275 WattPOLYCRYSTALLINE SOLAR MODULE

Features

www.suntech-power.com IEC-STP-Wfw-NO2.02-Rev 2017©Copyright 2017 Suntech Power

16.8%

3800 Pa5400 Pa

Extended wind and snow load testsModule certified to withstand extreme wind (3800 Pascal) and snow loads (5400 Pascal) *

High module conversion efficiencyModule efficiency up to 16.8% achieved through advanced cell technology and manufacturing capabilities

2%

Suntech current sorting processSystem output maximized by reducing mismatch losses up to 2% with modules sorted & packaged by amperage

PIDResistant

High PID resistant Advanced cell technology and qualified materials lead to high resistance to PID

STP275 - 20/WfwSTP270 - 20/WfwSTP265 - 20/Wfw

Withstanding harsh environmentReliable quality leads to a better sustainability even in harsh environment like desert, farm and coastline

0/+5W

Positive tolerancePositive tolerance of up to 5 W delivers higher output reliablity

IP68 Rated Junction Box

The Suntech IP68 rated junction box ensures an outstanding waterproof level, supports installations in all orientations and reduces stress on the cables. High reliable performance, low resistance connectors ensure maximum output for the highest energy production.

Industry-leading Warranty based on nominal power

The unique cell design leads reduction in electrodes resistance, shading area and raise in conversion efficiency. Residual stress distribution can be more even, reducing the micro-cracks risks.

•97.5% in the first year, thereafter, for years two (2) through twenty-five (25), 0.7% maximum decrease from MODULE’s nominal power output per year, ending with the 80.7% in the 25th year after the defined WARRANTY STARTING DATE.****

•12-year product warranty•25-year linear performance

warranty

Industry leading linear warranty

War

rant

ed P

ower

Out

put

1 10 25

100%

10

97.5%

80%25

90%

80.7%

•World-class manufacturer of crystalline silicon photovoltaic modules•Unrivaled manufacturing capacity and world-class technology•Rigorous quality control meeting the highest international standards:

ISO 9001: 2008, ISO 14001: 2004 and ISO17025: 2005•Regular independently checked production process from international

accredited institute/company•Tested for harsh environments (salt mist, ammonia corrosion and sand

blowing testing: IEC 61701, IEC 62716, DIN EN 60068-2-68)***•Long-term reliability tests•2 x 100% EL inspection ensuring defect-free modules

Trust Suntech to Deliver Reliable Performance Over Time Special 5 busbar design

* Please refer to Suntech Standard Module Installation Manual for details. **WEEE only for EU market. *** Please refer to Suntech Product Near-coast Installation Manual for details. **** Please refer to Suntech Product Warranty for details.

Certifications and standards: IEC 61215, IEC 61730, conformity to CE

**

IEC-STP-Vem-NO1.01-Rev 2014E-mail: sales@suntech-power.com

Current-Voltage & Power-Voltage Curve (275-20)

Dealer information

Mechanical CharacteristicsSolar Cell Polycrystalline silicon 6 inches

No. of Cells 60 (6 × 10)

Dimensions 1650 × 992 × 35mm (64.96 × 39.1 × 1.4 inches)

Weight 18.3 kgs (40.3 lbs.)

Front Glass 3.2 mm (0.13 inches) tempered glass

Frame Anodized aluminium alloy

Junction Box IP68 rated (3 bypass diodes)

Output Cables TUV (2Pfg1169:2007)

4.0 mm2 (0.006 inches2), symmetrical lengths (-) 1000mm (39.4 inches) and (+) 1000 mm (39.4 inches)

Connectors MC4 compatible

Packing ConfigurationContainer 20’ GP 40’ HC

Pieces per pallet 30 30

Pallets per container 6 28

Pieces per container 180 840

www.suntech-power.com IEC-STP-Wfw-NO2.02-Rev 2017

1000 W/m2 800 W/m2 600 W/m2 400 W/m2 200 W/m2

Information on how to install and operate this product is available in the installation instruction. All values indicated in this data sheet are subject to change without prior announcement. The specifications may vary slightly. All specifications are in accordance with standard EN 50380. Color differences of the modules relative to the figures as well as discolorations of/in the modules which do not impair their proper functioning are possible and do not constitute a deviation from the specification.

Electrical CharacteristicsSTC STP275-20/

WfwSTP270-20/

WfwSTP265-20/

Wfw

Maximum Power at STC (Pmax) 275 W 270 W 265 W

Optimum Operating Voltage (Vmp) 31.2 V 31.1 V 31.0 V

Optimum Operating Current (Imp) 8.82 A 8.69 A 8.56 A

Open Circuit Voltage (Voc) 38.1 V 37.9 V 37.8 V

Short Circuit Current (Isc) 9.27 A 9.15 A 9.02 A

Module Efficiency 16.8% 16.5% 16.2%

Operating Module Temperature -40 °C to +85 °C

Maximum System Voltage 1000 V DC (IEC)

Maximum Series Fuse Rating 20 A

Power Tolerance 0/+5 WSTC: lrradiance 1000 W/m2, module temperature 25 °C, AM=1.5;Best in Class AAA solar simulator (IEC 60904-9) used, power measurement uncertainty is within +/- 3%

NOCT STP275-20/Wfw

STP270-20/Wfw

STP265-20/Wfw

Maximum Power at NOCT (Pmax) 200.6 W 198 W 194 W

Optimum Operating Voltage (Vmp) 28.5 V 28.4 V 28.3V

Optimum Operating Current (Imp) 7.05 A 6.97 A 6.86 A

Open Circuit Voltage (Voc) 34.8 V 34.9 V 34.8 V

Short Circuit Current (Isc) 7.5 A 7.42 A 7.32 ANOCT: Irradiance 800 W/m2, ambient temperature 20 °C, AM=1.5, wind speed 1 m/s;Best in Class AAA solar simulator (IEC 60904-9) used, power measurement uncertainty is within +/- 3%

STP275- 20/WfwSTP270 - 20/WfwSTP265 - 20/Wfw

Temperature CharacteristicsNominal Operating Cell Temperature (NOCT) 45±2°C

Temperature Coefficient of Pmax -0.41 %/°C

Temperature Coefficient of Voc -0.33 %/°C

Temperature Coefficient of Isc 0.067 %/°C

All technical data at standard test conditionAM=1.5 E=1000W/m 2 Tc=25 ℃For field connections, use minimum No. 12 AWG copperwires insulated for a minimum of 90 ℃Fire class rating: Fire Class C ,

Model NumberRated Maximum PowerOutput ToleranceCurrent at PmaxVoltage at PmaxShort-Circuit CurrentOpen-Circuit VoltageNominal Operating Cell Temp.WeightDimensionMaximum System VoltageMaximum Series Fuse RatingCell Technology

abcdefgh

Add: No.16 Xinhua Road, New District Wuxi, China 214028Wuxi.Suntech Power Co.Ltd

Made in China

Hazardous electricity can shock, burnor cause death. Do not touch terminals.

ij1000Vlm

Application Class A

Conforms toUL 1703

V.xx

(Pmax

(Imp

(V mp

(Isc

(V oc

(T

)

)))))

Customer Service Hot Line: +86 400 8888 009 Fax:+86 510 8534 3321

>PC<>PC<

0

50

100

150

200

250

300

0

2

4

6

8

10

12

0 5 10 15 20 25 30 35 40

Po

we

r(W

)

Cu

rre

nt(

A)

Voltage(V)