stroller instructions - usa€¦ · looking at baby. canopy is not recommended to be removed. front...

stroller instructions

3

EN

ContentsSafety and Warnings 4–8Features 9Contents of the Box 10–11Opening the MIXX2™ Stroller 12–13Assembling the Canopy 12–13Assembling the Front Wheels 12–13Assembling the Rear Wheels and Storage Basket 14–15 Assembling the Armbar 14–15Securing Your Child 16–17Adjusting the Shoulder Harness Position 16–17Using the Canopy 18–19Front Swivel Locks 18–19Brake 18–19Handle Positions 18–19Adjusting the Recline 20–21Adjusting the Calf Support 20–21Reclined Carriage Position 20–21Reversing the Seat 22–23Folding the Stroller 22–23Accessories Nuna PIPA™ Infant Car Seat Adapters 24–27 Raincover 26–27Cleaning and Maintenance 28–29Warranty, Product Registration & Contact 30

4

EN Safety and Recommendations

Please take note of the following before using the Nuna MIXX2.

Safety is very important to us and you can be assured that our products comply with the relevant standards and that they have been tested by a number of independent testing panels and laboratories.

The MIXX2 Stroller is a patented product and complies with US safety standards and ASTM F833.

If you have any questions or comments regarding the MIXX2 Stroller, we will be glad to hear them through our web site:

In the USA: www.nuna.eu In Canada: www.nunababy.ca

5

EN

IMPORTANT! KEEP THESE INSTRUCTIONS

FOR FUTURE REFERENCE: READ CAREFULLY

6

EN

WARNINGFailure to follow these warnings and the instructions could result in serious injury or death.

NEVER leave child unattended. Always keep your child in view while in MIXX2 Stroller.

Avoid serious injury from falling or sliding out. Always use seat belt. After fastening buckles, adjust belts to get a snug fit around your child.

Child may slip into leg openings and strangle. Never use in reclined carriage position unless the calf support is raised to cover the front opening.

Please save instruction manual for future use.

Avoid finger entrapment: Use care when folding and unfolding the MIXX2 Stroller. Be certain the MIXX2 Stroller is fully erected and latched before allowing your child near the MIXX2 Stroller.

NEVER use MIXX2 Stroller on stairs or escalators. You may suddenly lose control of the MIXX2 Stroller or your child may fall out. Also, use extra care when going up or down a step or curb.

Strangulation Hazard: Do not place items with a string around your child’s neck, suspend strings from this product, or attach strings to toys.

MIXX2 Stroller is to be used only at walking speed. Product is not intended for use while jogging, skating, etc.

Use of the MIXX2 Stroller with a child weighing more than 50 lbs (22.7 kg) or 45 in. (114.3 cm) tall will cause excessive wear, and stress on the MIXX2 Stroller, and could create an unstable condition. Use the MIXX2 Stroller with only one child at a time.

7

EN


NEVER allow your MIXX2 Stroller to be used as a toy.

Discontinue using your MIXX2 Stroller should it become damaged or broken.

Overloading, incorrect folding, and the use of accessories e.g. child seats, bag hooks, rain covers, buggy boards, etc… other than those approved by Nuna may damage or make this MIXX2 Stroller unsafe.

NEVER allow children to stand on the footrest.

This stroller has been designed to use from birth. We recommend using lowest reclined position for newborn babies.

This stroller does not replace a cot or a bed. Should your child need to sleep, they should be placed in a crib or approved sleeping area based on your child’s requirements.

The parking brake should be engaged when the stroller is stopped and when placing and removing child.

DO NOT place any item on the canopy.

Only use Nuna accessories with your MIXX2 Stroller. Adding accessories such as purses, shopping bags, or parcels to the handle or canopy can cause the MIXX2 Stroller to be unstable.

DO NOT use storage basket as a child carrier.

8

EN


TO AVOID ANY DANGER OF SUFFOCATION, remove all plastic covers before using this item and destroy or keep away from babies and children!

ALWAYS check that the seat unit, and car seat attachment devices are correctly engaged before use.

To prevent a hazardous, unstable condition, do not place more than 10 lbs (4.5 kg) in the storage basket.

To prevent a hazardous, unstable condition, do not place more than 1 lbs (.45 kg) in the storage pocket on the back of the seat.

DO NOT use stroller seat as a booster seat.

DO NOT use stroller seat in a motor vehicle.

DO NOT carry stroller seat with child in it.

NEVER place the child with their head at the foot end of the stroller seat.

9

EN

Features

1

2

6

3

4

5

10

8

9

7

14

13

16

12

17

1 Stroller Frame2 Seat Pad3 Armbar4 Calf Support5 Front Wheel6 Canopy7 Handle Adjustment

Button

8 Shoulder Harness Pads 9 Buckle10 Rear Wheel11 Seat Release Button12 Handle13 Recline Handle14 Folding Button15 Storage Pocket 16 Storage Basket 17 Brake Lever

11

15

10

EN

Contents Of The Box

· Stroller Frame and Seat

· Front Wheel (2x)

· Rear Wheel (2x)

· Armbar

Tools : No tools required.

Check that you have all the parts for this product before using it. The assembly must be performed only by adults. Features vary by model.

WARNING Choking Hazard: Remove and immediately discard protective end caps from each wheel and wheel hub axle.

· Rain Cover

· Adapters

· Stroller Canopy Visor

· Brake Assembly

11

EN

If your MIXX2 stroller came with the MIXX2 Bassinet, you will also have the following parts in your MIXX2 stroller carton.

Refer to your MIXX2 Bassinet Instructions for features, assembly and use of the MIXX2 Bassinet.

· Bassinet

· Bassinet Mattress Pad

· Bassinet Canopy Visor

· Cover

12

EN

Opening the MIXX2

Before setting up the stroller, flatten the carton and place it on the floor.

1 - Open the storage latch as shown. 2 - Rotate the handle (1) to the rear of the stroller until it clicks into the open position.

Squeeze the handle (2) on the back of the seat and rotate the backrest to the upright position. CHECK that the stroller is completely latched open before continuing.

Assembling the Canopy3 - Line up the canopy visor zipper with the zipper on the inside of the front edge of canopy. Completely zip the canopy visor onto the front of canopy.

4 - Insert the canopy clips into the canopy mounts on the sides of the stroller until they click into place.

Assembling the Front Wheels5 - Push wheels onto the front leg tubes until they click into place. CHECK that wheels are securely attached by pulling down.

6 - To remove front wheels, press the button and pull wheel down.

13

EN

2

1

3

4

6

5

12

14

EN

Assembling the Rear Wheels and Storage Basket1 - MAKE SURE the brake lever is facing up before attaching to frame. Push brake assembly onto the rear leg tubes until it clicks into place. CHECK that brake assembly is securely attached by pulling on it.

2 - Line up the tab on the wheel axle with the groove in the brake assembly and push rear wheel onto the brake assembly until it clicks into place. Repeat with the other wheel on other side of brake assembly. CHECK that wheels are securely attached by pulling on them.

3 - To remove rear wheel, press the button (1) and pull wheel off (2) of brake assembly.

4 - Wrap the basket flap around the rear frame tube and fasten the 3 snaps.

Assembling the Armbar

WARNING Always secure the child with the harness. The armbar is not a restraint device.

5 - To attach armbar, insert the armbar into channels on both sides of the seating area.

6 - To remove, push the buttons on the outside of the stroller as shown.

7 - Fasten the inner snaps of the seat pad to the inside of the seating area as shown.

Stroller set up is complete.

15

EN

2

1 4

3 7

5

6

brake lever

tabgroove

1

2

16

EN

Securing Your Child

WARNING Avoid serious injury from falling or sliding out. Always use the seat belt.

1 - To unfasten the buckle, push on center button and remove the clips.

2 - To secure child, insert waist strap clips to harness strap clips then insert into the center buckle until it clicks.

3 - To tighten harness around your child for a snug fit, slide the adjusters on the straps. For a snug fit, the space between the child and the shoulder harness should be about the thickness of one hand.

Adjusting the Shoulder Harness Position4 - Accessing the shoulder harness varies by model. To adjust the position of the shoulder harness anchor, either open the zipper on the seat back, or unfasten the snaps located behind the storage pocket and lift up the flap. Turn the harness anchor to fit through the harness slot. Push retainer through to front of the seat.

5 - From front of seat, unfasten the snap at the top of the seat pad and pull the harness strap through the seat pad.

6 - Re-insert the harness strap through the desired set of harness slots in the seat pad and seat back that are closest to your child’s shoulders. Repeat with other strap.

CHECK to MAKE SURE that you have inserted the harness straps through the same set of harness slots for each harness strap.

Depending on model, either zip the zipper on the seat back, or close the flap and refasten the 4 snaps to the back of the seat.

17

EN

2

1

3

4

6

5

18

EN

Using the Canopy 1 - To open or close the canopy, push or pull the canopy to the front or back as shown.

2 - Lift the canopy window for added convenience when looking at baby.

Canopy is NOT recommended to be removed.

Front Swivel Locks3 - It is recommended to lock the swivel wheels when traveling on uneven surfaces.

To LOCK swivel wheel, squeeze and slide tab to rear of stroller. You may need to move wheel to get it to lock.

To UNLOCK swivel wheel, push tab towards front of stroller.

Brake

WARNING CHECK that the brakes are on by trying to push the stroller.

4 - To UNLOCK wheels, press down on front of brake lever.

5 - To LOCK wheels, press down on rear of brake lever.

Handle Positions - 36 - To adjust the height of the handle, squeeze the buttons on inside of the handle and pull the handle up or down. It may help to lock the brake while adjusting the handle.

19

EN

2

1

3

4

6

5

20

EN

Adjusting the Recline1 - There are 5 positions for the backrest. To recline the backrest, squeeze the adjustment handle, and pull seat down to desired position.

To raise the backrest, squeeze handle and rotate seat to upright position.

Adjusting the Calf Support The calf support has 3 positions.

2 - To raise the calf support, lift it up as shown.

3 - To lower the calf support, press in both buttons on the sides and rotate the calf support downward.

Reclined Carriage Position

WARNING • Child may slip into leg openings and strangle.

• NEVER use in reclined carriage position unless the calf support is raised to cover the front opening.

• DO NOT use enclosure with an older child that can push up on hands and knees or crawl out.

When using the stroller in fully reclined carriage position, follow these steps:

4 - Remove the arm bar.

5 - Fully recline seat, rotate footrest to upright position and unfasten the flaps underneath the calf support.

6 - Fasten the flaps to the snaps on the inside of the seating area on both sides of the seat.

21

EN

2

1

3

4

6

5

22

EN

Reversing the Seat The seat can be reversed to be parent-facing or forward-facing.

1 - Squeeze the seat release buttons and lift seat up.

2 - Turn the seat to be parent-facing, and then re-insert into the seat mounts until you hear them click into place.

CHECK to make sure seat is securely attached by pulling up on it.

Folding the StrollerBefore folding, push the canopy to rear of stroller.

4 - Squeeze the handle (1) on the back of the seat and rotate the backrest to the stored position (2).

5 - Pull up on the fold levers (3) and push the stroller forward to fold.

6 - The storage latch will engage automatically when the stroller is completely folded.

Zippered Storage Basket (certain models ONLY)3 - To access the storage basket, unfasten the zipper. as shown.

23

EN

2

1

3 6

5

3

4

1

2

24

EN

AccessoriesNuna PIPA Infant Car Seat Adapters

WARNING• Avoid serious injury from child falling out. Always secure

child in the infant car seat harness as explained in your infant car seat manual before attaching the infant car seat to the stroller.

• NEVER place infant car seat in the stroller seat.

• ONLY USE THE NUNA PIPA INFANT CAR SEAT with this stroller. NEVER use other manufacturer’s infant car seats with this stroller unless approved by the manufacturer.

• ONLY install your PIPA infant car seat REAR-FACING on the adapters.

When using your Nuna PIPA infant car seat, please follow these instructions:

REMOVE STROLLER SEAT FROM FRAME IF ATTACHED.

1 - To attach adapters, insert adapters onto mounts until they click into place. PULL UP on adapters to make sure they are securely attached.

2 - Line up the infant car seat handle hubs with the adapters as shown.

3 - Insert the infant car seat into the adapters until it CLICKS into place. PULL UP on the infant car seat to make sure that it is securely attached into the adapters.

25

EN

2

1

3

hub

26

EN

Raincover

WARNING• TO AVOID POSSIBLE SUFFOCATION, NEVER place

your child into the stroller with rain cover attached during hot weather.

• NEVER leave child unattended in this product.

• ALWAYS check that the rain cover has been cleaned and dried before folding.

• DO NOT fold the stroller after assembling the rain cover.

• MAKE SURE the canopy is completely open before attaching the rain cover.

6 - To assemble the stroller rain cover, place it over the stroller seat exactly as shown.

Infant Car Seat Adapters (cont.)4 - To remove car seat, press the buttons located on the sides of the Nuna infant car seat and lift the carseat off the adapters.

5 - To remove adapters, pull the release button on adapter and lift the adapter off the stroller frame. Repeat on other adapter.

If you have any problems using the infant car seat, please refer to the infant car seat instruction manual.

27

EN

5

4

6

28

EN

Cleaning and Maintenance

Your MIXX2 Stroller is a valuable piece of equipment and deserves careful handling.

You can clean the frame, the plastic parts, and the fabric with a damp cloth, but don’t use abrasives or bleach.

• Fabric is machine washable on warm setting. 105 degrees Fahrenheit (40 degree Celsius)

• Drip dry. DO NOT BLEACH. DO NOT IRON.

• Do not use silicone lubricants, as they will attract dirt and grime.

• Continued and extended exposure to sunlight can change the color of many materials.

• Do not store your MIXX2 Stroller in a damp place.

• Always allow the fabric to dry naturally away from direct heat.

• For reasons of safety, only use original Nuna parts.

• Clean the wheels regularly with water and remove the dirt.

• Lubricate moving parts with a light, non-toxic oil. Be careful not to apply light oil to the wheel bearings.

• To ensure the long-lasting use of your MIXX2 Stroller, wipe it off with a soft, absorbent cloth after using it in rainy weather.

• It is normal for fabric to discolor from sunlight and to show wear and tear after a long period of use, even when used normally.

29

EN

Cleaning and Maintenance (cont.)

• Discontinue use if any parts are torn, broken, or missing.

• To clean the armbar or handle, wipe clean with damp cloth and then allow to air dry before storing.

• DO NOT clean your product with strong cleaners or solvent as it may damage the material.

• DO NOT expose your product to organic solvents like alcohol.

30

EN

Warranty We have purposely designed our high-quality products so that they can grow with both your child and your family. Because we stand by our product, our gear is covered by a custom warranty per product, starting from the day it was purchased. Please have the proof of purchase, model number and serial number available when you contact us.

For warranty information please visit: http://www.nuna.eu/warranty

Product RegistrationAll products include a serial label which lists the product model number and serial number. This label is located on the underside of the stroller footrest. Before contacting customer service, please have these numbers available for reference.

To register your product please visit: https://www.nuna.eu/register-gear

Contact

For replacement parts, service, or additional warranty questions, please contact our customer service departments.

In the USA: [email protected] www.nuna.eu 1.855.NUNA.USA (1.855.686.2872)

In Canada: [email protected] 1.800.667.4111

IM-0

207D

In Canada: Nuna Canada 4500 Thimens Blvd, Suite 100 St-Laurent, QC, H4R 2P2 T: 514.344.3045 / F: 514.344.3296 1.800.667.4111 [email protected]

United States: Nuna Baby Essentials Inc. 70 Thousand Oaks Blvd. Morgantown, PA 19543 1.855.NUNA.USA (1.855.686.2872) nuna.eu

bassinet instructions

3

EN

ContentsSafety and Warnings 4–9Features 10Contents of the Box 11Assembling the Bassinet Support Mounts 12–13Assembling the Attachment Mounts 14–15Using the Canopy 14–15Removing the Canopy 16–17Using the Dream Drape™ 16–17 Using the Canopy Visor 18–19Inserting the Mattress Pad 18–19Using the Bassinet Cover 20–21Using the Bassinet on the MIXX™ series Stroller in Carry Cot Mode 20–21Removing Bassinet from the MIXX series Stroller in Carry Cot Mode 20–21Cleaning and Maintenance 22Warranty, Product Registration & Contact 23

4

EN

Safety and RecommendationsPlease take note of the following before using the Nuna MIXX series Bassinet.

Safety is very important to us and you can be assured that our products comply with the relevant standards and that they have been tested by a number of independent testing panels and laboratories.

The MIXX series Bassinet is a patented product and complies with the U.S. Safety Standards.

This product complies with the requirements of ASTM F2050 (US).

This product complies with the requirements ASTM F2194 (US).

When used on the MIXX series Stroller, this product only functions as a Carry Cot.

If you have any questions or comments regarding the MIXX series Bassinet, we will be glad to hear them through our web site:

In the USA: www.nuna.eu In Canada: www.nunababy.ca

IMPORTANT! KEEP THESE INSTRUCTIONS FOR FUTURE

REFERENCE! READ CAREFULLY.

5

EN

IMPORTANT! KEEP THESE INSTRUCTIONS

FOR FUTURE REFERENCE: READ CAREFULLY

BEFORE ASSEMBLY AND USE OF THE BASSINET.

6

EN


For use in Bassinet ModeTHIS BASSINET is suitable for use with children who weigh up to 20 lbs (9 kg) (birth–6 months) and whose height is 27 in. (68 cm) or less.

FALL HAZARD—To help prevent falls, do not use this product when the infant begins to push up on hands and knees or has reached 20 lbs (9 kg), whichever comes first.

SUFFOCATION HAZARD—

Infants have suffocated:

• In gaps between extra padding and side of the bassinet, and

• On soft bedding.

USE ONLY the pad provided by manufacturer. NEVER add a pillow, comforter, or another mattress for padding.

To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless otherwise advised by your physician.

DO NOT use a sheet or any other bedding products not provided by Nuna with your bassinet.

STRANGULATION HAZARD—Strings can cause strangulation! Do not place items with a string around a child’s neck, such as hood strings or pacifier cords. Do not suspend strings over a bassinet or cradle or attach strings to toys.

FALL HAZARD—Always check that the bassinet is securely locked onto the MIXX series Stroller by pulling up on it.

7

EN


When using the Bassinet on the MIXX series stroller in Carry Cot ModeTHIS BASSINET when used on the MIXX series stroller in Carry Cot mode is suitable for use with children who weigh up to 20 lbs (9 kg) (birth–6 months) and whose weight is 27 in. (68 cm) or less.

WARNING—Never leave child unattended.

SUFFOCATION HAZARD—Carry Cot can roll over on soft surfaces and suffocate child. NEVER place Carry Cot on beds, sofas, or other soft surfaces.

FALL HAZARD—Child’s activity can move Carry Cot. NEVER place Carry Cot on counter tops, tables, or any other elevated surfaces.

NEVER use this Carry Cot as a means to transport an infant in a motor vehicle.

WARNING—A child’s safety is your responsibility.

WARNING—Ensure that all the locking devices are engaged before use.

WARNING—Any load attached to the handle affects the stability of the stroller/pram/pushchair.

WARNING—To avoid any danger of suffocation, remove all plastic covers before using this item and destroy or keep away from babies and children!

ALWAYS set the parking brake on the MIXX series Stroller when you stop.

8

EN

When using the Bassinet on the MIXX series stroller in Carry Cot Mode (cont.) NEVER leave a child in the Carry Cot when ascending or descending stairs or escalators, or when traveling on other forms of transport.

DO NOT carry additional children, goods, or accessories in or on this Carry Cot except as permitted in these instructions. They may cause the Carry Cot to become unstable.

NEGOTIATE curbs and rough ground carefully. Repeated impact will cause damage to the Carry Cot.

CHECK that the stroller body attachment devices are correctly engaged before use.

9

EN


General WarningsKEEP small parts away from children as they pose a choking hazard.

DO NOT leave the MIXX series Bassinet exposed in the vicinity of a strong source of heat i.e. a radiator or open fire.

USE original Nuna parts and accessories only.

DO NOT store your MIXX series Bassinet in a damp place.

ALWAYS allow the fabric to dry naturally away from direct heat.

WARNING—To avoid injury ensure that your child is kept away when unfolding and folding this product.

The handles and the bottom should be inspected regularly for signs of damage and wear.

DO NOT place any item on the canopy.

WARNING—Do not let your child play with this product.

DO NOT use the MIXX series Bassinet if it is damaged or broken.

DO NOT place more than 3 lbs. ( 1.3 kg) in the Accessory Pocket.

10

EN

Features1 Canopy Visor 2 Cover 3 Bassinet 4 Support Mount 5 Accessory Pocket 6 Attachment Mount 7 Release Button

8 Canopy Fold Button 9 Canopy 10 Handle 11 Mattress

1

2

3

4

65

11

7

8

9

10

11

EN

Contents of the Box

Tools : No tools required.

Check that you have all the parts for this product before using it. The assembly must be performed only by adults.

· Bassinet

· Bassinet Mattress Pad

· Bassinet Canopy Visor

· Cover

12

EN

Assembling the Bassinet Support Mounts

1 - Remove the mattress pad and rotate the Attachment Mounts out from the center of the bassinet.

2 - Unfasten the hook and loop strips and lift the fabric away from inside the bassinet to access the two Support Mounts, which are located under the fabric at the canopy and foot ends of the bassinet.

3 - Holding the top rail of the foot end, push the Support Mount back to raise the end of the bassinet.

4 - Rotate the Support Mount down towards the latch at the bottom of the bassinet as shown.

5 - Push the Support Mount into the latch on the bottom of bassinet until it clicks into place. Repeat on the canopy end of the bassinet.

6 - To fold, push button on the latch and pull Support Mount out.

13

EN

2

1

3

4

5

6

14

EN

Assembling the Attachment Mounts1 - Make sure the Attachment Mounts are outside of the bassinet.

2 - Rotate the Attachment Mounts down the side of the bassinet on both sides until they click into the latch as shown.

Make sure you hear a “click”.

3 - To disassemble the bassinet, push the button on the latch on the underside of the bassinet and pull the Attachmment Mount out.

Using the Canopy4 - To open the Canopy, rotate the Canopy up.

5 - The handle will stop in the convenience position for accessing child. To continue to open the canopy further, push the buttons on both sides of the handle and pull canopy towards the foot end of the bassinet until it clicks into the fully extended position.

Be sure handle is locked in the fully extended position before lifting the bassinet by the handle.

6 - To close the Canopy, press the Canopy Folding Buttons simultaneously on both sides, and rotate down.

15

EN

2

1 4

3 6

5 convenienceposition

fully- extended position

16

EN

Removing the Canopy 1 - To remove, unfasten the canopy zipper located on the bottom panel of the canopy as shown.

2 - Unfasten the zipper located on the inside of the canopy handle.

3 - Remove canopy from the bassinet.

Using the Dream Drape™

4 - Pull out the dream drape from underneath the flap under the canopy as shown.

5 - Attach the magnets on the corners of the dream drape to the side rails of the bassinet.

6 - Lift up the panel on the rear of the canopy for more ventilation.

To store, tuck the dream drape back under the flap underneath the canopy.

17

EN

2

1

3

4

6

5

18

EN

Using the Canopy Visor1 - To attach the Canopy Visor, zip it to the underside of the canopy on both sides of handle.

Canopy flips in or out for added sun protection.

To remove the Canopy Visor, unzip it from the Canopy on both sides of the handle.

Inserting the Mattress Pad

WARNINGTo avoid serious injury, always use the Mattress Pad when using the bassinet.

2 - CHECK to make sure the bottom of the bassinet fabric is securely fastened.

3 - Insert the Mattress Pad into the bassinet so that the opening seam on the Mattress Pad is on the bottom.

4 - Mattress Pad should be completely flush with the bottom of the bassinet.

5 - To wash the mattress cover, unfasten the hook and loop strips on the bottom of the Mattress Pad and remove it. Machine wash. Line dry only. DO NOT wash the Mattress Pad.

19

EN

2

1

3

4

5

20

EN

Using the Bassinet Cover1 - Place the Bassinet Cover on top of the bassinet so the closed section is on the foot end.

2 - Fasten the Bassinet Cover with the magnets to the sides of the bassinet and at the foot end.

Using the Bassinet on the MIXX series Stroller in Carry Cot Mode

WARNING• The MIXX series Bassinet, when used on the MIXX series stroller, can only be used as a Carry Cot.• Never leave child unattended.• Check to be sure Carry Cot is securely attached by pulling up on the Carry Cot.• The Carry Cot can only be used with the MIXX series Stroller.• Do not fold the stroller when the Carry Cot is attached.3 - Line up the mounts on the side of the Carry Cot with the stroller mounts as shown. 4 - Attach to the MIXX series Stroller mounts by inserting the Attachment Mounts onto both sides of the stroller frame until the Carry Cot CLICKS into place. CHECK to make sure it is securely attached by pulling up on it. The Carry Cot can attach in a rear-facing or forward-facing mode when on the stroller frame.

Removing Bassinet from the MIXX series Stroller in the Carry Cot Mode5 - Press the Carry Cot Release Buttons on both sides while lifting the Carry Cot up.

21

EN

2

1

3

4

5

22

EN

Cleaning and Maintenance

Your MIXX series Bassinet is a valuable piece of equipment and deserves careful handling.

You can clean the frame, the plastic parts, and the fabric with a damp cloth, but don’t use abrasives or bleach.

• Please handle your MIXX series Bassinet with care.

• Do not use abrasives or bleach.

• The Mattress Cover and Bassinet Cover can be removed and machine-washed. Line dry only.

• Do not wash the Mattress Pad.

• To ensure the long-lasting use of your bassinet, wipe it dry with a soft, absorbent cloth after using in the rain.

• Continued and extended exposure to sunlight can change the color of many materials.

• Never modify any part of the bassinet. Only use parts originally provided by Nuna.

• Regularly check if any parts are torn, broken, or missing and that everything functions properly. Stop using the bassinet if damaged or missing parts.

• Do not attempt to disassemble the bassinet further than these instructions allow.

23

EN

Warranty We have purposely designed our high-quality products so that they can grow with both your child and your family. Because we stand by our product, our gear is covered by a custom warranty per product, starting from the day it was purchased. Please have the proof of purchase, model number and serial number available when you contact us.

For warranty information please visit: http://www.nuna.eu/warranty

Product RegistrationAll products include a serial label which lists the product model number and serial number. This label is located on the footend of the bassinet under the mattress pad. Before contacting customer service, please have these numbers available for reference.

To register your product please visit: https://www.nuna.eu/register-gear

Contact

For replacement parts, service, or additional warranty questions, please contact our customer service departments.

In the USA: [email protected] www.nuna.eu 1.855.NUNA.USA (1.855.686.2872)

In Canada: [email protected] 1.800.667.4111

IM-0

208D

In Canada: Nuna Canada 4500 Thimens Blvd, Suite 100 St-Laurent, QC, H4R 2P2 T: 514.344.3045 / F: 514.344.3296 1.800.667.4111 [email protected]


footmuff instructions

Installing Footmuff

1 Unzip footmuff and place footmuff in the seat of the stroller. 2 Thread staps through the corresponding openings.

Footmuff Use

1 The Nuna footmuff should not cover the child’s face. Partially unzip both sides of the footmuff and fold down; secure with magnets as shown.

Instructions for Safe Use • IMPORTANT: Always use the safety harness. • Never leave your child unattended in the stroller for any reason.• Always remove the footmuff before attempting to fold your stroller.

Instructions for Fabric Care • Handwash only.• Tumble dry on low setting.

Keep this document in a safe place for future reference.

IM-0

227C


stroller instructions - usa€¦ · looking at baby. canopy is not recommended to be removed. front...

Documents