www.snowprotect.com

Steel Roof? Falling Snow and Ice?

Hold back the dangerous avalanche of sliding snow and

ice with one of Snow Protect’s Snow Retention Systems!

Snow Stopper Fence andSnow Stopper Block

DANGER: Snow and Ice build-up about to come crashing down

SOLUTION: Snow and ice held back by the Snow Stopper Fence

Snow Protect: Snow Pro I & Snow Pro II

Vent Protect

Snow and ice sliding off metal roofs can injure people, harm landscaping, bend gutters, destroy air conditioning units and dent vehicles. Snow Protect products can hold back the avalanche of snow and ice - allowing it to melt naturally and safely.

The newest Snow Protect product, the Snow Stopper fence, is the ultimate in snow and ice blocking devices.

Snow Protect’s special formulated plastic brackets mount onto the roof and hold square aluminum tubes which connect with adjustable spacers. This design is incredibly easy to install, simple to align and looks architecturally clean.

• Protects people, landscaping, gutters, Ac units and vehicles from falling snow and ice

• Made with our special formulated high-strength plastic with UV protection to prevent fading

• Screw holes are molded in

• easy installation with adjustable design

• Architecturally clean, straight lines

• Strength testing results available on our website: www.snowprotect.com

• Available in several color options

Dangerous snow and ice buildup without the Snow Stopper Fence

With the Snow Stopper Fence!

On higher pitched roofs or where additional retention of snow and ice is needed, the Snow Stopper Block is the answer. Adding the Snow Stopper Block between the supports of the Snow Stopper fence provides extra protection from sliding ice and snow.

Made from an aluminum extrusion and powder coated to match the rails and supports, the Snow Stopper Block easily slides into place between the supports and is secured with two self drilling fasteners.

Before

After

In colder climates, weather can be very unpredictable. One day, snow and ice is accumulating on your metal roof; the next day, the warmth of the sun starts to melt that snow and ice making it slide down the roof- creating a dangerous situation for anyone or anything in it’s path.

To hold back the snow and ice, and preventing an avalanche effect from overhead, Snow Protect offers a low cost safety addition for lower-pitched metal roofs in cold climates.

Each Snow Protect snow guard has holes molded in and a “waffle” design molded into the bottom which

strengthens the bond of the adhesive to the roof.

In addition to the standard clear snow guard, several UV protected colors are available along with matching screws. Once installed, they become practically invisible as they blend into the roof color.

• Protects people, landscaping, gutters, Ac units and vehicles from falling snow and ice

• low cost safety addition for lower-pitched metal roofs or smaller areas

• Made with our special formulated high-strength plastic with UV protection to prevent fading

• “Waffle” base for superior adhesion

• Screw holes are molded in

• easy install with Manus Bond 75A and self-piercing screws

• Strength testing results available on our website: www.snowprotect.com

• Available in clear plus other color options

Base Width 2” Length 4”, Height 3.25”

Base Width 3.5”Length 4”, Height 3.25”

www.snowprotect.com

231-744-2092

Clear Evergreen

Mansard Brown

Award Blue Fire Engine Red

Colonial Red

Additional custom colors available but may require a minimal color match charge.

1500 Whitehall Rd., Ste. 1Muskegon, MI 49445

(231) 744-2092 * Fax (231) 744-5829email: info@snowprotect.com

www.snowprotect.com

• Vent Protect breaks up and redirects snow and ice before it reaches the vent

• Made from our special formulated high strength plastic with UV protection to prevent fading

• “Waffle” base for superior adhesion

• Screw holes are molded in

• Strength testing results available on our website: www.snowprotect.com

• Available in clear plus other color options

Broken vents can be annoying, dangerous and sometimes quite expensive to repair or replace. A low cost solution to preventing broken vents is to install Vent Protect.

The support arm on Vent Protect serves a dual purpose - to hold the vent in place and, along with the anchor foot, to break up and redirect snow and ice as it slides down metal roofs. Vent Protect is easy to install using Manus Bond 75A. Fastening with screws in addition to Manus Bond 75A makes Vent Protect even stronger.

Easy to install and economical, it just makes sense to protect your vents with Vent Protect.

Before

After

Specifications, descriptions and illustrative material in this literature are as accurate as known at time of publication, but are subject to change without notice. Snow Protect, Vent Protect, Snow Stopper Fence, Snow Pro I, Snow Pro II ProSno Breaker and Snow Deflector are trademarks of Snow Protect, Inc. Copyright © 2010 Snow Protect, Inc.Printed 1/2010

PRSRT STDU.S. Postage

PaidPermit #336

Muskegon, MI

More Snow Protect Products

Clear Evergreen Mansard Brown

Award Blue Fire Engine Red Colonial Red

Additional custom colors available but may require a minimal color match charge.

A. MANUS BOND 75A - Tested and proven, we recommend Manus Bond 75A as the strongest bonding adhesive.

B. ISOPrOPyl AlcOhOl rUBS - Perfect for cleaning metal roofs and recommended for optimal adhesive bonding. (Box of 100)

c. rOOfINg Sheeter ScreWS - Available in matching colors.

D. Self-DrIllINg ScreWS - Makes installation easy, stainless steel.

visit www.snowprotect.com for more information

A. B.

D.c.