sterling fluid systems group · pdf fileproduct summary worldwide a world leader - in fluid...

PRODUCT SUMMARY WORLDWIDE
STERLING FLUID SYSTEMS GROUP
www.sterlingfluidsystems.com
Note : For further information on this product range contact your local sales office or visit www.sterlingfluidsystems.com - Products

A WORLD LEADER - IN FLUID HANDLING
Sterling Fluid Systems specialises in Pumps, Vacuum Technology, Engineered Systems, Water Treatment Technology and Valves.
The broad product range provides engineered solutions to support the fluid handling requirements of all sectors of industry.
PROVEN PRODUCTS - SERVING INDUSTRY
Extensive application and material knowledge combined with the respected and established product ranges within the Sterling Fluid Systems Group ensures confidence throughout a wide range of markets and manufacturing processes.
RAPID RESPONSE - PRODUCT SELECTION
Rapid Access to Pump Information and Design is the very latest electronic product selection package.Selections and supporting data across the entire Sterling Fluid Systems pump product range can be printed on the spot and made available to customers to ensure they have the most up-to-the minute technical data.
LOCAL SERVICE NETWORK - SUPPORTED GLOBALLY
Sterling Fluid Systems recognises the need to provide the highest level of care and support for all its products and systems operating in the field.
With more than 200 Sterling Service Centres established around the world you can be sure the very best support is always within easy reach.
Page 2 of 16

COMMITTED TO ENGINEERING EXCELLENCE
QUALITY ASSURANCETotal Quality Assurance is offered by all Sterling Fluid Systems companies within the standards approved to ISO 9000.
Formal directives are also issued in-line with the European Community CE requirements.
All the Groups manufacturing facilities around the world comply with the required quality standards of the region as well as the necessary health and safety requirements.
DESIGNIn this increasingly competitive world, we have the ability to provide new innovative designs which are both cost effective and provide high levels of reliability.
Utilising the most sophisticated Computer Aided Design packages ensures that optimum mechanical and hydraulic performances are achieved.
FOUNDRIESIn-house foundries located in Europe and the Americas, specialise in the supply of precision components and castings in high alloy steels and nickel based alloys.
These modern, well equipped foundries respond rapidly to all customer demands as well as serving the Sterling Fluid Systems companies.
MANUFACTURINGIn excess of 30 manufacturing and assembly facilities worldwide operate as individual units, all forming part of an integrated global manufacturing operation.
These centres of engineering excellence design, manufacture and develop products, systems and technologies utilising the most modern DNC processes.
TESTINGExtensive testing facilities ensure performance levels of the various products meet or exceed the specifications as laid down by customers and inspection authorities.
Working in partnership -Our understanding of your application and process requirements, enables us to provide the engineered solution that is right for you.
Page 3 of 16

Page 4 of 16

Page 5 of 16

Maximum performanceFlow rate: 650 m3/h 2860 USgpmHead: 150 m 490 ftTemperature: 400 C 750 FPressure: 25 Bar 363 psiSpeed: 3600 rpm
Features & design options Standards to: ISO 5199, ISO 2858, EN 22858, EN 733 Closed or semi-open impeller Mixed flow impeller Single or double mechanical seal Magnetic coupling Canned motor Heating jackets Monitoring systems High temperature designs Modular design Non-metallic material PTFE lined Standard and special materials
Product rangesSIHI - ISOCHEM, ISOLINED, ZLK, ZTKHALBERG - ISOCHEM, NOBLLaBOUR - TMN-BS, UTN-B, LE, J/UCN
END SUCTIONIN-LINE
Features & design options Standards to EN 733 Close coupled design Single mechanical seal Magnetic coupling Monitoring systems High temperature designs Modular design Standard and special materials
Product rangesSIHI - ZLI, ZTIHALBERG - INBL
END-SUCTIONSINGLE STAGE
Maximum performanceFlow rate: 4800 m3/h 21,000 USgpmHead: 240 m 800 ftTemperature: 400 C 750 FPressure: 40 Bar 580 psiSpeed: 3600 rpm
Features & design options Standards to: DIN 24255, ISO 5199,
ISO 2858, EN 22858, EN 733, ANSI/ASME B73.1M Closed or semi-open impeller Mixed flow impeller Low flow impeller Single or double mechanical seal Gas seal Magnetic coupling Canned motor Heating jackets Monitoring systems Triple volute casings High temperature designs Modular design Standard and special materials
Product rangesSIHI - ISOCHEM, ZLN, ZTN, ZEN, ZDN, ZHNHALBERG - ISOCHEM, NOW, CBTALaBOUR - PC, EO, LV, LPL, DPL, DZTM, LVA, SZ, LVB, TFA
END SUCTIONCLOSE-COUPLED
Page 6 of 16

SINGLE STAGESELF-PRIMING
Features & design options Standards to EN 733 Soft packing Single or double mechanical seal Magnetic coupling Non-metallic materials Suction lifts 8.0m (26 ft) Vertically mounted Special materials
Product rangesSIHI - ULNLaBOUR - ULN, UHLM, UPLM, BGMX, DPL, UTN-BLP, DHL, LPLA, LPHA, MHL, MPL, LHLA, G
HEAVY DUTYVERTICAL SUMP
Features & design options Vertical single stage Volute casing pump Vertical direct-mounted Motor stool for mounting Standard flange motors With or without stuffing box Multi-volute casing Two-stage design option Jacketed design option Low flow impeller Soft packing Mechanical seal Cantilever design Settings to 30 ft Standard and special materials
Product rangesTABER - 1000, 2000, 8000, 9000
PITOT TUBE
Features & design options Single stage pitot tube pump API 610 conformance Stationary wing-shaped pitot tube placed inside the rotor Pulsation-free flow with stable NPSHR curve Special alloys and their combinations to suit the application and pumped liquids
Product rangesSIHI - COMBITUBE
Page 7 of 16

SOLIDS HANDLING
SEWAGE, SLURRYSINGLE STAGE
Features & design options Horizontal Vertical direct-mounted Vertical open shaft Spiral vane impeller Soft packing Mechanical seal
Product rangesHALBERG - DBS
SLUDGE MIXERS
Maximum performanceFlow rate: 7200 m3/h 31,680 USgpmDigester tank volume: 15,000 m3/hTemperature: 60 C 140 FSpeed: 1500 rpm
Features & design options Vertical Screw type impeller Non-clogging Gas tight lip seal system Automatic grease pump Combined thrust and guide bearing Splash disk Ductile cast iron
Product rangesHALBERG - MFS
Page 8 of 16

MULTI-STAGE
MULTI-STAGE
Features & design options Horizontal multi-stage pump with closed impeller Renewable diffusers, case wear rings and shaft sleeve Hydraulic balance of axial thrust Standard and special materials
Product rangesSIHI - ZRM, ZSK, CEGAHALBERG - MSL, MSM, MSH, MSV, MSS
MULTI-STAGESELF-PRIMING
Features & design options Horizontal multi-stage pump with NPSH inducer stage Axial thrust is compensated by a single balance disc and counter disc Soft packing Mechanical seal Magnetic coupling Standard materials
Product rangesSIHI - TKH, TLH, UEA, UEH
MULTI-STAGEVERTICAL
Maximum performanceFlow rate: 72,000 m3/h 31,680 USgpmHead: 2100 m 6900 ftTemperature: 232 C 450 FPressure: 40 Bar 580 psiSpeed: 3600 rpm
Features & design options Vertical multi-stage pump with closed impeller Wet installations Axial thrust is absorbed by an adequately sized, deep groove ball bearing or by balancing of the impellers Motor stool for mounting standard flange motors Renewable diffusers, case wear rings and shaft sleeves Standard materials
Product rangeHALBERG - HES
Page 9 of 16

SIDE CHANNEL
HORIZONTAL WITHINDUCER STAGE
HORIZONTAL
Features & design options In-line design Self-priming Gas handling Standard to EN 734 Soft packing Single mechanical seal Magnetic coupling Barrel design Close coupled version
Product rangesSIHI - AOL, AKL, AOP, AOH, AKH, AEH, AIL, ADH, ASH
Features & design options Low NPSH inducer Self-priming Gas handling Standard to EN 734 Soft packing Single mechanical seal

sterling fluid systems group · pdf fileproduct summary worldwide a world leader - in fluid...

Documents