1

Summer Veranda Gazebo

Style # L-GZ093PST DPCI # 009/05/0118

Product Size identification: 10’L x 10’W (Between two posts) x10’H Recommended persons for safe assembly: 3.

CONGRATULATIONS – You’ve purchased a fine item from Target. Our clear, easy to follow; step by step instructions will guide you through the project from start to finish. Feel confident that this will be a fun and rewarding project. The final product will be a quality piece that will go together smoothly and give years of enjoyment. All you will need is a screwdriver, a hammer, and a ladder at least 8.2 ft. high (or 2.5m).

2

WARNING: This unit is heavy and big. Do not assemble it alone. When assembling and using

this product, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Please read all the instructions first.

Keep all children and pets away from assembly area. Children should be supervised when in the area of gazebo construction.

Some parts may contain sharp edges, wear protective gloves if necessary.

Keep assembly area at least 6 feet away from any obstruction such as fence, garage, and house, overhanging branches, laundry line or electrical wires.

This is for outdoor use only. Install it on level ground.

Keep all flame and heat sources away from this gazebo. The fabric meets CPAI-84 specifications for flame resistance but it’s not fire proof. It may burn if being left in continuous contact with any flame source. The application of any foreign substance to

the gazebo fabric may render the flame-resistant properties ineffective. Check all nuts and bolts for tightness before and during usage.

Step Identification For ease of identification all parts are labeled to correspond to the Step number in which the part is used.

3

4 pieces 1A Left Frame

4 pieces 1B Right Frame

4 pieces 1C Column

1 piece 2A Center fitting for the second roof

1 piece 2B Hook

4 pieces 2C Short bar for the second roof

4 pieces 2D Medium bar for the second roof

4 pieces 2E Long bar for the second roof

1 piece 3A Canopy for the second roof

1 piece 3B Top center fitting

4 pieces 3C Top roof connector

1 piece 3D Canopy for top roof

1 piece 3E Mosquito net

40 pieces 3E1 Plastic ring for mosquito net

Parts List

4

Hardware Identification

For ease of identification, all hardware is organized into separate hardware packs as below. Actual size is not shown below.

28 pieces (AA) M6×20 screw TBZ01406020HQ

28 pieces (BB) M6 flat washer TBZ10806HQ

Hardware Pack 1

8 pieces (CC) M6×40 screw TBZ00306040HQ

8 pieces (BB) M6 flat washer

8 pieces (DD) M6 nut TBZ20106HQ

1 piece (WW) M6 wrench

12 pieces (GG) Peg TBZ10608180HQ

Hardware Pack 2

4 pieces (CC) M6×40 screw TBZ00306040HQ

4 pieces (BB) M6 flat washer TBZ10806HQ

4 pieces (DD) M6 nut TBZ20106HQ

1 piece (HH）Touch up paint

Hardware Pack 3

5

Fig.3: Attach the arches formed above onto four columns, using screws AA and washers BB, to get a complete frame.

STEP #1 Frames and arches

(x28) (AA) (x28) (BB)

Fig.1，Fig.2: Insert each 1A into each 1B to form four arches for four sides all around, and secure them with screws AA, and washers BB.

6

Warning: Please peg the frame on the ground before going on to the next step. The next step will require a ladder.

STEP #2 Top bars

(x 8) (CC)

(x 8) (BB)

(x 8) (DD)

(x 1) (WW)

(X12) (GG)

Fig.4: Insert 2D into 2C; Fig.5: Screw 2B into 2A, and insert 2C and 2E into 2A separately; Fig.6: Connect the other end of 2E with the arches, using screws CC, washers BB and nuts DD to secure.Fig.7: Fix the other end of 2D with the posts, using screws CC, washers BB and nuts DD to secure.

7

Fig.8: Put 3A onto the top roof. Do not complete it here in order to assemble the second roof.

Fig.9：Insert 3C into 3B, and then use screws CC, washers BB and nuts DD to secure 3C and the bars on the second roof.

Fig.10：Complete fitting the top canopy 3D. Fig.11: Fit the second canopy 3A completely.

Fig.12：Attach mosquito net 3E onto the round bars on 1A and 1B, using 3E1.

STEP #3 Top roof, canopy and mosquito net

(x 4) (CC)

(x 4) (BB)

(x 4) (DD)

8

Care & Maintenance Our steel components for garden accessories and furniture are treated with rust inhibiting paint that protects it from rusting. However, due to the nature of steel, surface oxidation (rusting) will occur once these protective coatings are scratched. This is a natural process

and is not a defect! To minimize this condition, we recommend care when assembling & handling the product to prevent scratching the paint. Should any scratching or damage occur, we recommend immediate touch-up with rust inhibiting paint, which is included in the

package (For Target Store orders only). Surface rust can also be easily removed with a very light application of common cooking oil. If surface oxidation (rusting) occurs and if no measure is taken to prevent this, the oxidation may start dripping on to deck or patio and

cause damaging stains, which may be difficult to remove. This can be prevented if the measure is taken to keep the product from oxidizing. Limited Warranty This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship of your item, provided the item is maintained with care and used

only for personal, residential purposes. The item is warranted to be free from defects in material or workmanship for a period of 1 year. However, we don't reimburse for transportation or delivery costs, or compensate the

individual or any outside party for assembling or disassembling the product. Exclusions: Items used for commercial, contract, or other non-residential purposes, or

items damaged due to acts of nature, vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware is not covered. Proof of purchase (dated register receipt) is required for warranty claims. Warranty is to the original purchaser and is

non-transferable. Any replacement of warranted items will be in the original style and color, or a similar style and color if the original is unavailable or has been discontinued. As some states do not allow exclusions or limitations on an implied warranty, the above exclusions

and limitations may not apply. This warranty gives you specific rights, and you may also have other rights, which vary from state to state.