steps to check e1 in case of abis optimization
DESCRIPTION
Steps to Check E1 in Case of Abis OptimizationTRANSCRIPT
-
Steps to check the E1 in case of Abis Optimization
-
Table of Contents:
Check the SCGR connected to the TG ........................................................................... 2
Check the SC and the Device connected to the SCGR ................................................... 3
Get the SNT that contains the specified device(s) .......................................................... 3
Get the RBL from the SNT ............................................................................................. 4
Check the RBL status...................................................................................................... 4
Check the SCGR connected to the TG
You can use command RXMOP to check the SCGR connected to the TG.
-
Check the SC and the Device connected to the SCGR
You can use command RRSCP to get the number of SC connected and the device specified for
each SC.
-
Get the RBL from the SNT
Use command NTCOP to get the RBL connected in this SNT
-
COMMAND SUMMARY
RXMOP:MO=RXOTG-2; RRSCP:SCGR=2; RADEP:DEV=RBLT2-65; NTCOP:SNT=ETM2-4; DTSTP:DIP=2RBL2;
Hope you find this KO useful.
For any help please contact me on
MOATAZ YOUSRY
mailto:[email protected]