stud wall isolation strip | wallmatnetics sound isolation products, wallmat creates a resilient...

kineticsnoise.com/wallmat Wallmat Stud Wall Isolation Strip kineticsnoise.com [email protected] 1-800-959-1229 WALLMAT │ 7/20 Kinetics Noise Control, Inc. is continually upgrading the quality of our products. We reserve the right to make changes to this and all products without notice. MADE IN USA LARR 25997 ® Kinetics Noise Control’s Wallmat resilient partition isolation pad is a custom molded fiber glass board which resiliently decouples a sound-rated partition from non-isolated structure. Isolation is maintained with the use of KAI which isolates fasteners. Apply Wallmat continuously along the bottom and top plates of a stud wall wherever acoustical isolation is required to maintain a fully effective sound rated assembly. Flanking of sound through a floor/ceiling assembly can reduce STC (airborne noise) or IIC (impact noise) ratings 10 points or more versus non-flanked sound control construction. Frequently used in conjunction with other Ki- netics sound isolation products, Wallmat creates a resilient break to stop sound or vibration from flanking around a sound rated assembly. Neoprene bushing assemblies (KAI) used at each anchor point through the top and bottom plates of the stud wall ensure effective isolation. • Use Kinetics’ KIP Pad technology • Easy to install pre-cut strips • Field cut to length with a utility knife • Continuous resilient support of the partition • Engineered for a wide range of studwall loads • Use KAI isolation bushing assemblies for 100% resilient separation • Use for both top and bottom plate installation • UL Rated assemblies available

Upload: others

Post on 16-Jul-2020

1 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: Stud Wall Isolation Strip | Wallmatnetics sound isolation products, Wallmat creates a resilient break to stop sound or vibration from flanking around a sound rated assembly. Neoprene

kineticsnoise.com/wallmat

WallmatStud Wall Isolation Strip

[email protected]

1-800-959-1229

WALLMAT │ 7/20Kinetics Noise Control, Inc. is continually upgrading the quality of our products. We reserve the right to make changes to this and all products without notice.

MADE IN USALARR 25997

Kinetics Noise Control’s Wallmat resilient partition isolation pad is a custom molded fiber glass board which resiliently decouples a sound-rated partition from non-isolated structure. Isolation is maintained with the use of KAI which isolates fasteners. Apply Wallmat continuously along the bottom and top plates of a stud wall wherever acoustical isolation is required to maintain a fully effective sound rated assembly.

Flanking of sound through a floor/ceiling assembly can reduce STC (airborne noise) or IIC (impact noise) ratings 10 points or more versus non-flanked sound control construction. Frequently used in conjunction with other Ki-netics sound isolation products, Wallmat creates a resilient break to stop sound or vibration from flanking around a sound rated assembly. Neoprene bushing assemblies (KAI) used at each anchor point through the top and bottom plates of the stud wall ensure effective isolation.

• Use Kinetics’ KIP Pad technology• Easy to install pre-cut strips• Field cut to length with a utility knife• Continuous resilient support of the partition• Engineered for a wide range of studwall loads• Use KAI isolation bushing assemblies for 100% resilient separation • Use for both top and bottom plate installation • UL Rated assemblies available

Information Technology Solutions Phoneme Isolation Foundational...PHONEME ISOLATION is a strategy that ... first, middle, last sound). Phoneme isolation ... After hearing the teacher

Highly efficient isolation of waterborne sound by an air

Resilmount Sound Isolation Solutions are a division of ... · 2 Resilmount Sound Isolation Solutions are a division of Studco Building Systems, a leading manufacturer of innovative

Technology in Architecture Lecture 17 Noise Reduction by Absorption Sound Paths Sound Isolation Sound Privacy Structure Borne Sound Lecture 17 Noise Reduction

Effect of Internal Mass Isolation on the Radiated Sound ... · Effect of Internal Mass Isolation on the Radiated Sound ... sensitive components from underwater explosions. ... surface

SOUND ISOLATION SOLUTIONS - Resilmount US - Sound ... · applications for sound proofing walls and ceilings. Please contact us with your project and we will assist you in choosing

SOUND ISOLATION SOLUTIONS...Resilmount Sound Isolation Solutions are a division of Studco Building Systems, a leading manufacturer of innovative building materials. Resilmount offers

The Promoter and 5' Flanking Sequences Controlling Human B29

Total Sequence, Flanking Regions, and Transcripts … Sequence, Flanking Regions, and Transcripts of Bacteriophage ... The promoter-requiring vector, ... subcloned into M13 mp phage

Sound Isolation Products for Constructing Quiet Spaces

Phonological Awareness: First Sound Isolation...end of the sound. This activity may be modified to focus on the last sound (e.g., sun, /nnn/) or middle sound (e.g., hop, /ooo/), but

NBEMS/FLDIGI - QSL.netSound Card Interfaces and USB Sound Cards •Sound Card Interface connects from your computer sound card to your radio, provides RF isolation and automates the