supermec - home improvement pagesm.homeimprovementpages.com.au/creative/brochures/... · ffl top...

SUPERMEC®

design genius

Lifts for Australia’sfinest homes

ContentsIntroducing the Supermec 3

Technological Evolution 4

Design Guide 6

Lift Shafts 7

Indicative Layout Drawings 8

Finishes 10

Additional Information 16

Energy Use Calculations 18

Technical Specifications 19

This catalogue is about the Supermec

Substantial information is in electronic format. As a high technology company we use the latest tools.

Visit www.liftshop.com.au for the latest

Residential lift designs •

Pictures and plans •

Exciting projects•

Information about us•

Product range•

Cover photo:

Supermec with custom cabin walls and polished stainless steel finishes and doorsPort Melbourne, VIC

DisclaimerAll illustrations, information and specifications presented and referred to in this brochure were correct at the time when this brochure was approved for printing. The colour in the photographs may vary from actual colours, however LIFTSHOP pty ltd reserves the right, subject to laws of Australia and/or the regulations of any competent authority which may apply from time to time, at its discretion at anytime and without prior notice to discontinue or change the models, features, specifications, designs and prices of the products referred to in this brochure and any optional equipment therefore without incurring any liability whatsoever to any purchaser or prospective purchaser of any such products.

3Copyright 2011 LIFTSHOPwww.liftshop.com.au

The Supermec is Australia’s first post–hydraulic technology, traction lift designed specifically for the residential market and is the ultimate in home elevators. It is the absolute luxury choice in lifts and is sold exclusively by Lift Shop.

Designed and made in Italy, the Supermec was first introduced to Australia in January 2005 and was immediately recognised for its advanced technology. It is machine room-free and has a battery drive system, which means its uses very little power (approximately 87% less energy than the hydraulic drive systems) and can even run during a power failure. Such impressive environmental credentials meant that the Supermec was the only lift to be displayed at ENERGETHICA – Europe’s leading exhibition for innovation in Energy and Environmental conservation.

The Supermec is equally renowned for its good looks, with custom manufacturing and stunning Italian styling. Manufactured by the same company responsible for Lift Shop’s ElfoLift, Supermec can be completely customised in size and style, to ensure a lift that is as individual as you are.

From sliding doors that open and close at the push of a button, to its minimised pit depth, marginal overhead clearance and no machine room requirements, the Supermec is every customer’s dream and the envy of our competitors.

summary Persons 7 - 9Speed 0.30 - 0.50m/sDesign sizes FlexibleStyle options High impact finishesAccessories NumerousPit depth 250 - 350mmHeadroom 2800 - 3150mmDesign and manufacture ItalyDrive TractionMaximum floors 6 (opposite and adjacent through car possible)Control AutomaticPower requirement Single phase 20ALanding doors Automatic side slidingStandard warranty 3 yearsComprehensive maintenance 1 year

SUPERMEC®

The Supermec 2 is new in 2011 and introduces an improved drive and computer system to the traditional Supermec model. With these advances, Supermec sets another new standard in Australian residential lifts, it is faster and stronger, with the ability to travel at an impressive 0.50m/s (66% faster than Supermec and most other home lifts), carrying an additional two people.

Supermec 2: faster (0.50m/s) and stronger (up to 630kg or nine passengers)

At Lift Shop, being world class is not a static condition. We remain the leaders by continuing to innovate and improve. This is how we maintain our clear leadership position in the competitive Australian residential lift market. Whilst others are still stuck in the hydraulic era, the Supermec now enters its 10th year in the post-hydraulic traction market.

SUPERMEC® 2

constant improvement New for 2011

Numeric coded security key pads •

Frameless glass door options•

As we introduce new technologies and advancements, customers are assured that what they love about Lift Shop lifts doesn’t change. Some of Australia’s favourite features continue to be:

Self-rescue system•

Sizes to suit your home perfectly •

Single phase power supply whilst travelling at up to • 0.50m/s speed

Full-height safety light curtains•

Optional steel and glass shafts for greater visual impact •

Truly personalised lifts•

Three-year parts warranty (included as standard)•

4 Copyright 2011 LIFTSHOP www.liftshop.com.au

Source: Elevator World Magazine January 2008

Source: Elevatori Magazine July 2005

Source:Elevatori Magazine July 2005

There has been several significant events in the history of the passenger lift, some of which include:

YEAR1853 Elisha Graves Otis creates the first lift for public use.

It travels five floors, carries 450kg at 0.2m/s and is located on Broadway, New York City

1867 The first hydraulic lift is installed at the Trocadero Palace

1911 The first high rise lifts serving the 41 level Singer Building in New York are installed

1935 The first lift is installed on a ship, the Normandy Ocean Liner

1936 The first automatic control lift is installed as the lift operator era ends

1948 The first electronic controlled system detecting calls, and then remembering them, is installed

1970s Hydraulics begin to become the popular drive for low-rise lifts

1996 Kone markets the first MRL (machine room-less) traction lift, eliminating the need for machine rooms with its revolutionary flat pancake motor

1997 The world begins to recognise the need to reduce environmental impact and power consumption

1998 Major lift companies world wide steer R & D and product range towards the MRL Traction

1999 A new era with a global approach to compliance standards begins, reducing manufacturing costs and enabling lifts to be sold with less need to adapt to specific local requirements

2000 Recognition of the needs of the elderly and infirm is under way and an accessibility for all trend begins

2000 Dramatic reduction in the use of MRLs and hydraulic lifts is seen globally

2003 The Supermec is released in Italy2005 The Supermec is released in Australia2007 Kone elevators announces it will no longer produce

hydraulic lifts in order to be more environmentally efficient

The lift industry continues to evolve with exciting new developments year after year.

The Next Generation in Lifts

technological evolutionpost hydraulic

The trend has continued and today hydraulics are an older, basic and cheaper option and prefered for discount and goods lift situations. They account for a fraction of the market.


FeaturesRevolutionary MEC • driveItalian Designed and • ManufacturedQuality styling and • finishesMRL (Machine Room • Free)Specifically designed • for the private home240v Single phase • power (20Amp) with 480 - 630kg at fastest speedsPower failure proof • battery drive systemNominal pit • and headroom requirementsDesigned to suit small • spacesEfficient shafts space • usageFully automatic• Smooth and quiet • operationAutomatic sliding • landing doors7 - 9 passenger (480 - • 630kg)

BenefitsFastest in class• Energy efficient smooth • and quietPower failure proof • drive systemNew technology• Styled to suit you with • WOW factor finishesLow running costs• No hydraulic oil•

Reminders3 year warranty• Steel shafts optional• Flexibility in design• go to • www.liftshop.com.au for the latest finishes and optionstest how your • finishes look with our interactive cabin design computer simulator

ComplianceAS1735.18• AS1735.16•

SUPERMEC X AVAILABLE NOW

630KG0.50m/s

discuss with yourdesigner today


section view

Machine cabinet 420W/215D/2100H

CEILINGS AND LIGHTS

MIRROR• Full wall• Half wall• Glass walls

HANDRAIL• Aluminium anodised• Stainless steel

FLOORHuge range

CAR OPERATING PANEL• Vertical• Horizontal

CABIN PROFILESHuge range

WALLHuge range

LANDING DOORHuge range

Headroom 2800 - 3150mm

Travel Max 12m

Pit Depth250 - 350mm

design guide

1 Consider your space requirements and lift location

2 Visit one of our showrooms

3 Consider your shaft construction material

4 Select the appropriate layout and obtain a drawing

for guidance

5 Consider your finishes

- landings

- cabin

- extras and accessories

6 Consult with your designer who will consider your

selections and provide you with a detailed quotation

We reserve the right to update finishes from time-to-time (in order to better suit customer desires)

Please refer to www.liftshop.com.au for latest selections.

Go to www.liftshop.com.au to see how your favourite finishes will look with our interactive cabin design simulator


LIFT SHAFTS

The Supermec is supplied with or without a steel shaft

Lifts require a shaft in which to run. The Shaft is either built by a builder or supplied by the lift company.

MASONRY SHAFTSConcrete, brick or block shafts are usually built into the home as part of the construction process (190mm thick load bearing walls are common). They are preferred by customers who want the lift to “blend in”. They require a bigger total outside shaft footprint due to the thickness of the concrete walls and may be cheaper in a new building situation.

STEEL SHAFTSWhere a sleek and sophiscated style is required for the entire outside of the lift shaft, the shaft is often purchased in addition to the lift. The steel shafts have a smaller outside footprint due to the 50mm thick load bearing structure, so are also popular when space is limited. Steel and glass shafts are extremely popular where a functional light well or architectural effect is desired.

The steel shafts look sensational, and are designed to impress the most discerning customers.

Steel shafts are also very quick to install because they are modular, designed to be carried through a normal door opening, do not require roof removal or a crane, and they sustain their own loads.

FINISHESInfill Panels

Clear transparent • Etched neutral glass • Reflecting stopsol • White milk • Smoke• Steel cladding to match shaft•

Structures

Galvanised • Powder coated in RAL colour of choice (over • 200 colours to choose from) Polished stainless steel•

Other important options available when shaft internals are visible

Black painting of all equipment • Decorati• on of outside of lift cabin (same range of options as for internal of lift car)


DOOR WIDTH (clear) Minimum Maximum

DW (Door Width) 600 1000

Door widths are in 50mm step increments and may slide left or right side

INTERNAL SHAFT SIZE To suit cabin size add

SW (Shaft Width) +500

SD (Shaft Depth) +360CABIN SIZE Minimum Maximum

CW (Cabin Width) 700 1200

CD (Cabin Depth) 800 1400

Maximum Cabin area of 1.60m2

The drive can be on the left or the rightSINGLE OPENING DRIVE TO SIDE

eg: CW .............. + 500 = SW ............... CD ............... + 360 = SD ...............










OPPOSITE OPENINGThe drive can be on the left or the right

eg: CW .............. + 500 = SW ............... CD ............... + 550 = SD ...............






SD (Shaft Depth) +400

ADJACENT OPENINGThe drive can be on the left or the right

CABIN SIZE Minimum Maximum




eg: CW .............. + 700 = SW ............... CD ............... + 400 = SD ...............

indicative layout drawingsSUPERMEC

CONCRETE/MASONRY SHAFT*Cabin sizes are in 50mm step increments.

Downloadable drawings on website





EXTERNAL SHAFT SIZE To suit cabin size add






The drive can be on the left or the rightSINGLE OPENING DRIVE TO SIDE

eg: CW .............. + 650 = SW ............... CD ............... + 500 = SD ...............










OPPOSITE OPENINGThe drive can be on the left or the right

eg: CW .............. + 700 = SW ............... CD ............... + 650 = SD ...............






SD (Shaft Depth) +505

ADJACENT OPENINGThe drive can be on the left or the right

CABIN SIZE Minimum Maximum




eg: CW .............. + 850 = SW ............... CD ............... + 505 = SD ...............

indicative layout drawingsSUPERMEC

STEEL SHAFT*Cabin sizes are in 50mm step increments.

Downloadable drawings on website


The automatic side and centre opening sliding doors and jambs are supplied and installed by Lift Shop, and are available in a range of styles and finishes. As doors slide out of the way internally into the shaft, the door motor is hidden on top of the lift car and carries the landing door automatically as it opens.

Doors come in:

Stainless steel, satin or polished finishes•

Galvanised and prepared for painting by others•

Come with glass or solid doors•

Are fire rated in one or two hours•

Have steel skin with vandal resistant steel backed • laminate in range of colours (see page 13)

Feature glass windows with a range of effects•

• Clear transparent • Smoke

• Reflecting • Bronze

• White milk • Etched neutral

Or can be done one of the stainless steel colours from our • exciting 2011 range

DOOR SIZESGenerally, jambs are 100mm wide and doors are 2000mm high, with a further 100mm jamb above.

For example, a door that is 850mm wide x 2000mm high clear opening is contained in a jamb that is 1050mm wide by 2100mm high. Other sizes are also available in 50mm increments from 600mm to 1000mm.

Doors can be either centre or side opening.

DOOR EXTRASCall buttons in the jamb eliminate the need for separate • landing penetrations

Remote control call buttons•

Security keys and swipes to the landings•

doors


floorsOtherRubber

GreyS - 671

BlackS - 673

Your Choice

Synthetic

ChestnutS - 616

Leaf GreenS - 617

Speckled GreyS - 630

Empire BlueS - 646

CoffeeS - 653

404 406 407 422 424

425 431 433 438 439

440 451 453 454 455

466 467 468 469 470

501 502 503 504 505

511 513

Produced by modern processes in one solid piece, which means no joins and few imperfections for a perfect look.

Manufactured Stone (Upgrade)This is just a small sampe of what’s available, but the range is almost infinite - consult your designer for additional options.


Steel Skin With VandalResistant Covering (Standard)

WhiteWL - A1

BlueWL - B22

TimberWL - DL10

BeigeWL - DT29

GreyWL - N1

Stellar Dark Blue WL - F17

CreamWL - G1

Black AnthraciteWL - N4

Inox GreyWL - PPS1

IvoryWL - PPS11

HairlineWS - 080101

Polished /Mirror WS - 080201

SatinWS - 080301

Super MirrorWS - 080401

Scotch BriteWS - 080501

VioletWS - 080202

GreenWS - 080203

ChampagneWS - 080204

BronzeWS - 080408

YellowWS - 080407

GreenWS - 080403

BronzeWS - 0800308

YellowWS - 080307

GreenWS - 080303

S.C. 416WS - 0822416

S.C. 417WS - 0822417

S.C. 418WS - 0822418

S.C. 419WS - 0822419

S.C. 420WS - 0822420

Canapa YellowWS - 081407

Ghiaccio GreyWS - 080710

Rombo BronzeWS - 081108

Cuoio RedWS - 081009

Quadro YellowWS - 080607

201 RedWS - 201

314 VioletWS - 314

114WS - 114

301 BlueWS - 301

804 BronzeWS - 804

Italian stainless steel with colour combinations never seen before. Any colour, any finish effect, any pattern, any etching - anything is possible.

This is just a small sampe of what’s available, but the range is almost infinite - consult your designer for additional options.

MIRRORS AND GLASS• Glass walls • Full height panoramic • Half height • Glass walls tinted in colours • Clear transparent • Smoke • Reflecting • White milk • Etched neutral • Mirror walls that are • Full height panoramic • Half height

SimilinoxWL - F12PPS

Dark TimberARPA4070

& profileswalls

cabin profiles(corners, skirting, ceiling support profiles and matching car operating panel)

Available as standard in • Stainless steel polished finish • Stainless steel satin finish • Steel skin with vandal resistant laminate covering in • Stainless steel like appearance • Stellar dark blue Or in any of the extensive colours from our 2011 stainless steel range

Italian Stainless Steels (Upgrade)


CAR CEILING AND LIGHTSCeiling heights are variable•

2060mm (standard)•

2150mm (optional)•

Standard or custom ceiling patterns•

Lights turn off when the lift is not in use in order to save • energy

CAR OPERATING PANELSCar operating panels in vertical (standard) or horizontal • (upgrade) layouts

• Stainless steel polished finish

• Stainless steel satin finish

• Steel skin with vandal resistant laminate covering available in

• Stainless steel like appearance

• Stellar dark blue

• Or in any of the exceptional colours from the stainless steel range.

• Security features including

• Link with your security system

• Numeric pads

• Key control (to most or some floors

and to isolate)Dama patterned ceiling with flourescent light above light diffuser. Available in white or stainless steel.

C501 - Dama

4 recessed low voltage downlights in a plain ceiling. Available in white or stainless steel.

C503 - Faretti

C502 - UniversalUniversal patterned ceiling with flourescent light above light diffuser. Available in white or stainless steel.

Labarint patterned with flourescent light above light diffuser. Available in white or stainless steel.

C504 - Labarint

accessories and optionsWith or without handrails •

Security keys and security parking•

Automatic dial or standard emergency telephone •

Overweight indication by audible alarm•

Automatic return functions to false floor or • nominated floor

Remote control call and send buttons with a • range of 50m so the lift can meet you as you enter the garage (or send the lift to meet guests)

accessories


SAFETY AND SECURITYLift Shop recognises that safety is paramount and has a perfect safety record. We will not use single or triple beam sensors, only full height light rays are the safe solution for automatic lifts (as per the European directives).

Safety is an invisible feature, like a car airbag, but it is also the valuable feature.

Supermec safety features include:Multiple steel ropes with 40 ton breaking strain •

Overload indicators giving audible warning of overload • conditions

Over-speed sensing safety gear, which automatically and • mechanically engages in the event of a descent or ascent that is too quick.

A siren•

A independently powered telephone•

Self-rescue systems•

An active safety circuit which continuously monitors the lift•

Full-height light ray protection (180 beam) •

Electrical locks that make it impossible for the lift to travel • when the landing door is not closed

Mechanical locks that make it impossible for the landing • door to open when the lift is not at floor level

Separate battery supply that keeps the lights and lift • working during power failure

design and performance Before a lift becomes available to the market it has to pass rigorous qualification criteria and tests and must be design registered with our Australian regulatory authorities.

As a leading European lift product, the Supermec easily met or exceeded the requirements of the Australian standard, and is now installed in many hundreds of locations throughout Europe and Australia.

The Supermec runs on nylon rollers within sealed bearings ensuring a smooth and comfortable ride on precision engineered guide rails.

IMPACT•ENVIRONMENTThe impact of the lift on its environment is massive. These are reduced by the Supermec.

Space Utilisation

Deep and expensive excavations for pits (waterproof) are • not necessary

Top hat sections for the headroom are not necessary•

Machinery space and machine rooms are not necessary•

Energy Efficient

Single phase 20A power on which to continuously charge • with trickle power

Lights that turn off when the lift is not in use•

Park at last exit point to avoid unnecessary runs•

Our lifts use significantly less power and space than any similar product available in the market place as at April 2011.

(See on page 18 for calculations)

important informationadditional


Explanation of Energy Used by the Supermec compared to the low pit and headroom hydraulic equivalent

SUPERMEC HYDRAULIC EQUIVALENT

Explanation of power use in the up direction

System in balance not many amps required

System lifting maximum weight so much more amps required

System lifting nominal weight

System lifting maximum weight but relative increase in amps is not substantial

Explanation of power use in the down direction

System in balance not many amps required

System lowering maximum weight in up so only braking power required

As only braking required, lets give it the benefit and assume nil

Drive Traction Traction Hydraulic HydraulicNo of passengers in cabin 3 avg 7 max 3 avg 7 maxSpeed 0.3 m/s 0.3 m/s 0.3 m/s 0.3 m/sMaximum load capacity 480kg 480kg 480kg 480kgPower for motor (volt) 48 48 415 415Amps drawn for passengers 6 80 50 55Phases required for speed 1 1 3 3Power calculation formula P= phases x A x V x Cos A P= phases x A x V x Cos A

= 1 x 6 x 48 x .9 = 1 x 80 x 48 x .9 = 3 x 50 x 415 x .9 = 3 x 55 x 415 x .9FOR THE UP DIRECTIONS 259 3,456 32,346 35,581 FOR THE DOWN DIRECTIONS 259 259 Nil Nil SUM TOTAL WATTS IN UP + DOWN DIRECTION

518 3,715 32,346 35,581

Supermec vs.hydraulic equivalent

with 3 passengers 518 to 32,346 2%

MUCH LESS ENERGY with 7 passengers 3,715 to 35,581 10%

SOSTENIBILITÀ& EFFICIENZAI N M O S T R A

Lift Shop’s Supermec at European Green Exhibition - 2009 − 2011 ENERGETHICA is dedicated to Sustainable Energy.The Supermec is the only lift system to be invited to this future and green orientated exhibition, held annually in Genoa, Italy,

Only world class companies with technologies proven to provide sustainable reductions in energy are permitted to exhibit.

Lift Shop’s Supermec supplier, ELEVATORI PREMONTATI SrL, is a leading developer and manufacturer in Italy and Europe, distributing lift systems worldwide.

Lift Shop is proud to be the exclusive distributor in Australia for this truly world class, revolutionary technology, and to be part of the (elevatori premontati srl) distribution network.

Lift Shop is a residential lift leader with the most advanced technologies. The incredible success of the Supermec, with its revolutionary Mec drive and traction system, has impressed architects, builders and customers, (and has had competitors desperately trying to fill the gap between the Supermec and the old hydraulic technology).

We look forward to introducing you the ultra quiet, luxurious super reliable Supermec at our showroom, or a demonstration site near you.

For more information on Energethica visit www.energethica.it

minimal energy useenergy consumption calculations


Comments The ultimate in private lifts, state of the art technologies with traction drive

Passengers 7 - 9Run speed (m/s) 0.30 - 0.50Car / platformSize options

• Custom sizes to suit • BCA E3.6 compliant size available (for wheelchair access)• Maximum width 1200mm • Maximum depth 1500mm • Alternate sizes (optional) • Single entry, opposite entry or adjacent through car

Max stops (floors) SixMax travel (metres) 12Environmental impact Uses 13% energy of hydraulic

equivalent due to counter-weight balancing effect and revolutionary traction drive

Control • Automatic buttons with key isolation to the lift cabin • Automatic return to false or nominated floors (optional) • Security features (optional)

Country of manufacture

Italy

Landing buttons • Illuminated and included in door jamb as standard • In separate button box at nearby location (optional) • Security features (optional)

Pit(ffl at bottom floor to pit bottom)

250 - 350mm

Headroom(ffl at top floor to top of shaft)

2800 - 3150mm

Machine cabinet(w) / (d) / (h)

MACHINE ROOM FREE420/215/2100set in wall alongside landing door or up to 7m away from the shaft

Drive mechanism and power requirement

• Quiet Electric Traction Lift with 48v DC motor

• Single Phase 20amp • Energy Consumption: 400w • Trickle fed Batteries permit the

unit to drive for up to 20 runs during a power failure

Door type and options • Automatic sliding doors• Automatic Side Opening • Automatic Centre Opening • Huge range of finishes to select

from including stainless steel and panoramic glass doors

• Range of door widths (600mm – 1000mm) in 50mm increments

• Swing door solutions • Fire rating 1 or 2 hour

Car ceiling height 2060mm- 2150mmMax load (kg) 480 - 630Finishes and selections

Latest Italian designs and styles with customisable options including mirrors, glass walls, custom ceilings, custom coloured stainless steel and manufactured stone floors

Code compliance AS1735 Part 18BCA E3.6AS1735 Part 12 (optional)

ISSUES TO CONSIDER

Building impactAvailable shaft space, and lift car size to be achieved • Shaft construction material, masonry, reinforced concrete • or steelMachine cabinet location •

Landing doors How they look on each landing• Which way will they slide • Call buttons either incorporated into the door jambs or • separate Which finish to the landing doors • Fire rating•

SERVICE AND WARRANTY The Supermec is supplied with a standard three year warranty and one year comprehensive maintenance. This is subject to approved maintenance conditions.

specificationstechnical

Copyright 2011 LIFTSHOP

ELFOLIFT

®

architects choice

SUPERMEC

® FREEDOMLIFT

®

ACCESSALLAREAS with style

design genius reliability + value

NSW: 1/75 Corish Circle, Eastgardens, 2036 T: (02) 9666-3939 F: (02) 9666-3949

VIC: 1/1 Belgium Ave , Richmond, 3121 T: (03) 9421-4222 F: (03) 9421-4333

QLD: Home Ideas Centre 66 Merivale Street , South Bank, 4101 T: (07) 3014-0633

WA: Home Base Expo 55 Salvado Road, Subiaco, 6008 T: (08) 9460-0666

SHOWROOMSAWARDS

Toll Free 1800 440 714 Australia Wide Service www.liftshop.com.au

Australia’s LeadingLuxury Home Elevator Specialist

INNOVATION

Four in a row 2007 - 2010Smart company leading the way.

BUILDING TECHNOLOGIES

designEx 2010 Winner:Lift Shop for FreedomLift

Australia’s premier architectural exhibition recognising the most exciting and innovative new products in the market place

Lift Shop is only the 42nd company in more than 20 years of Fast Growth measurement by BRW to win five or more awards.

BUSINESS PERFORMANCE

2006 - 2010

5 in a row

supermec - home improvement pagesm.homeimprovementpages.com.au/creative/brochures/... · ffl top...

Documents