step 1 installation instructions 0 mtp - datcom inc. genspeed installation... · installation...
TRANSCRIPT
featuring
10 M
TP™
Ins
tall
ati
on
In
str
uc
tio
ns
TerminatesEasy as 1-2-3!
Step 1Use cable-stripping tool (Panduit #CJAST) to cut
back approximately 2” of the cable jacket. The
mosaic tape typically removes with the jacket.
Step 3Per diagrams below, insert twisted pairs into
termination cap to achieve proper orientation
of twisted pairs at each cable end. Trim ends
and terminate the Panduit Jack (part number
CJ6X88TG) using the EGJT termination tool.
Step 2Peel and remove the overall wrap. Separate
the pairs from the Flex-Separator™ and cut
the exposed cross-web using snipping tool
(Panduit #CWST).
4 Tesseneer DriveHighland Heights, Kentucky41076-9753Telephone: (800) 424-5666 (859) 572-8000www.generalcable.com
590 Barmac DriveNorth York, OntarioM9L 2X8 Telephone: (800) 561-0649 Fax: (800) 565-2529
GENERAL CABLE, FLEX-SEPARATOR, GENSPEED, MOSAICCROSSBLOCK and 10 MTP are trademarks of
General Cable Technologies Corporation.
©2009. General Cable Technologies Corporation.Highland Heights, KY 41076
All rights reserved. Printed in USA.Form No. DAT-0131-0609
35350
Termination Cap Pair Orientation for Cable End 1
Adjust Pair Position for Cable End 2
Pair Orientation for Cable End 2
4”6”
Inks
PMS
PMS
PMS
PMS
PMS
PMS
PMS
PMS
06/1
1/09
bp
GEN
353
50 G
S 10
MTP
Fan
deck
.ai
GS
10 M
TP In
stal
lati
on In
stru
ctio
ns F
ande
ck4-
colo
r pro
cess
4"w
x 6
"hA
dobe
Illu
stra
tor C
S3
featuring
10 M
TP™
Ins
tall
ati
on
In
str
uc
tio
ns
TerminatesEasy as 1-2-3!
Step 1Use cable-stripping tool (Panduit #CJAST) to cut
back approximately 2” of the cable jacket. The
mosaic tape typically removes with the jacket.
Step 3Per diagrams below, insert twisted pairs into
termination cap to achieve proper orientation
of twisted pairs at each cable end. Trim ends
and terminate the Panduit Jack (part number
CJ6X88TG) using the EGJT termination tool.
Step 2Peel and remove the overall wrap. Separate
the pairs from the Flex-Separator™ and cut
the exposed cross-web using snipping tool
(Panduit #CWST).
4 Tesseneer DriveHighland Heights, Kentucky41076-9753Telephone: (800) 424-5666 (859) 572-8000www.generalcable.com
590 Barmac DriveNorth York, OntarioM9L 2X8 Telephone: (800) 561-0649 Fax: (800) 565-2529
GENERAL CABLE, FLEX-SEPARATOR, GENSPEED, MOSAICCROSSBLOCK and 10 MTP are trademarks of
General Cable Technologies Corporation.
©2009. General Cable Technologies Corporation.Highland Heights, KY 41076
All rights reserved. Printed in USA.Form No. DAT-0131-0609
35350
Termination Cap Pair Orientation for Cable End 1
Adjust Pair Position for Cable End 2
Pair Orientation for Cable End 2
4”
6”
Inks
PMS
PMS
PMS
PMS
PMS
PMS
PMS
PMS
06/1
1/09
bp
GEN
353
50 G
S 10
MTP
Fan
deck
.ai
GS
10 M
TP In
stal
lati
on In
stru
ctio
ns F
ande
ck4-
colo
r pro
cess
4"w
x 6
"hA
dobe
Illu
stra
tor C
S3
featuring
10 M
TP™
Ins
tall
ati
on
In
str
uc
tio
ns
TerminatesEasy as 1-2-3!
Step 1Use cable-stripping tool (Panduit #CJAST) to cut
back approximately 2” of the cable jacket. The
mosaic tape typically removes with the jacket.
Step 3Per diagrams below, insert twisted pairs into
termination cap to achieve proper orientation
of twisted pairs at each cable end. Trim ends
and terminate the Panduit Jack (part number
CJ6X88TG) using the EGJT termination tool.
Step 2Peel and remove the overall wrap. Separate
the pairs from the Flex-Separator™ and cut
the exposed cross-web using snipping tool
(Panduit #CWST).
4 Tesseneer DriveHighland Heights, Kentucky41076-9753Telephone: (800) 424-5666 (859) 572-8000www.generalcable.com
590 Barmac DriveNorth York, OntarioM9L 2X8 Telephone: (800) 561-0649 Fax: (800) 565-2529
GENERAL CABLE, FLEX-SEPARATOR, GENSPEED, MOSAICCROSSBLOCK and 10 MTP are trademarks of
General Cable Technologies Corporation.
©2009. General Cable Technologies Corporation.Highland Heights, KY 41076
All rights reserved. Printed in USA.Form No. DAT-0131-0609
35350
Termination Cap Pair Orientation for Cable End 1
Adjust Pair Position for Cable End 2
Pair Orientation for Cable End 2
4”
6”
Inks
PMS
PMS
PMS
PMS
PMS
PMS
PMS
PMS
06/1
1/09
bp
GEN
353
50 G
S 10
MTP
Fan
deck
.ai
GS
10 M
TP In
stal
lati
on In
stru
ctio
ns F
ande
ck4-
colo
r pro
cess
4"w
x 6
"hA
dobe
Illu
stra
tor C
S3
featuring
10 M
TP™
Ins
tall
ati
on
In
str
uc
tio
ns
TerminatesEasy as 1-2-3!
Step 1Use cable-stripping tool (Panduit #CJAST) to cut
back approximately 2” of the cable jacket. The
mosaic tape typically removes with the jacket.
Step 3Per diagrams below, insert twisted pairs into
termination cap to achieve proper orientation
of twisted pairs at each cable end. Trim ends
and terminate the Panduit Jack (part number
CJ6X88TG) using the EGJT termination tool.
Step 2Peel and remove the overall wrap. Separate
the pairs from the Flex-Separator™ and cut
the exposed cross-web using snipping tool
(Panduit #CWST).
4 Tesseneer DriveHighland Heights, Kentucky41076-9753Telephone: (800) 424-5666 (859) 572-8000www.generalcable.com
590 Barmac DriveNorth York, OntarioM9L 2X8 Telephone: (800) 561-0649 Fax: (800) 565-2529
GENERAL CABLE, FLEX-SEPARATOR, GENSPEED, MOSAICCROSSBLOCK and 10 MTP are trademarks of
General Cable Technologies Corporation.
©2009. General Cable Technologies Corporation.Highland Heights, KY 41076
All rights reserved. Printed in USA.Form No. DAT-0131-0609
35350
Termination Cap Pair Orientation for Cable End 1
Adjust Pair Position for Cable End 2
Pair Orientation for Cable End 2
4”
6”
Inks
PMS
PMS
PMS
PMS
PMS
PMS
PMS
PMS
06/1
1/09
bp
GEN
353
50 G
S 10
MTP
Fan
deck
.ai
GS
10 M
TP In
stal
lati
on In
stru
ctio
ns F
ande
ck4-
colo
r pro
cess
4"w
x 6
"hA
dobe
Illu
stra
tor C
S3
featuring
10 M
TP™
Ins
tall
ati
on
In
str
uc
tio
ns
TerminatesEasy as 1-2-3!
Step 1Use cable-stripping tool (Panduit #CJAST) to cut
back approximately 2” of the cable jacket. The
mosaic tape typically removes with the jacket.
Step 3Per diagrams below, insert twisted pairs into
termination cap to achieve proper orientation
of twisted pairs at each cable end. Trim ends
and terminate the Panduit Jack (part number
CJ6X88TG) using the EGJT termination tool.
Step 2Peel and remove the overall wrap. Separate
the pairs from the Flex-Separator™ and cut
the exposed cross-web using snipping tool
(Panduit #CWST).
4 Tesseneer DriveHighland Heights, Kentucky41076-9753Telephone: (800) 424-5666 (859) 572-8000www.generalcable.com
590 Barmac DriveNorth York, OntarioM9L 2X8 Telephone: (800) 561-0649 Fax: (800) 565-2529
GENERAL CABLE, FLEX-SEPARATOR, GENSPEED, MOSAICCROSSBLOCK and 10 MTP are trademarks of
General Cable Technologies Corporation.
©2009. General Cable Technologies Corporation.Highland Heights, KY 41076
All rights reserved. Printed in USA.Form No. DAT-0131-0609
35350
Termination Cap Pair Orientation for Cable End 1
Adjust Pair Position for Cable End 2
Pair Orientation for Cable End 2
4”
6”
Inks
PMS
PMS
PMS
PMS
PMS
PMS
PMS
PMS
06/1
1/09
bp
GEN
353
50 G
S 10
MTP
Fan
deck
.ai
GS
10 M
TP In
stal
lati
on In
stru
ctio
ns F
ande
ck4-
colo
r pro
cess
4"w
x 6
"hA
dobe
Illu
stra
tor C
S3