step 1: create the surrounding moat · build a redstone drawbridge and moat pupil resource step 6:...
TRANSCRIPT
1
Build a Redstone drawbridge and moat
Pupil Resource
Step 1: Create the surrounding moat
Choose a location for your drawbridge and moat. Create the surrounding moat using
cobblestone:
2
Build a Redstone drawbridge and moat
Pupil Resource
Step 2: Add Redstone torches
Dig 4 blocks down, 4 blocks wide and 6 blocks long where you want the drawbridge to be:
Build cobblestone blocks 2 blocks apart and place Redstone torches on the inner side.
3
Build a Redstone drawbridge and moat
Pupil Resource
Step 3: Create a Redstone circuit
Create a circuit on these blocks using Redstone.
Test the circuit with a lever.
4
Build a Redstone drawbridge and moat
Pupil Resource
Step 4: Place sticky piston blocks
Place Sticky Piston blocks on top of the Redstone torches facing upwards.
Make sure they are 1 block below where the bridge will connect to your village house.
5
Build a Redstone drawbridge and moat
Pupil Resource
Step 5: Cover sticky piston blocks and test the bridge
Cover the sticky piston blocks with cobblestone.
6
Build a Redstone drawbridge and moat
Pupil Resource
Step 6: Cover the Redstone circuit
Cover the Redstone circuit, 1 block above using an Oakwood slab. This covers the hole next
to the lever to prevent breaking the circuit - if not fully covered, the water will wash away
the Redstone.
7
Build a Redstone drawbridge and moat
Pupil Resource
Step 7: Fill the moat with water
Ask your teacher to fill the moat with water using a water bucket.