step by step giude [comic strip]

13
Step 1 - An Idea The first step is to come up with an idea. I carry a sketchbook/notebook and write down any crazy idea that enters my head. I also use it for casual life drawing, figuring out characters, scribbling observations, writing telephone numbers down and for stealing ideas from other people that I can modify for my own evil purposes. I get through about one sketchbook a month. It's not uncommon for me to wake up in the middle of the night or whip out my book in the middle of a darkened theater to write down and idea. I have lots of ideas, however nearly all of them are pretty lame in the cold light of day. I'd say currently, even with a daily schedule to keep, I still reject 90% of my ideas although it should probably be higher. So it's definitely quality not quantity that's important. I spent ages here trying to find a page of my sketchbook that didn't look completely embarrassing. Step 2 - Rough Sketch My rough sketches are so rough that sometimes I have trouble deciphering them myself. Usually this is because I am intent on getting the idea on paper as quickly as possible before I forget. I end up writing out some words again more legibly and also to remind myself how to spell them later on. There is lots of crossing out and added lines. Sometimes I have several "punch lines" for one joke. The example I'm going to show is an idea that originated from the little mirror I stick on my bicycle helmet. I'm not sure this idea is not one of my best. However, I've learned that sometimes mediocre ideas come to life once they are colored so we'll see.

Upload: ramolelo

Post on 19-Dec-2014

236 views

Category:

Design


0 download

DESCRIPTION

Making a comic strip

TRANSCRIPT

Page 1: Step by step giude [Comic Strip]

Step 1 - An Idea The first step is to come up with an idea. I carry a sketchbook/notebook and write down any crazy idea that enters my head. I also use it for casual life drawing, figuring out characters, scribbling observations, writing telephone numbers down and for stealing ideas from other people that I can modify for my own evil purposes. I get through about one sketchbook a month. It's not uncommon for me to wake up in the middle of the night or whip out my book in the middle of a darkened theater to write down and idea. I have lots of ideas, however nearly all of them are pretty lame in the cold light of day. I'd say currently, even with a daily schedule to keep, I still reject 90% of my ideas although it should probably be higher. So it's definitely quality not quantity that's important. I spent ages here trying to find a page of my sketchbook that didn't look completely embarrassing.

Step 2 - Rough Sketch My rough sketches are so rough that sometimes I have trouble deciphering them myself. Usually this is because I am intent on getting the idea on paper as quickly as possible before I forget. I end up writing out some words again more legibly and also to remind myself how to spell them later on. There is lots of crossing out and added lines. Sometimes I have several "punch lines" for one joke. The example I'm going to show is an idea that originated from the little mirror I stick on my bicycle helmet. I'm not sure this idea is not one of my best. However, I've learned that sometimes mediocre ideas come to life once they are colored so we'll see.

Page 2: Step by step giude [Comic Strip]

Step 3 - A Quiet Space Although ideas and rough sketches can occur anywhere and everywhere, I can ink in no place other than my underworld studio. Here you can see my three external hard drives on the shelf —filled mostly with music—buried amongst toys, books and CDs. I keep my art tools on the left of the desk (note elephants foot) even though I'm right handed because the other side has the laptop and the Wacom tablet. Other useful items include an intercom/telephone to the upstairs world, large supply of music, glass of water and paper towels (not shown). The real important think is the lighting. I have three light sources and two windows so when I draw there are no shadows. Thank you Ikea. I have a little slanted drawing board that I usually use to work on but it's upstairs at the moment so I'll be working directly on the desk today. It's usually a bit neater than this believe it or not.

Step 4 - Panels This is a four panel strip so I pull out my four panel template (each box is 5" x 3"). This is something I made for myself out of matte (some say mat) board and an Xacto knife and is extremely useful and saves a lot of time. I also made one for 3 panels (10.5" x 3.5") and "editorial" size (10" x 7"). Because my scanner is 9" x 12" and I haven't figured out how to "stitch" two scans together, this is the maximum size of all my art. That's the scanner standing vertical behind the laptop. I like the fact it uses very little real estate on my desk. You can also see my Elviki statuette and some of my Tikis and fez monkeys. The photo makes it look quite dark (probably because the small spot lamp is shining right into the camera).

Step 5 - Pencils The strip is initially sketched with my favorite Faber Castel DS05 pencil (which I've had since 1976!) with a 2B lead on Strathmore Vellum Bristol board. There are two types of Bristol board that I know of. The "smooth" type tends to bleed to much for my liking although most cartoonists tend to prefer it. I already started inking the first letter when I remembered I hadn't photographed this stage. Sorry.

Page 3: Step by step giude [Comic Strip]

Step 6 - Lettering I use a green plastic Rapidesign lettering guide template. I used to use an Ames lettering guide that drew lines but I'm too lazy these days. Plus I like the effect I get when the pen slightly touches the guide and makes a straight edge at the bottom. I'm a bit sloppy with the lettering but I refuse to use a computer font as it's nearly impossible to get that to look good unless you have someone who makes a font out of your own handwriting. I should probably take more care and pride in my lettering. Something to work on I think.

Step 7 - Finished Lettering When I ink over the penciled lettering I can center it more and make corrections although there's still time to adjust this once it's scanned. Sometimes I even completely change text at this point. I think that because it's becoming "final" I take a more critical view of what I'm actually doing. I'm still not sure this is funny. Too late to back out now.

Page 4: Step by step giude [Comic Strip]

Step 8 - Inking the Characters I ink using size 0 and 00 Robert Simmons 785 white sable brushes and Pelikan drawing ink. I'd like to use cruelty-free brushes but I haven't found any good synthetic ones yet so those poor sables suffer for my art. Supposedly the best brushes are the Windsor and Newton Series 7. However, they have very long barrels so that don't have the accuracy of the shorter brushes although they do last longer without having to reload. I have a supply of vintage Pelikan ink that seems to be so much darker than the new stuff but it's probably also full of all sorts of banned chemicals that will cause me to go blind and grow a third nipple. It's important to use the correct waterproof non-fade drawing ink and not the stuff you put in fountain pens. Some of the details are done with Pigma Micron or Copic Multiliner pens (usually 08 and 05 sizes) and I usually draw the borders with a customized Kuretake Sumi Brush pen. I also use crow quill pens a lot (I even have one I made myself out of an actually crow quill I found). These are much better than a brush for certain effects, namely cross-hatching and really thin lines. The nibs I like best are Hunt 102. 108 and 99 but that's only because those are the nibs I read my favorite cartoonists use. Speedball recently bought up Hunt and the poor quality nibs they now produce are a thing of great bitterness among cartoonists these days. Speedball do sell a handy little "cartooning" nib pack which is a pretty cheap way of experimenting. Gillotte is another good brand of nibs. If someone was paying me to do this properly I would use crow quills more than I do.

Step 9 - Finished Inking the Characters I ink the characters first which is the opposite of how I color (background first). One important thing is to make sure the weight of the brush is heavier on the character outlines and the undersides of the character's bodies. Notices I left Weenus' hands out in the first panel. They were too small to do with a brush. I probably should have left the other hands undone as well. Oh well, no one will notice.

Page 5: Step by step giude [Comic Strip]

Step 10 - Background Here's where the context really comes into play. The brush goes away and I use the crow quills or the Microns to add a background. I started off thinking they were going to be in front of a brick wall but at the last minute I changed to the wooden fence (this is the view I have out of my own window). Usually I wouldn't draw such a straight line at the bottom of the wooden fence but I guess I'll live with it for now. It's probably ignoring details like this that keep me from being a rich and successful cartoonist.

Page 6: Step by step giude [Comic Strip]

Step 11 - White Out and Erasing the PencilsI usually do this stage outside if it's not raining so the little eraser snowflakes don't get everywhere. For some reason at this point I notice several details I need to fix later. For example I'm not keen at all on that wing mirror in the second panel. I fix mistakes with regular Liquid Paper and then erase the pencil using an extra soft TriTip eraser. I get through an eraser a week. I also have some Pelikan white opaque ink that is good for inking over black but it's not always as opaque as I'd like. When I was too poor to use Bristol board all the time I used thin paper and would often crease up my art while erasing the pencils. That disaster is second only to dropping the brush or tipping the ink bottle over everything.

Step 12 - Scanning In the olden days, that would be it. You'd stick it in a tube to mail to your newspaper syndicate and try and make the last postal collection to beat deadline. However, somehow the computer age has added a whole bunch of extra work for the cartoonist. First the finished artwork is scanned as grayscale using a Canon LiDE500F at 600 DPI. I use Photoshop (I'm still using CS2) for which a Wacom Graphire II tablet comes in really handy. Also, for this example I'm using a five year old Sony Vaio with a huge 18" screen but I want to point out I usually use Macs. I'm not a fan of either Macs or PCs. If I had my way anyone involved in developing operating systems would be doing hard time in Sing Sing along with Bush and Cheney.

Page 7: Step by step giude [Comic Strip]

Step 13 - Rearranging the Boxes With a three panel strip I can skip this stage but since I drew the "two-up two-down" formation I need to rearrange as a regular looking strip.

Step 14 - Threasholding and Layering The threshold setting is very important because it reduces your art to 2 bit black or white allowing you to create a neat layer which you can color behind. If you don't do this there will be a graduation from black to white through a series of gray which will not make for a crisp coloring experience. In Photoshop the default Threshold setting is 128 which is usually fine although I prefer 140 as it makes my lines bolder and more masculine. Once you adjust your threshold you immediately see a wonderful transformation on the screen as the jaggy grayscale scan becomes a crisp line art. It's now safe to turn your image from a grayscale to a RGB mode so we have a full color palette to work with (if this were for "print" you would convert to a CMYK mode). Next stage is to make a second layer for the background colors. I then use the magic wand set at 10 to select the white areas in the top layer and delete them. The bottom later is then selected and filled with a color which will be the majority of the background (or the area behind the most fiddly bits). In this case brown for the fence. So basically I now have a top later which is just a web of black lines on transparentness and the color layer underneath will show through ensuring I won't accidentally color over any of the black. I forgot to do a screenshot with the brown behind but you'll get the idea.

Page 8: Step by step giude [Comic Strip]

Step 15 - Coloring the Background So now comes the less interesting part. From time to time I color the old fashioned way using Schmincke watercolors but that's a very different and more subtle look than the bold colors needed to attract the attention of today's Internet kids. So, using the paintbrush in combination with the magic wand I start adding colors. This is where the Wacom really comes in handy. Here's I selected the speech bubbles with the magic wand and filled with white. The black layer is temporarily hidden so I could clean up behind the letters.

Page 9: Step by step giude [Comic Strip]

Step 16 - More coloring I always start with the background first and add shading and shadows so that the character colors can then be painted on top rather than have to go around them. Using the magic wand you can mask out various areas to allow you to be sloppy with the painting without going over areas you want to keep. As I go along I correct little things. I still haven't gotten to that wing mirror.

Step 17 - Coloring the Characters I hate coloring but once I get to the characters it's not so bad as it really brings the cartoon to life. Notice I have a separate file of custom colors I use a lot. I'm sure there's actually a way to to this better in Photoshop but I can never be bothered to figure it out. As you can probably tell I'm no expert in Photoshop.

Page 10: Step by step giude [Comic Strip]

Step 18 - Final Details I clean up a lot of bits here and there. I add some highlights to the helmet. Not sure if this should have been green or maybe even a military style helmet. Oh well. A real professional would go back and change these things. See I finally fixed that wing mirror. I'm still not sure if this is such a great joke but with the pressure of a daily schedule to fill I can't be too picky. Even the White Album had some filler tracks.

Step 19 - Prepping for the Internet The usual internet display size is 600 pixels wide for pretty much all the sites I upload to. I change the image dimensions and save as a JPG. This is always an exciting moment for me, not just because I'm done but because all that detail looks much more impressive when it's zapped down to such a small size and the annoying little pixel messes aren't so obvious. I guess better artists than me are devastated that their huge masterpieces are reduced to a tiny bitmap but that's why I'm still a struggling unknown.

Step 20 - All Done! After backing up my scan file and the final output file, it's ready for uploading. Huzzah!