stylish thermostats for modern living - · pdf filestylish thermostats for modern living 03....
TRANSCRIPT
Stylish Thermostats For Modern Living
Domestic Heating Control Systems
Dial Type Thermostats
Mounting TypeSurface mounting: DS1/DS1-L and DS1-E/DS1-ELFlush mounting: DS-SB
Temperature Range05-35°C
Lock FacilityDS1-L / DS1-EL
Indication TypeLED: DS1/DS1-E/DS-SBLCD: DS1-L/DS1-EL
Set Back FacilityDS-SB
DimensionsDS1/DS1-L/DS1-E/DS1-EL 92x92x34mm (L,H,D)DS-SB 92x92x17mm (L,H,D)
E.U. Back BoxDS-SB
These thermostats are used in conjunction with a separate programmer.
Stylish Dial Type Thermostats
HeadlineInformation
ProductRanges
KeyFeatures
Flush Mount with Set Back Function - DS-SB1 Model, suitable for radiator and water
Set Back Function
Surface Mount with LCD Indication - DS1-L Series2 Models, suitable for water & electric heating systems.
LCD - Temperature Read-out
Dial Lock Facility
Power and Heating Indication
Surface Mount with LED Indication - DS1 Series2 Models, suitable for water & electric heating systems.
Surface Mount for Easy Installation
Temperature Range Limit
MAX
Standard dial thermostats are either on or o� according to thetime clock controlling the system.A set back thermostat is di�erent.It will follow the temperatureset on the dial during the timedperiod and will automaticallyreduce the set temperature by4°C when its timed to be o�.
The DS1 and DS1-L series are surface mounting for easy installation. Modern styling remains in keeping with the rest of the Heatmiser range.
The DS1-L series o�ers a dial lock, allowing you to reduce tampering of the heating system. A simple way of reducing your energy costs.
A slide switch on the side of the thermostat allows you to switch between On, Permanent O� or Time Clock. In On mode, the thermostat will maintain the set temperature on the dial, but will ignore the time clock input.
The DS1-L is equipped with an LCD. A turn of the dial will display the set temperature for 5 seconds before reverting back to the actual room temperature read-out.
On the DS-SB Public thermostat you can limit the temperature range. Adjustment is only possible by removing a screw making the DS-SB Public featuresideal for commercial applications. The DS-SB is shipped ready to work in On/O� but can be wired to work in SetBack Mode.
The DS1 series provides power and heating on indication in the form of coloured LEDs.
Dial Type Thermostats
Power and Heating Indication
Temperature Range Limit
MAX
The DS1 series provides power and heating on indication in the form of coloured LEDs.
On the DS-SB Public thermostat you can limit the temperature range. Adjustment is only possible by removing a screw making the DS-SB Public features ideal for commercial applications. The DS-SB is shipped ready to work in On/Off but can be wired to work in SetBack Mode.
02
Stylish Thermostats For Modern Living
AIR ONLY MODELS
DS1
05-35 °C
Surface
N
N
N
N
Y
N
N
N
N
Y
+/- 1.5°C
92x92x34mm
3A
230VAC
DS1-L
05-35 °C
Surface
N
Y
N
Y
Y
N
N
N
N
Y
+/- 1.5°C
92x92x34mm
3A
230VAC
DS-SB
05-35 °C
Flush
Y
N
Y
N
Y
Y
N
N
N
N
+/- 1.5°C
86x86x19mm
3A
230VAC
DS-SB Public
05-35 °C
Flush
Y
N
N
Y
Y
Y
N
N
N
N
+/- 1.5°C
86x86x19mm
3A
230VAC
FEATURES
Temperature Range
Mounting Type
Set Back Function
Digital Display
Time Clock Override Switch
Dial Lock
Built In Air Sensor
Remote Air Sensor
Floor Sensing Mode
Floor Probe Included
Built In Air & Floor
Accuracy
Range Limit (Screw required to adjust)
Dimensions
Max Switching Current
Supply
AIR & FLOOR MODELS
DS1-E
05-35 °C
Surface
N
N
N
N
Y
N
Y
Y
Y
Y
+/- 1.5°C
92x92x34mm
13A
230VAC
DS1-EL
05-35 °C
Surface
N
Y
N
Y
Y
N
Y
Y
Y
Y
N N N Y N N
+/- 1.5°C
92x92x34mm
13A
230VAC
150g 150g 150g 150gWeight 150g 150g
Flush Mount with Set Back Function
DS-SB
Surface Mount with LED Indication
DS1 Series
Surface Mount with LCD Indication
DS1-L Series
Public Thermostat with Range Limit
DS–SB Public
Stylish Thermostats For Modern Living
AIR ONLY MODELS
DS1
05-35 °C
Surface
N
N
N
N
Y
N
N
N
N
Y
+/- 1.5°C
92x92x34mm
3A
230VAC
DS1-L
05-35 °C
Surface
N
Y
N
Y
Y
N
N
N
N
Y
+/- 1.5°C
92x92x34mm
3A
230VAC
DS-SB
05-35 °C
Flush
Y
N
Y
N
Y
Y
N
N
N
N
+/- 1.5°C
92x92x17mm
3A
230VAC
DS-SB Public
05-35 °C
Flush
Y
N
N
Y
Y
Y
N
N
N
N
+/- 1.5°C
92x92x17mm
3A
230VAC
FEATURES
Temperature Range
Mounting Type
Set Back Function
Digital Display
Time Clock Override Switch
Dial Lock
Built In Air Sensor
Remote Air Sensor
Floor Sensing Mode
Floor Probe Included
Built In Air & Floor
Accuracy
Range Limit (Screw required to adjust)
Dimensions
Max Switching Current
Supply
AIR & FLOOR MODELS
DS1-E
05-35 °C
Surface
N
N
N
N
Y
N
Y
Y
Y
Y
+/- 1.5°C
92x92x34mm
13A
230VAC
DS1-EL
05-35 °C
Surface
N
Y
N
Y
Y
N
Y
Y
Y
Y
N N N Y N N
+/- 1.5°C
92x92x34mm
13A
230VAC
150g 150g 150g 150gWeight 150g 150g
Flush Mount with Set Back Function
DS-SB
Surface Mount with LED Indication
DS1 Series
Surface Mount with LCD Indication
DS1-L Series
Public Thermostat with Range Limit
DS–SB Public
Public Thermostatwith Range Limit
DS-SB / DS-SB Public
Surface Mountwith LCD Indication
DS1-L Series
Surface Mountwith LED Indication
DS1 Series
03Stylish Thermostats For Modern Living
230v Model Can be used to upgrade existing thermostats and can be used in conjunction with our UH4 and UH8 wiring centres.
12v Network Models Have been designed to work as part of a network system, and can be used in conjunction with our UH1 wiring centre and network products. *See pages 25 for system overview.
Electric Floor Model Supplied with a remote floor sensor, the Slimline-E offers the ability to measure room temperature, floor temperatureor both. The Slimline-E is rated at 16A making it ideal for electric floor heating.
Modern Slimline AppearanceThe slimline thermostat series
a depth of only 13mm after installation.
Temperature Hold FacilityAllows you to hold a set
duration - ideal for parties. After which, the thermostat will revert back to the programmed setting.
Holiday FunctionReduces the set temperature in your home for the duration of your holiday and returns to programmed settings to ensure your home is warm on your return.
Remote ControlAll models within our slimline series are compatible with our Infrared remote control.(Part Reference: RM1)
Temperature OverrideAllows you to adjust the desired temperature in your home without the need to fully re-program the thermostat.This new set temperature will be maintained until the next programmed setting.
Mounting TypeFlush mounting
Temperature Range05-35°C 41-95°F
Lock FacilityYes - All models
Indication TypeLCD with Blue Back Light
Optional ExtrasInfrared Remote Control
Dimensions98x85x16mm (L,H,D)(13mm Installed)
E.U. Back Box
HeadlineInformation
ProductRanges
KeyFeatures
Slimline ThermostatsThree ranges are available, including our Slimline 230v model, Slimline-E Electric Floor Heating model and our 12v Network Modelsideal for those looking to control their system centrally.
Our most popular product line
Energy Saving Optimum StartCalculates the amount of heat up time required to ensure your home is warm when you wake and return home. This is automatically optimised throughout the year to save you money.
230v Models Can be used to upgrade existing thermostats and can be used in conjunction with our UH2 and UH3 wiring centres.
12v Network Models Have been designed to work as part of a network system, and can be used in conjunction with our UH1 wiring centre and network products. *See pages 25 for system overview.
Electric Floor Model Supplied with a remote floor sensor, the Slimline-E offers the ability to measure room temperature, floor temperatureor both. The Slimline-E is rated at 16A making it ideal for electric floor heating.
Modern Slimline AppearanceThe slimline thermostat series
a depth of only 13mm after installation.
Temperature Hold FacilityAllows you to hold a set
duration - ideal for parties. After which, the thermostat will revert back to the programmed setting.
Holiday FunctionReduces the set temperature in your home for the duration of your holiday and returns to programmed settings to ensure your home is warm on your return.
Remote ControlAll models within our slimline series are compatible with our Infrared remote control.(Part Reference: RM1)
Temperature OverrideAllows you to adjust the desired temperature in your home without the need to fully re-program the thermostat.This new set temperature will be maintained until the next programmed setting.
Mounting TypeFlush mounting
Temperature Range05-35°C 41-95°F
Lock FacilityYes - All models
Indication TypeLCD with Blue Back Light
Optional ExtrasInfrared Remote Control
Dimensions98x85x16mm (L,H,D)(13mm Installed)
E.U. Back Box
HeadlineInformation
ProductRanges
KeyFeatures
Slimline ThermostatsThree ranges are available, including 230v Models for standard systems, 12v Network Models for those looking to control their system centrally and Electric Floor Models for those with Electric Floor Heating.
Our most popular product line
Energy Saving Optimum StartCalculates the amount of heat up time required to ensure your home is warm when you wake and return home. This is automatically optimised throughout the year to save you money.
Sensor HousingPart Ref: Heatmiser EN030This sensor housing is ideal for use in en-suites to house the remote sensor probe.
Remote Sensor ProbePart Ref: Heatmiser MISC103This remote sensor probe can be used to
probe is supplied with a 3 meter cable which can be extended to 20 meters if required.
Slimline Thermostats 04
230V
Slimline
05-35 °C41-95 °F
Y
Y
Y
4
Y
N
Y
Y
Y
Y
Y
Y
N
Y
Y
N
N
N
N
3A
+/-1 °C
Y
Y
230VAC
98x85x13mm(L,H,D)
195g
ELECTRIC FLOOR MODEL
Slimline-E
05-35 °C05-95 °F
Y
Y
Y
4
Y
N
N
Y
Y
Y
Y
Y
N
Y
Y
N
Y
Y
Y
16A
+/-1 °C
Y
Y
230VAC
98x85x13mm(L,H,D)
195g
Temperature Range
Blue Back Lit Screen
5/2 Day Programming Mode
7 Day Programming Mode
Number of Heating Levels
Optimum Start
Number of HW Times
Holiday Function
Keylock Function
Temperature Hold Function
Temperature Override
Temperature Override Limit
Frost Protection
Networking Facility
°C / °F Option
Remote Air Sensor Connection
Remote Air Sensor Included
Built In Air Sensor
Floor Sensing Mode
Floor Sensor Included
Max Switching Current
Accuracy
Infrared Remote Control Option
Adjustable Switching Di� erential
Supply
Installed Dimensions
Weight
FEATURES 12V
Slimline-N
05-35 °C41-95 °F
Y
Y
Y
4
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
N
3A
+/-1 °C
Y
Y
12VDC
195g
Slimline-HW-N
05-35 °C41-95 °F
Y
Y
Y
4
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
Y
N
N
3A
+/-1 °C
Y
Y
12VDC
195g
98x85x13mm(L,H,D)
Thimble SensorPart Ref: Heatmiser Thimble SensorThe Heatmiser Thimble sensor is ideal for discrete temperature monitoring and is compatible with all Heatmiser Thermostats with a remote sensor connection.
Remote Sensor ProbePart Ref: Heatmiser MISC103This remote sensor probe can be used to measure air and � oor temperature. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required.
05Stylish Thermostats For Modern Living
Touch Screen Thermostats
TouchScreen ThermostatsThe intuitive TouchScreen display makes searching for the user manual a thing of the past.
Making your life a little easier
230v ModelsCan be used to upgrade existing thermostats and can be used in conjunction with our UH4 and UH8wiring centres.
12v Network ModelsHave been designed to work as part of a network system, and can be used in conjunction with our UH1 wiring centre and network products. See page 24 and 25 for our system overview.
Air / Floor ModelsAre supplied with a remote � oor sensor and provide the ability to measure room temperature, � oor temperature or both. The Touch-E o� er 16A switching making them ideal for electric � oor heating.
5/2 & 7 Day Programming5/2 Day mode is ideal for those who keep to one schedule Monday - Friday and another for the weekend. 7 Day mode allows you to have a di� erent schedule for each day of the week. Ideal for families with changing schedules.
Frost ProtectionA function designed to protect your home against frost. An adjustable frost temperature level can be programmed, between 7°C - 17°C, ensuring your home is always protected against the elements whilst you are away.
Two Zone ModelsThe Touch-Duo is ideal for bedrooms with ensuite. Zone one uses the built in air sensor whilst zone two uses the remote thimble sensor provided.
Adjustable Switching Di� erentialOur TouchScreen Series has an adjustable switching di� erential from 0.5°C - 3°C. This function allows you to get even tighter control of your heating system.
Keylock FunctionLocking the thermostat keypad is an easy way to save energy. Allowing access to only those that require it.
Networking FacilityControl your heating from anywhere. Our 12v network thermostats o� er you the ability to control your heating centrally, with the use of ourTouchPad. Take a look at pages 24-25 for more details on our network products.
Mounting TypeFlush mounting
Temperature Range05-35°C 41-95°F
Lock FacilityYes - All models
Indication TypeLCD with Blue Back Light
Adjustable SwitchingDi� erential0.5-3°C
Dimensions110x100x17mm (L,H,D)
E.U. Back Box
HeadlineInformation
ProductRanges
KeyFeatures
06
Stylish Thermostats For Modern LivingStylish Thermostats For Modern Living
A function designed to protect
7°C - 17°C, ensuring your home is always protected against the elements whilst you are away.
White Silver
Available In Three Plastic Colour Finishes
Black
230V MODELS 12V NETWORK MODELS
Blue Back Lit Screen
5/2 Day Programming Mode
7 Day Programming Mode
Number of Heating Levels
Optimum Start
Number of HW Times
Holiday Function
Keylock Function
Temperature Hold Function
Temperature Override
Temperature Override Limit
Frost Protection
Networking Facility
°C / °F Option
Built In Air Sensor
Remote Air Sensor
Remote Air Sensor Included
Floor Sensing Mode
Floor Sensor Included
Max Switching Current
Accuracy
Supply
DT-TS | DT-RPTS
Y
N
N
1
N
0
N
Y
N
Y
Y
Y
N
Y
Y
N | Y
N | Y
N
N
3A
+/-1°C
0.5 - 3°C
230VAC
PRT-TS | PRT-RPTS
Y
Y
Y
4
Y
0
Y
Y
Y
Y
Y
Y
N
Y
Y
N | Y
N
N
N
3A
+/-1°C
0.5 - 3°C
230VAC
PRT/HW-TS
Y
Y
Y
4
Y
4
Y
Y
Y
Y
Y
Y
N
Y
Y
N
N
N
N
3A
+/-1°C
0.5 - 3°C
230VAC
DT-NTS
Y
N
N
1
N
0
N
Y
N
Y
Y
Y
Y
Y
Y
N
N
N
N
3A
+/-1°C
0.5 - 3°C
12VDC
PRT-NTS
Y
Y
Y
4
Y
0
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
3A
+/-1°C
0.5 - 3°C
12VDC
PRT/HW-NTS
Y
Y
Y
4
Y
4
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
3A
+/-1°C
0.5 - 3°C
12VDC
PRT-ENTS
Y
Y
Y
4
Y
0
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
3A
+/-1°C
0.5 - 3°C
12VDC
ELECTRIC FLOOR MODEL
DT-ETS
Y
N
N
1
N
0
N
Y
N
Y
Y
Y
N
Y
Y
Y
N
Y
Y
16A
+/-1°C
0.5 - 3°C
230VAC
FEATURES
PRT-ETS
Y
Y
Y
4
Y
0
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
N
Y
Y
16A
+/-1°C
0.5 - 3°C
230VAC
Sensor HousingPart Ref: Heatmiser EN030This sensor housing is ideal for use in en-suites to house the remote sensor probe.
Remote Sensor ProbePart Ref: Heatmiser MISC103
temperature. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required.
Sensor HousingPart Ref: Heatmiser EN030This sensor housing is ideal for use in en-suites to house the remote sensor probe.
Remote Sensor ProbePart Ref: Heatmiser MISC103
temperature. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required.
12V
Touch-N
Y
Y
Y
4
Y
0
1
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
Y
N
3A
+/-1°C
0.5 - 3°C
12VDC
Touch-HWN
Y
Y
Y
4
Y
4
1
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
3A
+/-1°C
0.5 - 3°C
12VDC
230V
Touch
Y
Y
Y
4
Y
0
1
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
N
N
N
N
3A
+/-1°C
0.5 - 3°C
230VAC
Touch-Duo
Y
Y
Y
4
Y
0
2
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
N
Y
N
N
3A
+/-1°C
0.5 - 3°C
230VAC
FEATURES
Blue Back Lit Screen
5/2 Day Programming Mode
7 Day Programming Mode
Number of Heating Levels
Optimum Start
Number of HW Times
Number of Zones
Holiday Function
Keylock Function
Temperature Hold Function
Temperature Override
Temperature Override Limit
Frost Protection
Networking Facility
°C / °F Option
Built In Air Sensor
Remote Air Sensor Connection
Remote Air Sensor Included
Thimble Air Sensor Included
Floor Sensing Mode
Floor Sensor Included
Max Switching Current
Accuracy
Adjustable Switching Di� erential
Supply
ELECTRIC FLOOR MODEL
Touch-E
Y
Y
Y
4
Y
0
1
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
N
N
Y
Y
16A
+/-1°C
0.5 - 3°C
230VAC
Thimble SensorPart Ref: Heatmiser Thimble SensorThe Heatmiser Thimble sensor is ideal for discrete temperature monitoring and is compatible with all Heatmiser Thermostats with a remote sensor connection.
Remote Sensor ProbePart Ref: Heatmiser MISC103This remote sensor probe can be used to measure air and � oor temperature. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required.
07Stylish Thermostats For Modern Living
Battery Thermostat SeriesOur battery thermostats are a viable upgrade route for those with a dial thefor those with a dial thef rmostat working on a 2 wire system. The design follfollf ows our slimline thermostat series with Non-programmable and Programmable models being available.
BATTERY THERMOSTATS
5/2 Day Programming Mode
7 Day Programming Mode
Number of Heating Levels
Optimum Start
Holiday Function
Keylock Function
TempeTempeT rature Hold Function
TempeTempeT rature Override Limit
Frost Protection
°C / °F Option
Built In Air Sensor
Accuracy
Supply
DT-BT-BT
N
1
N
N
Y
N
Y
Y
Y
Y
+/-1°C
Y
2 x AAA
PRT-BT-BT
Y
4
Y
Y
Y
Y
Y
Y
Y
Y
+/-1°C
Y
2 x AAA
FEATURES
N Y
HeadlineInfofof rmationMounting TyTyT peBattery Thermostats: Surface mounting
Time Clocks: Flush mounting
Battery Thermostat TemTemT perature Range05-35°C
Lock FacilityYes - Yes - Y All models
Indication TyTyT peLCD with Blue Back Light
DimensionsBattery Thermostats: 86x99x24mm (L,H,D)Slimline Time Clocks: 98x85x16mm (L,H,D)TouchTouchT Screen Time Clocks: 92x92x17mm (L,H,D)
E.U. Back BoxTime Clock Only
Battery Thermostats
Battery poweredPowered from 2 x AAA Batteries – suitable for for f2 wire heating systems.
Surface mountOur battery thermostats are surface mounted for easy installfor easy installf ation, making them perfefef ct for the for the f
Optimum StartA fefef ature whereby the thermostat calculates the amount of heat up time required, is standard on the Programmable model (PRT-B).T-B).T
Key Lock FunctionOur battery thermostats are equipped with a key lock helping to prevent energy usage by restricting access.
KeKeK yFeatures
Slimline design to compliment any environment
Battery ThermostatPart Ref: Heatmiser f: Heatmiser f PRT-BT-BT
Battery Thermostat Series Our battery thermostats are a viable upgrade route for those with a dial thermostat working on a 2 wire system. The design follows our slimline thermostat series with Non-programmable and Programmable models being available.
BATTERY THERMOSTATS
5/2 Day Programming Mode
7 Day Programming Mode
Number of Heating Levels
Optimum Start
Holiday Function
Keylock Function
Temperature Hold Function
Temperature Override Limit
Frost Protection
°C / °F Option
Built In Air Sensor
Accuracy
Supply
DT-B
N
N
1
N
N
Y
N
Y
Y
Y
Y
+/-1°C
Y
2 x AAA
PRT-B
Y
Y
4
Y
Y
Y
Y
Y
Y
Y
Y
+/-1°C
Y
2 x AAA
FEATURES
HeadlineInformationMounting TypeBattery Thermostats: Surface mounting
Time Clocks: Flush mounting
Battery Thermostat Temperature Range05-35°C
Lock FacilityYes - All models
Indication TypeLCD with Blue Back Light
DimensionsBattery Thermostats: 86x99x24mm (L,H,D)Slimline Time Clocks: 98x85x16mm (L,H,D)TouchScreen Time Clocks: 92x92x17mm (L,H,D)
E.U. Back BoxTime Clock Only
Battery Thermostats & Time Clocks
Battery poweredPowered from 2 x AAA Batteries – suitable for 2 wire heating systems.
Surface mountOur battery thermostats are surface mounted for easy installation, making them perfect for the
Optimum StartA feature whereby the thermostat calculates the amount of heat up time required, is standard on the Programmable model (PRT-B).
Key Lock FunctionOur battery thermostats are equipped with a key lock helping to prevent energy usage by restricting access.
KeyFeatures
Slimline design to compliment any environment
Battery ThermostatPart Ref: Heatmiser PRT-B
Battery Thermostats & Time Clocks 08
Time ClocksSimple to use Single and 4 Channel Time Clocks
Slimline Time ClockPart Ref: Heatmiser TM1
230v Models Are designed to work with our UH8 wiring centre and dial thermostat with set back function, providing
12v Network Models Have been designed to work as part of a network system, and can be used in conjunction with our UH1 wiring centre and network products.
Number of ZonesA single zone can be controlled on the TM1 series and 4 zones can be controlled on the TM4 series.
A mode select button providing an easy method of switching between permanent on, permanent
mode) TM4 only.
+ Boost FacilityThis programmable function allows you to extend the program time, in 30 minute increments - ideal for unscheduled operation of the system.
Number of Switching Times
provided on all time clock models, allowing
heating system.
Countdown TimerA simple yet useful function that enables the output for the duration of the programmed countdown time.
From Towel Rails to LightingAll time clock models can be used to control anything - not just your heating system. In fact, those using our networking system can control each time clock independently from the TouchPad or over the internet, so it makes sense to use one of our time clocks wherever you want complete control.
ProductRanges
KeyFeatures
TIME CLOCKS230V MODELS
Blue Back Lit Screen
Keypad/TouchScreen
Number of Zones
5/2 Day Programming Mode
7 Day Programming Mode
Number of Switching Times
+ Boost Facility
Copy Facility
Countdown Timer Function
Holiday Function
Keylock Function
Manual Override
Networking Facility
Max Switching Current
Changeover Output Option
Supply
TM1
Keypad
Y
1
Y
Y
4
N
N
N
Y
Y
Y
Y
N
3A
Y
230VAC
TM4-TS
TouchScreen
Y
4
Y
Y
4
Y
Y
Y
N
Y
Y
Y
N
3A
N
230VAC
TM1-N
Keypad
Y
1
Y
Y
4
N
N
N
Y
Y
Y
Y
Y
3A
N
12VDC
FEATURES
KeypadKeypad TouchTouchT ScreenBlue Back Lit Screen
TIME CLOCKS12V NETWORK MODELS
TouchScreen TimeClock Part Ref: Heatmiser TM4
09Stylish Thermostats For Modern Living
neoAir
Wireless Thermostatsalternative, and are the ideal choice for extensions or when you are looking to relocate your thermostat.
Wireless design for easy installation
Mounting TypeSlimline-RF:WallTouch-RF/neoAir:Wall/Desk
Temperature Range05-35°C 41-95°F
Lock FacilityYes - All models
Indication TypeLCD with Back Light
HeadlineInformation
KeyFeaturesRelocateMany thermostats are sited incorrectly, causing your boiler to come on more than necessary. A wireless thermostat allows you to move your thermostat to a more suitable position, without the need to run additional cables. What’s more, our TouchScreen models have a desk stand, enabling you to move the thermostat around the house with you.
Key Lock FunctionA simple way to reduce tampering of the system settings, and standard across our wireless thermostat series.
App ControlUp to 32 neoAir or amixture of neoAir andneoStat can be paired toa neoHub to o�er localand remote control of themulti zone heating system.neoAir are perfect forextensions or areas wherea wired thermostat isn’tpossible.
Fail SafeA loss of wireless connection could leave your home vulnerable to frost damage. The fail safe function enables the heating for 20% of the time, ensuring the temperature in your home does not drop to dangerous levels.
Electric Floor Model
models are capable of switching up to 16A and
Touch RFSlimline RF Touch RF
Replaceable BatteriesThe Slimline RF and neoAir use standard AAA batteries.
TouchScreen Thermostats: 110x100x21mm (L,H,D)Battery Thermostats: 86x99x24mm (L,H,D)
DimensionsneoAir: 86x86x26mm (L,H,D)
Wireless Thermostats
Compatible ReceiversOur Wireless thermostats are compatible with our 2 channel RF-Switch and 8 zone UH8-RF wireless receivers.
10
Slimline Wireless Thermostat Series
Easily Change Batteries
AIR ONLY MODELS AIR ONLY MODELS
COMPATIBLE RECEIVERS
RC1-W Compatible
RC2-W Compatible
RC1-WTS Compatible
RC2-WTS Compatible
UH1-W Compatible
5/2 Day Programming Mode
7 Day Programming Mode
Number of Heating Levels
Optimum Start
Number of HW Times
Holiday Function
Keylock Function
Temperature Hold
Temperature Override
Frost Protection
°C / °F Option
Built in Air Sensor
Remote Air Sensor Connection
Remote Air Sensor Included
Floor Sensing Mode
Floor Sensor Included
Accuracy
Wireless Fail Safe Function
RF Frequency
Operational Radio Range
(Open Space)
Power
USB Power Lead Included
Mounting Type
Dimensions
DT-W
Y
N
N
N
Y
05-35 °C
41-95 °F
N
N
1
N
0
N
Y
N
Y
Y
Y
Y
N
N
N
N
+/-1°C
Y
Y
868MHz
Up to
100M
2 x AAA
Typically
1 Year
N
Wall
PRT-W
Y
N
N
N
Y
05-35 °C
41-95 °F
Y
Y
4
Y
0
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
+/-1°C
Y
Y
868MHz
Up to
100M
2 x AAA
Typically
1 Year
N
Wall
PRTHW-W
Y
N
N
N
Y
05-35 °C
41-95 °F
Y
Y
4
Y
4
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
+/-1°C
Y
Y
868MHz
Up to
100M
2 x AAA
Typically
1 Year
N
Wall
DT-WTS
N
N
Y
N
N
DT-UWTS
N
N
N
N
Y
PRT-WTS
N
N
Y
N
N
DT-EWTS
N
N
N
Y
N
05-35 °C
41-95 °F
N
N
1
N
0
N
Y
N
Y
Y
Y
Y
N
N
Y
N
+/-1°C
Y
Y
PRT-UWTS
N
N
N
N
Y
PRT-EWTS
N
N
N
Y
N
05-35 °C
41-95 °F
Y
Y
4
Y
0
Y
Y
Y
Y
Y
Y
Y
N
N
Y
N
+/-1°C
Y
Y
ELECTRIC FLOOR
MODELS
ELECTRIC FLOOR
MODELS
DT-EW
N
Y
N
N
N
05-35 °C
41-95 °F
N
N
1
N
0
N
Y
N
Y
Y
Y
Y
Y
N
Y
N
+/-1°C
Y
Y
868MHz
Up to
100M
2 x AAA
Typically
1 Year
N
Wall
FEATURES
PRT-EW
N
Y
N
N
N
05-35 °C
41-95 °F
Y
Y
4
Y
0
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
N
+/-1°C
Y
Y
868MHz
Up to
100M
2 x AAA
Typically
1 Year
N
Wall
PRTHW-WTS
N
N
Y
N
N
PRTHW-UWTS
N
N
N
N
Y
05-35 °C
41-95 °F
N
N
1
N
0
N
Y
N
Y
Y
Y
Y
N
N
N
N
+/-1°C
Y
Y
433MHz | 868MHz
Up to
100M
Typically
6-8 Months
Y
Wall/Desk Stand
05-35 °C
41-95 °F
Y
Y
4
Y
0
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
+/-1°C
Y
Y
433MHz | 868MHz
Up to
100M
Typically
6-8 Months
Y
Wall/Desk Stand
433MHz
Up to
100M
Typically
6-8 Months
Y
Wall/Desk Stand
05-35 °C
41-95 °F
Y
Y
4
Y
4
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
+/-1°C
Y
Y
433MHz | 868MHz
Up to
100M
Typically
6-8 Months
Y
Wall/Desk Stand
85mm(L) x 98mm(H) x 24mm(D) 110mm(L) x 100mm(H) x 20mm(D)
Rechargable Battery (Mini USB Connection)
SLIMLINE WIRELESS SERIES TOUCHSCREEN WIRELESS SERIES
Temperature Range
Battery Lifetime
Slimline Wireless Thermostat Series
Easily Change Batteries
AIR ONLY MODELS AIR ONLY MODELS
COMPATIBLE RECEIVERS
RC1-W Compatible
RC2-W Compatible
RC1-WTS Compatible
RC2-WTS Compatible
UH1-W Compatible
5/2 Day Programming Mode
7 Day Programming Mode
Number of Heating Levels
Optimum Start
Number of HW Times
Holiday Function
Keylock Function
Temperature Hold
Temperature Override
Frost Protection
°C / °F Option
Built in Air Sensor
Remote Air Sensor Connection
Remote Air Sensor Included
Floor Sensing Mode
Floor Sensor Included
Accuracy
Wireless Fail Safe Function
RF Frequency
Operational Radio Range
(Open Space)
Power
USB Power Lead Included
Mounting Type
Dimensions
DT-W
Y
N
N
N
Y
05-35 °C
41-95 °F
N
N
1
N
0
N
Y
N
Y
Y
Y
Y
N
N
N
N
+/-1°C
Y
Y
868MHz
Up to
100M
2 x AAA
Typically
1 Year
N
Wall
PRT-W
Y
N
N
N
Y
05-35 °C
41-95 °F
Y
Y
4
Y
0
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
+/-1°C
Y
Y
868MHz
Up to
100M
2 x AAA
Typically
1 Year
N
Wall
PRTHW-W
Y
N
N
N
Y
05-35 °C
41-95 °F
Y
Y
4
Y
4
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
+/-1°C
Y
Y
868MHz
Up to
100M
2 x AAA
Typically
1 Year
N
Wall
DT-WTS
N
N
Y
N
N
DT-UWTS
N
N
N
N
Y
PRT-WTS
N
N
Y
N
N
DT-EWTS
N
N
N
Y
N
05-35 °C
41-95 °F
N
N
1
N
0
N
Y
N
Y
Y
Y
Y
N
N
Y
N
+/-1°C
Y
Y
PRT-UWTS
N
N
N
N
Y
PRT-EWTS
N
N
N
Y
N
05-35 °C
41-95 °F
Y
Y
4
Y
0
Y
Y
Y
Y
Y
Y
Y
N
N
Y
N
+/-1°C
Y
Y
ELECTRIC FLOOR
MODELS
ELECTRIC FLOOR
MODELS
DT-EW
N
Y
N
N
N
05-35 °C
41-95 °F
N
N
1
N
0
N
Y
N
Y
Y
Y
Y
Y
N
Y
N
+/-1°C
Y
Y
868MHz
Up to
100M
2 x AAA
Typically
1 Year
N
Wall
FEATURES
PRT-EW
N
Y
N
N
N
05-35 °C
41-95 °F
Y
Y
4
Y
0
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
N
+/-1°C
Y
Y
868MHz
Up to
100M
2 x AAA
Typically
1 Year
N
Wall
PRTHW-WTS
N
N
Y
N
N
PRTHW-UWTS
N
N
N
N
Y
05-35 °C
41-95 °F
N
N
1
N
0
N
Y
N
Y
Y
Y
Y
N
N
N
N
+/-1°C
Y
Y
433MHz | 868MHz
Up to
100M
Typically
6-8 Months
Y
Wall/Desk Stand
05-35 °C
41-95 °F
Y
Y
4
Y
0
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
+/-1°C
Y
Y
433MHz | 868MHz
Up to
100M
Typically
6-8 Months
Y
Wall/Desk Stand
433MHz
Up to
100M
Typically
6-8 Months
Y
Wall/Desk Stand
05-35 °C
41-95 °F
Y
Y
4
Y
4
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
+/-1°C
Y
Y
433MHz | 868MHz
Up to
100M
Typically
6-8 Months
Y
Wall/Desk Stand
85mm(L) x 98mm(H) x 24mm(D) 110mm(L) x 100mm(H) x 20mm(D)
Rechargable Battery (Mini USB Connection)
SLIMLINE WIRELESS SERIES TOUCHSCREEN WIRELESS SERIES
Temperature Range
Battery Lifetime
FEATURES
Compatible Receivers
RF Switch
UH8-RF
App Control
Operating Type
Temperature Range
Heating Only Mode (Selectable by User)
Timer Only Mode
Heating & Hot Water Mode (Selectable by User)
Non Programmable Mode
5/2 Day Programming Mode
7 Day Programming Mode
Number of Heating Levels
Optimum Start
Number of HW Times
Holiday Function
Keylock Function
Temperature Hold
Temperature Override
Frost Protection
C/F Function
Built in Air Sensor
Remote Air Sensor Connection
Accuracy
Adjustable Switching Di� erential
Wireless Fail Safe Function
RF Frequency
RF Range (UH8-RF/RF Switch)
App Data Range
Power
Battery Lifetime
USB Power Lead Included
Mounting Type
Dimensions
Slimline-RF
Y
Y
N
Button
05-35 °C - 41-95 °F
Y
N
Y
Y
Y
Y
4
Y
4
Y
Y
Y
Y
Y
Y
Y
Y
1 °C
Y
Y
868MhZ
Up to 100M
N/A
2 X AAA
1 Year
N
Wall
85mm(L) x 98mm (H) x 24mm
neoAir
Y
Y
Y
Touch Key
05-35 °C - 41-95 °F
Y
Y
Y
Y
Y
Y
4
Y
4
Y
Y
Y
Y
Y
Y
Y
Y
1 °C
Y
Y
868MhZ
Up to 100M
Up to 30M
4 X AAA
1 Year
N
Wall/Stand
86mm(L) x 86mm (H) x 26mm
Touch-RF
Y
Y
N
Touchscreen
05-35 °C - 41-95 °F
Y
N
Y
Y
Y
Y
4
Y
4
Y
Y
Y
Y
Y
Y
Y
N
1 °C
Y
Y
868MhZ
Up to 100M
N/A
Rechargeable Battery
1 Year
Y
Wall/Desk
110mm(L) 100mm (H) x 20mm (D)
11Stylish Thermostats For Modern Living
Wireless Receiver for Twin Heating ZonesPart Ref: Heatmiser RC1-W
capable of controlling two heating zones, using our DT-W/PRT-W or one heating and one hot water zone, using our PRTHW-W.
Wireless Receiversas well as conventional radiator systems.
Mounting TypeSlimline & TouchScreen Receivers:Flush MountingUH1-W Wiring Centre:Wall Mount
Indication TypeLED
DimensionsSlimline & TouchScreen Receivers: 86x86x16mm (L,H,D)Wiring Centre Receiver: 290x200x70mm (L,H,D)
CompatabilityWireless Slimline ThermostatsDT-W, PRT-W, PRT-EW, PRTHW-WWireless TouchScreen ThermostatsDT-UWTS, PRT-UWTS, PRTHW-WUTS
Wireless ReceiversUH1-W, RC1-W, RC2-W
E.U. Back Box
HeadlineInformation
Part Ref: Heatmiser RC2-W
with our DT-EW or PRT-EW thermostat and is supplied with a 3 meter
Slimline Thermostat Wireless Receivers
TouchScreen Thermostat Wireless Receivers
Wireless Receiver for Twin Heating ZonesPart Ref: Heatmiser RC1-WTS
TouchScreen wireless thermostats. Two heating zones can be controlled using our DT-WTS/PRT-WTS or alternatively, one heating and one hot water zone can be controlled from this receiver using our PRTHW-WTS.
Slimline Wireless RepeaterPart Ref: WR1The WR1 is our 230v powered wireless repeater, designed to extend the communication distance between the thermostat and receiver.
Wireless Receivers
The Heatmiser RF Switch is our surface mount 2 channel RF Receiver compatible with the Slimline-RF, Touch-RF and neoAir Thermostats.
A single Slimline-RF, Touch-RF or neoAir in Heating Only mode or a single Slimline-RF, Touch-RF or neoAir in Heating/Hot Water mode can be paired to the RF Switch.
In addition to the two changeover contacts for the heating and hot water circuits, the RF Switch provides a volt free switch for the boiler.
The RF Switch can be paired to multiple UH8-RF, providing a wireless link for the boiler signal.
Wireless Receivers
Mounting TypeRF Switch / BoostUH8-RFSurface Mounting
Indication TypeLED
DimensionsRF Switch / Boost108x90x24mm (L,H,D)UH8-RF:384x148x60mm (L,H,D)
CompatibilityButton Wireless ThermostatPart Ref: Slimline-RF Touchscreen Wireless ThermostatPart Ref: Touch-RF
App Wireless ThermostatPart Ref: neoAir
HeadlineInformation
Our wireless receivers are designed to work with our wireless thermostats and are ideally suited for water underfloor heating and conventional heating systems.
Heatmiser RF Switch
8 Zone Wiring CentrePart Ref: Heatmiser UH8-RF
Touchscreen Wireless Thermostat
The Heatmiser Boost is our surface mount 230v powered wireless repeater for the RF and Neo systems designed to extend the communication distance between the thermostat and receiver.
Heatmiser Boost
12
Wireless 230v 8 Zone Wiring CentrePart Ref: Heatmiser UH8-RF
The UH8-RF is designed to be used in conjunction with our Slimline-RF/Touch-RF and neoAir
Wireless Thermostats.
The UH8-RF provides central switching and is therefore ideally situated next to the underfl oor
heating manifold. Eight zones can be controlled as well as providing an output for a hot water
cylinder. On demand from any zone, a 230v output is provided to switch the relevant zone actuators,
underfl oor heating pump and valve. A volt free connection is supplied for the boiler making it
compatible with almost all types of boilers. The RF Switch can also be paired to multiple UH8-RF
providing a wireless link for the boiler enable signal.
Up to 6 actuators can be connected to each zone. An external aerial is available for use when the
UH8-RF is being mounted in a metal cupboard or when the wireless signal is restricted.
A software option in the thermostat allows you to confi gure which zones are underfl oor heating
and which zones are radiators. Radiator zones will not enable the underfl oor heating pump and
underfl oor heating valve when there is a call for heat.
Wireless Wiring Centre
FEATURES RF-Switch UH8-RF
Mounting Type
Compatible with
Number of Channel
Fail Safe
Power
Rating
Optional Extendable Aerial
Operating Frequency
Range(Open Space)
Pump Output
Zone, HW & Pump Output Test Mode
Boiler Enable
HW Cylinder Thermostat Connection
Per Zone UFH / Radiator Selection
Surface
Slimline-RF/Touch-RF/neoAir
2
Y
230V AC
3A
N
868MHz
100M
N
N
Y
N
N
Surface
Slimline-RF/Touch-RF/neoAir
8
Y
230V AC
3A
Y
868Mhz
100M
Y
Y
Y
Y
Y
13Stylish Thermostats For Modern Living
Heat or Timer OptionThe SmartStat can be setup to work in either Heat or Timer mode, so is perfect for controlling heating zones or timer zones such as towel rails and hot water.
Mounting TypeFlush mounting
Temperature Range05-35°C 41-95°F
Indication Type2.8” Full Colour LCD
Dimensions95x95x45mm(15mm installed)
E.U. Back Box
HeadlineInformation
KeyFeatures
WiFi Smart ThermostatSmartStat is our all-new WiFi Connected Thermostat with full colour LCD.Now is the time to take control of your multi zone heating and hot water system from anywhere. What’s more, our Geo Location feature ensures you never heat an empty home.
Control from your SmartPhoneSmartStat has built in WiFi so connects directly to your Home Router. As SmartStat connects to your SmartPhone via our cloud server setup is a dream and will take minutes – no technical setup here. SmartStat is compatible with iPhone & iPad and with Android SmartPhones & Tablets.
Auto Dimming The SmartStat Display can be programmed to automatically dim in low light – making SmartStat perfect for bedrooms.
Frost ProtectionDon’t worry we have your home covered. The in built frost protection feature will protect your home against the elements.
Thermostat and Programmer in OneGone are the days of having a separate programmer and thermostat. SmartStat is both in one so you no longer have to � ddle with the awkwardly positioned thermostat.
Comfort ProgrammingNow is the time to re-think how you heat your home.SmartStat lets you have di� erent temperatures at di� erent times of the day, not only an energy saving feature but one that creates for a more comfortable living environment too. The Self Learning Optimum Start feature will automatically calculate when your heating should be on, so it’s one less thing for you to worry about.
Geo LocationGeo Location uses the mobile phone masts, nearby WiFi and your GPS to calculate your position. When you setup Geo Location on the SmartStat App, you set a leaving and returning trigger. When you pass these triggers, SmartStat will adjust the temperature in your home automatically.
SmartStat
Multi-Zone Up to 32 SmartStats can be controlled within one location without the need for any network hub. Global features such as Temperature Hold, Key Lock and Home/Away are all available on the SmartStat App.
Multi User Multiple users can login to the SmartStat App and take control of the heating & hotwater from anywere. In addition, Geo Location can be configured on each persons device meaning the heating is turned off when the last person has left home and back on when the first person returns.
14
Remote Sensor ProbePart Ref: Heatmiser MISC103This remote sensor probe can be used to measure air and � oor temperature. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required.
SMARTSTAT
Temperature Range
Blue Back Lit Screen
Non-Programmable Mode
5/2 Day Programming Mode
7 Day Programming Mode
24 Hour Programming Mode
Number of Heating Levels
Optimum Start
Number of HW Times
Holiday Function
Temperature Hold Function
Temperature Override
Temperature Override Limit Frost
Protection
App Control
°C / °F Option
Remote Air Sensor Connection
Built In Air Sensor
Floor Sensing Mode
Floor Sensor Included
Max Switching Current
Accuracy
Adjustable Switching Differential
Supply
Output
Installed Dimensions
Weight
05-35 °C41-95 °F
Y
Y
Y
Y
Y
4
Y
0
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
3A
+/- 1°C
+/- 1-3°C
230VAC
Volt Free Contact
128g
05-35 °C41-95 °F
Temperature Range
Non-Programmable Mode
7 Day Programming Mode
Number of Heating Levels
Number of HW Times
Temperature Hold Function
Temperature Override Limit Frost
App Control
Floor Sensing Mode
Max Switching Current
Adjustable Switching Differential
Output
Weight
Remote Air Sensor Connection
Y
Y
4
0
Y
Y
Y
Y
3A
+/- 1-3°C
Volt Free Contact
128g
Y
FEATURES Available in 3 Colours
95x95x15mm (L,H,D)
Thimble SensorPart Ref: Heatmiser Thimble SensorThe Heatmiser Thimble sensor is ideal for discrete temperature monitoring and is compatible with all Heatmiser Thermostats with a remote sensor connection.
Sapphire Black Glacier White
Platinum Silver
15Stylish Thermostats For Modern Living
neoStat
Connectivity Standard Mesh Network Topology (neoStat)Point to Point (neoAir)
Lock FacilityYes - All models
SmartPhone App iPhone / iPad Android Tablet & Phone Kindle DevicesWindows Phone Supported
HeadlineInformation
KeyFeatures
Local Control (In case of loss of Broadband Connection) Should the internet connection fail, the heating system can still be operated within the home by using the thermostat keypad. As soon as the internet connection is restored, your neoHub will automatically logon to the Cloud Server re-enabling app control.
API - Third Party Integration Our published API (JSON) makes it easy for third party integration companies to integrate our Neo Network System with leading home automation brands products from companies such as Control4 and Crestron.
APIMulti-Locations During the installation of the app, you are prompted to create an account on the Heatmiser Cloud Server after which multiple locations can be created. Logging into to your account from another device will present all of your Locations for quick and easy access.
Multi-Zone The Heatmiser Neo Network system has been built from the ground up with multi-zone homes in mind. The neoHub coordinates the data between each Neo thermostat on the network.
Plug and PlayThe neoHub connects directly to a spare port on your router, obtaining an IP Address and joining itself to your home network. It has been designed to be simple to install and setup, and is compatible with broadband connectionswith Dynamic IP Addresses. The neoHub connects to our Cloud Server eliminating any complex setup requirements including port forwarding.
The Neo system has been designed to offer complete local and App control of your heating, hot water and plug-in appliances. With Neo you can control your heating from anywhere using your SmartPhone or Tablet. The neoAir offers a totally wire free alternative to the neoStat and is perfect for extensions or additional zones.
Multi Zone App Control
16
Features
Thermostat Mode
Timer Mode
Temperature Range
Display
Back Lit Screen
Non Programmable
5/2 Day Programming Mode
7 Day Programming Mode
24 Hour Programming Mode
Number of Heating Levels
Optimum Start
Holiday Function
Temperature Hold Function
Temperature Override
Temperature Override Limit
Frost Protection
App Control
C/F Option
Remote Air Sensor Connection
Built in Air Sensor
Floor Sensing Mode
Floor Sensor Included
Max Switching Current
Accuracy
Adjustable Switching Differential
Supply
Output
Installed Dimensions
Features
Timer Mode
Display
Non Programmable
7 Day Programming Mode
Number of Heating Levels
Holiday Function
Temperature Override
Frost Protection
C/F Option
Built in Air Sensor
Floor Sensor Included
Accuracy
Supply
Installed Dimensions
neoUltra
Y
Y
05-35C / 41-95F
3.5” TFT LCD
Y
Y
Y
Y
Y
4
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
3A
+/- 1C
+/- 3C
230V AC
Volt free contact
107x89x17mm
neoUltra
Y
3.5” TFT LCD
Y
Y
4
Y
Y
Y
Y
Y
N
+/- 1C
230V AC
107x89x17mm
HeadlineInformation
KeyFeaturesThermostat & Central Control The Heatmiser neoUltra is a thermostat and central control in one, making the neoUltra the perfect addition to your Neo System. Install the neoUltra in a central position in your home and benefit from the always-on central control for all your heating zones, hot water and neoPlugs.
Mounting TypeneoUltra – Flush Mounting
Temperature Range05-35C 41-95F
Lock FacilityYes
Indication TypeTFT LCD with Backlight
Dimensions (When installed)107x89x17mm
Heat or TimerThe Heatmiser neoUltra has been designed to work in thermostat or timer mode, so is perfect for controlling heating zones or timer zones such as towel rails and hot water.
Energy Saving Optimum StartneoUltra calculates the amount of heat up time required to ensure your home is warm when you wake and return home. This is automatically optimised throughout the year to save money.
Global FunctionsWith the Heatmiser neoUltra you can make changes for multiple rooms in your home at the same time. So, whether you want to enable the Away function on your way out or boost the temperature in a couple of rooms, with the neoUltra it couldn’t be easier.
The neoUltra has been designed to work as a standalone thermostat, or as part of an app controlled Neo System. In addition, the neoUltra can operate as a central controller, providing a single point of access to all of the neoStat, neoAir & neoPlug in the home.
neoUltra Central Control
17Stylish Thermostats For Modern Living
The neoStats have been designed to be simple to use and make programming simple with the new intuitive menu navigation. The neoStats can be controlled from anywhere thanks to the plug and play neoHub, and are available in Glacier White, Sapphire Black and Platinum Silver.
Modern touch technology
Modern Appearance The neoStat and neoAir have been designed to compliment any home décor.
Temperature Hold Facility Allows you to hold a set temperature for a specific duration - ideal for parties. After which, the thermostat will revert back to the programmed setting.
HeadlineInformation
KeyFeatures
Energy Saving Optimum Start Calculates the amount of heat up time required to ensure your home is warm when you wake and return home. This is automatically optimised throughout the year to save you money.
Soft Touch OperationModern touch sensitive keys provide a clean smooth interface, adding further to the premium feel of the neoStat series.
Easy NavigationThe neoStat/neoAir series offer an easy to navigate programming system, providing all of the options across the bottom of the back lit display.
Battery Model The neoAir is powered by 4 AAA batteries and provides a totally wire free solution. The neoAir communicates with the UH8-RF and RF Switch Receivers and can be paired to the neoHub to provide App Control.
Remote SensingneoStat can be used with a remote air and remote floor sensor, whereas the neoAir has one remote sensor connection that can be used for remote air or floor temperature monitoring.
Heat or Timer OptionThe neoStat has been designed to work as a thermostat or timer, selectable in software. The neoAir can be set to work as a thermostat, timer or combined model that offers heating and timer control – perfect for controlling heating and hot water from a single device. Flexible programming means reduced SKU’s for stockists.
Wireless NetworkingneoStat and neoAir communicate wirelessly to the neoHub to offer a reliable and scalable network system. The mains powered neoStat automatically repeats the data signal from other neoStat/neoAir in the home. If there are no neoStat’s installed, the neoAir communicates directly with the neoHub and so the neoPlug or Boost can be used to extend the communication distance.
Wireless ThermostatsneoStat
The neoStats have been designed to be simple to use and make programming simple with the new intuitive menu navigation. The neoStats can be controlled from anywhere thanks to the plug and play neoHub, and are available in Glacier White and Sapphire Black.
Modern touch technology
Modern Slimline AppearanceThe neoStat thermostat series is flush mounting, resulting in a depth of only 15mm after installation.
Temperature Hold FacilityAllows you to hold a set temperature for a specific duration - ideal for parties. After which, the thermostat will revert back to the programmed setting.
Mounting TypeFlush mounting
Temperature Range05-35°C 41-95°F
Lock FacilityYes - All models
Indication TypeLCD with Blue Back Light
Dimensions85x85x40mm (L,H,D)(15mm Installed)
E.U. Back Box
HeadlineInformation
KeyFeatures
Energy Saving Optimum StartCalculates the amount of heat up time required to ensure your home is warm when you wake and return home. This is automatically optimised throughout the year to save you money.
Soft Touch OperationModern touch sensitive keys provide a clean smooth interface, adding further to the premium feel of the neoStat series.
Easy NavigationThe neoStat series offers an easy to navigate programming system, providing all of the options across the bottom of the blue back lit display.
Perfect for New Build &
Retrofit As the neoStat is mains powered, it is perfect for new homes and for retrofitting to existing properties as there are no requirements for CAT5 Data cable and you don’t need to worry about replacing batteries either!
Heat or Timer OptionThe neoStat can be setup to work in either Heat or Timer mode, so is perfect for controlling heating zones or timer zones such as towel rails and hot water. The quick setup menu enables the installer or home owner to select between the two modes, and by incorporating the two modes into one product means one less SKU for stockists.
Wireless NetworkingAlthough the heating signal is hard wired, the communication data is sent wirelessly via our mesh network to the neoHub. Our Neo network has been designed to offer a reliable and scaleable network system, offering control of up to 32 neoStats on one network. The neoHub will automatically route the data around your home ensuring range is never an issue.
16
Mounting TypeneoStat Flush MountingneoAir Surface/Desk Stand
Temperature Range05-35°C 41-95°F
Lock FacilityYes - All models
Indication TypeLCD with Back Light
Dimensions neoStat 85x85x15mm (L,H,D)neoAir 85x85x26mm
E.U. Back BoxneoStat Only
18
Thermostat Mode
Timer Mode
Heating & Timer Mode
Temperature Range
Back Lit Screen
Non-Programmable Mode
5/2 Day Programming Mode
7 Day Programming Mode
24 Hour Programming Mode
Number of Heating Levels
Optimum Start
Number of HW Times
Holiday Function
Temperature Hold Function
Temperature Override
Temperature Override Limit
Frost Protection
App Control
°C / °F Option
Remote Air Sensor Connection
Built In Air Sensor
Floor Sensing Mode
Floor Sensor Included
Max Switching Current
Accuracy
Adjustable Switching Differential
Supply
Output
Installed Dimensions
Wireless Switching to UH8/RF Switch
Thermostat Mode
FEATURES STANDARD MODELS
Y
Y
N
05-35 °C41-95 °F
Y
Y
Y
Y
Y
4
Y
0
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
3A
+/- 1°C
+/- 1-3°C
230VAC
Volt Free Contact
neoStat-hwneoStat neoStat-e neoAir
Y
Y
N
N/A
Y
N
Y
Y
Y
N/A
N
4
Y
N
N
N
N
Y
N
N
N
N
N
3A
N/A
N/A
230VAC
Changeover
Y Y
ELECTRIC FLOOR MODEL
Y
Y
N
05-35 °C41-95 °F
Y
Y
Y
Y
Y
4
Y
0
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
16A +/-
1°C +/-
1-3°C
230VAC
230VAC
Y
BATTERY MODEL
Y
Y
Y
05-35 °C41-95 °F
Y
Y
Y
Y
Y
4
Y
4
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N/A
+/- 1°C
+/- 1-3°C
4 x AAA
N/A
Back Lit Screen Y Y Y Y
Heating & Timer Mode N N N Y
Y
5/2 Day Programming Mode Y Y Y Y
24 Hour Programming Mode Y Y Y Y
Optimum Start Y N Y Y
Holiday Function Y Y Y Y
Temperature Override Y N Y Y
Frost Protection Y N Y Y
Built In Air Sensor Y N Y Y
Floor Sensor Included N N Y N
Accuracy +/- 1°C N/A 1°C +/- +/- 1°C
Supply 230VAC 230VAC 230VAC 4 x AAA
Installed Dimensions
°C / °F Option Y N Y Y
85x85x15mm (L,H,D) 85x85x15mm (L,H,D)
N N N N
85x85x26mm (L,H,D)
Remote Sensor ProbePart Ref: Heatmiser MISC103This remote sensor probe can be used to measure air and floor temperature. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required.
Thimble SensorPart Ref: Heatmiser Thimble SensorThe Heatmiser Thimble sensor is ideal for discrete temperature monitoring and is compatible with all Heatmiser Thermostats with a remote sensor connection.
Available In Three Stunning Colours
neoAir - Glacier White
neoStat - Glacier White
19Stylish Thermostats For Modern Living
Base Level Heating & Radiator System
Connections for8 x Zone outputs (suitable for 230v actuators)230v Output for UFH Pump & Valve ControlVolt Free Boiler Enable
Component DimensionsTime Clock 110x100x17mm (L,H,D)Set Back Thermostat 86 x 86 x 19mm (L,H,D)Wiring Centre 384 x 148 x 60mm (L,H,D)
ProvidingWiring centre, controlling up to 8 zones4 Zone Master Time Clock230v Set Back Thermostat in each room
Product List8 Zone Wiring CentrePart Ref: Heatmiser UH8(See page 31)4 Zone Time ClockPart Ref: Heatmiser TM4(See page 09)Set Back ThermostatPart Ref: Heatmiser DS-SB(See page 03)
HeadlineInformation
KeyFeatures
Set Back FunctionThe set back function is a simple way of reducing
DIN Rail MountingThe UH8 wiring centre can be DIN Rail Mounted for simple, easy installation.
temperature when the heating is timed to be
according to the time clock controlling the system.
temperature set on the dial during the timed period and will automatically reduce the set temperature
Simple ConnectivityThe UH8 allows the connection of up to eight 230v room thermostats. On demand from any zone, a 230v output is provided to switch the
pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers.
Radiator Zone ControlA simple slide switch makes zone eight suitable for controlling a radiator zone. When used for controlling radiators, zone 8 does not enable the
Neon Indication Neon indicators are provided on the UH8 allowing you to see the power, valve, boiler and zone status without the need to remove the cover.
230v Models Are designed to work with our UH8 wiring centre and dial thermostat with set back function,
Our base level water under�oor heating system uses our UH8, 8 Zone wiring centre. With the �ush mount set back thermostats and 4 zone touchscreen time clock, this creates a simple, yet cost e�ective solution.
Our base level heating system o�ers simple bute�ective control of up to eight zones*.The UH8 wiring centre is the hub of this systemand is designed to work with our four channel230v Time Clock (TM4) and 230v Set BackThermostat (DS-SB). On board the UH8 are twoheating time channels. Each zone allows you tospecify which time channel it should follow.Two additional time channel connections areprovided for hot water control or other auxiliarydevices.
* Additional zones can be controlled with the useof a second UH8.
Base Level Water Underfloor Heating & Radiator System 20
LA2
A1
NL
A2
A1
NL
neoStat(Connected to Zone 1)
Heating or Manifold Valve
PLSL
L N L N
L N
L N L N LL N
1 2 3 4 1 2
L
1 2
L
1 21 2
(Connected to Zone 2)
neoStat(Connected to Zone 8)
UH3YES
NO
L
1 2
L
1 2
L
1 2 1 2
Boiler(Heating Enable Terminals)
PERMANENT LIVESWITCH LIVE
230V AC Supply(Via Heating/Hot Water System Fused Spur)
PLSL
UFH Manifold(Using 230v Actuators)
To BoilerEnable
Radiator Zone Valve
Zone 8 Isolation SwitchIf set to YES, Zone 8 enables the Boiler Pump and Valve.
If set to NO Zone 8 is isolated.
ZONE1 ZONE 3 ZONE 4ZONE 2 ZONE 5 ZONE 7 ZONE 8ZONE 6TIME CLOCK
N N N N N SLSLSLSLSLSL
ZONE 3 ZONE 4ZONE 2 ZONE 5 ZONE 7 ZONE 8ZONE 6UFH PUMP
BOILER
MAINSSUPPLY
FUSE
ZONE 1
NL L N N NL SL SLL
N L N
A2
A1
neoStat
N
Standard Products
8 Zone Wiring CentrePart Ref: Heatmiser UH3
neoStat (Timer)
A1 A2NOTUSED
NOTUSED L N
POWER SUPPLY3A 230V
NC
CYLINDERTHERMOSTAT
NO
C
230VAC
BOILERENABLE
HOT WATERVALVE
MOTOR
neoStat (Heat Mode)Part Ref: neoStat
neoStat (Timer Mode)Part Ref: neoStat
neoHubPart Ref: neoHub
UFH UFH UFH UFH HEATING
UH8
TM4-TS TIMER DS-SB STAT DS-SB STAT DS-SB STAT DS-SB STATDS-SB STAT
UFHPUMP
ZONE 4 ZONE 6ZONE 2 ZONE 8ZONE 3 ZONE 5 ZONE 7ZONE 1UFH VALVE HEATENABLE
MAINS
NNNNN
N NNNNNNNN1 11 1 11 1 11
-TR-TR-TR +TR+TR+TR-TR LSLSLS+TRCH1 CH2 CH3 CH4 SL
2 22 2 22 2 22 LSLSLSLSLSLSLSSLTIME CLOCK ZONE 2 ZONE 3 ZONE 4 ZONE 7 ZONE 8ZONE 1
LLLLL
L EEEEEEE LLLLLLLEL
L LL LL L LL L LL LL L LLLGRL
L
EOREE
EE
N NN NN N NN N NN NN N NNNN
N
LRLS
FOUR CORE ANDEARTH 1.5 CABLE
5A FUSE
LS AND LR ISVOLT FREE
R1
R2
MAINSSUPPLY
N -TR+TRLSL
ZONE 5 ZONE 6 ZONE 7
BOILERENABLE
LL LL NN NN
ZONE 4ZONE 2 ZONE 3ZONE 1
VALVE WITH ENDSWITCH
UFH VALVE
UFH PUMP
UFM UNDER FLOOR MANIFOLD
RADIATOR VALVE
TIMER LIVE
LIVE
SWITCH LIVE
NEUTRAL
EARTH
END SWITCH ANDBOILER ENABLE
This equipment should be installed by an appropiately qualified/registered electrician.Fully read the instructions for proper wiring before applying power.The warranty does not cover damage from improper wiring or installation.
PLEASE ADD LINK TO GR AND OR IFVALVE NOT FITTED
ACTUATOR 230V
ACTUATOR 230V
ACTUATOR 230V
ACTUATOR 230V
UFH
RAD
ZON E 8 TY PE
Set Back ThermostatPart Ref: Heatmiser DS-SB
8 Zone Wiring CentrePart Ref: Heatmiser UH8
4 Zone Time ClockPart Ref: Heatmiser TM4-TS
LSLN
TM4 Time Clock(4 Independant Channels)
DS-SB Thermostat(Connected to Channel 1)
Heating or Manifold Valve
PLSL
L N L N
L N
L N L N LL N
1 2 3 4 1 2
L
1 2
L
1 2
NL
1 2
DS-SB Thermostat(Connected to Channel 2)
DS-SB Thermostat(Connected to Channel 1)
UH3YES
NO
L
1 2
L
1 2
L
1 2 1 2
LSLN
LSLN
Boiler(Heating Enable Terminals)
PERMANENT LIVESWITCH LIVE
230V AC Supply(Via Heating/Hot Water System Fused Spur)
PLSL
UFH Manifold(Using 230v Actuators)
To BoilerEnable
Radiator Zone Valve
Zone 8 Isolation SwitchIf set to YES, Zone 8 enables the Boiler Pump and Valve.
If set to NO Zone 8 is isolated.
ZONE1 ZONE 3 ZONE 4ZONE 2 ZONE 5 ZONE 7 ZONE 8ZONE 6TIME CLOCK
N N N N N SLSLSLSLSLSL
ZONE 3 ZONE 4ZONE 2 ZONE 5 ZONE 7 ZONE 8ZONE 6UFH PUMP
BOILER
MAINSSUPPLY
FUSE
ZONE 1
NL L N N NL SL SLL
N L N
Standard Products
8 Zone Wiring CentrePart Ref: Heatmiser UH3 4 Zone Time Clock
Part Ref: Heatmiser TM4-TSSet Back Thermostat
Part Ref: Heatmiser DS-SB
21Stylish Thermostats For Modern Living
Wireless Water Underfloor Heating & Radiator System
Simple Pairing ProcessUp to 99 UH8-RF’s can be used within thesame building, allowing control of up to apossible 792 zones. Each UH8-RF has anaddress setting clearly marked on the PCB.This address, along with the relevant zonenumber is congured in the thermostatand that’s it – a simple to install, setup andoperate system.
Hot Water ControlThe UH8-RF also takes care of the hot water.A volt free changeover output is providedfor the cylinder stat/hot water valve.The neoAir provides time and temperature control of the heating and time control of the hot water.
Pump & Boiler DelayThe UH8-RF offers an optional pump and boiler delay feature. This 2 minute delay is designed to prevent boilers from going to lockout by giving the zone actuators time to open.
Radiator or UnderfloorA software option in the thermostat allows you to configure which zones are underfloorheating and which zones are radiators.Radiator zones will not enable the underfloor heating pump and underfloor heating valve where there is a call for heat.
DIN Rail MountingThe UH8-RF wiring centre can be DIN Rail Mounted for simple, easy installation.
HeadlineInformation
KeyFeatures
ProvidingWiring centre, controlling up to eight zones Wireless thermostat in each room
Product List8 Zone Wiring Centre (expandable up to 792 Zones) Part Ref: UH8-RF (See page 30)
Compatible wireless thermostats Example:neoAir Wireless Thermostat Part Ref: neoAir
Optional ProductsExternal AerialPart Ref: EA1
Wireless RepeaterPart Ref: Boost/neoPlug
Internet GatewayPart Ref: neoHub
App ControlWhen paired to a neoHub, the neoAir can be controlled from the neoApp – available on WindowsPhone, iOS and Android.Up to 32 neoAir can be paired to a single neoHub. For systems with more zones, additional neoHubs would be required.
Wireless Multi Zone App Control SystemOur multi zone wireless system with app control provides a complete solution for those with underfloor or radiators. The neoAir communicates wirelessly with the UH8-RF 8 Zone receiver and the neoHub to offer local and remote control via the neoApp.
Designed to be easy to install and operate
Wireless RepeaterThe Heatmiser Boost is our surface mount repeater for the RF System, designed to extend the communication distance between the thermostat and receiver.
neoPlug CompatibleThe neoPlug can be used to extend the wireless coverage between the thermostat and neoHub and also the switching receiver. In addition, the power outlet can be controlled from the neoApp.
22
LA2
A1
NL
A2
A1
NL
neoStat(Connected to Zone 1)
Heating or Manifold Valve
PLSL
L N L N
L N
L N L N LL N
1 2 3 4 1 2
L
1 2
L
1 21 2
(Connected to Zone 2)
neoStat(Connected to Zone 8)
UH3YES
NO
L
1 2
L
1 2
L
1 2 1 2
Boiler(Heating Enable Terminals)
PERMANENT LIVESWITCH LIVE
230V AC Supply(Via Heating/Hot Water System Fused Spur)
PLSL
UFH Manifold(Using 230v Actuators)
To BoilerEnable
Radiator Zone Valve
Zone 8 Isolation SwitchIf set to YES, Zone 8 enables the Boiler Pump and Valve.
If set to NO Zone 8 is isolated.
ZONE1 ZONE 3 ZONE 4ZONE 2 ZONE 5 ZONE 7 ZONE 8ZONE 6TIME CLOCK
N N N N N SLSLSLSLSLSL
ZONE 3 ZONE 4ZONE 2 ZONE 5 ZONE 7 ZONE 8ZONE 6UFH PUMP
BOILER
MAINSSUPPLY
FUSE
ZONE 1
NL L N N NL SL SLL
N L N
A2
A1
neoStat
N
Standard Products
8 Zone Wiring CentrePart Ref: Heatmiser UH3
neoStat (Timer)
A1 A2NOTUSED
NOTUSED L N
POWER SUPPLY3A 230V
NC
CYLINDERTHERMOSTAT
NO
C
230VAC
BOILERENABLE
HOT WATERVALVE
MOTOR
neoStat (Heat Mode)Part Ref: neoStat
neoStat (Timer Mode)Part Ref: neoStat
neoHubPart Ref: neoHub
MAINSSUPPLY3 AMP
BOILERENABLE
VALVEPUMPZONE 4 ZONE 6ZONE 2 ZONE 8ZONE 3 ZONE 5 ZONE 7ZONE 1H/WRELIOBNI SNIAM
L LL LL L LL L LL LL L LL LL EE NONO EN NN NN N NN N NN NN N NN NN
L LL L L LL N NN N N NN
6 ENOZ4 ENOZZONE 2 ZONE 3 ZONE 5 ZONE 7ZONE 1
VALVE WITHENDSWITCH
HOT WATERVALVE
UFH PUMP
UFHVALVE
RADIATORVALVE
UH8-RF
N NCNCL CC
This equipment should be installed by an appropriately quali�ed/ registered electrician.Fully read the instructions for proper wiring before applying power.The warranty does not cover damage from improper wiring or installation.
ACTUATOR 230V
ACTUATOR 230V
ACTUATOR 230V
ACTUATOR 230V
ACTUATOR 230V
ACTUATOR 230VACTUATOR
230V
8
3
3 9
4
4 111210
5
5NO
NO
6
1
1 72 2
BOILER RF TESTCREEPAGE ENABLEPUMP DELAY ENABLE
BOILER RF TESTCREEPAGE ENABLEPUMP DELAY ENABLE
110
ZON
E 1
ZON
E 2
ZON
E 3
ZON
E 4
ZON
E 5
ZON
E 6
ZON
E 7
ZON
E 8
H/W
PU
MP
BO
ILER(TENS) (UNITS) BOILER
PAIRING
HW STAT
UFM UNDER FLOOR MANIFOLD
LIVE
NEUTRAL
EARTH
END SWITCH ANDBOILER ENABLE
FUSE
5A
800M
A
ZONE
1ZO
NE 2
ZONE
3ZO
NE 4
ZONE
5ZO
NE 6
ZONE
7ZO
NE 8
H/W
PUM
PBO
ILER
FUSE
2A
8 Zone Wiring CentrePart Ref: Heatmiser UH8-RF
neoAirGlacier White
Optional Desk Stand
neoHubPart Ref: neoHub
neoAir(Wireless Thermostat)
neoAir(Wireless Thermostat)
neoAir(Wireless Thermostat)
neoAir(Wireless Thermostat)
neoAir(Wireless Thermostat)
neoAir(Wireless Thermostat)
neoAir(Wireless Thermostat)
Radiators UnderfloorHeating
23Stylish Thermostats For Modern Living
Low Voltage Network Control Solution
ProvidingWiring Centre, controlling up to 8 zones12v Programmable Thermostats in each roomOptional Central Control
Product List8 Zone Wiring Centre (expandable up to 32 Zones)Part Ref: Heatmiser UH1 (See page 30)Slimline ThermostatPart Ref: Heatmiser Slimline-N(See page 04-05 for complete slimline range)TouchScreen Thermostat Part Ref: Heatmiser Touch-N (See page 06-07 for complete TouchScreen range)
Cable TypeBelden 9538 or Cat5(e)-ftp
Optional ProductsCentral ControlPart Ref: Heatmiser TouchPad(See page 28-29 for details)
HeadlineInformation
KeyFeaturesComplete Network Control
32 zones. What’s more, it provides the ability to control the entire heating system centrally, with the TouchPad. Designed to be used in conjunctionwith our Slimline or TouchScreen 12v Network Thermostats, our deluxe heating system really is a complete package for those wanting superior control of their heating system.
Simple ConnectivityThe UH1 allows the connection of up to eight 12v Network Thermostats. On demand from any zone, a 230v output is provided to switch
pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers.
Radiator Zone ControlA simple slide switch makes zone 8 suitable for controlling a radiator zone. When used for controlling radiators, zone 8 does not enable
Hot Water ControlThe UH1 also takes care of the hot water. A cylinder thermostat connection and a 230v hot water valve output are provided. Controlling the hot water from
the wiring, but also because it enables you to control your hot water centrally from the TouchPad and remotely from the NetMonitor.
Use the Heatmiser Touchpad for instant access to your heating system.
Total control of your home heating system
Central Control
Optional Products
Low Voltage Network Control Solution 24
UFH Manifold(Using 230v Actuators)
UH1
To BoilerEnable
Radiator Zone Valve
Zone 8 Isolation SwitchIf set to YES, Zone 8 enables the Boiler Pump and Valve.
If set to NO Zone 8 is isolated.
Slimline-N(Programmable Thermostat)
BOILERENABLE
(VOLT FREE)
DHW
ZONE1 ZONE 3 ZONE 4
NETWORKTOUCHPAD
FUSE 1ACTUATORS
FUSE 3CONTROLS
FUSE 412V FUSE CONTROL
FUSE 2
STAT 6VALVEAND
PUMPENABLE
VALVE
N
Y
SLIMLINE-HWN
+B-
YA2
A1
H A
ZONE 2 ZONE 5 ZONE 7 ZONE 8ZONE 6
PUMP
ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6 ZONE 7 ZONE 8
+B-
Y
Network Link(To Other UH1 Units)
BY
B
Y
+B-
YA2
A1
230V AC Supply(Via Heating/Hot Water System Fused Spur)
Boiler(Heating Enable Terminals)
Hot Water Control(Optional)
DHW Thermostat
DHW Zone Valve
PL
SL
PERMANENT LIVESWITCH LIVE
To BoilerEnable
+BB2-
YA1 B1
A2
SLL
L N
L N
NL
N N N N
B- A2
+ YA1
B- A2
+ YA1
B- B2A2
+ YA1 B1+ Y
- B
LN
L L L L
Central TouchPad(Optional Central Control)
Slimline-HWN(Hot Water Control Thermostat)
Touch-N(TouchScreen Thermostat)
Fri 10:23h
H A
NL
8 Zone Wiring CentrePart Ref: Heatmiser UH1
Slimline ThermostatPart Ref: Heatmiser Slimline-N
TouchScreen ThermostatPart Ref: Heatmiser Touch-N
Standard Products
25Stylish Thermostats For Modern Living
Mains Voltage Network System
Mains Voltage Network System
Our Mains Wired Neo Network is perfect for new build and retrofit markets. Don’t worry about installing CAT5 cabling or WiFi Networkcoverage around the home, our Neo Network System offers a simple to install system that is expandable.
Network control of your mains wired heating system from your Smartphone and Tablet
Neo NetworkThe Neo Network System is designed toprovide reliable communication of thethermostat data whilst at the same timeproviding an extended communication range.Each neoStat thermostat acts as a repeateron the network, helping to eliminate rangeissues which are common on standard RFsystems.
Easy UpgradeCustomers with existing 230v thermostatscan upgrade to the Neo Network System andtake control of their system from anywhere.The neoHub gateway connects the neoStatsto the internet for access via a Smartphone orTablet both in the home and remotely fromanywhere in the world.
Simple ConectivityThe UH8 allows the connection of up to eight230v thermostats. On demand from anyzone, a 230v output is provided to switch therelevant zone actuator, underfloor heatingpump and valve. A volt free connection issupplied for the boiler, making it compatiblewith almost all types of boilers.
Radiator Zone ControlA simple slide switch make’s zone eight suitable for controlling a radiator zone. When used for controlling radiators, zone 8 does not enable the underfloor heating pump, valve and boiler.
Neon IndicationNeon indicators are provided on the UH8 allowingyou to see the power, valve, boiler and zone statuswithout the need to remove the cover
neoStat Thermostat FlexibilityThe neoStat can be set to operate in heatingor timer mode, allowing the installer to selecton installation if the thermostat will be usedto control a heating zone or a timed appliance,such as the hot water or perhaps a towel rail.
DIN Rail MountingThe UH8 wiring centre can be DIN Rail Mountedfor simple, easy installation.
HeadlineInformation
KeyFeatures
Connections for8 x Zone outputs(suitable for 230v actuators)230v Output for UHF Pumpand Valve controlVolt free Boiler Enable
Component DimensionsUH8 Wiring Center 384 x 148 x 60mm (L,H,D)
ProvidingWiring centre, controllingup to 8 zones8 Neo Mains NetworkThermostats
Product List8 Zone wiring centrePart ref: Heatmiser UH8(See page 31)7 x neoStat in Heating mode1 x neoStat in Timer mode(See page 16-17)NeoHub
Optional ProductsHeatmiser Boost/neoPlug has been designed to extend the range of your Neo System, ensuring the network can reach every part of your home.
Wireless RepeaterThe Heatmiser Boost is our surface mount repeater, designed to extend the wireless coverage between the thermostat and neoHub and also the switching receiver.
neoPlug CompatibleThe neoPlug can be used to extend the wireless coverage between the thermostat and neoHub and also the switching receiver. In addition, the power outlet can be controlled from the neoApp.
26
LA2
A1
NL
A2
A1
NL
neoStat(Connected to Zone 1)
Heating or Manifold Valve
PLSL
L N L N
L N
L N L N LL N
1 2 3 4 1 2
L
1 2
L
1 21 2
(Connected to Zone 2)
neoStat(Connected to Zone 8)
UH3YES
NO
L
1 2
L
1 2
L
1 2 1 2
Boiler(Heating Enable Terminals)
PERMANENT LIVESWITCH LIVE
230V AC Supply(Via Heating/Hot Water System Fused Spur)
PLSL
UFH Manifold(Using 230v Actuators)
To BoilerEnable
Radiator Zone Valve
Zone 8 Isolation SwitchIf set to YES, Zone 8 enables the Boiler Pump and Valve.
If set to NO Zone 8 is isolated.
ZONE1 ZONE 3 ZONE 4ZONE 2 ZONE 5 ZONE 7 ZONE 8ZONE 6TIME CLOCK
N N N N N SLSLSLSLSLSL
ZONE 3 ZONE 4ZONE 2 ZONE 5 ZONE 7 ZONE 8ZONE 6UFH PUMP
BOILER
MAINSSUPPLY
FUSE
ZONE 1
NL L N N NL SL SLL
N L N
A2
A1
neoStat
N
Standard Products
8 Zone Wiring CentrePart Ref: Heatmiser UH3
neoStat (Timer)
A1 A2NOTUSED
NOTUSED L N
POWER SUPPLY3A 230V
NC
CYLINDERTHERMOSTAT
NO
C
230VAC
BOILERENABLE
HOT WATERVALVE
MOTOR
neoStat (Heat Mode)Part Ref: neoStat
neoStat (Timer Mode)Part Ref: neoStat
neoHubPart Ref: neoHub
BOILERENABLE
UFHPUMP
ZONE 4 ZONE 6ZONE 2 ZONE 8ZONE 3 ZONE 5 ZONE 7ZONE 1UFH VALVE HEATENABLE
MAINS SUPPLY
MAINS
NNNNN
N NNNNNNNN
---- 1A1A1A1A-A1
1 11 1 11 1 11
2TR2TR2TR2TR 1TR1TR1TR1TR2TR 2A2A2A2A1TRA2
2 22 2 22 2 22 LSLSLSLSLSLSLSSLTIME CLOCK ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6 ZONE 7 ZONE 8ZONE 1
LLLLL
L EEEEEEE LLLLLLLEL
L LL LL L LL L LL LL L LLLGRL
L
EORE LR E
EE
N NN NN N NN N NN
UFH
RAD
NN N NNNN
N
LL LL NN NN
ZONE 4ZONE 2 ZONE 3ZONE 1
VALVE WITH ENDSWITCH
UFH VALVE
UFH PUMP
UFH UFH UFH UFH HEATING
RADIATOR VALVE
UH8
IN OUT ISVOLT FREE
LS
ZON
E 8 TY P
E
THREE CORE ANDEARTH 1.5 CABLE
NEO STAT NEO STAT NEO STAT NEO STAT NEO STAT
This Equipment should be installed by an appropiately quali�ed/ registered electrician.Fully read the instructions for proper wiring before applying power.The warranty does not cover damage from improper wiring or installation.
5A FUSE
PLEASE ADD LINK TO GR AND OR IFVALVE IS NOT FITTED
ACTUATOR230V
ACTUATOR230V
ACTUATOR230V
ACTUATOR230V
UFM UNDER FLOOR MANIFOLD
TIMER LIVE
LIVE
SWITCH LIVE
NEUTRAL
EARTH
END SWITCH ANDBOILER ENABLE
Neo Central ControlPart Ref: Heatmiser neoUltra
8 Zone Wiring CentrePart Ref: Heatmiser UH8
neoStat (Heat Mode)Part Ref: neoStat
neoStat (Timer Mode)Part Ref: neoStat
neoHubPart Ref: neoHub
Standard Products
27Stylish Thermostats For Modern Living
Central Control
Central ControlPart Ref: Heatmiser TouchPad
Up to 32 rooms can be controlled from the full colour TFT Display meaning that walking around each room to turn up or down the heating is a thing of the past.
DisplayTouchScreen 4.3” TFT Colour LCD
Number Of Zones32 (Max)
TitlesGive each room a title
Passcode ProtectWhen enabled, the user must enter a passcode in order to access the system.
HeadlineInformation
KeyFeaturesHome and AwayThis feature gives you a simple
system whilst you are away. On your return, pressing the Home button will re-enable the system. Ideal when you have a holiday home and are not sure when you will return.
Temperature HoldUse this function to hold a desired temperature
for unexpected activities. Apply to a single or multiple rooms.
Copy FacilitySave time - copy comfort levels between rooms.
Auto GMT CorrectionAutomatically adjusts the clocks in all of the thermostats at the start of summer and winter time.
HistoryThe TouchPad will store hours of temperature history.
Designed to work with our 12v Network Thermostats, the Heatmiser Touchpad provides central control of your home heating system.
Designed to give Central Control within your home
USB ExportThe temperature log can be exported via the USB connection.
HolidayUse the holiday feature to put the heating into frost mode whilst you are away. At the end of the holiday, each room will revert back to the programmed time, ensuring your home is warm on your return.
Gives the ability to store a set of comfort levels for a group of rooms. This setting can be applied as and when required, for example at the start of a new shift.
Key LockLock each thermostat to prevent misuse.
Hot Water BoostUse the hot water boost to quickly override the hot water settings.
Quick ViewSee at a glance the current thermostat status throughout your building.
Auto Time SyncSyncronises all of the thermostat clocks on the network.
Central Control 28
Intuitive User InterfaceIntuitive User Interfac
Central Control Temperature Hold Home & Away
29Stylish Thermostats For Modern Living
12v Network Thermostat Wiring Centre Part Ref: Heatmiser UH1
The UH1 is designed to be used in conjunction with our 12v network thermostats. The UH1 provides central switching and is therefore ideally
as well as providing an output for a hot water cylinder. On demand from any zone, a 230v output is provided to switch the relevant zone actuators,
boiler, making it compatible with almost all types of boilers. Up to six actuators can be connected to each zone. An option is provided to turn zone 8 into a
not enabled when there is a call for heat from zone 8.
Wireless 230v 8 Zone Wiring Centre Part Ref: Heatmiser UH8-RF
Central Wiring Switch BoxesOur central wiring switch boxes have been designed to simplify the wiring process. Using our wiring centres in your application means that the actuator, boiler and pump connections are wired from a single point.
Multi-zone wiring centres - Designed to make installation simple
UH1-W is not suitable for use in Australia and New Zealand.Heatmiser UH1 Heatmiser UH1-WHeatmiser UH1
The UH8-RF is designed to be used in conjunction with our compatiblewireless thermostats. The UH8-RF provides central switching and is thereforeideally situated next to the under�oor heating manifold. Eight zones can becontrolled as well as providing an output for hot water control. On demandfrom any zone, a 230v output is provided to switch the relevant zoneactuators, under�oor heating pump and valve. A volt free connection issupplied for the boiler, making it compatible with almost all types of boilers.Up to six actuators can be connected to each zone. An external aerial is availablefor use when the UH8-RF is being mounted in a metal cupboard or when thewireless signal is restricted. A software option in the thermostat allows you tocon�gure which zones are under�oor heating and which zones are radiators.
Heatmiser UH8-RFUH8-RF is not suitable for use in Australia.
Central Wiring Switch Boxes
TOBOILER HEAT
HEAT
SUPPLYTO
ACTUATORS
230vSTAT
L L N NZONE 2
SUPPLYTO
ACTUATORS
230vSTAT
L L N NZONE 4
RADS
UFH
SUPPLYTO
ACTUATORS
230vSTAT
L L N NZONE 3
MANIFOLD PUMP OR
VALVE
POWER
MAINS SUPPLY
SUPPLYTO
ACTUATORS
ZONE 1
L L N N
230vSTAT
HWVALVE
HOT WATER
HW Time Clock
230v 4 Zone Wiring CentrePart Ref: Heatmiser UH4
12v Network Thermostat Wiring CentrePart Ref: Heatmiser UH1
Heatmiser UH4
The UH4 can be used in conjunction with our mains thermostats. The UH4 provides central switching of up to four zone actuators as well as providing an output for a hot water cylinder and the heating system boiler and pump. When used for underfloor heating, an option is available to use zone 4 for conventional radiator control. Up to six actuators can be connected to each zone.
30
230v 4 Zone Wiring Centre Part Ref: Heatmiser UH4
230v 8 Zone Wiring Centre Part Ref: Heatmiser UH8
The UH3 is designed to work with our four channel 230v time clock (TM4) and 230v Set back thermostat (DS-SB) but equally could be used with any 230v room thermostat. Up to eight zones can be controlled from the UH3. On board the UH3 are two heating time channels, each zone allows you to specify which time channel it should follow. Two additional time channel connections are provided for hot water control or other auxiliary devices. On demand from any
and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers. A simple slide switch makes zone 8 suitable for controlling a radiator zone.
valve and boiler. Up to four actuators can be connected to each zone.
UFHPUMP
TM4 DS-SB DS-SB DS-SBYES
NO
Heatmiser UH2 Heatmiser UH3
BOILER MAINSSUPPLY PRT/HW PRT PRT PRT
ZONE 1 ZONE 2 ZONE 3 ZONE 4
HOT WATERTHERMOSTAT HOT WATER
VALVE/PUMPHEATING
PUMP
PIPETHERMOSTAT
THERMOSTATSACTUATORS
UFHVALVE
SUPPLY TOACTUATORSOR VALVES
SUPPLY TOACTUATORSOR VALVES
SUPPLY TOACTUATORSOR VALVES
MAINSSUPPLY
TOBOILER
DIAL TYPETHERMOSTAT
DIAL TYPETHERMOSTAT
DIAL TYPETHERMOSTAT
TIME CLOCKTHERMOSTAT
VALVE ZONE 1 ZONE 2 ZONE 8
Heatmiser UH4 Heatmiser UH8
Our UH4 and UH8 wiring centres are designed to work with our 230v thermostats. The new UH4 is ideal for smaller systems, up to four zonesand the UH8 for eight zones.
Mains Thermostats Compatible Wiring Centres
The UH4 can be used in conjunction with our 230v mains thermostats.The UH4 provides central switching of up to four zones as well asproviding an output for hot water, system boiler and pump.When used for under�oor heating, an option is available to usezone 4 for conventional radiator control. Up to six actuatorscan be connected to each zone.
230v 4 Zone Wiring Centre Part Ref: Heatmiser UH4
230v 8 Zone Wiring Centre Part Ref: Heatmiser UH8
The UH3 is designed to work with our four channel 230v time clock (TM4) and 230v Set back thermostat (DS-SB) but equally could be used with any 230v room thermostat. Up to eight zones can be controlled from the UH3. On board the UH3 are two heating time channels, each zone allows you to specify which time channel it should follow. Two additional time channel connections are provided for hot water control or other auxiliary devices. On demand from any
and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers. A simple slide switch makes zone 8 suitable for controlling a radiator zone.
valve and boiler. Up to four actuators can be connected to each zone.
UFHPUMP
TM4 DS-SB DS-SB DS-SBYES
NO
Heatmiser UH2 Heatmiser UH3
BOILER MAINSSUPPLY PRT/HW PRT PRT PRT
ZONE 1 ZONE 2 ZONE 3 ZONE 4
HOT WATERTHERMOSTAT HOT WATER
VALVE/PUMPHEATING
PUMP
PIPETHERMOSTAT
THERMOSTATSACTUATORS
UFHVALVE
SUPPLY TOACTUATORSOR VALVES
SUPPLY TOACTUATORSOR VALVES
SUPPLY TOACTUATORSOR VALVES
MAINSSUPPLY
TOBOILER
DIAL TYPETHERMOSTAT
DIAL TYPETHERMOSTAT
DIAL TYPETHERMOSTAT
TIME CLOCKTHERMOSTAT
VALVE ZONE 1 ZONE 2 ZONE 8
Heatmiser UH4 Heatmiser UH8
Our UH4 and UH8 wiring centres are designed to work with our 230v thermostats. The new UH4 is ideal for smaller systems, up to four zonesand the UH8 for eight zones.
Mains Thermostats Compatible Wiring Centres
The UH4 can be used in conjunction with our 230v mains thermostats.The UH4 provides central switching of up to four zones as well asproviding an output for hot water, system boiler and pump.When used for under�oor heating, an option is available to usezone 4 for conventional radiator control. Up to six actuatorscan be connected to each zone.
12v Network Thermostat Wiring Centre Part Ref: Heatmiser UH1
The UH1 is designed to be used in conjunction with our 12v network thermostats. The UH1 provides central switching and is therefore ideally
as well as providing an output for a hot water cylinder. On demand from any zone, a 230v output is provided to switch the relevant zone actuators,
boiler, making it compatible with almost all types of boilers. Up to six actuators can be connected to each zone. An option is provided to turn zone 8 into a
not enabled when there is a call for heat from zone 8.
Wireless 230v 8 Zone Wiring Centre Part Ref: Heatmiser UH8-RF
Central Wiring Switch BoxesOur central wiring switch boxes have been designed to simplify the wiring process. Using our wiring centres in your application means that the actuator, boiler and pump connections are wired from a single point.
Multi-zone wiring centres - Designed to make installation simple
UH1-W is not suitable for use in Australia and New Zealand.Heatmiser UH1 Heatmiser UH1-WHeatmiser UH1
The UH8-RF is designed to be used in conjunction with our compatiblewireless thermostats. The UH8-RF provides central switching and is thereforeideally situated next to the under�oor heating manifold. Eight zones can becontrolled as well as providing an output for hot water control. On demandfrom any zone, a 230v output is provided to switch the relevant zoneactuators, under�oor heating pump and valve. A volt free connection issupplied for the boiler, making it compatible with almost all types of boilers.Up to six actuators can be connected to each zone. An external aerial is availablefor use when the UH8-RF is being mounted in a metal cupboard or when thewireless signal is restricted. A software option in the thermostat allows you tocon�gure which zones are under�oor heating and which zones are radiators.
Heatmiser UH8-RFUH8-RF is not suitable for use in Australia.
12v Network Thermostat Wiring Centre Part Ref: Heatmiser UH1
The UH1 is designed to be used in conjunction with our 12v network thermostats. The UH1 provides central switching and is therefore ideally
as well as providing an output for a hot water cylinder. On demand from any zone, a 230v output is provided to switch the relevant zone actuators,
boiler, making it compatible with almost all types of boilers. Up to six actuators can be connected to each zone. An option is provided to turn zone 8 into a
not enabled when there is a call for heat from zone 8.
Wireless 230v 8 Zone Wiring Centre Part Ref: Heatmiser UH8-RF
Central Wiring Switch BoxesOur central wiring switch boxes have been designed to simplify the wiring process. Using our wiring centres in your application means that the actuator, boiler and pump connections are wired from a single point.
Multi-zone wiring centres - Designed to make installation simple
UH1-W is not suitable for use in Australia and New Zealand.Heatmiser UH1 Heatmiser UH1-WHeatmiser UH1
The UH8-RF is designed to be used in conjunction with our compatiblewireless thermostats. The UH8-RF provides central switching and is thereforeideally situated next to the under�oor heating manifold. Eight zones can becontrolled as well as providing an output for hot water control. On demandfrom any zone, a 230v output is provided to switch the relevant zoneactuators, under�oor heating pump and valve. A volt free connection issupplied for the boiler, making it compatible with almost all types of boilers.Up to six actuators can be connected to each zone. An external aerial is availablefor use when the UH8-RF is being mounted in a metal cupboard or when thewireless signal is restricted. A software option in the thermostat allows you tocon�gure which zones are under�oor heating and which zones are radiators.
Heatmiser UH8-RFUH8-RF is not suitable for use in Australia.
The UH8 is designed to work with our four channel 230v time clock (TM4) and 230v Set backthermostat (DS-SB) but equally could be used with any 230v room thermostat. Up to eightzones can be controlled from the UH8. On board the UH8 are two heating time channels, eachzone allows you to specify which time channel it should follow.
12v Network Thermostat Wiring Centre Part Ref: Heatmiser UH1
The UH1 is designed to be used in conjunction with our 12v network thermostats. The UH1 provides central switching and is therefore ideally
as well as providing an output for a hot water cylinder. On demand from any zone, a 230v output is provided to switch the relevant zone actuators,
boiler, making it compatible with almost all types of boilers. Up to six actuators can be connected to each zone. An option is provided to turn zone 8 into a
not enabled when there is a call for heat from zone 8.
Wireless 230v 8 Zone Wiring Centre Part Ref: Heatmiser UH8-RF
Central Wiring Switch BoxesOur central wiring switch boxes have been designed to simplify the wiring process. Using our wiring centres in your application means that the actuator, boiler and pump connections are wired from a single point.
Multi-zone wiring centres - Designed to make installation simple
UH1-W is not suitable for use in Australia and New Zealand.Heatmiser UH1 Heatmiser UH1-WHeatmiser UH1
The UH8-RF is designed to be used in conjunction with our compatiblewireless thermostats. The UH8-RF provides central switching and is thereforeideally situated next to the under�oor heating manifold. Eight zones can becontrolled as well as providing an output for hot water control. On demandfrom any zone, a 230v output is provided to switch the relevant zoneactuators, under�oor heating pump and valve. A volt free connection issupplied for the boiler, making it compatible with almost all types of boilers.Up to six actuators can be connected to each zone. An external aerial is availablefor use when the UH8-RF is being mounted in a metal cupboard or when thewireless signal is restricted. A software option in the thermostat allows you tocon�gure which zones are under�oor heating and which zones are radiators.
Heatmiser UH8-RFUH8-RF is not suitable for use in Australia.
12v Network Thermostat Wiring Centre Part Ref: Heatmiser UH1
The UH1 is designed to be used in conjunction with our 12v network thermostats. The UH1 provides central switching and is therefore ideally
as well as providing an output for a hot water cylinder. On demand from any zone, a 230v output is provided to switch the relevant zone actuators,
boiler, making it compatible with almost all types of boilers. Up to six actuators can be connected to each zone. An option is provided to turn zone 8 into a
not enabled when there is a call for heat from zone 8.
Wireless 230v 8 Zone Wiring Centre Part Ref: Heatmiser UH8-RF
Central Wiring Switch BoxesOur central wiring switch boxes have been designed to simplify the wiring process. Using our wiring centres in your application means that the actuator, boiler and pump connections are wired from a single point.
Multi-zone wiring centres - Designed to make installation simple
UH1-W is not suitable for use in Australia and New Zealand.Heatmiser UH1 Heatmiser UH1-WHeatmiser UH1
The UH8-RF is designed to be used in conjunction with our compatiblewireless thermostats. The UH8-RF provides central switching and is thereforeideally situated next to the under�oor heating manifold. Eight zones can becontrolled as well as providing an output for hot water control. On demandfrom any zone, a 230v output is provided to switch the relevant zoneactuators, under�oor heating pump and valve. A volt free connection issupplied for the boiler, making it compatible with almost all types of boilers.Up to six actuators can be connected to each zone. An external aerial is availablefor use when the UH8-RF is being mounted in a metal cupboard or when thewireless signal is restricted. A software option in the thermostat allows you tocon�gure which zones are under�oor heating and which zones are radiators.
Heatmiser UH8-RFUH8-RF is not suitable for use in Australia.
31Stylish Thermostats For Modern Living
Stylish Thermostats For Modern Living
Heatmiser UK Ltd8 & 9 Hurstwood Court, Mercer WayShadsworth Business Park, BlackburnLancashire. BB1 2QU, England
07/1
6
Tel: +44 (0)1254 669090Fax: +44 (0)1254 669091Email: [email protected]
Registered in England: 3747773
WEEE Registration Number: WEE/GF0052TQ
www.heatmiser.com
Facebook: facebook.com/thermostatsTwitter: @heatmiseruk