steel threaded bungs - wordpress.com threaded bungs these weld in bungs are made of solid round...
TRANSCRIPT
Steel Threaded BungsThese weld in bungs are made of solid round stock and drilled and threaded to your specified SAE thread. Bungs come in a few different length
and diameter options depending on thread size. Great for all your fabrication mounting needs.
Part # Thread Pitch Length O.D. Threaded Price Each
TB14C4 1/4" X 20 .400" 5/8" Through $3.00
TB14C75 1/4" X 20 .75" 5/8" Through $3.00
TB14C12 1/4" X 20 1.25" 5/8" Blind $3.25
TB516C4 5/16" X 18 .400" 3/4" Through $3.00
TB516C75 5/16" X 18 .75" 3/4" Through $3.00
TB516C12 5/16" X 18 1.25" 3/4" Blind $3.25
TB38C5 3/8" X 16 .500" 3/4" Through $3.00
TB38C1 3/8" X 16 1.0" 3/4" Through $3.00
TB38C15 3/8" X 16 1.5" 3/4" Blind $3.25
TB38C3 3/8" X 16 3.0" 3/4" Blind $4.00
TB12C1 1/2" X 13 1.0" 7/8" Through $5.00
TB12C2 1/2" X 13 2.0" 7/8" Blind $5.65
Steel Threaded BulletsThese weld on threaded bullet bungs are made of solid cold rolled steel and drilled and tapped to your thread choice. These are blind bungs
(hole does not go all the way through) and are rounded with a full radius at opposite end.
Part# Thread Size Length O.D. Price Each
RTB14C1 1/4" X 20 1.0" 3/4" $3.50
RTB14C15 1/4" X 20 1.5" 3/4" $3.75
RTB516C1 5/16" X 18 1.0" 3/4" $3.50
RTB516C15 5/16" X 18 1.5" 3/4" $3.75
RTB38C1 3/8" X 16 1.0" 3/4" $3.50
RTB38C15 3/8" X 16 1.5" 3/4" $3.75
RTB12C3 1/2" x 13 3.0" 7/8" $8.00
Pointed Threaded BulletsThese are a little different version of our ever popular threaded bullet, the pointed profile is to resemble a true bullet. These, like our others,
make a great looking mount for just about anything.
Part # Thread Size Length O.D. Price Each
PTB14C15 1/4" X 20 1.5" 3/4" $4.25
PTB516C15 5/16" X 18 1.5" 3.4" $4.25
PTH38C15 3/8" X 16 1.5" 3/4" $4.25
Counter Bored BungsThese weld on counter bored bungs are drilled through and counter bored to accept socket head cap screws, AKA Allen bolts,
flush with the top of the bung.
Part# Bolt Size Length O.D. Price Each
CBB1475 1/4" .75" 5/8" $3.00
CBB1412 1/4" 1.25" 5/8" $3.25
CBB51675 5/16" .75" 3/4" $3.00
CBB51612 5/16" 1.25" 3/4" $3.25
CBB3875 3/8" .75" 3/4" $3.00
CBB3812 3/8" 1.25" 3/4" $3.25
CBB7161 7/16" 1.0" 7/8" $4.00
CBB71615 7/16" 1.5" 7/8" $4.50
Standard NPT BungsMade from solid stock, drilled and tapped to accept male npt fittings
Part # Npt Size Length O.D. Material Price Each
NPT186 1/8" .650" 5/8" Steel $3.00
NPT186al 1/8" .650" 3/4" Aluminum $3.75
NPT186ss 1/8" .650" 5/8" Stainless Steel $3.75
NPT147 1/4" .750" 3/4" Steel $3.75
NPT147al 1/4" .750" 3/4" Aluminum $4.75
NPT147ss 1/4" .750" 3/4" Stainless Steel $4.75
NPT381 3/8" 1.0" 7/8" Steel $4.50
NPT381al 3/8" 1.0" 1" Aluminum $5.50
NPT381ss 3/8" 1.0" 7/8" Stainless Steel $5.50
NPT382 3/8" 2.0" 7/8" Steel $5.50
Stepped/Flanged NPT bungsMade from solid mild steel drilled and tapped to accept male NPT fittings, have a larger diameter .200" thick flange machined into them
to stand off the outer surface of your fluid container. The larger weld surface allows more strength, and a smaller hole to drill.
Part # NPT size Flange Dia. Stepped Dia. Length Price Each
SNPT18 1/8 NPT 3/4" 1/2" 1/2" $4.25
SNPT14 1/4 NPT 7/8" 5/8" 1/2" $4.25
SNPT38 3/8 NPT 1" 13/16" .600" $4.75
Coped Threaded BungsThese bungs are made from solid mild steel. One end is coped to fit over a specified tube diameter and the other is drilled
and tapped accept the specified hardware.
Part # Thread Size Cope Dia Stand Off Height Outer Dia. Price Each
SCTB1516C5 5/16 X 18 1" .5" 3/4" $5.25
SCTB1516C1 5/16 X 18 1" 1" 3/4" $5.25
SCTB1516C15 5/16 X 18 1" 1.5" 3/4" $5.25
SCTB12516C5 5/16 X 18 1.25" .5" 3/4" $5.25
SCTB12516C1 5/16 X 18 1.25" 1" 3/4" $5.25
SCTB12516C15 5/16 X 18 1.25" 1.5" 3/4" $5.25
SCTB15516C5 5/16 X 18 1.625" .5" 3/4" $5.25
SCTB15516C1 5/16 X 18 1.625" 1" 3/4" $5.25
SCTB15516C15 5/16 X 18 1.625" 1.5" 3/4" $5.25
SCTB138C5 3/8 X 16 1" .5" 3/4" $5.25
SCTB138C1 3/8 X 16 1" 1" 3/4" $5.25
SCTB138C15 3/8 X 16 1" 1.5" 3/4" $5.25
SCTB1238C5 3/8 X 16 1.25" .5" 3/4" $5.25
SCTB1238C1 3/8 X 16 1.25" 1" 3/4" $5.25
SCTB1238C15 3/8 X 16 1.25" 1.5" 3/4" $5.25
SCTB1538C5 3/8 X 16 1.625" .5" 3/4" $5.25
SCTB1538C1 3/8 X 16 1.625" 1" 3/4" $5.25
SCTB1538C15 3/8 X 16 1.625" 1.25" 3/4" $5.25
CTB138C5 3/8 X 16 1" .5" 1" $6.75
CTB138C1 3/8 X 16 1" 1" 1" $7.00
CTB138C15 3/8 X 16 1" 1.5" 1" $7.25
CTB1238C5 3/8 X 16 1.25" .5" 1" $6.75
CTB1238C1 3/8 X 16 1.25" 1" 1" $7.00
CTB1238C15 3/8 X 16 1.25" 1.5" 1" $7.25
CTB1538C5 3/8 X 16 1.625" .5" 1" $6.75
CTB1538C1 3/8 X 16 1.625" 1" 1" $7.00
CTB1538C15 3/8 X 16 1.625" 1.5" 1" $7.25
CWIRS1 1/2 X 13 1" 1" 1" $7.50
CWIRS12 1/2 X 13 1.250" 1" 1" $7.50
Blind Tank BungsBungs that are threaded blind, not all the way through, make great weld in mounts for fluid containers and many other needs.
Part# Material Thread Pitch O.D. Length Price Each
BTB14C12 Steel 1/4 x 20 5/8" 1.25" $3.25
BTB516C12 Steel 5/16 x 18 3/4" 1.25" $3.25
BTB516C12AL Aluminum 5/16 x 18 3/4" 1.25" $4.00
BTB516C12SS Stainless 5/16 x 18 3/4" 1.25" $4.00
BTB38C15 Steel 3/8 x 16 3/4" 1.50" $3.25
BTB38C15AL Aluminum 3/8 x 16 7/8" 1.25" $4.00
BTB38C15SS Stainless 3/8 x 16 3/4" 1.25" $4.00
Stepped Blind Tank BungThese bungs are made from solid steel, threaded blind to the specified thread pitch, and contain a flange .200 high with a 7/8" OD
and a stepped down dia of 5/8". They make a great mount for any fluid container.
Part # Thread pitch Length Flange Dia Stepped Dia Price Each
SBTB14C 1/4" X 20 1" 7/8" 5/8" $4.25
SBTB516C 5/16" X 18 1" 7/8" 5/8" $4.25
SBTB38C 3/8" X 16 1" 7/8" 5/8" $4.25
Stepped Through BungsThese bungs are threaded through and contain a .200 thick flange on top.
Part # Thread Pitch Flange Dia Stepped Dia Length Price Each
SSTB14C 1/4" X 20 3/4" 1/2" 1/2" $4.25
SSTB516C 5/16" X 18 3/4" 1/2" 1/2" $4.25
SSTB38C 3/8" X 16 3/4" 1/2" 1/2" $4.25
MSTB516C 5/16" X 18 7/8" 5/8" 1/2" $4.25
MSTB38C 3/8" X 16 7/8" 5/8" 1/2" $4.25
Seat Spring PerchesThese are made of mild steel, coped at one end, and contain a 3/8 dia pin at the other. This pin locates the lower
section of the spring on your sprung solo seat.
Part # Cope dia Price per pair
ssp1 1" $19.50
ssp12 1.25" $19.50
Seat Pan BungsThese bungs have a large diameter to help spread the weight over a larger dia of the pan, made very short to keep your seat riding low.
Part# Thread Pitch O.D. Thickness Price Each
spb516c 5/16" x 18 1" .400" $4.25
spb38c 3/8" x 16 1" .400" $4.25
Tapered Seat Pan BungThese bungs are drilled and threaded at one end and cut at a 20 degree tapper at the other to allow better alignment of the seat spring when
the upper mount on your seat pan is toward the rear bent section of the pan.
Part# Thread pitch O.D. Price Per pair
TSPB516C 5/16 X 18 1" $14.50
TSPB38C 3/8" X 16 1" $14.50
Sprung Seat Front PivotsOur front pivot contains stainless shoulder bolts for a snug fit and bronze oilite bushings for trouble free operation. When used
properly these pivots remove most side to side play found in some sprung seats. This is a weld on kit.
2-Waterjet cut weld on mounting tabs
2-stainless shoulder bolts
2-oilite bushings installed in tabs
selective shims for adjustable preload
1.25 long, .750 OD weld on bung
1.75" overall width
Part # Price Per Kit
SSFP $27.00
Handlebar Weld in Riser SpudsThese bungs are drilled and threaded to accept 1/2" hardware. They are meant to be inserted into .120 wall tubing in either 1"
or 1.25" dia. and welded inside the tubing.
Part # Thread Pitch O.D. Length Price Per Pair
WIRS75 1/2" X 13 3/4" 1.5" $12.00
WIRS1 1/2" X 13 1" 1.5" $14.00
Coped Weld on Riser SpudsThese bungs are coped at one end to your desired diameter and drilled and threaded to accept your handle bar riser bolts.
Part # Thread Pitch Cope Dia O.D. Standoff Height Material Price per pair
CWIRS78 1/2" X 13 7/8" 7/8" 1" Mild Steel $14.00
CWIRS1 1/2" X 13 1" 1" 1" Mild Steel $15.00
CWIRS12 1/2" X 13 1.25" 1" 1" Mild Steel $15.00
CWIRS1SS 1/2" X 13 1" 1" 1" Stainless $22.50
CWIRS12SS 1/2" X 13 1.25" 1" 1" Stainless $22.50
Weld on Pivots BushingsThese bushings contain a mild steel ring with a high temp oilite bushing installed in them. This allows for years of trouble free pivoting
great for making your own foot and hand controls.
Part# Hole Dia O.D. Length Price Each
SWOPB 3/8" 7/8" 3/4" $5.50
LWOPB 1/2" 1" 1" $6.50
Petcock BungsThese bungs will work as factory replacement or in use in custom applications, 3/8 npt for early applications and the 22mm for the late style.
Part # Thread type Overall length O.D. Price Each
NPT381 3/8 NPT 1" 7/8" $4.50
NPT382 3/8 NPT 2" 7/8" $5.50
PKB22F 22MM .5" 1 1/8" $9.00
PKB222 22MM 2" 1" $17.50
Filler Caps and Weld In Bungs
Great for all of your fluid container needs, these come in a variety of materials so check the chart accordingly.
Part # Cap Material Bung Material Vented/Non Vented Cap Dia Price per kit
FCB Aluminum Mild Steel Non 1.5" $20.00
FCBAL Aluminum Aluminum Non 1.5" $23.00
FCBSS Aluminum Stainless Non 1.5" $23.00
VFCB Aluminum Mild Steel Vented 1.5" $25.50
VFCBAL Aluminum Aluminum Vented 1.5" $28.50
VFCBSS Aluminum Stainless Vented 1.5" $28.50
BVFCB Brass Mild Steel Vented 1.625" $47.00
BVFCBAL Brass Aluminum Vented 1.625" $50.00
BVFCBSS Brass Stainless Vented 1.625" $50.00
Oil Tank Bung KitThis kit includes all threaded fittings needed for proper function of an oil tank. This kit contains three 1/8 NPT fittings for your oil lines
(feed, vent, and return). It also contains a threaded filler cap and bung. All weld in parts are available in Mild Steel, 6061-t6 Aluminum,
or 304 Stainless Steel with an aluminum screw in cap.
Part # Bung Material Price Per Kit
OTBK STEEL $30.00
OTBKAL ALUMINUM $33.00
OTBKSS STAINLESS $33.00
Pipe Bomb Oil Tank KitAll the parts you need to fabricate your own custom oil tank for your custom motorcycle, this is a weld together kit for those who don't
mind doing a little welding and grinding themselves and saving some money in the process. The tank holds 3 quarts with room for air
for oil expansion.
• one 8" long section of 5" dia, 14ga mild steel tubing
• two 5" dia 14ga steel domes 2.5" tall
•one oil filler cap and bung
• three 1/8npt bungs
Part # Diameter Price Per Kit
PBOTK5 5" $68.00
PBOTK6 6" $75.00
F' Bomb Oil Tank KitThis is a flat side version of our ever popular Pipe Bomb Oil Tank Kit. This tank also holds over 3 quarts of oil and contains all the fittings
you need to make your own oil tank. This kit is available in either flat sides or flanged ones. Both are 5" in Dia.
• one 10" long section of 5" dia, 14ga mild steel tubing
• two 5" dia 14ga steel end caps
•one oil filler cap and bung
• three 1/8npt bungs
Part # Diameter End cap Style Price per kit
FBOTK 5" Flat $55.00
FLFBOTK 5" Flanged $62.50
Oil Tank End CapsThese caps are for those wanting to make their own round oil tank but do not need one of our complete kits. The end caps come in three
different styles and two diameters. The domed end cap's height is half of their diameter.
Part# Diameter Style Thickness Price Per Cap
DOME5 5" Domed 14GA $9.50
DOME6 6" Domed 14GA $11.25
FEC5 5" Flat 14GA $4.00
FEC6 6" Flat 14GA $5.00
FLEC5 5" Flanged 16GA $6.00
FLEC6 6" Flanged 16GA $7.50
Oil Tank TubingWe offer our oil tank tubing cut to your specified length, both sizes are made from 14ga mild steel. All tube is sold by the inch.
Part # Diameter Price Per Inch
OTT5 5" $2.35
OTT6 6" $2.75
Knurled Foot PegsThese are our universal Knurled foot pegs. They are made from 1" dia solid brass or aluminum and are drilled and tapped to fit 3/8 x 16
hardware on one end and domed at the other . Can be used with our pivots for that extra clean look.
1" Dia
4.5" long
Tapped to 3/8 x 16
Part # Material Price per set
KAFB Aluminum $60.00
KBFP Brass $80.00
Knurled Shifter PegMade from solid brass or aluminum, one end is tapped to accept 5/16 x 24 hardware and domed at the other.
3/4" Dia
2.5" long
Tapped to 5/16 x 24
Part # Material Price Each
KASP Aluminum $17.50
KBSP Brass $22.50
Knurled Jockey Shift HandleMade from solid brass or aluminum, one end is tapped to accept 3/8 x 16 hardware and domed at the other.
Makes for a great shifter handle or passenger peg.
1" Dia.
3.5" Long
Tapped to 3/8 x 16
Part # Material Price Each
KAJSH Aluminum $22.50
KBJSH Brass $27.50
Universal Foot Peg PivotsThese work well when making up your own controls or adapting a custom set. Tapped at either end for 3/8 x 16 hardware,
a pressed in 3/8 pin, and polished for clean looks. Made from stainless steel.
Part# Price per Pair
PMPP $50.00
Rear Master Cylinder Universal MountUsed to mount Wagner style master cylinder to the front of a four speed transmission when making custom forward controls.
Made from 1/4" Mild steel
Water jet Cut
Part # Price Each
RMCM $10.50
Stainless Shifter LinkagesThese shifter links are made with a custom threaded stainless rod and come with all stainless hardware. All heims are industrial
strength for long trouble free operation and good looks.
5/16" Dia center stainless rod
Stainless mounting hardware and jam nuts
Heims load rated to 2100 LBS
Custom Lengths available
Part # Eye to Eye Min Price per kit
SSLMCL 4.0" $45.00
SSLMCE 5.5" $45.00
SSLBGR 11.75" $49.00
Heim JointsCan be used for making your own linkage or to update a factory link to stronger joints. Available in either stainless or chrome plated chrome-moly.
Female 5/16 x 24 thread
5/16" dia eyelet
Part # Material Price Each
SSHJ516 Stainless $10.50
CMHJ516 Chrome-moly $9.50
Fender Strut KitsThese kits include everything you need to make your own custom fender struts for the best style and fit. The pre-bent bars are made extra long
so they can be trimmed down to your desired size. Welding is required. Each kit comes with:
A pair of curved (10" Radius) 1/2" x 19" long solid round bar stock for the uprights or 17" long straight bars
2 5/16" x .75 long counter bored bungs
2 threaded bullet bungs
2 Allen bolts and two hex head bolts
Part # Bar Type Price Per Kit
SFSK Straight $27.00
CFSK Curved $30.00
Motor Mount KitThis kit includes all the materials needed to create a custom motor mount for V-twin motorcycles. Made for SAE head bolt sizes 3/8" (evo and TC)
and 7/16" (Pan, Shovel, and Iron head). Each kit contains:
two counter bored bungs of the correct size to bolt to the heads
two pieces of curved 5/8" or 1/2" dia straight solid round stock that can be trimmed to length
3" long round blind threaded bung tapped to 1/2" x 20
all mock up hardware
Part # Mount Type Motor Type Price Per Kit
SMMKPS Straight Pan/Shovel $20.00
SMMKIH Straight Iron Head $20.00
SMMKETC Straight Evo/TC $20.00
CMMKPS Curved Pan/Shovel $25.00
CMMKIH Curved Iron Head $25.00
CMMKETC Curved Evo/TC $25.00
Jockey Shift Motor Mount KitThis is our jockey shift motor mount kit designed for those looking to make a motor mount with an integral pivot for a jockey shift handle. They are
available for all Harley motor types. Each kit includes the following:
2 counter bore bungs of the correct size for your motor type
3" long center mount tapped to 1/2 X 20 on one side to accept bolt from the chassis tab and tapped to accept a shoulder bolt at the other
weld on pivot with a bronze oilite bushing installed
stainless shoulder bolt and wave washer to reduce play
1/2" cold rolled steel to span the gap between the heads and center mount
2 Socket head cap screws for the heads and hex bolt for the center mount
Part # Motor Type Price Per Kit
JSMMKPS Pan/Shovel $37.50
JSMMKIH Iron Head $37.50
JSMMKETC Evo/TC $37.50
Rubber Tank Mount KitThese mounts are most commonly used for mounting gas tanks and oil tanks. The rubber isolators help reduce the risk of cracks developing in your fluid
container. They use the common flat side tank mount rubbers that can be found at any Harley dealer. The I.D. of the sleeves is 5/16". Each kit includes:
(2) 1/4"thick steel mounting tabs
(4) rubber isolators and sleeves included in full kit
Tabs available individual as well with out rubbers
Part # Price Per Kit
RTMK $24.00
Individual Parts
Part # Description Price Each
RI516 rubber isolator with inner sleeve $2.25
RTMT rubber tank mount steel tab $8.50
Thin Universal Mount KitThese are similar to our universal mounts but by utilizing different hardware we are able to shrink down the overall height. These are used anytime
a lower profile mount is desired.
A kit includes:
2ea threaded bung tapped to 5/16x18 that is .400" tall
2ea countersunk bung that is .350" tall
2ea taper head bolt
when bolted together the set measures .750" (or 3/4") overall with an O.D. of 3/4"
Part # Price Per Kit
TUMK $15.00
Universal Mount KitThese universal weld on mounts can be used to mount just about anything. We commonly use them to mount fenders, oil tanks, and exhaust systems.
Each kit includes:
2 counter bored bungs
2 blind tapped bungs
2 Allen bolts
sold in sizes of either 1/4", 5/16" or 3/8
Part # Thread Size Overall Length Outer Diameter Price Per Kit
UMK14 1/4 x 20 2" 5/8" $14.00
UMK516 5/16 x 18 2" 3/4" $14.00
UMK38 3/8 x 16 2.25" 3/4" $14.00
Brake Stay TabA weld on tab to allow a mount for your brake stay rod, available in either standard or with lightening holes for extra style.
• Weld on tab for your rear brake stay and other uses
• Made from 3/16 mild steel
• 3/8 Diameter hole
• Water jet cut
• Sold Each
Part # Style Price Each
BST Standard $8.00
BSTS W/ Lightening Holes $9.00
Frame Tubing CapsWeld on domed end caps help give a clean look for the end of round tube.
• Full half domes
• Made from 10ga mild steel
• Used to clean up tubing ends
• Available in either 1" or 1 1/4" O.D.
• All are weld in style
• Sold Each
Part # Diameter Price Each
FTC1 1" $5.75
FTC125 1 .25" $6.25
Triumph Axle PlatesGreat premade part if you are making your own loop style chassis.
• Made for 3/4" axle
• Made from 5/16" mild steel
• Water jet cut for minimum distortion
• Reliefs for factory triumph axle adjuster
• All are weld in style
• Sold per pair
Part# Price Per Pair
TAP34 $40.00
British Fender Strut KitThis is a weld together kit with all the parts needed to create your own custom fender strut. Made just for those using a smaller 5" wide fender,
common to Triumph and BSA builds.
The kit includes:
2ea 5/8 O.D. counter bored bungs to fit 1/4" hardware
2ea 5/8 O.D. threaded bungs tapped to 1/4x20
3/8" O.D. cold rolled steel hoop pre-bent to fit a 5" wide fender, made extra long so you can trim to fit
2ea socket head cap screws
2ea hex bolts
Part # Price Per Kit
TFSK $30.00
O2 Sensor BungsThese bungs are for adapting your custom exhaust system to work with your fuel injections factory O2 sensors:
Made of 1018 mild steel
Tapped to fit 18mm x 1.5 O2 sensors used by Harley and other OEM applications
1" O.D. and .500" thick
Sold Each
Part # Price Each
O2SB18 $5.50
Trumpet Exhaust Tips
• Used to add a custom touch to the end of your fabricated exhaust
• Made from 16ga mild steel
• Available in either 1 3/4" or 2" O.D.
• All are weld in style
• Sold Per pair
• Sold In a 10" length with a tip formed on either end
Part # Diameter Price Per set
TET175 1.75" $19.50
TET2 2.0" $22.00
Weld Together T-bar KitThis kit contains all the parts you need to make your own 1" dia. set of T-bars. Simply trim the pre-coped uprights to your desired length, weld in the threaded riser
spuds, and weld on the cross bar to your desired angle. The upper bar is made 32" long and is not dimpled so you can trim them down to your desired width.
Pre-bent 1" x .120 wall mild steel tubing 32" wide
2 pre coped uprights 11" long
2 weld in bungs tapered to accept 1/2" coarse thread hardware
Part # Price Per Kit
WTTBK $49.00
Gusseted T-BarsThese T-bars are built with strength and style in mind. We add gussets to our T-bars for the most demanding of riders which gives extra strength for piece of mind
and good looks. We have heard stories of riders going down at freeway speeds and our T-bars have remained arrow straight. We offer
our T-bars in three different heights if you want a different height T-bar than what we carry, we can make a custom height or pullback T-bar for you. Item
ships 2-5 days from ordering due to the amount of options.
1" or 1 1/4" Diameter
8", 10",12" or 14" Height
7" Pullback, 29" Width
Permit use of factory controls, Internally wired
1 1/4 are stepped down to 1" to fit all controls and housings
Available with or without tach/speedo mounts
Available in raw or powder black
Part # Diameter Height Price per Bar
GTB1 1" 8, 10, 12, 14 $135.00
GTB125 1.25" 8, 10, 12, 14 $165.00
Extra Options Upgrade Cost
Speedo Mount $10.00
Black powder coat $35.00
Dyna Tank Lift 2007 and UpThese Dyna Tank Lifts/Mounts are designed for late model Dynas to give their tanks that ever popular Frisco look. They install in a few minutes most of the time
not even having to change the crossover tube.
Fit 2007 to present Dyna
Made of 1018 mild steel
Powder coated in high gloss black to match your OEM chassis
Available in either a 2" or 2 5/8" lifting height
Part # Height Price Per Kit
DTL2 2" $50.00
DTL258 2 5/8" $50.00 2007 and up
Dyna Tank Lift 2006 and earlierThese Dyna Tank Lifts/Mounts are designed for 2006 and earlier Dynas to give their tanks that ever popular Frisco look. Like all of our bolt on products they
are made to last, built form 3/16 and 1/4" thick steel. They install in a few minutes, some models you will need to lengthen the crossover tube:
Fit 2006 and earlier Dyna
Made of 1018 mild steel
Powder coated in high gloss black to match your OEM chassis
Raises the front mount by 2 1/2"
Part # Price Per Kit
DTLE $50.00
49MM Quarter Fairing Adapter BracketsThese are our Quick Release Dyna Quarter Fairing Brackets for 49mm forks. We supply you with the adapter brackets that will let you install your factory
quarter fairing to a late model 49mm front fork. The HD quick releases are not included but are readily available at your local HD dealer. Fairing brackets
are slotted for a large amount of adjustment.
Made of 1018 mild steel
Powder coated in satin black to match your OEM brackets
Hardware and headlight spacers are included
HD part #57192-05 not included need quantity of 4
Part # Price Per Kit
QFB49 $89.00
Drilled Air Cleaner CoversThese drilled air cleaner covers are fully CNC machined from 6061-t6 aircraft quality aluminum and are offered in three different finishes. These air cleaner
covers can be used for most custom and factory Harleys that have already installed a breather kit (stage 1 kit). At a 7" outer diameter, they hold tight to your
air cleaner to help reduce the overall size, to help increase air flow and good looks they are drilled and chamfered all the way around the radius.
The hard black anodized covers will not fade from the sun and turn purple like the standard black anodize that some others use .
Made of 6061-t6 aircraft aluminum
3/16" thickness through the entire shell
7" outer diameter
Drilled and Chamfered 360 degrees around with 5/8 holes
Available in a brushed finish for $139.00
Available in polished or hard black anodize with highlight for $179.00
Part # Finish Price Each
DACC Brushed $135.00
DACCP Polished $179.00
DACCBA Black Anodize $179.00
Fox Suspension Seat
This is our suspension seat equipped wit a Fox Float air shock. The seat suspension allows 2.5" of adjustable dampened travel. Unlike most sprung seats that
tend to buck you off the seat after a big bump, our seat set up with adjustable rebound can be adjusted to slow the seat down so it will feel like you are
riding a bike with rear suspension not a rigid. The shock available now is the Fox Float; the coil over pictured is no longer available. With the air
shock pressure in the shock can be adjusted to adjust for rider weight and greater tuning of the suspension. This is a weld in kit, some modifications
to the frame may have to be made:
Water jet cut weld on mounting tabs
All pivot points are equipped with oilite bushings and stainless shoulder bolts for long life
Kit includes our Front Seat Pivot
Seat pan not included
Fox Float shock
Part# Price per Kit
FSSK $549.00