state of the art automatic lubrication …...automatic grease lubrication • viton® o-rings...

2
1 COPLEY PARKWAY, SUITE 104, MORRISVILLE, NC 27560 (800) 631 0168 TOLL-FREE (919) 465 4448 LOCAL (919) 465 0516 FAX STATE OF THE ART AUTOMATIC LUBRICATION SYSTEMS FOR ANY SAW MILL APPLICATION Stationary equipment used in lumber and wood operations are exposed to tough environments including sawdust, moisture, heat and continuous operation. Utilizing automatic lubrication increases uptime by protecting bearings and other components. Keep bearings cool and reduce fire risk by properly lubricating your bearings with a steady flow of lubricant. Automatic lubrication can prevent corrosion in equipment exposed to outside elements by preventing water from forming in the bearing. Lubricate while your equipment is running and increase safety by eliminating the need for operators to be within the work zone. No sophisticated controls required. Fully stand alone with on-board control or ties in to your existing controls. Increased output and production up-time. Optional automatic refill. An IMCI Company Improve Saw Mill Performance & Increase Profits with Automatic Lubrication For more information about this product, please contact us at (+1) 800-631-0168 or [email protected]

Upload: others

Post on 28-Jun-2020

3 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: STATE OF THE ART AUTOMATIC LUBRICATION …...Automatic Grease Lubrication • VITON® O-rings standard on all valves and injectors to protect against high heat and synthetic lubricants

1 COPLEY PARKWAY, SUITE 104, MORRISVILLE, NC 27560 (800) 631 0168 TOLL-FREE (919) 465 4448 LOCAL (919) 465 0516 FAX

STATE OF THE ART AUTOMATIC LUBRICATION SYSTEMSFOR ANY SAW MILL APPLICATION

• Stationaryequipmentusedinlumberandwood

operationsareexposedtotoughenvironments

includingsawdust,moisture,heatandcontinuous

operation.Utilizingautomaticlubricationincreases

uptimebyprotectingbearingsandothercomponents.

• Keepbearingscoolandreducefireriskbyproperly

lubricatingyourbearingswithasteadyflowof

lubricant.

• Automaticlubricationcanpreventcorrosionin

equipmentexposedtooutsideelementsbypreventing

waterfromforminginthebearing.

• Lubricatewhileyourequipmentisrunningand

increasesafetybyeliminatingtheneedforoperators

tobewithintheworkzone.

• Nosophisticatedcontrolsrequired.Fullystandalone

withon-boardcontrolortiesintoyourexisting

controls.

• Increasedoutputandproductionup-time.

• Optionalautomaticrefill.

An IMCI Company

Improve Saw Mill Performance & Increase Profits with Automatic Lubrication

For more information about this product, please contact us at (+1) 800-631-0168 or [email protected]

Page 2: STATE OF THE ART AUTOMATIC LUBRICATION …...Automatic Grease Lubrication • VITON® O-rings standard on all valves and injectors to protect against high heat and synthetic lubricants

WWW.BIJURDELIMON.COM 36976 • R0 • 08/16

Automatic Grease Lubrication

• VITON®O-ringsstandardonallvalvesandinjectorstoprotectagainsthighheatandsyntheticlubricants.

• Easytoassembleandreplacevalveswithoutremovingtubing.

• Zinc-Nickelplatingstandard-1000hoursaltspray.Stainlesssteelalsoavailable.

• Thesystem’sdistributionlinesaretotallysealedfrompumptoinjector,meaningdirtorsawdustwillnotcontaminatethelubricant.Bymaintainingcleanoilorgreaseinthesystemreservoiryoucanensuremaximummachineryprotection.

• Theadjustableinjectorsmakeiteasytofinetunethesystem.Injectorscanoftenbeadjustedorreplacedbetweencycles,meaningsimplemaintenancetaskswon’tinterruptoperation.

PROVEN QUALITY, RELIABILITY AND ACCURACY.

M2500G Block Standard with Zinc Nickel Coating

FL Injectors (Available in SS)

Dynamis Maxx with Controller

MultiPort Pump

TO LUBE POINTS

BIJUR DELIMON

BIJUR DELIMON

BIJUR DELIMON

15S

25S

40TP

BIJ

UR

DE

LIM

ON

BIJ

UR

DE

LIM

ON

BIJ

UR

DE

LIM

ON

CYCLESWITCH

MASTERVALVE

MANUAL ZERKOVERIDE/FILL/TEST

TO L

UBE

POIN

TS

TO LUBE POINTS SECONDARY

VALVES

PRESSUREGAUGE

LINESTRAINER

ELECTRICGREASE

PUMP

LOW LEVEL SWITCH

CONTROLLER