stick these · 2020. 11. 6. · stick these two semi circle off-cuts together and stick on the...
TRANSCRIPT
-
This design is based on 3.4mm plywood (this is what I used. Other thicknesses
should work without and modifications,
though a respective change in friction
between parts should be noted).
All holes have been designed for 6mm
dowel, assuming a kerf
-
Stick these two semi
circle off-cuts together and stick on the
underside for a hand grip.
Stick these two semi
circle off-cuts together and stick on the
underside for a hand grip.
-
1: Top layer2: Base layer3: Optional cover