Super GNA600 Installation Manual

How to Install Honda Diagnostic System Software

In the CD given in the Super GNA600 package, you will find the folders as below.

1. First of all, open up the Install folder. 2. Then you will see Setup.exe file and double click on it to execute the

installer. 3. Follow all the steps on the screen to install the Honda Diagnostic

System software.

4. Upon completion, you will have a message on successful installation. 5. After setting up the Honda Diagnostic System software, you are

required to do the steps below to use your Super GNA600 hardware with the Honda Diagnostic System software.

 

 

6. Open up the Patch folder and click on GNAPatch.exe to run the application.

7. You are required to click on Exit button on GNAPatch.exe after you

successfully patch the software. 8. This is an optional step. If you want to add in Russian language to your

Honda Diagnostic System software, just go to Russian_Patch folder and click on the AddRus.exe. Click on OK upon completion of adding the language.

9. This is an important step in order to make your Ethernet port working

with the Honda Diagnostic System software. Click on the Select Adapter folder, you will find the Select Adapter.exe. Double click on it and you will find a window to select which Ethernet port you would like

 

 

to choose to work with the Honda Diagnostic System software.

10. Please make sure you select the correct ethernet adapter else your

Super GNA600 hardware will not work with the Honda Diagnostic System software.

11. To double check whether you have successfully patch the adapter, you can check your network settings in your Windows operating system. The patched IP address will be 172.16.0.1 and subnet mask will be 255.255.255.0

 

 

12. After completing everything, restart your computer once. 13. You can now see an HDS icon on your desktop and double click it to

work with your Super GNA600. 14. Plug in your Ethernet cable of Super GNA600 and connect your OBD

cable to your car’s OBD port. 15. You will see a green icon on top on the Honda Diagnostic System

software which indicates the software is working fine with the Super GNA600. If you see a red icon, check your cable whether it is plugged in. If it is still not working, check again whether you patched the Select Adapter.exe.

 

 

16. Click on the New Vehicle icon and you will get the menu as below.

17. After the System Initializing, you will come to a window where you need

to select your vehicle’s year and drive. Click enter or tick to go to system menu.

18. Once you reached the system menu, you can now start with the

diagnostic of you car.