submittal package/item approval comment and stamp …

12
SUBMITTAL PACKAGE/ITEM APPROVAL COMMENT AND STAMP SHEET Fortis Construction Pte. Ltd.'s Comment and/or Stamp Consultant's Comment and/or Stamp

Upload: others

Post on 07-Jan-2022

4 views

Category:

Documents


0 download

TRANSCRIPT


SUBMITTAL PACKAGE/ITEM APPROVAL COMMENT AND STAMP SHEET

Fortis Construction Pte. Ltd.'s Comment and/or Stamp

Consultant's Comment and/or Stamp

Syahrizan.Selamat
SGA Stamp
Syahrizan.Selamat
Text Box
Product data as per Cl. 1.03 Submittals
Craig (Aedas)
Microsoft Word - A_Stamp
Craig (Aedas)
Text Box
13.03.20

E.MIX EASI SCREED ECO FOR PROJECT SGA-

EXTERNAL SERVICES BUILDINGS AND

STRUCTURES

Est

Date :13/01/2020

SGA

EXTERNAL SERVICES BUILDINGS

AND

STRUCTURES

aung
Typewriter
Page 1 of 11

E.MIX EASI SCREED ECO FOR PROJECT SGA-

EXTERNAL SERVICES BUILDINGS AND

STRUCTURES

Est

Date :13/01/2020

S.NO DESCRIPTION PAGE

1 CONTENT 2

2 CATALOGUE 3

3 SGBC Cert-Easi Screed Eco 5

4 SAFETY DATA SHEET 6

5 TEST REPORT 8

6 PROJECT REFERENCES 11

aung
Typewriter
Page 2 of 11

USES

SCREED

E.MIX Easi Screed Eco

TECHNICAL DATA & PHYSICAL PROPERTIES

E.MIX Easi Screed Eco is a specially blended premixed mortar forlevelling rough and uneven concrete floors as underlayment oroverlayment. E.MIX Easi Screed Eco contains recycled material and is agreen-labelled product endorsed by the Singapore Green BuildingCouncil. E.MIX Easi Screed Eco provides a suitable substrate to receiveceramic and homogeneous tiles, marble and granite slabs under interiorand exterior conditions.

Eco-friendly mortar for screeding and levelling of concrete floors

Colour GreyBinder Ordinary Portland Cement/Blastfurnace SlagFiller Graded SandAdditives Improve consistency, workability and adhesionDensity 1.9 kg/litre (dry); 2.0 kg/litre (wet)Thickness 15 - 75 mmWater Demand Approx. 13-15 % or 5.2-6.0 litres/40 kg bagPot Life 1 hourCompressive Strength > 25 N/mm²(ASTM C349: 2014)Flexural Strength > 4 N/mm² (ASTM C348: 2008)Shrinkage No cracks(Coutinho Ring)

E.MIX Easi Screed Eco is designed for levelling rough and uneven concrete floors as underlayment oroverlayment. It is also applicable for making slopes with thickness between 15 to 75 mm. E.MIX EasiScreed Eco is suitable to be used as a block/brick laying mortar.

CONSUMPTION

Approx. 1.8 kg/m²/mm thick

SINGLECOMPONENT

ECO-FRIENDLY

PRODUCTBENEFITS

EASYAPPLICATION

PROCEDURE & APPLICATION

No further addition of water is allowed to unused mortar that has exceeded its pot life or has begun to set.

EMIX INDUSTRY (S) PTE LTD - 201223252K2 Venture Drive, #09-10 Vision Exchange, Singapore 608526

+65 63308288 [email protected]+65 63635988 www.emixgroup.com WEBER – E.MIX Singapore

aung
Typewriter
Page 3 of 11

STORAGE & PACKING

E.MIX Easi Screed Eco is available in 40 kg bags.Shelf life of 12 months if product is kept in sheltered and dry place.

HEALTH & SAFETY

E.MIX Easi Screed Eco contains cement, which may produce an allergic effect. Material may causeirritation to eyes and skin. In case of contact with eyes, rinse immediately with plenty of water and seekmedical assistance. After contact with skin, wash immediately with plenty of soap and water. Pleasekeep out of reach of children.

PROCEDURE & APPLICATION

Ensure substrate is clean and sound. Remove loose particles, grease and traces offoreign materials that may affect adhesion.

Mix product with the required amount of clean water. Mix thoroughly with a mechanicalmixer until mixture is homogeneous.

E.MIX Easi Screed Eco can be placed manually by hand or machine pumped. Mortar levelpads are recommended to ensure correct and proper levelling or sloping of E.MIX EasiScreed Eco. Floor laid with E.MIX Easi Screed Eco should be cured for at least 24 hoursprior to tiling works.

For thicker applications with several layers, the layer underneath must be hardened anddry before applying the subsequent layer.

The wear resistance and adhesion of E.MIX Easi Screed Eco can be further enhanced bythe addition of E.MIX Render Admix or E.MIX Bond Admix.

SCREED

E.MIX Easi Screed EcoEco-friendly mortar for screeding and levelling of concrete floors

*Note: Because it is not possible to give specific instructions for the various site conditions or to control the applications, the informationon this Technical Data Sheet is for general guidance only. Emix Industry (S) Pte. Ltd. reserves the rights to amend the contents of thedata sheet at its sole discretion. (Jan ’19)

EMIX INDUSTRY (S) PTE LTD - 201223252K2 Venture Drive, #09-10 Vision Exchange, Singapore 608526

+65 63308288 [email protected]+65 63635988 www.emixgroup.com WEBER – E.MIX Singapore

aung
Typewriter
Page 4 of 11
Craig (Aedas)
Cloud+
Craig (Aedas)
Cloud+
AED comment: Forits/ TopPave to ensure the manufacturers procedures are followed
Craig (Aedas)
Cloud+
Craig (Aedas)
Cloud+
AED comment: Bonding agent submission required if intended to be used
aung
Typewriter
Page 5 of 11

SAFETY DATA SHEET

Date of Issue: 01/03/2018 Supersedes SDS_Easi Screed Eco (201503) Rev.02

SDS_Easi Screed Eco (201803) EMIX - A SAINT-GOBAIN BRAND Page 1 of 2

Registration No.: 201223252K 2 Venture Drive, #09-10 Vision Exchange, Singapore 608526

T: 6363 5340 F: 63635988 E: [email protected] www.emixgroup.com

1. PRODUCT AND COMPANY INFORMATIO\N Product Name : EASI SCREED ECO Product Description : EASI SCREED ECO is used for screeding and levelling of concrete floor. Company Information : This product is marketed by: Emix Industry (S) Pte. Ltd. 2 Venture Drive, #09-10 Vision Exchange Singapore 608526 Tel: 6363 5340 Fax: 6363 5988

2. INFORMATION ON INGREDIENTS This preparation is a cementitious mix based on Portland cement, slag cement, graded sand and other chemicals. Detailed information of contents is confidential.

3. HAZARDS IDENTIFICATION The product is a dry-mixed powder and may cause irritations to the skin, eyes or when inhaled or ingested.

4. FIRE FIGHTING MEASURES Inorganic powder, will not burn or support combustion. Compatible with all standard fire fighting techniques. No special

procedures required.

5. FIRST AID MEASURES Ingestion : Do not induce vomiting. Wash mouth with water. Give half pint (300 ml) water to drink and

seek precautionary medical advice if necessary. Inhalation : Remove to fresh air and rest. In the event of respiratory difficulties, apply standard first aid

techniques as appropriate to the condition of the patient and get immediate medical attention.

Skin : Wash with plenty of water. Seek medical advice if any irritation persists. Eyes : Wash out immediately with plenty of water or normal saline solution and obtain medical

advice at once.

6. ACCIDENTAL RELEASE MEASURES Contain spillage. Take precautions against excessive dust exposure (use approved respiratory protection), shovel into bags or

other suitable containers. Small spillages may be washed to drain with plenty of water. Spillages which become damp will set and harden. Clean up spillages promptly.

7. EXPOSURE CONTROLS Engineering Controls : General or local ventilation as necessary to prevent any excessive dust exposure. Personal Protection : Although not classed as dangerous these preparations should be handled in accordance

with good industrial hygiene and safety practices. The following “good practice” precautions are recommended.

Wear suitable overalls. Wear suitable gloves and eye protection. No eating, drinking or smoking in the workplace. Wash off splashed as soon as possible. Avoid inhalation of dust. Wear suitable respiratory protective equipment if working is confined spaces with

inadequate ventilation. Advice on respiratory protective equipment is given in British Standard BS 2091 and BS 4275 and the HSE publication HS(G)53.

aung
Typewriter
Page 6 of 11

SAFETY DATA SHEET

Date of Issue: 01/03/2018 Supersedes SDS_Easi Screed Eco (201503) Rev.02

SDS_Easi Screed Eco (201803) EMIX - A SAINT-GOBAIN BRAND Page 2 of 2

Registration No.: 201223252K 2 Venture Drive, #09-10 Vision Exchange, Singapore 608526

T: 6363 5340 F: 63635988 E: [email protected] www.emixgroup.com

8. STORAGE AND HANDLING No special conditions. Store in a dry and sheltered place away from moisture and water which can cause the product to set and

hardened.

9. PHYSICAL AND CHEMICAL PROPERTIES Appearance : Grey Powder Odour : Typically cementitious in odour pH : Alkaline Solubility : Insoluble

10. STABILITY AND REACTIVITY Stability : Stable at normal temperatures when kept dry. When wet, sets to a hard lump

with evolution of small amounts of heat. Materials and Conditions to avoid : None known Hazardous Decomposition Products : None known in normal applications.

11. ECOLOGICAL INFORMATION Not biodegradable. Long term ecological effects are as for any cement / concrete product.

12. DISPOSAL CONSIDERATIONS Carefully dispose of excess product and packaging by collecting for disposal as a trade waste in accordance to local authority

guidelines.

13. TOXICOLOGICAL INFORMATION Ingestion : No specific data available. Not regarded as harmful by ingestion. Unlikely to be any

serious ill effects. May caused minor upset or irritation to the digestive system. Inhalation : Dust arising from this preparation is not likely to cause significant disease or toxic effect if

exposure is kept under reasonable control. Long-term exposure may cause inflammation of lining of the respiratory system.

Skin Contact : Prolonged contact may cause irritation especially if wet. Eye Contact : Will cause discomfort and irritation.

14. TRANSPORT INFORMATION No special packaging requirements. Product is non-combustible and not dangerous for land, sea and air (under IATA) transport.

15. REGULATORY INFORMATION Not classified as dangerous but can be an irritant.

16. OTHER INFORMATION The information given is based on our knowledge of this product, at the time of publication. It is given in good faith. Any

suggestion and recommendations made are without guarantee and liability since conditions of use are beyond our control. Appropriate warnings and safe handling procedures should be provided to all those who handle and use the product and no liability can be accepted for any loss, injury or damage resulting from its use.

aung
Typewriter
Page 7 of 11
aung
Typewriter
Page 8 of 11
aung
Typewriter
Page 9 of 11
aung
Typewriter
Page 10 of 11

Project References for Easi Screed Eco

Projref-Easi Screed Eco (201706) EMIX - A SAINT-GOBAIN BRAND (Jun 17)

Registration No.: 201223252K 2 Venture Drive, #09-10 Vision Exchange, Singapore 608526

T: 6363 5340 F: 6363 5988 E: [email protected] www.emixgroup.com

S/NO PROJECTS NAME CONTRACTORS NAME YEAR

1) MANDAI DEPOT AT LORONG LADA HITAM PING TAN CONSTRUCTION PTE LTD 2017

2) C931 MACPHERSON MRT AT CIRCUIT LANE TOP PAVE PTE LTD 2017

3) CHANGI SOUTH AVE 1 (C922-EXPO MRT STN) TOP PAVE PTE LTD 2017

4) C922 AT CHANGI BUSINESS PK AVE 1 YOO SEONG ENGINEERING PTE LTD 2017

5) STRATUM CONDO AT 80 ELIAS ROAD/PASIR RIS DR 3 CKR CONTRACT SERVICES PTE LTD 2015

6) AYER RAJAH AVE - MEDIACORP COMPLEX KAJIMA OVERSEAS ASIA PTE LTD 2015

7) SCHOOL AT PUNGGOL DRIVE -LP8 BHCC CONSTRUCTION PTE LTD 2016

8) THE AMORE AT PUNGGOL CENTRAL / KEONG HONG CONSTRUCTION PTE LTD 2016

9) NTU AT NAN YANG AVE/NAN YANG CRES. KIAN HUP ENGINEERING PTE LTD 2016

10) PARC OLYMPIA AT FLORA DRIVE KOH BROTHERS BUILDING & CIVIL 2016

11) 1189 UPPER SERANGOON ROAD [MIDTOWN] LIAN BENG CONSTRN (1988) P/L 2016

12) OXLEY TOWER AT 138 ROBINSON ROAD LIAN BENG CONSTRN (1988) P/L 2016

13) CONDO AT 26 NEWTON ROAD NOVELTY BUILDERS PTE LTD 2016

14) 334 PASIR PANJANG ROAD - WHITEHAVEN RICH-LINK CONSTRUCTION PTE LTD 2016

15) CAPITOL PROJECT AT NORTH BRIDGE ROAD SHIMIZU CORPORATION 2016

16) GUOCO TWR - WALLICH ST (NEAR TG PAGAR MRT) BENG KHIM CONSTRUCTION CO PTE LTD 2017

17) HOSPITAL AT 1 ANCHORVALE STREET CGW CONSTRN & ENGRG (S) PTE LTD 2017

18) THE VALES AT ANCHORVALE CRESCENT CHINA CONSTRN (SOUTH PACIFIC) DEV CO P/L 2017

19) THE SANTORINI AT TAMPINES AVE 10, LP 43 CHINA JINGYE ENGRG CORPORATION LTD 2017

20) D'NEST CONDO AT 131 PASIR RIS GROVE DAEWOO ENGRG & CONSTRUCTION CO LTD 2017

21) PUNGGOL FIELD WALK - FLO RESIDENCE ENG SENG LEE CONSTRN CO P/L 2017

22) VUE 8 RESIDENCE AT PASIR RIS DRIVE 3 ENG SENG LEE CONSTRN CO P/L 2017

23) THE PINES HOTEL AT NO 30 STEVEN ROAD EVAN LIM & CO PTE LTD 2017

24) NURSING HOME AT 705 SERANGOON ROAD GUAN HO CONSTRUCTION CO PTE LTD 2017

25) HOTEL AT 7 WALLICH ST (NEAR TG PAGAR MRT) KOBE CONSTRUCTION PTE LTD 2017

26) CONDO AT WESTWOOD AVENUE KOH BROTHERS BUILDING & CIVIL 2017

27) TRILIVA CONDO AT 111 TAMPINES ROAD RICH-LINK CONSTRUCTION PTE LTD 2017

28) TREASURE CREST EC AT ANCHORVALE CRESCENT SIM LIAN CONSTRUCTION CO (PTE) LTD 2017

29) WATERBAY AT UPPER SERANGOON VIEW XINYUAN CONSTRUCTION PTE LTD 2017

30) TUAS DORM. AT TUAS SOUTH ST 15 YONG SHENG DEVELOPMENT PTE LTD 2017

aung
Typewriter
Page 11 of 11