafts.
http://www.firsteelplate.com Email: [email protected]
2.7 Steel Plate Series— SA203E /SA353/%9Ni low temperture plate
ASTM:SA203E,SA353,SA516 Gr.60-(HIC),SA553-1,SA516 Gr.65-(HIC) ,SA516
Gr.70-(HIC)
JIS:SL9N520,SL9N590
EN 10028-3:X8Ni9+NT640,X8Ni9+QT680,X7Ni9+QT680
1. Introduction to SA203E steel plate:
SA203E steel is a very premium steel applied in fabrication of low temperature welding
pressure vessel. We promote this kind of steel at its most competitive price. Our SA203E
takes lead in its low temperature ductility property in iternationl quality level, with a max
thickness of 100mm.delivery status: normalizing, normalizing + tempering,size:
T*W*L=6-100*1500-3800*6000-18000mm,operation temperature: -100ºC--100ºC
2. Introduction to 9%Ni,SA553 steel:
ASME SA553 steel is designed for application under low temperature conditions. This
steel holds pretty good low temperature ductility property at -196℃ . Its yield strength
property, as well as ductility property, is better than Austenitic stainless steel
under the same low temperature circumstances. Besides, properties like
forming, weldability, and crack resistance are also good. SA353(9Ni) steel is
applied for fabrication of LNG/lilquid argon/liquid nitrogen containers.
3. Other advantageous products:
H2S anti-corrosion pressure vessel steel: SA516 Gr60(HIC), SA516
Gr65(HIC), SA516 Gr70(HIC)
http://www.firsteelplate.com Email: [email protected]
2.8 Steel Plate Series— Galvanized /PPGI steel coil/sheet
JIS: SGCC, SPCC, SGHC, SGCC/DC51D+Z, SPCD
JIS:G3302,TSGC(GC),TSGC340(GC),TSGC400(GC),TSGC440(GC),TSGC490(GC),TS
GC570(GC),TSGCD1
JIS:G3141,TSPCC,TSPCD,TSPCE
EN 10327:TDX51D+Z(GC) ,TDX52D+Z ,TDX53D+Z ,TDX54D+Z
EN 10130:TDC01,TDC03,TDC04
EN 10326: TS220GD+Z(GC), TS250GD+Z(GC),TS280GD+Z(GC),TS320GD+Z(GC),TS3
50GD+Z(GC),TS550GD+Z(GC)
SAE:SAE1010,SAE1008,CPCD,CPCE,SGSS,SGCD,PPGI
Application:Roof, floor deck, trailer coach, household appliances, commercial and indus
trial buildings.
Color-coated sheet is also called color-coated steel plate, colored plate in steel industry.
Color coated steel plate is made from cold rolled steel plate and galvanized steel plate
by processing a series of treatment as surface pretreatment (degreasing, cleaning, and c
hemical conversion treatment), coating painting continuously (roller coating method), and the
n baking and cooling.
http://www.firsteelplate.com Email: [email protected]
2.9 Steel Plate Series—Oil pipeline steel plate/coil
Featured steel material: API 5L : Gr. B, X 42, X 52, X 60, X 65, X 70, X 80
ASTM/ASME/AISI/API:X 52,X 60,X 65,X 70,X 80,X 42
DIN:StE 290.7 TM,StE 360.7 TM,StE 415.7 TM,StE 445.7 TM,StE 480.7 TM
EN 10028-3:L 360MB,L 415MB,L 450MB,L 485MB,L 555MB,L 290MB
Pipeline steel refers to hot coil or wide and thick plate used in manufacture of large
diameter welding steel pipeline for oil, and natural gas transferring.
Steel plates for this kind of use should have high compressive strength, high temperature
toughness and excellent weldability.
Our company supplied more than 80 thousand tons of X70/X65 pipeline steel for China
West-east NG transmission project. Our products are mainly used for making
themain/branch/stations transmission line pipes.
http://www.firsteelplate.com Email: [email protected]
2.10 Steel Plate Series—Nuclear power steel plate
Material: 18MnD5, SA516, SA533,SA738, P265GH, P295GH, P355GH
ASTM/ASME/AISI/API:SA738,SA533,GrBCl1,SA533,SA516
NF:16MnD5,18MnD5,16MND5,A48CPR
EN 10028-3:P265GH,P295GH,P355GH
The range of size demension: 8~300mm x 1500~4000mm x 2000~18000mm
Delivery status: Normalizing, Quenching+Tempering, Normalizing+Tempering,
Nuclear power steel is applied for fabrication of conventional island or nuclear island
components, such as reaction island safty liner, safety gate, safety container, high
pressure heating equipment, evaporator, etc.
Our nuclear power steel conforms to French RCC-M and ASME nuclear standards.
Our 20HR,16MnHR nuclear power steel has already been used in China Lin'ao and
Qinshan Nuclear power station, and supplied a total quantity weight of 13 thousand tons.
16MnD5 high quality steel is applied for making voltage stablizer which is the critical
equipment of nuclear power station.
Application:Reactor pressure vessel, steam converter, stabilizer steel material:SA533 B
Reactor safety containment: P235GH, P265GH, P355GH, SA516 GR70
Relavant quality standard systerm:RCC-M2000+2002,NCA3800+ND, NC, NF2000.
http://www.firsteelplate.com Email: [email protected]
2.11 Steel Plate Series—Boiler and pressure vessel steel plate
Featured Boiler steel grade: ASTM : A515Gr.60,A515Gr.70,A299 JIS:SB410,SB460
DIN:HII,17Mn4,19Mn6
ASTM:A285gr.A/B/C,A 299,A442
Gr.55/60,A515gr.55/60/65/70,A516gr.55 ,A516gr.65,A516gr.70,A 537class
1,A662Gr.C,A387Gr.12,A204Gr.B
JIS:SPV490Q,CF62,SPV 355,SB410,SB460,SB480,SCMV2,SCMV4,SB49M
EN10028:P355M/ML1/ML2,P420M/ML1/ML2,P460M/ML1/ML2,P355Q/QH/QL1/QL2,P4
60Q/QH/QL1/QL2,P500Q/QH/QL1/QL2,P690Q/QH/QL1/QL2,P355N
Featured Pressure vessel steel grade:
ASTM:A662Gr.C,A387Gr.12,A387Gr.22,A204Gr.B
JIS:SPV355,SLA33,SCMV2,SCMV4,SB49M
DIN:EStE355,13MnNiMo54,BHW35,13CrMo44,10CrMo910,15Mo3,13CrMoV42
Steel for Boilers and Pressure Vessels includes low temperature low alloy steel and
quenched and tempered high strength steel. Widely used in petroleum & chemical
industry, power station, boiler etc., and suitable for making parts, such as reactor,
transducer, separator, sphere vessel, oil tank, Liquefied gas tank pressure vessel of
atomic rector, boiler drum, LP gas cylinder, high pressure pipe for hydroelectric station,
spiral water turbine frame, etc.
http://www.firsteelplate.com Email: [email protected]
2.12 Steel Plate Series— Shipbuilding and ocean platform steel
Material : AH32, AH36, AH40, DH32, DH36, DH40, EH32, EH36, EH40, FH36,
FH32,FH40 (Z15.Z25.Z35), etc.
ASTM:A387Gr11,A514,A516,A517GrQ
BS:S355G10+N,S355G7+M,S355G8+M
Our representative product of this kind is high strength ship building steel. We supply
certificated grade E40 steel of thickness up to 100mm. Grade E50 steel is for making ship
requiring good welding property and ocean machinery equipment, with the maximum
thickness of 60mm, yield strength over 500Mpa, tensile strength between 610~770Mpa,
bearing impact of transverse 33Joule at -40℃.
Our ship building steel plates are accepted and certificated by nine classification societies.
Standard: According to user's requirements, the following criteria can be delivered:
CCS、DNV、GL、LR、BV、KR、ABS、API、RINA、NK、ASTM.
Size dimension: Thickness: 8mm-650mm, Width: 1500-4020mm, Length:
3000-27000mm.
Processing Treatment: steel cutting (sawing), welding pretreatment (derusting,
lacquering, painting, sand clusting), test( UT, HIC, Impact test, PWHT Z15, Z25, Z35, and
so on ), and other services.
Quality Level: A, B, C, D, E and thickness Z15, Z25, Z35. Inspection Standard: in
accordance with China (JB4730, GB/ T2970), United States (A435, A577, A588), Japan
(JISG0801, JISG0901), Germany (SEL072), British (BS5996), France (NFS04-305) and
other domestic and international testing standards.
http://www.firsteelplate.com Email: [email protected]
2.13 Steel Plate Series— Low-alloy high-strength steel plate
JIS:SM490(A,B,C),SM41A.B.C,SM50A.B.C,SM58,Wel-Ten60,Cor-TenB,SM570,SM520,
SN490(B,C),SN400(A,B,C)
ASTM:A572M(Gr42,50,55,65),A633(A,B,D,E),A588Gr.A,A588Gr.B,A588Gr.C,A588Gr.
K
EN10025-4:S275(N,NL),S355(N,NL),S420(N,NL),S460(N,NL)
DIN:S460NL,St70-2,St60-2,St52-3,S355J2/J0,S420NL,,S500MC (1.0984)
High strength low alloy structural steel is steel added with certain alloying elements
accounting for less than 5% in the melting process. Adding alloying elements can
significantly improve the strength of steel, and the three major indexes of the steel
structure as strength, stiffness and stability can give full play. Due to different quality, high
strength low alloy structural steel is divided into A, B, C, D, E grade.
High strength steel: This is a kind of high strength steel which also gives excellent low
temperature toughness.
Cold steel: It belongs to ferritic cryogenic steel. By reducing reduce phosphorus, sulfur
content, the purity of the steel can be increased and get a lower ductile - brittle transition
temperature.
Corrosion resistant steel: Such steel has a certain degree of resistance to corrosion
caused by the atmosphere, water, hydrogen sulfide and other environmental factors. For
example, 10MnPNbRE steel is corrosion resistant to marine atmosphere and seawater,
which makes it suitable materials for ships, sheet piles, and derricks.
http://www.firsteelplate.com Email: [email protected]
2.14 Steel Plate Series—Wear-resistant steel plate
718/ 2738 ,S45C-S55C, 40Cr, SM45-SM55, SM3Cr2Mo, WSM30A, SM3Cr2Ni1Mo,P30A,
6388, P80A, 638B. etc.
ASTM:1053,1551,1561,1566,AISI-P20/GS2311
JIS:S58C, H52B, S53C,G15610
DIN:65Mn4,CK60,2C60,2C50,1.233
Wear resistant steel plates have good properties of high strength/high wear
resistant/stability/straightness/surface quality, etc. High hardness, highstrength, and
perfect impact toughness make it a perfect material in extensive applications, such as
wear resistant parts of equipment for: underground mine/cement industry/highway
building/mining/metallurgy. The thickness of our products are between 8-100MM,
hardness up to 500HBW .Brief introduction of four categories of wear resistant steel
plates:
Ordinary wear resistant steel:Thickness of this series of steel plates can be up to
100MM, with proper hardness and toughness. The repreventative grades are WNM360、
WNM400.
Super wear resistant steel: With longer operation life time, this series of products can
decrease operating costs. Without sacrificing much weldability and forming property, this
kind of steel plate proves to be highly wear-resistant. The representative grades are
WNM450、WNM500.
High toughness wear resistant steel: This kind of steel has good toughness even under
-40℃, and can bear strong impact under low temperature. Representative grades are
WNM360、WNM400 series. Good weldability
wear resistant steel: This series of steel plates ensure the same weldability with
common material under harsh welding conditions. Representative grade is WNM360L.
http://www.firsteelplate.com Email: [email protected]
2.15 Steel Plate Series—Carbon structural steel plate
ASTM: A283Gr.D,1010,1030,1035,1045,1050/1049,
1055,A830,A572Gr42/50,A573Gr58/65/70,
JS:S50C/S53C,S235,S355,SS330,SS400,SS490,SPHC,SS400,SS50,SS34,SS41,S10C/
S12C,S25C/S28C,S30C/S33C
DIN:St37-2,St44-2,St50-2
Carbon structural steel: The carbon content of this kind of steel ranges from 0.05% to
0.70%, and a very few steel grade carbon content can reach 0.90%. There are generally
two categoriesof carbon structural steel: common carbon structural steel and high quality
carbon structural steel.
Common carbon structural steel: The carbon content is generally under 0.30%, and
manganese content no more than 0.80%. Though strength of common carbon structural
steel is low, its plasticity, toughness, and cold deformation is good. Usually it is used
directly without heat treatment. Common carbon structural steel mainly used for
railway/bridge/construction, and for making various common components not requiring
heat treatment.
High quality carbon structural steel:high quality carbon structural steel According to its
carbon content and different use, this kind of steel is roughly divided into three types: ①
low carbon steel with carbon content of less than 0.25%: the presentatives of this kind of
steel are 08F, 08Al whose carbon content is less than 0.10%. These two types of steel
have very good deep drawability and weldability; ② medium carbon steel with carbon
content of 0.25~0.60%, mainly used under modulation condition and for manufacturing of
equipment parts in mechine-building industry; ③ high carbong steel with carbon content
of over 0.6%, mainly used for manufacturing of springs, rolls and gears.
http://www.firsteelplate.com Email: [email protected]
2.16 Steel Plate Series—Corrosion-resistant steel plate
JIS G3114: SMA50AW,SMA50CP
EN10025-5: WR50B, WR50C
ASTM:A588-A242Gr.1,A588Gr.A,A709Gr.50W,CortenA,CortenB,HIC,08Cu,16MnCu,10
CrMoAl,St37-3Cu3
EN10028-3:S355J0W,S460NH,S235J2W,S355J0WP,S355J2G1W,S355J2G2W,S355K2
G1W,S355K2G2W
BS 4360: WR 50 A, WR 50 B, WR 50 C,
CSA G 4021: gr 350 -A AT, gr 400-A AT
Weathering resistant steel, namely atmospheric corrosion resistant steel, belongs to the
low alloy steel series between common steel and stainless steel. Weathering resistant
steel is made from common steel by adding a small amount of corrosion resistant
elements such as copper and nickel. It has the properties of high quality steel like good
toughness, plasticity, mouldability, weldability, and resistance to corrosion, high
temperature and abrasion; weather resistance is 2~8 times than common carbon steel;
and coating performance is 1.5~10 times than common carbon steel. Besides, weathering
resistant steel has good resistance to rust, can highly improve the performance and
extend service life of structure parts, thus is used to make structural parts used in open
atmospheres, corrosive gas and liquid environment.
Weathering resistant steel is mainly used to build structural parts of containers, railway
vehicles, oil derricks, seaport buildings, oil production platforms and vessels containing
H2S corrosion medium in petro-chemical equipment.
http://www.firsteelplate.com Email: [email protected]
3 Our Network
Supioneer Metal Materials Co., Ltd tries its best to integrate the advanced
technology, excellent talents and advanced concept to support the development of the
company, and ensure that our business partners get products which suit their demands
the best.
The sales network of our company widely spread in India, Pakistan, Australia,
Korea, Japan, etc.
Henan Supioneer Metal Materials Co., Ltd
河南世迪金属材料有限公司
http://www.firsteelplate.com
Email: [email protected]
Tel: 86-371-5503 1185
Fax: 86-371-8622 0366