submittal data - amazon web services
TRANSCRIPT
Submittal Data
PROJECT:
REPRESENTATIVE:ENGINEER:CONTRACTOR:
UNIT TAG:TYPE OF SERVICE:SUBMITTED BY:APPROVED BY:ORDER NO.:
QUANTITY:
DATE:DATE:DATE:
Product photo could vary from the actual product
MAGNA1 32-100 F
Full range of intelligent, high-efficiency circulators for heating,cooling, ground source heat pump systems and domestic hotwater applications
Conditions of Service
Flow:Head:Efficiency:Liquid: WaterTemperature: 140 °FNPSH required: ftViscosity:Specific Gravity: 0.985
Pump Data
Maximum operating pressure: 174 psiLiquid temperature range: 14 .. 230 °FMaximum ambient temperature: 104 °FApprovals: 98544607Flange standard: GFPipe connection: GF15/26/40/43Product number: 98126823
Motor Data
P1 max: 8.62 .. 178 WRated voltage: 115-230 VMain frequency: 60 HzEnclosure class: X4DInsulation class: F
H[ft]
0
5
10
15
20
25
30
35
Q [US gpm]0 5 10 15 20 25 30 35 40
eta[%]
0
20
40
60
80
100
MAGNA1 32-100 F
P1[W]
0
50
100
150
1/14
Submittal Data
4.37"6.
22"
6.50
"6.
61"
2.72"
4.17" 4.17"
7.91"
5.79"2.13"
2.76"
2.28
"
0.45"
3.15
"2.
28"
1.81
"1.
26"
Materials:Pump housing: Cast iron
EN-GJL-250ASTM A48-250B
Impeller: PES 30%GF
2/14
Company name:Created by:Phone:
Date: 2/21/2018
Printed from Grundfos Product Center [2017.09.058]
Tender Text
Product photo could vary from the actual product
Product No.: 98126823MAGNA1 32-100 F
MAGNA1 circulator pump with easy selection of pump settingThe pump is of the canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only twogaskets for sealing.The bearings are lubricated by the pumped liquid.In order to avoid problems in connection with disposal, great importance has been attached to using as few differentmaterials as possible.A pump with no maintenance requirements and extremely low life cycle cost.
Heating systems• Main pump• mixing loops• heating surfaces• air-conditioning surfaces.The MAGNA1 circulator pumps are designed forcirculating liquids in heating systems with variable flows where it is desirable to optimize the setting of the pump dutypoint, thus reducing energy costs. The pumps are also suitable for domestic hot-water systems.To ensure correct operation, it is important that the sizing range of the system falls within the duty range of the pump.The pump is also suitable for systems withhot-water priority as an external signal canimmediately force the pump to operate according to the max. curve, for example in solar-heating systems.
Benefits• Safe selection.• Simple installation.• Low energy consumption. All MAGNA1 pumps comply with the EuP requirements.• Nine light fields for indication of pump setting. Three proportional-pressure curves, three constant-pressure curves andthree fixed-speed curves are available.• Low noise level.• No maintenance and long life.
Liquid:Pumped liquid: WaterLiquid temperature range: 14 .. 230 °FLiquid temperature during operation: 140 °FDensity: 61.35 lb/ft³
Technical:TF class: 110Approvals on nameplate: 98544607
Materials:Pump housing: Cast iron
EN-GJL-250
3/14
Company name:Created by:Phone:
Date: 2/21/2018
Printed from Grundfos Product Center [2017.09.058]
ASTM A48-250BImpeller: PES 30%GF
Installation:Range of ambient temperature: 32 .. 104 °FMaximum operating pressure: 174 psiFlange standard: GFPipe connection: GF15/26/40/43Pressure stage: PN12Port-to-port length: 6 1/2 in
Electrical data:Power input - P1: 8.62 .. 178 WMain frequency: 60 HzRated voltage: 1 x 115-230 VMaximum current consumption: 0.28 .. 1.61 AEnclosure class (IEC 34-5): X4DInsulation class (IEC 85): F
Others:Energy (EEI): 0.19Net weight: 11 lbGross weight: 13.2 lbShipping volume: 345 ft³
4/14
Company name:Created by:Phone:
Date: 2/21/2018
Printed from Grundfos Product Center [2017.09.058]
Position Count Description1 MAGNA1 32-100 F
Product photo could vary from the actual product
Product No.: 98126823
MAGNA1 circulator pump with easy selection of pump settingThe pump is of the canned-rotor type, i.e. pump and motor form an integral unit without shaft seal andwith only two gaskets for sealing.The bearings are lubricated by the pumped liquid.In order to avoid problems in connection with disposal, great importance has been attached to usingas few different materials as possible.A pump with no maintenance requirements and extremely low life cycle cost.
Heating systems• Main pump• mixing loops• heating surfaces• air-conditioning surfaces.The MAGNA1 circulator pumps are designed forcirculating liquids in heating systems with variable flows where it is desirable to optimize the setting ofthe pump duty point, thus reducing energy costs. The pumps are also suitable for domestic hot-watersystems.To ensure correct operation, it is important that the sizing range of the system falls within the dutyrange of the pump.The pump is also suitable for systems withhot-water priority as an external signal canimmediately force the pump to operate according to the max. curve, for example in solar-heatingsystems.
Benefits• Safe selection.• Simple installation.• Low energy consumption. All MAGNA1 pumps comply with the EuP requirements.• Nine light fields for indication of pump setting. Three proportional-pressure curves, threeconstant-pressure curves and three fixed-speed curves are available.• Low noise level.• No maintenance and long life.
Liquid:Pumped liquid: WaterLiquid temperature range: 14 .. 230 °FLiquid temperature during operation: 140 °FDensity: 61.35 lb/ft³
Technical:TF class: 110Approvals on nameplate: 98544607
Materials:Pump housing: Cast iron
5/14
Company name:Created by:Phone:
Date: 2/21/2018
Printed from Grundfos Product Center [2017.09.058]
Position Count DescriptionEN-GJL-250ASTM A48-250B
Impeller: PES 30%GF
Installation:Range of ambient temperature: 32 .. 104 °FMaximum operating pressure: 174 psiFlange standard: GFPipe connection: GF15/26/40/43Pressure stage: PN12Port-to-port length: 6 1/2 in
Electrical data:Power input - P1: 8.62 .. 178 WMain frequency: 60 HzRated voltage: 1 x 115-230 VMaximum current consumption: 0.28 .. 1.61 AEnclosure class (IEC 34-5): X4DInsulation class (IEC 85): F
Others:Energy (EEI): 0.19Net weight: 11 lbGross weight: 13.2 lbShipping volume: 345 ft³
6/14
Company name:Created by:Phone:
Date: 2/21/2018
Printed from Grundfos Product Center [2017.09.058]
98126823 MAGNA1 32-100 F 60 HzH[ft]
0
5
10
15
20
25
30
35
Q [US gpm]0 5 10 15 20 25 30 35 40
eta[%]
0
20
40
60
80
100
MAGNA1 32-100 F
P1[W]
0
20
40
60
80
100
120
140
160
180
7/14
Company name:Created by:Phone:
Date: 2/21/2018
Printed from Grundfos Product Center [2017.09.058]
H[ft]
0
5
10
15
20
25
30
35
Q [US gpm]0 5 10 15 20 25 30 35
eta[%]
0
20
40
60
80
100
MAGNA1 32-100 F
P1[W]
0
50
100
150
4.37"
6.22
"6.
50"
6.61
"
2.72"
4.17" 4.17"
7.91"
5.79"2.13"
2.76"
2.28
"
0.45"
3.15
"2.
28"
1.81
"1.
26"
L
N
Example of mains-connected motorwith mains switch, backup fuse and additional protection
L
N
RCD/RCCB
Description ValueGeneral information:Product name: MAGNA1 32-100 FProduct No.: 98126823EAN: 5710629499851
Technical:Head max: 32.81 ftTF class: 110Approvals on nameplate: 98544607Model: B
Materials:Pump housing: Cast iron
EN-GJL-250ASTM A48-250B
Impeller: PES 30%GF
Installation:Range of ambient temperature: 32 .. 104 °FMaximum operating pressure: 174 psiFlange standard: GFPipe connection: GF15/26/40/43Pressure stage: PN12Port-to-port length: 6 1/2 in
Liquid:Pumped liquid: WaterLiquid temperature range: 14 .. 230 °FLiquid temperature during operation: 140 °FDensity: 61.35 lb/ft³
Electrical data:Power input - P1: 8.62 .. 178 WMain frequency: 60 HzRated voltage: 1 x 115-230 VMaximum current consumption: 0.28 .. 1.61 AEnclosure class (IEC 34-5): X4DInsulation class (IEC 85): F
Others:Energy (EEI): 0.19Net weight: 11 lbGross weight: 13.2 lbShipping volume: 345 ft³
4.37"
2.72"4.17"4.17"
7.91"5.79"2.13"
2.76"
0.45"
8/14
Company name:Created by:Phone:
Date: 2/21/2018
Printed from Grundfos Product Center [2017.09.058]
98126823 MAGNA1 32-100 F 60 Hz
Note! All units are in [mm] unless otherwise stated.Disclaimer: This simplified dimensional drawing does not show all details.
4.37
"
6.22"6.50"6.61"
2.72
"
4.17
"4.
17"
7.91
" 5.79
"2.
13"
2.76
"
2.28"
0.45
"
3.15"2.28"1.81"1.26"
9/14
Company name:Created by:Phone:
Date: 2/21/2018
Printed from Grundfos Product Center [2017.09.058]
98126823 MAGNA1 32-100 F 60 Hz
All units are [mm] unless otherwise presented.
L N
Exam
ple
of m
ains
-con
nect
ed m
otor
with
mai
ns s
witc
h, b
acku
p fu
se a
nd a
dditi
onal
pro
tect
ion
L N
RC
D/R
CC
B
10/14
Company name:Created by:Phone:
Date: 2/21/2018
Printed from Grundfos Product Center [2017.09.058]
Order Data:
Product name: MAGNA1 32-100 FAmount: 1Product No.: 98126823
Total: Price on request
11/14
Company name:Created by:Phone:
Date: 2/21/2018
Printed from Grundfos Product Center [2017.09.058]
Exploded view ( TM055854 MAGNA1 200W)
164a
164
163a
163
302
301
301a
92
45
45b
6
450
21718
45
215a
215
45b
92
219a
219
18
215a
181
12/14
Company name:Created by:Phone:
Date: 2/21/2018
Printed from Grundfos Product Center [2017.09.058]
Sectional drawing ( TM069947 Magna1 small model C)
34
5
6
7
8
9
1
2
10
13/14
Company name:Created by:Phone:
Date: 2/21/2018
Printed from Grundfos Product Center [2017.09.058]
Parts list MAGNA1 32-100 F, Prod number 98126823Valid from 31.7.2017 (1731)
Position Description Annotation Classification data Part No. Count UnitGasket 2 pcsGasket 1 pcsWasher 2 pcsControl box 1 pcsPan head thread forming screw 2 pcs
6 Pump housing 1 pcs92 Clamp cpl. 1 pcs
- 301 Pump head cpl. 1 pcs301a O-ring 1450 Insulation 1 pcs
14/14