Step by step guide on how to produce liquid detergent and white emulsion paint

How to produce liquid detergent

Liquid detergent is an essential commodity that is widely used in most homes and the production can do you a lot of good. You do need heavy investment in materials or manpower except if you are going into it big time.

Furthermore, you can easily buy the empty cans to package your liquid detergents with your own label printer by a printer (this is cheap also). You can also start marketing it among your friends, neighbours and expand from there.

The demand for liquid detergent is high very, plus it is an essential commodity, thus you have a ready market waiting for your product.

Formulation for making liquid detergentsS/NO

CHEMICALS QUANTITY

1 Park R 250g2 Sulphuric Acid 5 liter3 Soda Ash 1kg4 Formalin ½ liter5 Water 50 liter6 Perfume To taste7 Colour To tasteNote: You can reduce the quantity to suite the size of the vessel you have to mix all the ingredients.

Steps to making liquid detergents1. Mix the soda ash with the 50 liters of water.2. Add the Sulphuric acid to it and stir.3. Add the Park R and stir very well.4. Add the formalin and stir.5. Add the colour and mix very well.6. Allow to stand for some time, then add perfume.7. Your detergent is ready.

How to produce One Gallon of white emulsion paint

There is no need to bore you with all the technicalities involved in paint production like Stabilization, reduction, filling, hiding, pigment-volume concentration (p.v.c) etc, but if you are interested, email.

As is our method here, I want to go straight and give you the direct information needed, so that anyone, even a child of five can do it.

Equipments neededI. Mixer: If you have a mechanical mixer, that will reduce the amount of stirring you are

going to do otherwise a vessel and a stirrer will be okay.II. Weighing Balance

Formulation

S/NO

Chemicals Formulation

1 Water 2.6 liters2 Formaldehyde (preservative) 0.009kg3 Titanium dioxide (pigment) 0.2kg4 Aluminum Silicate 0.05kg5 Ammonia Liquor (Stabilizer) 0.02kg6 Kaolin (White) 0.17kg7 Calcium Carbonate 3.00kg8 Defoamer 0.02kg9 Kerosene 0.10 liters10 P.V.A (binds all the components together) 0.45kg

PROCEDUREI. Measure out 1.95 liter of water and add titanium dioxide to it.

II. Add Aluminum Silicate, Kaolin and calcium carbonate in this order and mix very well.

III. Then add the preservative, stabilizer, defoamer and the P.V.A and mix.

IV. Check the PH to make sure that it is within 8.0 to 8.5, otherwise adjust with the ammonia liquor.

V. Also, check the capacity of your paint to determine if you will still add the remaining part of the water.

VI. Finally add the kerosene. This will be the last thing to be added, otherwise the quality of your paint will be affected.

VII. Then, your paint is ready.

Precaution: When making any product as described in this site, it's important to be safe. Since what you are dealing with are toxic chemicals, the potential to seriously hurt, injure, and even kill yourself and others exist. This site and its contributors will not be held responsible for any injury, death, or destruction of property that occurs while attempting to make this product