step 3: gorilla polywoven air bags...wise void filler in boxcars with payload weight ranging from...

20

Upload: others

Post on 31-Aug-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: STEP 3: Gorilla Polywoven Air Bags...wise void filler in boxcars with payload weight ranging from less than 75,000 lbs to as high as 205,000. ITW Shippers provides 5 Gorilla Polywoven

How to Install Gorilla AirbagsSTEP 1: Position the airbag at least 1 inch above the floor, flush with the rear edge of the load to prevent fric-tion during transit. No part of the airbag should stick out beyond the edge of the load.

STEP 2: Attach inflator to valve and squeeze trigger to begin infla-tion. When desired pressure has been achieved remove inflator and tightly secure valve cap.

STEP 3: Create a bulkhead.

Safety TipsAlways wear safety glasses with side shields.

Do use a filter and regulator on air line.

Protect the airbag when in-flating, avoid sharp objects

Use cardboard and plywood to protect airbag on both side whenever possible.

Never use the inflator as a blowgun for cleaning

Never obstruct rear vacuum opening while inflating

Never point inflator towards face or body

Never use folded airbags in voids.

Never use air bags as a level-ing device or trailer roof securement.

do not place folded air bags in voids.

How to Install How to Install Gorilla AirbagsGorilla AirbagsSTEP 1:STEP 1:STEP 1:STEP 1:STEP 1:STEP 1:STEP 1:STEP 1:STEP 1:STEP 1:STEP 1:STEP 1:at least 1 inch above the floor, flush with at least 1 inch above the floor, flush with the rear edge of the load to prevent fricthe rear edge of the load to prevent friction during transit. No part of the airbag tion during transit. No part of the airbag should stick out beyond the edge of should stick out beyond the edge of load.load.

STEP 2STEP 2STEP 2STEP 2STEP 2STEP 2valve and squeeze trigger to begin inflavalve and squeeze trigger to begin inflation. When desired pressure has been tion. When desired pressure has been achieved remove inflator and tightly achieved remove inflator and tightly secure valve cap.secure valve cap.

STEP 3: STEP 3: STEP 3: STEP 3: STEP 3: STEP 3:

ITW Shippers Gorilla polywoven air bags are made to hold tremendous load force that locks your load in place. AAR verified, the Gorilla airbag has an extremely durable woven outershell and protective barrier, which is also moisture resistant. Once inflated, the gorilla airbag becomes ridged, literally locking loads into place for the journey. Gorilla air bags are also reuseable up to 4 times in over the road ship-ments, and 100% recycleable.

Available in Levels 1-5, with both Stock and Made to Order sizes. For further details and pricing specials, contact a sales representative today.

Gorilla Polywoven Air Bags

To Release Air: Push down on cross piece and turn to the LEFT to lock the back flap into the OPEN position. Place bag into a container for reuse. The weight of addition-al bags will complete the deflation process.

Page 2: STEP 3: Gorilla Polywoven Air Bags...wise void filler in boxcars with payload weight ranging from less than 75,000 lbs to as high as 205,000. ITW Shippers provides 5 Gorilla Polywoven

Moisture Resistant for unpredictable weather conditions.

Reuseable

Moisture Resistant

AAR Verified

Recycleable

Extremely durable outer shell

Reuseable up to four times for light over-the-road shipments

Naturally repels moisture; perfect for unpredictable weather conditions

Category 4 & 5 Recycling

Thoroughly tested and verified by the American Railroad Association

Turbo Flow inflators- for use with our Lightweight Gorilla Air Bags3 versions to choose from

Rigid material supports tremendous loads- weighing up to 205,000 lbs.

Syntex Inflator for use with our Heavyweight Gorilla Air Bags

Easy to Deflate

Simple to Inflate

Page 3: STEP 3: Gorilla Polywoven Air Bags...wise void filler in boxcars with payload weight ranging from less than 75,000 lbs to as high as 205,000. ITW Shippers provides 5 Gorilla Polywoven

Which air bag is right for me?

Airbags are classified into two categories: lightweight and heavyweight.

LIGHTWEIGHT AIRBAGS- Level 1 air bags are sometimes referred to as LIGHTWEIGHT air bags and are primarily used as lateral void filler in boxcars, trailers and containers. There are additional durable LIGHTWEIGHT air bags without Level 1 verification whose primary use is limited to over-the-road truck application.

HEAVYWEIGHT AIRBAGS- Level 2-5 air bags are referred to as HEAVYWEIGHT air bags and are used as length-wise void filler in boxcars with payload weight ranging from less than 75,000 lbs to as high as 205,000.

ITW Shippers provides 5 Gorilla Polywoven air bag types in Levels 1-5. Which air bag is right for you depends on a number of factors such as load weight, product type, shipping method, and loading method. To determine which air bag is right for you, contact a sales rep for a no obligation load audit.

Lightweight Heavyweight

air bag type Level 1 Level 2 Level 3 Level 4 Level 5

Load capacityless than

25,000 lbs less than

75,000 lbs

75,000 lbs - 160,000 lbs

160,000 lbs - 205,000 lbs

for horizontal roll paper application

up to

205,000 lbsAAR

veri�ed X X X X X

Max PSI 3.0 5.0 8.0 10.0 10.0

Transportation Mode

TruckIntermodal

Sea container

TruckIntermodal

Sea container

RailVessel

RailVessel

RailVessel

Truck VesselSea ContainerIntermodal Rail

Page 4: STEP 3: Gorilla Polywoven Air Bags...wise void filler in boxcars with payload weight ranging from less than 75,000 lbs to as high as 205,000. ITW Shippers provides 5 Gorilla Polywoven

1800.468.1230 (DOMESTIC ) +1 870.352.5700 (INTERNATIONAL) www.itwshippers.com

GORILLA LEVEL 1 size in size mm part # 36 x 36 900 x 900 mm L1W36036TF36 x 48 900 x 1200 mm L1W36048TF36 x 66 900 x 1600 mm L1W36066TF36 x 72 900 x 1800 mm L1W36072TF36 x 84 900 x 2100 mm L1W36084TF48 x 48 1200 x 1200 mm L1W48048TF48 x 72 1200 x 1800 mm L1W48072TF48 x 84 1200 x 2100 mm L1W48084TF48 x 96 1200 x 2400 mm L1W48096TF

GORILLA POLYWOVEN AIR BAGS STOCK SIZES & Made to Order sizes available

GORILLA LEVEL 2size in size mm part # 48 x 60 1200 x 1500 mm L2W48060SX48 x 84 1200 x 2100 mm L2W48084SX

GORILLA LEVEL 3size in size mm part #

30 x 48 800 x 1200 mm L3W30048SX30 x 60 800 x 1500 mm L3W30060SX30 x 96 800 x 2400 mm L3W30096SX30 x 102 800 x 2600 mm L3W30102SX36 x 48 900 x 1200 mm L3W36048SX36 x 60 900 x 1500 mm L3W36060SX36 x 72 900 x 1800 mm L3W36072SX36 x 102 900 x 2600 mm L3W36102SX36 x 108 900 x 2700 mm L3W36108SX36 x 120 900 x 3000 mm L3W36120SX48 x 48 1200 x 1200 mm L3W48048SX48 x 60 1200 x 15200 mm L3W48060SX48 x 72 1200 x 1800 mm L3W48072SX48 x 84 1200 x 2100 mm L3W48084SX48 x 96 1200 x 2400 mm L3W48096SX48 x 108 1200 x 2700 mm L3W48108SX48 x 120 1200 x 3000 mm L3W48120SX

GORILLA LEVEL 4 size in size mm part # 30 x 30 800 x 800 mm L4W30030SX30 x 48 800 x 1200 mm L4W30048SX30 x 60 800 x 1500 mm L4W30060SX30 x 96 800 x 2400 mm L4W30096SX30 x 102 800 x 2600 mm L4W30102SX36 x 48 900 X 1200 mm L4W36048SX36 x 60 900 x 1500 mm L4W36060SX36 x 72 900 x 1800 mm L4W36072SX36 x 96 900 x 2400 mm L4W36096SX36 x 102 900 x 2600 mm L4W36102SX36 x 108 900 x 2700 mm L4W36108SX36 x 120 900 x 3000 mm L4W36120SX48 x 60 1200 x 1500 mm L4W48060SX48 x 72 1200 x 1800 mm L4W48072SX48 x 84 1200 x 2100 mm L4W48084SX48 x 96 1200 x 2400 mm L4W48096SX48 x 102 1200 x 2600 mm L4W48102SX48 x 108 1200 x 2700 mm L4W48108SX48 x 120 1200 x 3000 mm L4W48120SX60 x 102 1500 x 2600 mm L4W60102SX60 x 108 1500 x 2700 mm L4W60108SX

size in size mm part #

30 x 60 800 x 1500 mm L5W30060SX30 x 96 800 x 2400 mm L5W30096SX30 x 102 800 x 2600 mm L5W30102SX36 x 48 900 x 1200 mm L5W36048SX36 x 60 900 x 1500mm L5W36060SX36 x 72 900 x 1800 mm L5W36072SX36 x 96 900 x 2400 mm L5W36096SX36 x 102 900 x 2600 mm L5W36102SX48 x 96 1200 x 2400 mm L5W48096SX48 x 102 1200 x 2600 mm L5W48102SX48 x 108 1200 x 2700 mm L5W48108SX48 x 120 1200 x 3000 mm L5W48120SX

GORILLA LEVEL 5