Stella® Mechanism

If you have a problem, question, or request, callyour local dealer, or Steelcase Line 1 at888.STEELCASE (888.783.3522)for immediate action by people who want to help you.

(Outside the U.S.A., Canada, Mexico, Puerto Rico, and the U.S. Virgin Islands, call: 1.616.247.2500)Or visit our website: www.steelcase.com© 2015 Steelcase Inc. Grand Rapids, MI 49501 U.S.A.

Printed in U.S.A.

®

Page 1 of 218678201 Rev F

(See page 2 for Lift and Lock Mechanism)

SS20 SE23

1

3

2

TRACK

SCREW

To Enable Positive Tilt:

Please make use of all appropriate hardware provided. Mounting screws are 5/8" in length for attaching track to a worksurface with a 3/4" thickness or greater.

UNDERSIDE OF DESKTOP

Slide mechanism into track.

Insert end cap.

END CAP

SCREW

Secure end cap with the two (2) machine screws provided.

TILTLOCK-OUTSLEEVE

STORAGE POST

TILT ROD

A Remove Tilt Lock-out Sleeve from Tilt Rod.

B Snap Tilt Lock-out Sleeve onto Storage Post.

MECHANISM

L5 23

5" Arm / 23" Track

L7 26

7" Arm / 26" Track

Page 2 of 218678201 Rev F

®

Please make use of all appropriate hardware provided. Mounting screws are 5/8" in length for attaching track to a worksurface with a 3/4" thickness or greater.

1

3

Slide mechanism into track.2

NOTE: Orient track so holes align with channels on Series 9000 top.

MECHANISM

TRACK

SCREW

SCREW

END CAP

Insert end cap and secure with the two (2) machine screws provided.

UNDERSIDE OF DESKTOP

Attach keyboard platform (not shown) to mechanism using the hardware provided.

Lift and Lock Mechanism

TILT LOCK-OUT WASHER

To Enable Full Tilt Function:A Unscrew tilt lock-out knob from mechanism.

B Remove and flip over the Tilt Lock-out Washer then reassemble components as shown.

TILT LOCK-OUT KNOB