storage systems - sealants and silicones, shelving … 6 - easyup 7000... · easyup 7000 shelving...
TRANSCRIPT
NORTH AMERICAN STEEL
EASY-UP 7000 SHELVING SYSTEMS
The i d e a l o p en - t y p e l o n g s p an s h e l v i n g s y s t emFou r b a s i c i n t e r - l o ck i n g c omponen t s o n l y
NORTH AMERICAN STEEL
NORTH AMERICAN STORAGE
300 Hopkins Street, Whitby, Ontario Canada L1N 2B9Phone: (905) 668-3300Toll Free: (800) 735-4153 Email: [email protected]: (905) 668-5477 Web: www.naseco.ca
2103 - 7th Street, Nisku, Alberta Canada T9E 7Y3Phone: (780) 955-2444Toll Free: (800) 241-8968 Email: [email protected]: (780) 955-3463 Web: www.naseco.ca
With 50 Years
Manufacturing Experience
NORTH AMERICAN STEEL
is the leading name for
Innovative Storage Ideas
AUTHORIZED DISTRIBUTOR:
Pa l l e t Rack ing Sys tems
Kwikerec t S tee l She l v ing
C lo thes Lockers
E ASYU P 7000 S H E LV I N G SYSTE M SSTO R AG E SYSTE M S
MEZZANINE SYSTEMS
EASYUP 7000 can easily be extended to provide multiple storage levels
where ceiling heights permit. Economical method to add storage without
adding floor space by either: extending your existing (or new) shelving by
installing a Catwalk System to reach the upper level; or placing complete
Mezzanine floor over your existing (or new) shelving, using the upper floor
for storage. Stairs, and rail, drop zones, safety gates and conveyors are
available for maximum efficiency.
AUTOMOTIVE STORAGE
EASYUP 7000 specialty units have been designed for automotive storage:
Tire Racks: 15”d x 72”w units for tire storage.
Muffler Racks: Open shelf unit with wire mesh top shelf for
muffler storage.
Fender & Trim Racks: Open unit with back supports for vertical storage.
Bulk Storage: Accessible from all sides to depth of 48” x 96”.
Back to Back units allow storage up to 48” x 96”.
Small Parts: Plastic, cardboard or steel bins, plus full extension
drawer inserts are available.
Display & Convenience: Add peg board to end of rows for hanging belts,
gaskets etc.
MAXIMUM EVENLY DISTRIBUTED STATIC LOAD PER PAIR OF BEAMS
BEAM STYLE 36 in. 48 in. 60 in. 72 in. 96 in.
LD V-Shaped Beam 500 400 250MD Medium Duty Beam 1200 950 700 480with tie-bar and shelf support 1800 1500 1200 900HD Heavy Duty Beam 2000 1400 1000 800 450with tie-bar and shelf support 1900 1700 1500 900*
Calculation based on: 1 Tie-Bar and 1 Shelf-Support for 36, 48, & 60” beams. 2 Tie-Bars and 2 Shelf-Support for 66, 72, & 96” Beams.Safety Factor: 1.66
HIGH RISE SYSTEMS
EASYUP 7000 heavy duty double post end frames, rigid cross members and
double hooking beams provide storage units up to 40 feet in height.
Cross aisle supports are provided to prevent tipping and add rigidity.
Open access to all shelves allow easy picking by entry guided wire or rail
picker trucks.
NORTH AMERICAN STEEL
EASY-UP 7000 SHELVING SYSTEMS
The i d e a l o p en - t y p e l o n g s p an s h e l v i n g s y s t emFou r b a s i c i n t e r - l o ck i n g c omponen t s o n l y
NORTH AMERICAN STEEL
NORTH AMERICAN STORAGE
300 Hopkins Street, Whitby, Ontario Canada L1N 2B9Phone: (905) 668-3300Toll Free: (800) 735-4153 Email: [email protected]: (905) 668-5477 Web: www.naseco.ca
2103 - 7th Street, Nisku, Alberta Canada T9E 7Y3Phone: (780) 955-2444Toll Free: (800) 241-8968 Email: [email protected]: (780) 955-3463 Web: www.naseco.ca
With 50 Years
Manufacturing Experience
NORTH AMERICAN STEEL
is the leading name for
Innovative Storage Ideas
AUTHORIZED DISTRIBUTOR:
Pa l l e t Rack ing Sys tems
Kwikerec t S tee l She l v ing
C lo thes Lockers
E ASYU P 7000 S H E LV I N G SYSTE M SSTO R AG E SYSTE M S
MEZZANINE SYSTEMS
EASYUP 7000 can easily be extended to provide multiple storage levels
where ceiling heights permit. Economical method to add storage without
adding floor space by either: extending your existing (or new) shelving by
installing a Catwalk System to reach the upper level; or placing complete
Mezzanine floor over your existing (or new) shelving, using the upper floor
for storage. Stairs, and rail, drop zones, safety gates and conveyors are
available for maximum efficiency.
AUTOMOTIVE STORAGE
EASYUP 7000 specialty units have been designed for automotive storage:
Tire Racks: 15”d x 72”w units for tire storage.
Muffler Racks: Open shelf unit with wire mesh top shelf for
muffler storage.
Fender & Trim Racks: Open unit with back supports for vertical storage.
Bulk Storage: Accessible from all sides to depth of 48” x 96”.
Back to Back units allow storage up to 48” x 96”.
Small Parts: Plastic, cardboard or steel bins, plus full extension
drawer inserts are available.
Display & Convenience: Add peg board to end of rows for hanging belts,
gaskets etc.
MAXIMUM EVENLY DISTRIBUTED STATIC LOAD PER PAIR OF BEAMS
BEAM STYLE 36 in. 48 in. 60 in. 72 in. 96 in.
LD V-Shaped Beam 500 400 250MD Medium Duty Beam 1200 950 700 480with tie-bar and shelf support 1800 1500 1200 900HD Heavy Duty Beam 2000 1400 1000 800 450with tie-bar and shelf support 1900 1700 1500 900*
Calculation based on: 1 Tie-Bar and 1 Shelf-Support for 36, 48, & 60” beams. 2 Tie-Bars and 2 Shelf-Support for 66, 72, & 96” Beams.Safety Factor: 1.66
HIGH RISE SYSTEMS
EASYUP 7000 heavy duty double post end frames, rigid cross members and
double hooking beams provide storage units up to 40 feet in height.
Cross aisle supports are provided to prevent tipping and add rigidity.
Open access to all shelves allow easy picking by entry guided wire or rail
picker trucks.
EASYU P 7000 S H E LV I N G SYSTE M SSTO R AG E SYSTE M S
EASYU P 7000 S H E LV I N G SYSTE M SC O M PO N E NTS
EASYU P 7000 S H E LV I N G SYSTE M SC O M PO N E NTS
ADVAN C E D FEATU R E S
LONG SPAN SHELVING (BULK STORAGE)
EASYUP 7000 is the ideal universal shelving system designed for hand loading of
large size or heavy merchandise. It features open accessibility from all sides as no
cross bracing is required.
Shelf Size Range: From12” x 36” to 48” x 96”
Capability of 96” x 96” with back to back units.
Beam Variety: Selection from the most economical beam to 2000 lbs. load
capacity per level.
FOUR MAIN COMPONENTS
Common Posts:
Are 12 gauge, one piece impact resistant and squared for strength with rounded
corners for safety. Posts are slotted on 2” centres for Beams and have holes on 6”
centres for back to back bolting, wall anchoring or for aid in Beam positioning. For
High-Rise Systems or 3 Tier Mezzanines, Posts can be doubled up at lower levels for
increased load capacities.
Cross Members:
Are “Z” shaped, with a patented Safety Locking Tab which can be unlocked again to
interchange sizes and adjust depths.
Beams:
Double-Hook Beams on top and bottom provide complete lateral rigidity without the
interference and cost of braces. Three types of Beams are available from single to
double hooking heavy duty Beams, to match shelf load requirements with minimum
Beam size.
Shelves:
Are re-inforceable with Shelf Support and Tie Bars.
Particle Board Shelves offer strength with economy.
Wire Mesh Shelves allow passage of air, light and water and will not retain dust
or debris.
TIE BARS: TB 18, 24, 30, 32, 36, 48
Clip into the bottom lip of a pair of
beams, preventing beams
from “bowing out”
under load.
SHELF SUPPORTS FOR MD BEAMS:
MSS 18, 24, 30, 32, 36, 48
Designed to support shelves at any
point locking into upper lip of
beam.
SHELF SUPPORTS FOR HD BEAMS:
HSS 24, 30, 36, 48
Shelf Supports lock into the upper
lip of a pair of beams.
CROSS MEMBERS:
Cross Member and posts form a rigid end
frame. Cross Members are
designed with a patented
locking tab to be
turned into the post
for safety and rigidity.
SHELF BARS: SB 18, 24, 30, 32, 36, 48
Shelf Bars rest on upper edge of beam,
retained between posts
and shelves.
POSTS:
Slots on 2” centres, covering 3
sides. Half slot on top for flush
mounted top shelf.
POST SPLICERS:
Steel splice (2 per joint) are
used to extend height of
post. Splicers are designed
to force-fit into the hollow
sections of the post.
STEEL SHELVES (full size, painted):
SH All standard sizes up to 24” x 48”
Front and back edges are channel formed
and drop over front & back beams
providing extra strength (beam plus
shelf capacity).
PARTICLE BOARD SHELVES:
5/8” Industrial Grade 45 lb. test particle
board is an ideal economical storage shelf
in conjunction with EASYUP beams. In
layouts all shelves are actual size.
P - Common Post
CM - Cross Member
LD - Light Duty Beam
MD - Medium Duty Beam
HD - Heavy Duty Beam
MSS - Shelf Support for MD Beam
HSS - Shelf Support for HD Beam
TB - Tie Bar
SB - Shelf Bar
SH - Steel Shelf
WMS - Wire Mesh Shelf
PB - Particle Board Shelf
DI - Drawer Insert
THE NEW GENERATION OF SHELVING
• Complete boltless and clipless for quickest
assembly.
• Accessibility from all sides since no “X” braces
required.
• Common Posts reduce cost for
Add-On Units.
• Shelves can be easily re-adjusted after being
installed.
• Back to back installation without gap and tight
against a wall.
• Post and Cross Members lock together in both
planes to form a rigid end frame with high load
capacities.
• Knocked down type end frames allow for height,
capacity and depth adjustability at any time.
• Diverse accessories allow for expansion without
using more floor space.
• EASYUP is shipped knocked down to reducing
freight costs.
ARCHIVE STORAGE
EASYUP 7000 Shelving Systems provide most economical storage of Banker Boxes (letter and legal size)
Tapes, X-Rays, and Medical Records. Beam sizes and capacity have been specifically developed for
maximum storage utilization.
Application: Store boxes single height and depth.
Further Space Savings: Store boxes double high and double deep.
High Rise: Heavy Duty end frames allow for Mezzanines and High Rise
Picker Systems.
Access: From all sides and back to back units.
STANDARD BANKER BOX UNITS
SHELF SIZE (in) CONFIGURATION NO. OF BOXES SHELF CENTRES
15” x 66” 1 deep/2 high 10 24”30” x 66” 2 deep/2 high 20 24”
* Capacities based on 35 lbs. per box Box Size 13”w x 15”3/4”d x 101/4”h
GARMENT AND RETAIL BULK STORAGE
EASYUP 7000 garment and display racks allow garment rods and storage shelves to
be integrated into any unit.
Installation: Rods either fixed permanently at specific heights or boltless
for quick adjustability.
High Capacity Rods: Available for heavy garments; lengths up to 72”.
LIGHT DUTY BEAMS: LD 36, 42, 48, 60
Single locking clip. V-type design to
support shelf. 1 1/4” front face.
MEDIUM DUTY BEAMS: MD 36, 42,
48, 60, 66, 72
Double locking clip. 90° return bend
to support the shelf. 2” front
face.
HEAVY DUTY BEAMS: HD 48, 60, 66,
72, 96
Double locking clip. 90° return bend to
support the shelf. 2 1/2” face
front.
CUSTOMIZED STORAGE SYSTEMS AVAILABLE:
Mobile Storage Systems Registry Storage
Medical Record Storage Art and Artifacts Storage
Radiology Storage Rolling Stock and Carts
Tape, Cassette and Reel Storage Drug and Food Storage
Hanging Storage Fabric and Garment Storage
Firearms and Evidence Storage Display Storage
Map Storage Tool Storage
SAFETY CLIPS:Spring clip locks Beam into the post slots
for safety. Can be removed easily.
Recommended for uneven floors
and for mezzanine applications on
bottom & top beams of lower
units.
AISLE SUPPORT CLIPS:Used to attached catwalk support (slotted
angle) to Posts.
Straight or 90° Angle
FOOT PLATES:
Foot plates clip into tube section of post
to disperse weight on tile or wood
floors, etc. Foot plates are punched
for lagging to floor, if required.
EASYU P 7000 S H E LV I N G SYSTE M SSTO R AG E SYSTE M S
EASYU P 7000 S H E LV I N G SYSTE M SC O M PO N E NTS
EASYU P 7000 S H E LV I N G SYSTE M SC O M PO N E NTS
ADVAN C E D FEATU R E S
LONG SPAN SHELVING (BULK STORAGE)
EASYUP 7000 is the ideal universal shelving system designed for hand loading of
large size or heavy merchandise. It features open accessibility from all sides as no
cross bracing is required.
Shelf Size Range: From12” x 36” to 48” x 96”
Capability of 96” x 96” with back to back units.
Beam Variety: Selection from the most economical beam to 2000 lbs. load
capacity per level.
FOUR MAIN COMPONENTS
Common Posts:
Are 12 gauge, one piece impact resistant and squared for strength with rounded
corners for safety. Posts are slotted on 2” centres for Beams and have holes on 6”
centres for back to back bolting, wall anchoring or for aid in Beam positioning. For
High-Rise Systems or 3 Tier Mezzanines, Posts can be doubled up at lower levels for
increased load capacities.
Cross Members:
Are “Z” shaped, with a patented Safety Locking Tab which can be unlocked again to
interchange sizes and adjust depths.
Beams:
Double-Hook Beams on top and bottom provide complete lateral rigidity without the
interference and cost of braces. Three types of Beams are available from single to
double hooking heavy duty Beams, to match shelf load requirements with minimum
Beam size.
Shelves:
Are re-inforceable with Shelf Support and Tie Bars.
Particle Board Shelves offer strength with economy.
Wire Mesh Shelves allow passage of air, light and water and will not retain dust
or debris.
TIE BARS: TB 18, 24, 30, 32, 36, 48
Clip into the bottom lip of a pair of
beams, preventing beams
from “bowing out”
under load.
SHELF SUPPORTS FOR MD BEAMS:
MSS 18, 24, 30, 32, 36, 48
Designed to support shelves at any
point locking into upper lip of
beam.
SHELF SUPPORTS FOR HD BEAMS:
HSS 24, 30, 36, 48
Shelf Supports lock into the upper
lip of a pair of beams.
CROSS MEMBERS:
Cross Member and posts form a rigid end
frame. Cross Members are
designed with a patented
locking tab to be
turned into the post
for safety and rigidity.
SHELF BARS: SB 18, 24, 30, 32, 36, 48
Shelf Bars rest on upper edge of beam,
retained between posts
and shelves.
POSTS:
Slots on 2” centres, covering 3
sides. Half slot on top for flush
mounted top shelf.
POST SPLICERS:
Steel splice (2 per joint) are
used to extend height of
post. Splicers are designed
to force-fit into the hollow
sections of the post.
STEEL SHELVES (full size, painted):
SH All standard sizes up to 24” x 48”
Front and back edges are channel formed
and drop over front & back beams
providing extra strength (beam plus
shelf capacity).
PARTICLE BOARD SHELVES:
5/8” Industrial Grade 45 lb. test particle
board is an ideal economical storage shelf
in conjunction with EASYUP beams. In
layouts all shelves are actual size.
P - Common Post
CM - Cross Member
LD - Light Duty Beam
MD - Medium Duty Beam
HD - Heavy Duty Beam
MSS - Shelf Support for MD Beam
HSS - Shelf Support for HD Beam
TB - Tie Bar
SB - Shelf Bar
SH - Steel Shelf
WMS - Wire Mesh Shelf
PB - Particle Board Shelf
DI - Drawer Insert
THE NEW GENERATION OF SHELVING
• Complete boltless and clipless for quickest
assembly.
• Accessibility from all sides since no “X” braces
required.
• Common Posts reduce cost for
Add-On Units.
• Shelves can be easily re-adjusted after being
installed.
• Back to back installation without gap and tight
against a wall.
• Post and Cross Members lock together in both
planes to form a rigid end frame with high load
capacities.
• Knocked down type end frames allow for height,
capacity and depth adjustability at any time.
• Diverse accessories allow for expansion without
using more floor space.
• EASYUP is shipped knocked down to reducing
freight costs.
ARCHIVE STORAGE
EASYUP 7000 Shelving Systems provide most economical storage of Banker Boxes (letter and legal size)
Tapes, X-Rays, and Medical Records. Beam sizes and capacity have been specifically developed for
maximum storage utilization.
Application: Store boxes single height and depth.
Further Space Savings: Store boxes double high and double deep.
High Rise: Heavy Duty end frames allow for Mezzanines and High Rise
Picker Systems.
Access: From all sides and back to back units.
STANDARD BANKER BOX UNITS
SHELF SIZE (in) CONFIGURATION NO. OF BOXES SHELF CENTRES
15” x 66” 1 deep/2 high 10 24”30” x 66” 2 deep/2 high 20 24”
* Capacities based on 35 lbs. per box Box Size 13”w x 15”3/4”d x 101/4”h
GARMENT AND RETAIL BULK STORAGE
EASYUP 7000 garment and display racks allow garment rods and storage shelves to
be integrated into any unit.
Installation: Rods either fixed permanently at specific heights or boltless
for quick adjustability.
High Capacity Rods: Available for heavy garments; lengths up to 72”.
LIGHT DUTY BEAMS: LD 36, 42, 48, 60
Single locking clip. V-type design to
support shelf. 1 1/4” front face.
MEDIUM DUTY BEAMS: MD 36, 42,
48, 60, 66, 72
Double locking clip. 90° return bend
to support the shelf. 2” front
face.
HEAVY DUTY BEAMS: HD 48, 60, 66,
72, 96
Double locking clip. 90° return bend to
support the shelf. 2 1/2” face
front.
CUSTOMIZED STORAGE SYSTEMS AVAILABLE:
Mobile Storage Systems Registry Storage
Medical Record Storage Art and Artifacts Storage
Radiology Storage Rolling Stock and Carts
Tape, Cassette and Reel Storage Drug and Food Storage
Hanging Storage Fabric and Garment Storage
Firearms and Evidence Storage Display Storage
Map Storage Tool Storage
SAFETY CLIPS:Spring clip locks Beam into the post slots
for safety. Can be removed easily.
Recommended for uneven floors
and for mezzanine applications on
bottom & top beams of lower
units.
AISLE SUPPORT CLIPS:Used to attached catwalk support (slotted
angle) to Posts.
Straight or 90° Angle
FOOT PLATES:
Foot plates clip into tube section of post
to disperse weight on tile or wood
floors, etc. Foot plates are punched
for lagging to floor, if required.
EASYU P 7000 S H E LV I N G SYSTE M SSTO R AG E SYSTE M S
EASYU P 7000 S H E LV I N G SYSTE M SC O M PO N E NTS
EASYU P 7000 S H E LV I N G SYSTE M SC O M PO N E NTS
ADVAN C E D FEATU R E S
LONG SPAN SHELVING (BULK STORAGE)
EASYUP 7000 is the ideal universal shelving system designed for hand loading of
large size or heavy merchandise. It features open accessibility from all sides as no
cross bracing is required.
Shelf Size Range: From12” x 36” to 48” x 96”
Capability of 96” x 96” with back to back units.
Beam Variety: Selection from the most economical beam to 2000 lbs. load
capacity per level.
FOUR MAIN COMPONENTS
Common Posts:
Are 12 gauge, one piece impact resistant and squared for strength with rounded
corners for safety. Posts are slotted on 2” centres for Beams and have holes on 6”
centres for back to back bolting, wall anchoring or for aid in Beam positioning. For
High-Rise Systems or 3 Tier Mezzanines, Posts can be doubled up at lower levels for
increased load capacities.
Cross Members:
Are “Z” shaped, with a patented Safety Locking Tab which can be unlocked again to
interchange sizes and adjust depths.
Beams:
Double-Hook Beams on top and bottom provide complete lateral rigidity without the
interference and cost of braces. Three types of Beams are available from single to
double hooking heavy duty Beams, to match shelf load requirements with minimum
Beam size.
Shelves:
Are re-inforceable with Shelf Support and Tie Bars.
Particle Board Shelves offer strength with economy.
Wire Mesh Shelves allow passage of air, light and water and will not retain dust
or debris.
TIE BARS: TB 18, 24, 30, 32, 36, 48
Clip into the bottom lip of a pair of
beams, preventing beams
from “bowing out”
under load.
SHELF SUPPORTS FOR MD BEAMS:
MSS 18, 24, 30, 32, 36, 48
Designed to support shelves at any
point locking into upper lip of
beam.
SHELF SUPPORTS FOR HD BEAMS:
HSS 24, 30, 36, 48
Shelf Supports lock into the upper
lip of a pair of beams.
CROSS MEMBERS:
Cross Member and posts form a rigid end
frame. Cross Members are
designed with a patented
locking tab to be
turned into the post
for safety and rigidity.
SHELF BARS: SB 18, 24, 30, 32, 36, 48
Shelf Bars rest on upper edge of beam,
retained between posts
and shelves.
POSTS:
Slots on 2” centres, covering 3
sides. Half slot on top for flush
mounted top shelf.
POST SPLICERS:
Steel splice (2 per joint) are
used to extend height of
post. Splicers are designed
to force-fit into the hollow
sections of the post.
STEEL SHELVES (full size, painted):
SH All standard sizes up to 24” x 48”
Front and back edges are channel formed
and drop over front & back beams
providing extra strength (beam plus
shelf capacity).
PARTICLE BOARD SHELVES:
5/8” Industrial Grade 45 lb. test particle
board is an ideal economical storage shelf
in conjunction with EASYUP beams. In
layouts all shelves are actual size.
P - Common Post
CM - Cross Member
LD - Light Duty Beam
MD - Medium Duty Beam
HD - Heavy Duty Beam
MSS - Shelf Support for MD Beam
HSS - Shelf Support for HD Beam
TB - Tie Bar
SB - Shelf Bar
SH - Steel Shelf
WMS - Wire Mesh Shelf
PB - Particle Board Shelf
DI - Drawer Insert
THE NEW GENERATION OF SHELVING
• Complete boltless and clipless for quickest
assembly.
• Accessibility from all sides since no “X” braces
required.
• Common Posts reduce cost for
Add-On Units.
• Shelves can be easily re-adjusted after being
installed.
• Back to back installation without gap and tight
against a wall.
• Post and Cross Members lock together in both
planes to form a rigid end frame with high load
capacities.
• Knocked down type end frames allow for height,
capacity and depth adjustability at any time.
• Diverse accessories allow for expansion without
using more floor space.
• EASYUP is shipped knocked down to reducing
freight costs.
ARCHIVE STORAGE
EASYUP 7000 Shelving Systems provide most economical storage of Banker Boxes (letter and legal size)
Tapes, X-Rays, and Medical Records. Beam sizes and capacity have been specifically developed for
maximum storage utilization.
Application: Store boxes single height and depth.
Further Space Savings: Store boxes double high and double deep.
High Rise: Heavy Duty end frames allow for Mezzanines and High Rise
Picker Systems.
Access: From all sides and back to back units.
STANDARD BANKER BOX UNITS
SHELF SIZE (in) CONFIGURATION NO. OF BOXES SHELF CENTRES
15” x 66” 1 deep/2 high 10 24”30” x 66” 2 deep/2 high 20 24”
* Capacities based on 35 lbs. per box Box Size 13”w x 15”3/4”d x 101/4”h
GARMENT AND RETAIL BULK STORAGE
EASYUP 7000 garment and display racks allow garment rods and storage shelves to
be integrated into any unit.
Installation: Rods either fixed permanently at specific heights or boltless
for quick adjustability.
High Capacity Rods: Available for heavy garments; lengths up to 72”.
LIGHT DUTY BEAMS: LD 36, 42, 48, 60
Single locking clip. V-type design to
support shelf. 1 1/4” front face.
MEDIUM DUTY BEAMS: MD 36, 42,
48, 60, 66, 72
Double locking clip. 90° return bend
to support the shelf. 2” front
face.
HEAVY DUTY BEAMS: HD 48, 60, 66,
72, 96
Double locking clip. 90° return bend to
support the shelf. 2 1/2” face
front.
CUSTOMIZED STORAGE SYSTEMS AVAILABLE:
Mobile Storage Systems Registry Storage
Medical Record Storage Art and Artifacts Storage
Radiology Storage Rolling Stock and Carts
Tape, Cassette and Reel Storage Drug and Food Storage
Hanging Storage Fabric and Garment Storage
Firearms and Evidence Storage Display Storage
Map Storage Tool Storage
SAFETY CLIPS:Spring clip locks Beam into the post slots
for safety. Can be removed easily.
Recommended for uneven floors
and for mezzanine applications on
bottom & top beams of lower
units.
AISLE SUPPORT CLIPS:Used to attached catwalk support (slotted
angle) to Posts.
Straight or 90° Angle
FOOT PLATES:
Foot plates clip into tube section of post
to disperse weight on tile or wood
floors, etc. Foot plates are punched
for lagging to floor, if required.
NORTH AMERICAN STEEL
EASY-UP 7000 SHELVING SYSTEMS
The i d e a l o p en - t y p e l o n g s p an s h e l v i n g s y s t emFou r b a s i c i n t e r - l o ck i n g c omponen t s o n l y
NORTH AMERICAN STEEL
NORTH AMERICAN STORAGE
300 Hopkins Street, Whitby, Ontario Canada L1N 2B9Phone: (905) 668-3300Toll Free: (800) 735-4153 Email: [email protected]: (905) 668-5477 Web: www.naseco.ca
2103 - 7th Street, Nisku, Alberta Canada T9E 7Y3Phone: (780) 955-2444Toll Free: (800) 241-8968 Email: [email protected]: (780) 955-3463 Web: www.naseco.ca
With 50 Years
Manufacturing Experience
NORTH AMERICAN STEEL
is the leading name for
Innovative Storage Ideas
AUTHORIZED DISTRIBUTOR:
Pa l l e t Rack ing Sys tems
Kwikerec t S tee l She l v ing
C lo thes Lockers
E ASYU P 7000 S H E LV I N G SYSTE M SSTO R AG E SYSTE M S
MEZZANINE SYSTEMS
EASYUP 7000 can easily be extended to provide multiple storage levels
where ceiling heights permit. Economical method to add storage without
adding floor space by either: extending your existing (or new) shelving by
installing a Catwalk System to reach the upper level; or placing complete
Mezzanine floor over your existing (or new) shelving, using the upper floor
for storage. Stairs, and rail, drop zones, safety gates and conveyors are
available for maximum efficiency.
AUTOMOTIVE STORAGE
EASYUP 7000 specialty units have been designed for automotive storage:
Tire Racks: 15”d x 72”w units for tire storage.
Muffler Racks: Open shelf unit with wire mesh top shelf for
muffler storage.
Fender & Trim Racks: Open unit with back supports for vertical storage.
Bulk Storage: Accessible from all sides to depth of 48” x 96”.
Back to Back units allow storage up to 48” x 96”.
Small Parts: Plastic, cardboard or steel bins, plus full extension
drawer inserts are available.
Display & Convenience: Add peg board to end of rows for hanging belts,
gaskets etc.
MAXIMUM EVENLY DISTRIBUTED STATIC LOAD PER PAIR OF BEAMS
BEAM STYLE 36 in. 48 in. 60 in. 72 in. 96 in.
LD V-Shaped Beam 500 400 250MD Medium Duty Beam 1200 950 700 480with tie-bar and shelf support 1800 1500 1200 900HD Heavy Duty Beam 2000 1400 1000 800 450with tie-bar and shelf support 1900 1700 1500 900*
Calculation based on: 1 Tie-Bar and 1 Shelf-Support for 36, 48, & 60” beams. 2 Tie-Bars and 2 Shelf-Support for 66, 72, & 96” Beams.Safety Factor: 1.66
HIGH RISE SYSTEMS
EASYUP 7000 heavy duty double post end frames, rigid cross members and
double hooking beams provide storage units up to 40 feet in height.
Cross aisle supports are provided to prevent tipping and add rigidity.
Open access to all shelves allow easy picking by entry guided wire or rail
picker trucks.