steel limited - gmceogmceo.co.za/portals/9/aciadms/docs/temp/kiveton park steel... · to bs en iso...
TRANSCRIPT
Welcome
Steel Limitedjour supply:p8.rtner In stoel
E::3ienvenuto
Founded in 1922
The company is a quality manufacturer of bright engineering
steel bar and wire, accredited for making products required in
the Automotive (ISO TS 16949), Aircraft (AS EN 9100), Cold
Forming and Machined Parts industries (ISO 9001).
Kiveton Park Steel is the specialist in bright drawing and heat
treatment of Alloy and Carbon Engineering steels with full
Quality Control at each process stage, including 100% non
destructive testing through Uitrasonic and Surface Defect
Detection.
Located close to Sheffield, England, which is the
birthplace of steelmaking, the company is ideally located for
all major road, rail and sea ways.
The company operates a progressive heaith & safety policy with
award winning initiatives and is committed to continuousimprovements in environmental performance, having approvalto BS EN ISO 14001.
r KIVETON PARK STEELLIMITED
The key objectives for Kiveton Park Steel are to provide a quality
product backed by excellence in customer service.
Kiveton Park Steel is the major subsidiary of Kiveton Park
Holdings, which has interests in steel processing, intemationaldistribution and trading.
InformationFacilities
InformaCion de los productosPr( luktip'c n. ~tlC ) r- .'i '"
Infc,' IO! '" I". prnc '.: j
Kiveton Park Steel has a
wide range of production
facilities, on one site, for the
production of round and
shaped section wire and bar
in a variety of carbon,
engineering and alloy steels.
r KIVETON PARK STEELLIMITED
Kiveton Park, Sheffield 826 6NQ United Kingdom
Tel: +44 (0)1909 770252 Fax: +44 (0)1909 772949
Email: [email protected] www.kpsteel.co.uk
Please see the reverse of this note to view a comparison ofequivalent international standards for material composition, inaddition to which, the company has an exclusive range of heat
treatable alloys traded under the name "HYKUT" with improved
machinability characteristics. Where customers require very straight,
stress free products the company has also developed specific
processes to meet these very demanding applications.
In many instances Kiveton Park Steel works closely with both raw
material sources and end users to develop bespoke specifications
covering special steel analyses and processes / process controls toestablish unique supply chains for critical products.
The facilities listed below provide details of the installed capacity
which is also available for the hirework of standard or special
materials including stainless steels and nickel alloys.
Preparation - Incoming and interstage heat treated coils of rawmaterial or wire are cleaned chemically and coated with Lime, Borax,Phosphate, Stearate or Bonderlube ready for the next stage of
production. Incoming hot rolled bars are shotblasted and in line
lubricated.
Heat treatment - Materials can be spheroidise or machinability
annealed, normalised, using atmosphere controlled or batch
methods, hardened & tempered and/or stress relieved.
Wire drawing - Coils up to 3 tonnes, 4.50 - 35.00mm round or
equivalent shapes.
Cutting to length - Spinner straightening and cutting to length for
round wires up to 35mm. Shaped wires in the equivalent round
range 5 -16mm can be cut to length from coils.
Bar drawing / reeling - Up to 75mm in rounds or equivalent crosssection shapes.
Grinding - Precision grinding available across full range,4.50-75mm.
Short lengths - Available using sawing or cropping equipment to
precise tolerances.
Chamfering - One or both ends, 8 - 60mm or equivalent rounds.
Crack detection - In or offine for bars, 7 - 70mm or equivalent
rounds, in line only for coils.
Ultrasonic testing - An offine process, including crack detection
and laser measurement for bars in the range 7 - 50mm or
equivalent rounds.
National/
TYPE 9/0(TYPE 9/1)TYPE 1011
TYPE 9/3TYPE 9/3TYPE 10/2
230M07 (230M07L) EnlA (EnlA + Pb)24QMQ7 (240M07L) En18 (EnlS + Pb)210M15 En32M
212M36 (212M36L) En8M (EnBM -+- Pb)212M36 (212M36L) En8M (EnBM + Pb)225M36 (225M36L)226M44 (226M44L)216M44 (216M44L)
637M17 En352655M13 En36A805M20 En362815M17 En353
040Al0 En2A,En2Al1,En28TYPE 0/3
040A10 + S range En2A,En2Al1 ,En2B + S(040A15) TYPE 0/3(040A15 + S range)040A15 + 8 range
TYPE 0/4080A35 En8A(080M36)
TYPE 1/2(080M36 + 8 range)060A40 (080M40) (EnS)(080M40 + 8 range) (EnS +8)060A45 (08OM46)
TYPE 113(080M46 + 8 range)080M50 En43A080M50 + S range En43A +8(070M55) (En9)
85970 I BS3~1~11,- _
BS970"95:.:5,-_~-.:==BS3:::=~11;.:...'TYPE 2/1
EUROPEAN NORMS
37tv10238Cr24602170334Cr437Cr441Cr4 (41CrS4)
25CrM04 (25CrM0S4)34CrM0437CrM0442CrM04 (42CrM0S4)51CrV434CrS452SiCrNi560SiCr8
34CrNiMo630CrNiMo8
1782 (1882)23823882
17Mn84 (18MnB4)20Mn85 (20MnB4)36MnB416MnCr5 (16MnCrSS)
11SMn30 (11SMnPb30)11$Mn37 (11Stv1nPb37)15SMn13
35820 (35Pb20)36SMn14 (36SMnPb14)3~n28(3~nPb28)
44SMn28 (44Stv1nPb28)46820 (46SPb20)
16NiCrS415NiCr132ONC<MoS2-217NiCrt\.1oS6-441NiCrMo7-3-2
C10C10E2CC1QRC15 (C15C)C15RC16 (C16R)C20C (C20E2C)C35C35EC35EC (C35RC)C35RC40 (C40E)C4QRC45C45E (C45EC & RC)C45RC50C50E(C50R)ceo
85970 latest edition
530A4Q
708A25 ... S range
70BM4Q -+- S range5OCrV4 (735A50)(530A32/530A36)
685 ASS
(817M40)
En180
EnlgA +$En47(En188/En18C)
En48A
(En24)
lYPE311TYPE 3/2
TYPE 5/1TYPE 5/2
SAE/AIS!
4037(5140)(5145)1515,15205135
(5140)
4135413741406150(5132, 5135)
9254
1522
1214
1117
1139 (11L39)1137 (11L37)
11441146 (11L46)
8620
4340
1010101010101015101510161020103510351034103510401040104510451045105010501060
Equivalent specffications may not be identical to the European grade (or even to each other) but are the nea'eslDetails of 'HYKUT" range and Aerospace Stoos available on application.The above chart lists the standard grades lNhich are in addition to the bespoke customer speciflC gradesproduced by the company.Please ask the Sates Team for offers lor any grades not listed.
The company has many specific customerapprovals in addition to the third partyaccreditations listed below.
lSOITS 16949TSOOO8Q
ISO 14001EMS 5241 1
as EN 9100FM 96156
Cold FormingOeforrlad6n r
r(a c
Kallstukning och kall'ormning
Kiveton Park Steel has a long
established history in the
supply of Cold Heading
Steels for the Fastener
Industry and other
specialised Cold Forming
applications in Bearings,
Automotive and many
general components
including Push Rods and
Transmission Chains.
rKIVETON PARK STEELLIMITED
Kiveton Park, Sheffield 826 6NQ United Kingdom
Tel: +44 (0)1909770252 Fax: +44 (0)1909772949
Email: [email protected] W\N'IN.kpsteel.co.uk
Steel types include most American, European and British Standards
ranging from the more basic low carbon steels through to Nickel
Chromium- Molybdenum steels. Material selection and strict process
controls ensure the products are renowned for their quality,
performance and consistency.
For Bearing Grade Steels the raw material is manufactured to special
steelmaking practices, ensuring a highly consistent product in terms
of cleanliness, chemical composition, surface integrity and
homogeneity. Kiveton Park Steel is an approved supplier to many of
the best known global bearing manufacturers.
Kiveton Park Steel has a number of Batch and Continuous
Atmosphere Controlled Furnaces providing various process
conditions including Spheroidise Annealing and Hardening &
Tempering and in -line or off -line surface or sub surface defect
testing can be employed to confirm product integrity.
A variety of surface coatings are available to meet specific
customer requirements and cut lengths or bar throughout the full
company size range can be supplied in the ground condition for
special applications.
Wire in coil is produced in the range 4.50 - 35.00mm dias all of which
can also be supplied straightened and cut to length with sawn or
cropped shorter lengths available if required. Bar is available up to
75mm dia, typically in 3 - 6 metre lengths but longer
or shorter pieces are available if necessary. Shaped
Sections are produced, typically in Squares,
Hexagons or Octagons but other shapes have
been specially developed meeting
unique customer demands.
Cold Heading
K I
t t
q
f< t mf< lrrY>en
11-. fC'11r
'. )
Diameter Range• Coils
Bar
3.00 - 35.00mm(or st~aightened and cut to length)
8.00 - 75.00mm(inclujing ground finish)
MaterialsMild Steels (including Boron and / or Manganese)
Carbon Steels
Alloy Steels(typically including Chrome and/or Nickel and/or Molybdenum)
(see Facilities sheet for International Specifications)
ConditionAs Drawn
Spheroidised Annealed
Inter Annealed
Inspection, Full Mechanical and Analytical servicesHardness
Charpy
Tensile Testing
Surface Defect
Laser Gauging
Ultrasonic Testing
Macro and Micro Examination
In addition to many customer approvals,Kiveton Park Steel has third partaccreditations covering Aerospace,Automotive and Environment which aredetailed below. r KIVETON PARK STEEl
LIMITED
IsonS 16949TSoooao
ISO 14001EMS 52411
BS EN 9100FM 96156
Kiveton Park, Sheffield $26 6NQ United Kingdom
Tel: +44 (0)1909770252 Fax: +44 (0)1909772949
Email: [email protected] www.kpsteel.co.uk
F-Jadert IIverkare
Fabricants de res' arts
MollificiFabricartes de muelles
FederherstE ' r
Square section bar is available in both the annealed and
drawn condition and hardened & tempered condition in
a variety of materials.
Special procedures developed through years of experience
ensure all products are protected from any damage due to
mishandling. The operations team within Kiveton Park Steel works
closely with both customers and suppliers to develop
comprehensive supply specifications to provide a quality assured
product with a full service package.
Typical grades supplied are Chrome, Chrome Vanadium, Silicon
Chrome and Silicon Chrome Nickel to European, American and
British Standards with bespoke variations if required. In - line surface
defect testing is used extensively to help eliminate the risk of harmful
surface defects in the finished products.
Kiveton Park Steel provides Spheroidise Annealing through a
continuous atmosphere controlled fumace giving consistency in
cold coiling performance with minimum decarburisation.
Where necessary customised stocks of finished or part finished
material are held to meet the service requirements in the supply
chain schedules.
Wire is supplied in coils in diameters up to 35mm and can also be
supplied spinner straightened and cut to length throughout the
....... range. Bar is available up to 75mm dia and can be supplied
in the ground condition with additional off - line ultrasonic
inspection for more sensitive applications.
Kiveton Park Steel
manufactures a
comprehensive range of wire
and bar in round and shaped
alloy and engineering steels
for the manufacture of hot
and cold coiled springs for
critical applications.
~KIVETONPARK STEELLIMITED
Kiveton Park, Sheffield $26 6NQ United Kingdom
Tel: +44 (0)1909 770252 Fax: +44 (0)1909 772949
Email: [email protected] lNINW.kpsteel.co.uk
Mol ',IF t' tE S d ' ~ 0
F t' G nlsC'E
Size RangeCoils
Bar
3.00 - 35.00mm(including Straightened & Cut to Length)
6.00 - 75.00mm(including equivalent round shaped sections)
MaterialsCarbon Steels
Silicon Chromium Nickel Steels
Silicon Chrome Steels
Chrome Vanadium Steels(see Facilities sheet for International Specifications)
ConditionAs Drawn
Finally Spheroidised Annealed
Inter Annealed
Hardened & Tempered
Stress Relieved
Ground etc.
Inspection, Full Mechancal and Analytical ServicesHardness
Charpy
Tensile
Surface defect
Laser Gauging
Ultrasonic test
Macro and Micro Examination
The company has many specific customerapprove/s in addition to the third partyaccreditations listed below. r KIVETON PARK STEEL
LIMITED
ISOITS 16949TSoooao
ISO 14001EMS 52411
BS EN 9100FM 96156
Kiveton Park, Sheffield 826 6NQ United Kingdom
Tel: +44 (0)1909 770252 Fax: +44 (0)1909772949
Email: [email protected] www.kpsteel.co.uk
MachiningPrecisionsbearbl to 9
PrazislCJI lsbearoel,el 1
Decolletaqe 01 JSir'l j p Jon
Tornitura Oi PreCISIOrCalibrado de precision
Strategic stocks of finished or part processed materials are held
to support contract supply chain business and the Customer
Service Team will provide a tailored service for individual customers.
Bright Bar in round or shaped sections is supplied in the range
4.50 - 75.00mm equivalent round with various Batch or Continuous
Atmosphere Controlled heat treatment processes to provide
Spheroidise Annealing, Normalising, Hardening & Tempering and
Stress Relieving. Further processes on site include Reeling, Grinding,Chamfering, sawing, Cropping and both in-line and off-line surface
defect detection equipment.
For more sensitive applications, Kiveton Park Steel has invested in off
line Ultrasonic Inspection for sub surface defects with crack detection
and laser measurement also included in that final process facility.
Alloy and Engineering steels can be supplied to most European,
American and British Standards. Where required the company will
provide full technical liaison with both customers and steelmakers
1}~r~~l\to develop bespoke specifications for specific applications.I Kiveton Park Steel has an exclusive range of "HYKUT" alloys
with increased fatigue properties and improved machinability
(see separate product infonnation sheet).
In addition to Bar the company can provide Wire in Coils up to 35mm
dia which can also be Spinner Straightened and Cut to Length for
applications demanding very straight products. A Cut to Length facility
is available for shaped sections originally produced in coils.
All operations are on one site and are available, on a Hirework
basis, for an extensive range of materials including Stainless
and Nickel Alloys.
Kiveton Park Steel is
recognised as a specialist
quality manufacturer of heat
treated steels for engineeringapplications including
Automotive, Aircraft, Power
Tools, Masonry and Stone
Drills, Railway Parts and
many other challenging
specifications.
r KIVETON PARK STEELLIMITED
Kiveton Park, Sheffield 526 6NQ United Kingdom
Tel: +44 (0)1909 n0252 Fax; +44 (0)1909 n2949
Email: sales@kpsteeLco,uk WNvV.kpsteel.co.uk
T 1 IL
F< nqo cJe ')ro Jcto<'
Kiveton Park Steel is a quality manufacturer ofbright engineering steel bar and wire in coils orcut lengths for the following principal applications
Machining Precision turned parts
Cold Forming Fasteners, auto components, bearings
Coiling Springs
Hirework of customers own material available on demand
In the following conditionsAs Drawn Hardened and Tempered
Precision Ground Drawn to Specific MechanicalNormalised Properties
Spheroidise Annealed Surface Defect TestedMachinability Annealed (Eddy Current)Stress Relieved Intemal Defect Tested (U~rasonic)
End conditionsCropped (including short lengths)
Sawn
Chamfered
Faced square
In steel gradesCarbon
Freecutting (including leaded)
Alloy grades containing Cr, Ni, Mo, V etc
HYKUT series, exclusive to Kiveton Park Steel Limited
Aircraft Steels - Air me~ed, Electro Slag Re-me~ed (ESR),Vacuum Arc Re-me~ed (VAR)
Stainless and Nickel alloys
Size range
Rounds in coils or straightened & cut to length 3.0 to 35mmdiameter Bar from 3.0 up to 75mm diameter
Hexagons, Octagons, Squares and other shapes available
) J;l ta
Qualitat - Die erste Prioritat
Leading the field in terms of quality recognition,Kiveton Park Steel Limited specialises in thecontrol of surface and internal defects
On / Off - line surface defect testing for wire in coils anddrawn bar
100% Automatic U~rasonic testing
A comprehensive range of in-housetesting facilities, including
Mechanical testing (tensile/hardness, etc)
Microscopic evaluation of structural and surface conditions
Non-destructive testing to control defect depth and internaldefects
Crack detection - Eddy CurrenVEncircling Coil
U~rasonic testing to BS EN 4179/NAS41O/SNT-TC-1A
Chemical analysis determination
3rd Party Accreditations
ISOrTS 16949TS 00080
ISO 14001EMS 52411
as EN 9100FM 96156
General approvals from our customers, includingBlack and Decker INA Bearings
Delphi Diesel Systems NSK Bearings
Federal Mogul SKF
Lemforder ZF TRW
Aircraft industry approvals, includingAirbus UK
Raytheon
Rolls Royce SABRe
Westland
Quality... in Customer Service
Kiveton Park Steel's customers depend on supplies being received
on time and in full with ftexibility in the management of scheduled
requirements which are often volatile.
The Customer Service, Planning and Logistics Team arecommitted to provide a bespoke service on a personal level, whichcan be relied upon to meet individual customer requirements.
JP'"
Calibrado de precisil n
Precisionr '- 1
r e, t E +E r
Diameter RangeCoils
Bar
3.00 - 35.00mm(or Straightened and cut to length)
8.00 - 75.00mm(including Ground Finish and Chamfering)
Materials, Carbon and alloy steels, including
Manganese Chrome Freecutting Steels
Chrome Nickel Tool Steels
Chrome Nickel Molybdenum High Speed Steels
Carbon Chrome Stainless & Alloy (on applicatIOn)
Chrome Vanadium HYKUT(see facilities sheet for more International Specifications)
Cond~ion
As Drawn
Inter Annealed
Spheroidise Annealed, or Normalised
Hardened & Tempered
Stress Relieved
Reeled, Precision Ground etc
Inspection - Full Mechanical and Analytical Services
Hardness
Charpy
Tensile
Suriace Defect
Laser Gauging
Ultrasonic Testing
Macro and Micro Examination
Kiveton Park Steel has many speaficcompany approvals from globalmanufacturers in Aerospace, Automotiveand Bearings and others. Details of thirdpart accreditations acknowledging thecompany quality reputation are listed below.
KIVETON PARK STEELLIMITED
rsorrs 16949TSOOO8O
ISO 14001EMS 52411
BS EN 9100FM 96156
Kiveton Park, Sheffield 526 6NQ United Kingdom
Tel: +44 (0)1909770252 Fax: +44 (0)1909772949
Email: [email protected],uk W'N'W.kpsteel.co.uk
1. Commercial Offices 6. Bar Finishing I Offline NOTlUIS Testing 11. Covered Raw Material Storage
2. Works Offices 7. Bar Drawing 12.Cleaning & Coating
3. Warehouse 8. Cutting to the Length I Grinding 13.Batch I Continuous Heat Treatment
4. Engineering Centre 9. Wire Drawing 14.Technical Centre
5. Wire Drawing 10.Coil-Bar Drawing 15.Weighbridge I Security
/
9Sl96lf'l:lOO~6 N3 S8
I~~. \~I
OBOOOSl6\769 ~ SlJOSI
0:3
1331S }I~Vd NO
/