SUCCESS STORIESOF

NSIC TECHNICAL SERVICES CENTRE(A Govt. Of India Enterprises)

Sector B 24, Ekkaduthangal, Guindy IndustrialEstate, Chennai – 600 032

CNC TRAINING

I am K.Kannan . I did the course in CNC TURNING in NSIC for the period

from 03.05.2011 to 02.06.2011.I am working as Proprietor in Amman Engg.

Works. My salary package is Rs.30 Lcas.

I am D. Vinoth . I did the course in CNC TURNING in NSIC for the

period from 21.09.2012 to 19.10.2012.I am working as Turner in H1- Tech

Precision Compounds. My salary package is Rs.60 Lcas.

I am G. Balasubramaniyam . I did the course in CNC TURNING in NSIC

for the period from 05.12.2012 to 04.01.2013.I am working as Turner in Om

Sri Balaji Engg. Works. My salary package is Rs.15 Lcas.

I am K.Prabu . I did the course in CNC TURNING in NSIC for the period

from 27.01.2014 to 21.03.2014.I am working in Techno Graph. My Month salary

is Rs.8000/-.

I am K. Sheik Rahim . I did the course in CNC TURNING in NSIC for

the period from 27.01.2014 to 21.03.2014.I am working in S.R.I. Nanban

Engineering Works. My Month salary is Rs.6000/-.

I am L.Gowthaman . I did the course in CNC TURNING in NSIC for

the period from 27.01.2014 to 21.03.2014.I am working in Sanmar

Engineering. My Month salary is Rs.8000/-.

I am L.Ranganathan . I did the course in CNC TURNING in NSIC for the

period from 18.07.2012 to 14.08.2012. I am working in Sri Ram Engineering

Industries. My salary package is Rs.15 Lcas.

I am M.Samayan . I did the course in CNC TURNING in NSIC for the

period from 27.01.2014 to 21.03.2014.I am working in Sachi Precision Pvt

Ltd. My Month salary is Rs.8000/-.

I am M.Sasi Kumar . I did the course in CNC TURNING in NSIC for the

period from 18.07.2012 to 14.08.2012. I am working in KMS Engineering

Works. My salary package is Rs.15 Lcas.

I am M.Thayanban . I did the course in CNC PROGRAMMING &

OPERATION in NSIC for the period from 05.06.2013 to 02.08.2013.I am

working as Supervisor in ILJIN Automotive Pvt Ltd.. My salary package is

Rs.1.2 Lcas.

I am M.Tamizhanban . I did the course in CNC PROGRAMMING & OPERATION

in NSIC for the period from 05.06.2013 to 02.08.2013.I am working as Supervisor in

Frontier Engg. Works. My salary package is Rs.1.3 Lcas.

I am P.Selvaraj . I did the course in CNC PROGRAMMING & OPERATION

in NSIC for the period from 29.03.2012 to 28.05.2012. I am working in SVR

Industries. My salary package is Rs.40 Lcas.

I am R.Vellappan . I did the course in CNC TURNING in NSIC for the

period from 06.05.2013 to 05.06.2013.I am working as Turner in Bright Light

Industries. My salary package is Rs.25 Lcas.

I am S.Selvaraj . I did the course in CNC TURNING in NSIC for the period

from 27.01.2014 to 21.03.2014.I am working in Sachi Precision Pvt Ltd. My

salary package is Rs.20 Lcas.

I am V. Kumar . I did the course in CNC TURNING in NSIC for the period

from 06.05.2013 to 05.06.2013.I am working as Turner in Amman Industries.

My salary package is Rs.20 Lcas.

I am V.Rajasekar . I did the course in CNC TURNING in NSIC for the

period from 21.09.2012 to 19.10.2012.I am working as Turner in VRT Engg.

Works. My salary package is Rs.20 Lcas.

ELECTRONICS COURSES

I am S. Karthikeyan . I did the ourse i E edded Desig usi g RTO“ in NSIC during 08.10.2012 to 07.01.2013. The training was very useful

especially during my interview. Presently I am working as Embedded

Developer in M/s.Automatic Control Instruments & Systems . My salary

package is Rs.1.2 Lcas per annum.

I am M. Satham Hussain . I did the ourse i E edded “yste s i NSIC from 18.03.2013 to 17.05.2013. Presently Iam working as VLSI

Engineer in M/s. Mobiveil Technologies India Private Limited il ,

Ekkaduthangal ,Chennai . My salary package is Rs.8000 per month. I thank

NSIC for giving very goof knowledge in VLSI course.

I am R.S. Vinoth Ku ar . I did the ourse i E edded Desig usi g RTO“ i N“IC during the period 05.12.2012 to 04.03.2013. The

training was very useful . I was benefited a lot from this training.

Presently I am working as Developer in Oracle India Pvt Ltd . My salary

package is Rs.2.4 Lcas per annum.

I am Y. Ajith Ku ar . I did the ourse i E edded Desig usi g RTO“ i NSIC for the period from 08.10.2012 to 07.01.2013. I am working as

Software Engineer in Tata Concultancy Services, Bangalore. My salary

package is Rs.2.64 Lcas per annum.

I am Indumathi . I did the ourse i E edded “yste i N“IC for the period from 7/7/2014 to 6/8/2014. The training was very informative . I

got benefited lot from this training. Presently I am working as Embedded

System Engineer in M/s. Electronic Lab, Chennai. My annual salary package

is Rs.3.25Lcas per annum .

I am M.Vinodh Ku ar . I did the ourse i VL“I Appli atio i I dustries i NSIC for the period from 30.01.2014 to 28.03.2014. The training was very

informative . We were benefited a lot from this training. Presently I am

working as Program Analyst in CTS. My salary package is Rs.3 Lcas.

I am U. Anandha Ganapathy . I did the course in E edded Design using

RTO“ in NSIC for the period from 06.08.2012 to 05.11.2012. Presently I am

working as Consultant in M/s. Bhavini Power . My salary package is Rs.1.2 Lcas.

I am J. Sathyamoorthy . I did the ourse i E edded Desig usi g RTO“ i NSIC for the period from 04.09.2012 to 03.12.2012. I am working as Design

Engineer in M/s. Presevi Industrial company Chennai. My salary package is

Rs.1.2 Lcas.

I am K. Mahommed Abubacker . I did course i E edded “yste s i N“IC for the period from 07.11.2012 to 04.01.2013. I thank NSIC for giving very

good knowledge in Embedded. Presently Iam working as Embedded

Developer in M/s. Soft Trend, Tambaram, Chennai . My salary package is

Rs.8000 per month.

I am A.Akilan . I did the ourse i “yste Ad i istratio usi g IBM AIX “er er i N“IC for the period fro . . to . . . The trai i g was very informative . We were benefited a lot from this training. Presently I

am working as Assistant System Engineer in Tata Consultancy Services. My

salary package is Rs.3,18,887Lcas.

I am A.Naveen . I did the ourse i “yste Ad i istratio usi g IBM AIX “er er i N“IC for the period fro . . to 03.03.2014. I am working

as Beta B in M/s.i Gate. My salary package is Rs.3.15 Lcas. I thank NSIC for

giving very good course.

Iam Ms.Harini Sekar. I ha e do e “yste Administration usinf IBM AIX

ser er ourse i N“IC .The class was very useful to our career and lot of

general information was also provided so it was a informative and useful

course . Iam working in M/s. HCL as Assistant System Engineer with a salary

package of Rs.3.5 lacs per annum

I am J.Abishek . I did the ourse i “yste Ad i istratio usi g IBM AIX “er er i N“IC for the period fro . . to . . . Presently I am

working as Assistant System Engineer in M/s. Tata Consultancy Services. My

salary package is Rs.3.18 Lcas

I am K Jegan . I did the ourse i “yste Ad i istratio usi g IBM AIX “er er i N“IC for the period fro / / to / / . The trai i g was very informative . We were benefited a lot from this training. I am

working as System Engineer in M/s. Infosys, Mysore. My annual salary

package is Rs.3.25Lcas.

I am K.Gayathri . I have done a course “yste Ad i istratio usi g IBM AIX “er er from NSIC during the period 04.01.2014 to 03.03.2014.

The training given was very excellent . I am working as Assistant System

Engineer in Tata Consultancy Services. My salary package is

Rs.3,18,887Lcas. I thank NSIC for making me get job in my core.

I am M.Abinaya . I did ourse i “yste Ad i istratio usi g IBM AIX “er er i N“IC for the period fro . . to 03.03.2014. I was benefited

lot from this training. Now , I am working as Assistant System Engineer in Tata

Consultancy Services. My salary package is Rs.3,18,887Lcas.

I am M.Ramya . I did “yste Ad i istratio usi g IBM AIX “er er i N“IC (04.01.2014 to 03.03.2014). The training was very good. Presently I am

working as Beta B in i Gate. My salary package is Rs.3.15 Lcas.

I J.Miriam sneha studied “yste Ad i istratio usi g IBM AIX “er er i NSIC Technical services centre,Chennai during the period from 06.02.2014

to 04.04.2014 . The course was very useful for me in clearing my interview

. I am placed in M/s. Infosys as System Engineer. My salary package is 3.25

Lacs per annum. I thank NSIC for giving me very good knowledge in IBM

server which fetched me a job.

I am N. Nachammai . I did “yste Ad i istratio usi g IBM AIX Server

in NSIC from 08.02.2014 to 07.04.2014. The training was very informative .

Presently I am working as Data processing Analyst in M/s. Truven Health

Analytics , Chennai (DLF). My salary package is Rs.15,000 per month.

I am V.Hariharan . I have done a ourse i “yste Ad i istratio usi g IBM AIX “er er i (04.01.2014 to 03.03.2014). The syllabus and the

teaching was very good. I am working as Assistant System Engineer in Tata

Consultancy Services. My salary package is Rs.3,18,887Lcas.

I am Velu Volu Roja Rani . I did the course in “yste Administration

using IBM AIX “er er in NSIC for the period from 04.01.2014 to

03.03.2014. I was benefited a lot from this course . Presently I am

working as Assistant System Engineer in Tata Consultancy Services. My

salary package is Rs.3.18 Lcas.

I Asvin G. did the ourse i Ad a ed Net orki g usi g CI“CO Routers i N“IC for the period from 30.12.2013 to 28.03.2014. The training was very useful for

me . Presently I am working an Engineer in HCL Technologies. My salary package

is Rs.2.75Lcas.

I am G.Prem Kumar . I did the course in Ad a ed Networking using CISCO

Routers in NSIC for the period from 30.01.2014 to 28.03.2014. Presently I am

working as Network Support Engineer in M/s.CSS Corpn. My salary package is Rs.3

Lcas. I thank NSIC TSC was giving good knowledge in networking .

I am Kunaal Khilani . I did the ourse i Ad a ed Net orki g usi g CI“CO Routers i N“IC for the period fro . . to 8. . . The trai i g was very informative . Presently I am working as System Engineer in M/s.

Infosys. My salary package is Rs.3.25 Lcas.

I a pra esh Ku ar G I did the ourse i Ad a ed Net orki g usi g CI“CO Routers i N“IC for the period fro . . to 8. . . The trai i g was very useful . I got a job and working as Engineer in M/s. Hexaware . My

salary package is Rs.2.50 Lacs per annum.

I am M. Priyanka Shanthini . I did the course in Ad a ed Networking

using CISCO Routers in NSIC for the period from 30.01.2014 to 28.03.2014.

The training was very knowledgeable. Presently I am working as JAVA

Development in M/s.Infosys. My salary package is Rs.3 Lcas per annum.

I am S. Balakandhan . I did the ourse i Ad a ed Net orki g usi g CI“CO Routers i N“IC for the period fro . . to 8. . . The trai i g as very useful and informative. Presently I am working as System Engineer in

Infosys. My salary package is Rs.3.25 Lcas.

I am A.Yoga sruthi . I did the ourse i Ad a ed Net orki g usi g CI“CO Routers i N“IC for the period fro . . to 8. . . The training was very informative . We were benefited a lot from this training.

Presently I am working as Engineer in HCL Technologies. My salary package

is Rs.2.75Lcas.

I am P.Jagan . I did the ourse i VL“I Appli atio i I dustries i N“IC for the period from 30.01.2014 to 28.03.2014. The training was very

informative . We were benefited a lot from this training. Presently I am

working as System Engineer in Infosys. My salary package is Rs.3.25 Lcas.

Iam Balaji . I did ourse “Y“TEM ADMINI“TRATOR i N“IC. Both the teaching and the amount of subject knowledge

transferred to me was very good .

Designation: Asst. System Engineer- Trainee

Company: Tata Consultancy Services Ltd.

Salary: 3.18 lakhs per annum

I am D.Bharathi Raja . I did the course in “er i i g & Mai te a e of Laptop/ Ta let/PC in NSIC for the period from 09.12.2013 to 07.02.2014.

The training helped e to start y o usi ess. My o pa y’s a e is M/s. Dhanasekaran Computer Centre. I earn around Rs.10,000/- per month.

I am S.Manikandan. I did the course in “er i i g & Maintenance of Laptop/

Ta let/PC in NSIC for the period from 02.09.2013 to 01.11.2013. The

training was very informative. I have started my own business in laptop

servicing . My comapany M/s. User plus Services. I earn Rs.20,000/- per

month. I thank NSIC for motivating me to become an Entrepreneur.

PLC SCADA

I am P. Paulin vino enrolled in NSIC for PLC. PLC programming designing becomes easy and understanding the machines

circuit become simple for me after doing PLC course .I very much attracted due to teaching with more number of practical

examples. Date of completion of course is 17.10.2014. I am Working in Dynamic control panel , Chennai from 23.10.2014 as

Production Engineering

I am M. Jeyaprakash enrolled in NSIC for PLC course. I got PLC technician job in a company .I am able to do service all

automated machines running in my company whenever it become failure. The PLC course studied is very much useful when I

am doing service. Date of completion of course is 17.10.2014. I am Working in Verizon data service India Ltd, Chennai from

23.10.2014 as Maintenance Engineering

I am M. Balaganesh took admission in NSIC for PLC training. At NSIC

Faculty teaching methods for the PLC troubleshooting class were greatly impressive. They knew when to slow down to help

those that were not completely understanding. The class highly recommended and faculty makes it a great experience for

everyone. Date of completion of course is 15.09.2014. I am working in Avalon technology , Chennai from 02.10.2014 as

Quality Engineering.

I am G. Aravindhan, I take admission in NSIC for PLC Course. One of the best hands-on classes I have attened.The hands –on

portion really added to my limited experience in PLC. Training is more useful while facing interview questions and to get job

in short time. Date of completion of course is 15.09.2014. I am working in Avalon technology , Chennai from 02.10.2014 as

Quality Engineering.

I enrolled for PLC course at NSIC . NSIC gives best PLC training, they focus on each individual to get well trained practically

on many plc brand. I personally recommend this institute because my brother studies here, says good about it. Date of

completion of course is 15.09.2014. I am working in Acolyte , Chennai from 30.10.2014 as HR.

I am V.Sibi chakaravarthy enrolled for PLC SCADA.

Four PLC and 1 SCADA software, Electrical control wiring Course teaching and course material are very much helpful while

preparing for interview. Date of completion of course is 15.09.2014. I am working in Acolyte , Chennai from 30.10.2014 as

HR

I am Raten Raj took admission in PLC Course at NSIC. Today, PLC are being used in every Process & Manufacturing

Industries, besides knowing the Wiring & Connection, one must know how to program a PLC. Unless, you know how the brain

works, it's extremely difficult to troubleshoot a process. This course will explain how you can Wire, Design & Program a PLC.

Date of completion of course is 14.08.2014. I am working in Aster pvt ,Ltd, Bihar from 26.09.2013 as Site Engineer.

I am K. Ramkumar took admission in PLC Course at NSIC. The PLC training often presents the workshop by introducing a

concept in a lecture format followed by a set of “key principles” that fortify the particular concept. Date of completion of

course is 14.08.2014. I am working in Mophersvni System pvt ,Ltd Chennai from 18.07.2014 as Testing Engineering

B. Ananthakannan

9791392054

PLC patient and let the learning process sink in through the use of real life examples and much needed repetition during the

skills practice session. Date of completion of course22.07.2014. Workingin company Bharathi electrical , Chennai

Working from25.07.2014 as Supervisor

K. Karthikkumar

9791459124

Credit goes to stuff of NSIC, thank you for given me coaching in an effective manner in PLC and SCADA. More number of

real time plc applications is creating.

Date of completion of course22.07.2014. Workingin company Bharathi electrical , Chennai Working from25.07.2014 as

Supervisor

Anandha Sundara

Pandian.A

9940970980

First of all, I wish to thank NSIC Chennai for creating such a wonderful course. This course includes the basic theories of control circuits,

concepts of PLC, programming commands of PLC and application of PLC commands in real world scenario, which are all necessary and

vital to enhance the learning process. I highly recommend this course to anyone who wishes to learn PLC programming.

Date of completion of course22.07.2014. Workingin company Gamesa wind turbines Pvt Ltd, Chennai Working from

20.11.2014 as Control And Monitoring Engineering

Krishna.K.S

8056111581

PLC Automation is one among the best service providers for NSIC training institute in Chennai. They follow the best methods

in providing quality service and the best costs. I would always prefer PLC and Suggest others to prefer NSIC. Date of

completion of course 8-4-2014 . Working in company FSS , Chennai Working from 22.06.2014 as software Engineering

K.Harish

9962779439

NSIC teaching is beyond professional teaching. He is so good in the field with a very high degree of concern for his students.

You won't feel student-instructor thing with him but having a discussion with a close friend. Thanks to faculty and to NSIC

team for making this course possible. Date of completion of course 8-4-2014 . Working in company HCL , Bangalore

Working from 02.06.2014 as software Engineering

B.Divakaran

8870852657

Being a Mechatronic Engineer, my main concern was to master all types of PLCs. I've searched for different courses on PLC,

and a friend of mine recommended me to NSIC Technical service center. This is my 6rd week with PLC course, and I really

feel so confident now in solving complex PLC programming. Date of completion of course 8-4-2014 . Working in

company Telelink Automation , Chennai Working from 17-7-14 as Service Engineering

Moorthi.K

9789699201

NSIC explained each & every instructions in the plc in a very detailed manner so that any one can understand the concepts

behind this instructions,very clear explanation, those who wants to know basic & advanced fundamentals of PLC & SCADA ,

Date of completion of course 15-4-2014 . Working in company Petro 6 EC ,Chennai Working from 30-5-14 as Service

Engineering

V.Saravanan Kumar

9677495757

Wonderful Experience in NSIC with well equipped PLC and SCADA lab, Instruction given by staff was effective and very

useful. I will be able to find job by using this certification. , Date of completion of course 17-01-2014 . Working in

company ACS Refrigeration , Chennai Working from 20-2 -14 as Project Engineering

H. Suchendran

9500185443

It enhanced my knowledge and valuable tips in PLC and SCADA worth studying here. Bottle filling plant and batch process

are very much useful me. , Date of completion of course 17-1- 14 . Working in company Flextronics , Chennai Working

from 5-4-14 as Service Engineering

V. Saravanan

9486709829

Training sessions are excellent opportunities to demonstrate your bottle filling plant. It was very use full for me and I will

recommend to Friends also. , Date of completion of course 27-12- 2013 . Working in company Siva Industrial ,

Coimbatore Working from 10-3-14 as Service Engineering

S. Lashmanan

9842915329

The PLC course is good for me to enter into the automation field. I learned lot of ideas and knowledge form faculty. Explains

Practical control system for temperature, pressure and electrical. , Date of completion of course 15-4-2014 . Working in

company A.V Engineering Visakapattanam

Working from 20-2-14 as PLC Machine Operator

S.Sivakumar

8015173156

Course focus on real time topics and techniques that PLC in the most easy and reliable way .I feel that course is very much

helpful and deserving one for my future carrier. , Date of completion of course 15-11-2013 . Working in company Sri Ram

Institute of Industrial Research Pvt, Ltd, Bangalore Working from 16-3-14 as Service Engineering

M. Sathish Kumar

9962226764

I upgraded my knowledge in PLC through NSIC training course and course material. It’s important to develop a training

method that is more practical and application to their learning styles and preferences. , Date of completion of course 1-10-13 .

Working in company Indus Towers ,Chennai Working from 11-11-13 as Supervisor

S.Anbarasu

9600159757

The PLC challenges involved in learning a new skill as well as their inability to adequately it. This course will explain how you

can Wire, Design & Program a PLC. , Date of completion of course 1-10-13 . Working in company Micro Electrical, Chennai

Working from 20-8-13 as Testing Engineering

X. Raisonberinanto

9488626051

NSIC start with hand –on classroom training, software simulation and hand outs that reflect your actual facility equipment .The

faculty is friendly knowledgeable and teaching in lucid understandable manner. , Date of completion of course 4-9-13 .

Working in company Petro 6 EC ,Chennai Working from 5-10-13 Senior Technical

P.Dinakaran Selvan- Reverse Engineering-

Working as Technician in Lanson Toyota

This course has helped me in getting Job. The basic design knowledge help me in

managing and understanding the diagrams relating to my work .The knowledge also

helped me in getting incentive at my work place.I thank NSIC for for giving this

opportunity.

P.Thangapandian-Reverse Engineering

Working as Diploma Engineering Training in NVH India Auto Part Pvt.Ltd

This core has helped me in getting job in core discipline. I am now serving as

Diploma Engineering Training in Production Department in NVH India Auto Part. The

course gave me the added advantage over other candidates. I thank NTSC for giving

me this opportunity.

A.Vijay- Auto CAD- Jan 2014- Mar 2014

Quality Inspector

In quality inspection we regularly need to inspect products based on the Blue Print copy of

the product. The knowledge of Auto CAD Drafting helped me in making correction in design.

I thank NTSC and TNSD for providing me the opportunity.

R.Ramkumar-Auto CAD- Jan 2014- Mar 2014

Draughtsman in Piping Design

The course gave me immense practice in Auto CAD 2014.The computer knowledge and

designing in CAD software has made me a lead to my team of designers. I thank NSIC for

providing the right platform for designer.

N.Venkatesh – Reverse Engineering

Technician in Videocon

This course helped me in understanding the design of various products and there

fitments. The course has helped me as technical person .I thank NSIC for giving this

opportunity . I will refer this course to my friends.

B.Kishore Kumar- Auto CAD -Jan 2014- Mar 2014

Asst.Designer in Polaris CAD Solutions

I am helping my team in designing the Spares for various Automobile Company. We use

Auto CAD for creating the Blue Print . I thank NSIC in giving me the right platform at

the final year of my coures.

V.Leelavathi- Auto CAD- Jan 2014- Mar 2014

Trainer in Computer Institute

The training helped me to design and structure the course for my students. Now I

am an Instructor in Vocational Training Institute. Thank you NSIC.

J.Jerons- Auto CAD- Jan 2014- Mar 2014

Disigner in Pulsar Pvt Ltd

The course gave me the opportunity to take training in Auto Cad. It is essential for

any designer to have knowledge about Cad Software. Auto cad is widely used.

NSIC Technical Services Center is the best place to learn.

C.Sukumar-Auto CAD- Jan 2014- Mar 2014

Trainee in IPL

The course gave me advantage over other candidate during Interview. It is also

helping me in my regular activities in Work Place. I thank NSIC and TNSD.

N.Padmapriya- Auto CAD- Jan 2014- Mar 2014

Asst.Draughtsman in Royala Towers Pvt Ltd

This course has given me the opportunity to understand 2D,3D design and

modeling. The drafting knowledge helped me a lot during my interview and also

now in my work place. I thank TNSD and NSIC for giving me this wonderful

Course.

CAD CAM

MY SUCCESS STORY WITH NSIC-TSC (CAD/CAM)

I completed my B.E Mechanical engineering degree in 2013 .Thereafter, I came to Chennai, searching for a job. But I couldn’t get a job in the relevant field. Meanwhile, I got an opportunity as a GAT in NSIC-TSC on October, 2013.

During one year training I learned the recent technology in 3D Modelling using CAD-CAM Software. I also learned CMM and Reverse Engineering techniques. I also supported my superiors in conducting training courses on CAD-CAM Software. I completed my GAT in October, 2014 and immediately got placed in Thiruppathy R&D Engineering Solutions, Chennai as a CAD Design Engineer. I thank NSIC-TSC for the training provided to me which has enhanced my skills and confidence to face any challenge in my career.

I request everyone to undergo appropriate training in their line of interest to increase their professional skills for better employability.

(S.Mohamed Abdul Sukkoor. B.E.,)

MY SUCCESS STORY WITH NSIC IN CAD/CAM

I am Vignesh S, Completed B.E MECHANICAL 2012 passed out and was in keen to enter into CAD/CAM Domain.

I attended interview in NSIC for GATone year in CAD/CAM & CMM, Reverse EngineeringDevelopment with current industries exposure through this trai

After completing my training I got selected in EGS Computers India Pvt Ltd as Solidworks, EPDM & Inspection). My career is going great because of this training undergone in NSIC.

My Sincere Thanks to NSIC Technical Training Centre & my hearty thanks to Mr. R. Balasubramanian Chief Manager-Tech for this great opportunity.

KodambakkamChennai-600024.

MY SUCCESS STORY WITH NSIC IN CAD/CAM

I am Vignesh S, Completed B.E MECHANICAL 2012 passed out and was in keen to enter into

(Graduate Apprentice Trainee).Got Selected, and went training for CAD/CAM & CMM, Reverse Engineering. Gained immense knowledge in product Design

Development with current industries exposure through this training.

After completing my training I got selected in EGS Computers India Pvt Ltd as Application EngineerSolidworks, EPDM & Inspection). My career is going great because of this training undergone in NSIC.

My Sincere Thanks to NSIC Technical Training Centre & my hearty thanks to Mr. R. Balasubramanian Chief Tech for this great opportunity.

I am Vignesh S, Completed B.E MECHANICAL 2012 passed out and was in keen to enter into

(Graduate Apprentice Trainee).Got Selected, and went training for . Gained immense knowledge in product Design

Application Engineer ( Solidworks, EPDM & Inspection). My career is going great because of this training undergone in NSIC.

My Sincere Thanks to NSIC Technical Training Centre & my hearty thanks to Mr. R. Balasubramanian Chief

TALLY

SUCCESS STORIES OF OUR TRAINEES

I am S.Ashwin. I did Tally course in NSIC during the period from 02.01.2014 to 28.03.2014. Presently I am working In Cape Gemini Chennai as Accounts Trainee. My salary package is Rs. 1.80 lacs per annum. Training in Tally gave me pratical experience how to maintain books of Accounts which has uplifted my career.

Hai I am R. Ranju who underwent Tally training in NSIC during Jan 2014 to March 2014. Now I am working in Tata Consultancy Services my salary is Rs. 12000/- per month. I thank NSIC for giving me an opportunity to undergo training in your Institute.

This is D. MeryinBritto who underwent Tally training in NSIC during Jan 2014. Now I am working as Accountant in ICICI Bank. My salary is Rs. 10000/- per month. I gained pratical and theorticalknowledge from Training and I am very grateful to NSIC

I am M.sathishkumar who did tally training in NSIC during Jan 2014 to March 2014. I am now working as Finance Analyst in Data Tracjs Services Pvt ltd, and my monthly salary is RS 10000/- per month. I thank NSIC.

I am A.G Ashok Kumar who underwent Tally training during Jan – March 2014. Now i am working in Tata Consultancy Services and my salary package is Rs. 1.2 lakhs per annum. I gained more knowledge during training which was helpful during interview so I am very thankful to NSIC.