step 3 - dwarven forge · step 3 sw-004 - sewer wall page 1 of 2 base gray (gt002-bg) cardboard...
TRANSCRIPT
Side 2
Side 1
Step 1
Side 2
Side 1
Step 2
Side 2
Side 1
Step 3SW
-004
- S
ewer
Wal
l Pa
ge
1 o
f 2
Base Gray(GT002-BG)
Cardboard(GT002-CB)
Stone EdgeDrybrush(GT002-SE)
Apply Base Gray over the upper surface and edges of the piece using a #3 (Painting) brush. Apply the paint into the cracks between the stones, or leave the cracks unpainted to create more texture. Let the paint dry before moving to the next step.
Apply Cardboard to random stones on the stone facing using a #1 (Details) brush. This will add more detail to the stones. Let the paint dry before moving to the next step.
Dab a very small amount of Stone Edge Drybrush onto a #12 (Drybrush) brush, then brush onto a paper towel to remove excess paint. With a feather light touch, apply over the face of the upper stones. Be careful not to overdo it! Let the paint dry before moving to the next step.
SW-004 - Sewer Wall
Painting Guide
Step 4
Step 5 Shallow WaterSeaweed Green
(GT002-SG)
Side 2
Side 1
Side 2
Side 1
SW-0
04 -
Sew
er W
all
Pag
e 2
of
2
SW-004 - Sewer Wall
Painting Guide
Sludge*(GT002-SD)
Dab a very small amount of Sludge onto a #12 (Drybrush) brush, then brush onto a paper towel to remove excess paint. With a feather light touch, apply over the surface of the lower stone facing, leaving the deeper areas unpainted. Let the paint dry before moving to the next step.
Dab a very small amount of Shallow Water Seaweed Green onto a #12 (Drybrush) brush, then brush onto a paper towel to remove excess paint. With a feather light touch, apply over the surface of the lower stone facing.
Note: Use the same approach for your other Sewer Wall pieces shown here:
Straight Sewer Wall 1”SW-003
Sewer Wall Convex Curve
SW-005
Ladder WallSW-007
Hole Wall w/PlugSW-008/9
Sewer Wall Concave Curve
SW-006
Pro tip: Using a #3 (Painting) brush, apply a clear coat (we recommend Golden® Soft (Gloss) Gel Medium) to the lower parts of the sewer walls to create a wet appearance. Find a Golden® Artist Colors store near you at www.goldenpaints.com/store_locator
Shallow WaterSeaweed Green
(GT002-SG)
Step 2
SW-0
11 -
Dea
d E
nd
Slu
icew
ay P
age
1 o
f 1
Step 1
Step 3
SW-011 - Dead End Sluiceway
Painting Guide
Sludge(GT002-SD)
Using a #1 (Details) brush, apply Shallow Water Seaweed Green to the sewer floor in a random pattern to create a sludge midtone. Let the paint dry before moving to the next step.
Dab a very small amount of Sludge onto a #12 (Drybrush) brush, then brush onto a paper towel to remove excess paint. To create the highlights, paint over the entire surface and edges of the piece with a feather light touch. Let the paint dry before moving to the next step.
Using a #3 (Painting) brush, apply a clear coat (we recommend Golden® Soft Gel Gloss Medium) to the sewer floor to create a wet appearance.
Golden® Artist Colors Soft Gel (Gloss) Medium
Note: Use the same approach for your other Sewer Wall pieces shown here:
Sewer Floor 1 x 1
SW-002
Straight SluiceSW-011
Sluice T JunctionSW-013
Sluice CurveSW-015
Sluice 4-Way CrossingSW-014
Sewer Floor1 x 2
SW-001
Find a Golden® Artist Colors store near you at www.goldenpaints.com/store_locator