steam cracker furnace energy improvements tim gandler energy coordinator baytown olefins plant,...
TRANSCRIPT
Steam Cracker Furnace Energy Improvements
Tim GandlerEnergy Coordinator
Baytown Olefins Plant, Baytown Tx
2010 Industrial Energy Technology Conference
May, 2010
Page 2
• Baytown Complex
• Steam Cracking to Olefins
• Furnace overview & challenges in steam cracking
• Energy efficiency improvements
Overview
Baytown Olefins Plant
Page 3
Baytown Complex
•One of world’s largest integrated, most technologically advanced petroleum/petrochemical complexes
•~3,400 acres along Houston Ship Channel, ~ 25 mi. east of Houston
• Includes 4 manufacturing sites, 2 technology/engineering offices
•Significant community involvement
Baytown Refinery
Page 4
Steam Cracking to Olefins
• Process 60+ years old; ExxonMobil one of pioneers
• Endothermic, non-catalytic process to produce light olefins/diolefins – Ethylene, propylene, butylenes, butadiene
• Molecules “crack”, large → small – C2H6 → C2H4 +H2
– C3H8 → C2H4 +CH4
– C3H8 → C3H6 +H2
– Many others……
• Must heat feed to very high temperature to adequately “crack”– The lighter the feed the higher the temperature
• Very energy intensive process; furnace fuel accounts for ~60% of plants energy use
Ethylene Plant Energy Consumption
60%
5%
35%
FuelSteam Power
Quench & Heat Recovery
Steam Cracker Furnace
Compression Refrigeration Fractionation
Cracked Products
ProductsFeed
Fuel
Page 5
Furnace Overview
1. Convection Section– Preheats and vaporizes the feed by absorbing excess heat– Combines the hydrocarbon with dilution steam
2. Radiant– Cracks the feed into products at short residence times– Contains the burners – 1500+ °F
3. Heat Recovery – Arrests the cracking reaction by cooling the effluent– High pressure steam generated
Feed
ID Fan
Flue Gas
Gas Burners
1. ConvectionSection
2. RadiantSection
3. Heat Recovery
Page 6
Challenges in Steam Cracking – Dilution Steam
• Reduces partial pressure of hydrocarbon, resulting in higher C2= yields
• Helps keep free radicals from recombining into undesirable compounds, e.g. coke, methane, hydrogen
• Requires additional firing
Furnace
Cracked Products
Feed
Fuel
Dilution Steam
Page 7
Challenges in Steam Cracking - Coke Formation
• Coke is a undesirable byproduct of steam cracking formed from complete dehydrogenation of hydrocarbon molecules
• Thickness of coke layer increases with run length– Reduces heat transfer to process stream
• After a period of being online furnaces “Decoke” with steam+air due to– High pressure drop
– High tube wall temperatures
Furnace tube
hydrocarbon + steam
0
0.2
0.4
0.6
0.8
1
1.2
1 2
time
Co
ke
lay
er
Page 8
Steam Cracker Furnace Energy Efficiency
• Overall energy efficiency of furnace depends on – Run length or % of time furnace is online (more decokes lead to lower efficiency)
– Amount of dilution steam (more steam leads to lower efficiency)
– Furnace design
– Furnace condition
• Very challenging to balance energy efficiency and production
down
online
time
Fu
rnac
e st
atu
s
Page 9
Energy Efficiency Improvement - How did we do it?
• Multi-disciplinary team identified monitoring, procedural and maintenance improvements
– Team met weekly to review performance and create run-plan– Improved procedures resulted in greater attention to details– Maintenance improvements executed as planned
• Gaps closed over 1-2 year period
• No capital spending required
Review Performance
Create Run-plan
Execute Run-plan
Page 10
BOP Furnace Energy Efficiency Improvements
• Overall energy efficiency improvement of 2.4%– Significant improvements in run length– Significant improvements in S/HC
• Energy Savings of 660,000 MBTU/yr or more than 38,000 T/CO2 per year
• Site remains dedicated to further improvements in energy efficiency
last year this year next year future
En
erg
y E
ffic
ien
cy