standarddrawingsforroadworkstableofcontentsoct2010rev11final

VicRoads Supplement Standard Drawings for Roadworks – Table of Contents

SD Table of Contents – Rev. 1.1 – Oct 2010

VicRoads Supplement

Standard Drawings for Roadworks

(Table of Contents) NOTE: This VicRoads Supplement must be read in conjunction with the Austroads Guide to Road Design. Reference to any VicRoads or other documentation refers to the latest version as publicly available on the VicRoads website or other external source.



VicRoads Supplement Standard Drawings for Roadworks (Table of Contents)

Updates Record

Rev. No. Date Released

Section/s Update

Description of Revision Authorised By

Rev. 1.0

July 2010

All sections Update of references to RDG, RDNs, layout, general editing and headers and footers

ED – Network & Asset Planning

Rev. 1.1

Sept 2010

Various Updates, addition (SD2064, SD2065, SD2066, SD2091-reissued) and withdrawal (SD2061, SD2062, SD3611, SD3621, SD4082, SD3181-temporarily) of standard drawings.

Table of Contents – Addition of notes and references on SDs.

Principal Advisor - Road Design, Traffic & Standards

COPYRIGHT © 2010 ROADS CORPORATION.

This document is copyright. No part of it can be used, amended or reproduced by any process without written permission of the Principal Road Design Engineer of the Roads Corporation Victoria.

ISBN 978-0-7311-9164-2

VRPIN 02676

This VicRoads Supplement has been developed by VicRoads Technical Consulting and authorised by the Executive Director – Network and Asset Planning.

The VicRoads Supplement to the Austroads Guide to Road Design provides additional information, clarification or jurisdiction specific design information and procedures which may be used on works financed wholly or in part by funds from VicRoads beyond that outlined in the Austroads Guide to Road Design guides.

Although this publication is believed to be correct at the time of printing, VicRoads does not accept responsibility for any consequences arising from the information contained in it. People using the information should apply, and rely upon, their own skill and judgement to the particular issue which they are considering. The procedures set out will be amended from time to time as found necessary.



VicRoads Supplement – Standards Drawings for Roadworks Changes to the Standard Drawings are as indicated in the following table.

Any reference to any document or Australian or New Zealand Standard (AS/NZS) refers to the latest version as publicly available on the VicRoads website or other external source.

PRESCRIBED REFERENCES

1. VicRoads Standard Drawings for Roadworks (refers to the latest version available on VicRoads website)

2. VicRoads Standard Specifications for Roadworks and Bridgeworks

3. RDNs – Road Design Notes (refers to the latest version available on VicRoads website)

4. AGRD – Austroads Guide to Road Design (Parts 1 – 8)

5. VRS – VicRoads Supplement to the Austroads Guide to Road Design (available free at VicRoads online Bookshop)

6. AGPT – Austroads Guide to Pavement Technology (Parts 1 – 10) and VicRoads Supplements

7. AGAM – Austroads Guide to Asset Management (Parts 1 – 10) and VicRoads Supplements.

8. ITS SD – Intelligent Transport Systems Standard Drawing

Table of Contents Drawing No.

Title Date Last Updated

Cross/References Comment

PITS

SD1001C Pit Dimensioning and Setting Out Details 1/8/02 SD1011, SD1021, SD1041, SD1051, SD1101, SD1102, SD1111, SD1112, SD1121, SD1131, SD1141, SD1231, SD1271, SD1272, SD1281, SD1282, SD1291, SD1301, SD1311, SD1321, SD1322, SD1401, SD1411, SD1421, SD1431, SD1441, SD2001, SD2002

SD1002B Pit and Pipe Invert Levels 1/8/02 Note 3: Reference to RDN 9-6A shall be amended to RDN 5-01. SD1001, SD1011, SD1021, SD1051

SD1011D Unhaunched Pits 1/7/05 AS1379 AS/NZS4671 AS5100 SD1001, SD1021, SD1041, SD1051

SD1021C Haunched Pits 1/7/05 AS1379 SD1001, SD1011, SD1041, SD1051

SD1022A Double Haunched Pit Type A 1/7/05 AS1379 AS/NZS4671 AS/NZS4680 SD1041



Drawing No.



SD1023A Double Haunched Pit Type B 1/7/05 AS1379 AS/NZS4671 AS/NZS4680 SD1041, SD1051

SD1041C Step Irons 1/7/05 AS3679 AS4198/1994 (use latest version) AS/NZS4680 SD1011, SD1021

SD1051D Pit Covers 1/9/10 AS3600 AS3996 SD1011, SD1021, SD1281

SD1061C Lintels 1/7/05 AS1379 VR Specification Section 611 SD2001

SD1101B Inlet Catch Pit (Type 1) - Pipe Culverts 300 to 600 Dia

1/2/98 AS1379 SD1001, SD1051

SD1102A Inlet Catch Pit (Type 2) - Pipe Culverts 300 to 600 Dia

1/2/98 AS1379 SD1001, SD1051

SD1111C Inlet Catch Pit (Type 1) - Box Culverts 150 to 300 High

1/7/05 AS1379 SD1001, SD1051

SD1112B Inlet Catch Pit (Type 2) - Box Culverts 150 to 300 High

1/7/05 AS1379 SD1001, SD1051

SD1121C Junction Pit - Concrete Cover 1/7/05 AS1379 AS5100 VR Specification Section 701 SD1001, SD1011, SD1021, SD1041, SD1051, SD1131

SD1131C Junction Pit - Cast Iron Cover 1/7/05 AS1379 AS/NZS4671 AS5100 SD1001, SD1011, SD1021, SD1041, SD1051, SD1121

SD1141C End Entry Pit 1/7/05 AS1379 AS/NZS4671 AS5100 SD1001, SD1011, SD1041, SD1051

SD1231C Side Entry Pit (CD2 Channel) - One Metre Inlet 1/7/05 AS1379 AS/NZS4671 AS5100 SD1001, SD1011, SD1021, SD1041, SD1051, SD1061

SD1271C Side Entry Pit (SM Kerb) - Cast Iron Cover - One Metre Inlet

1/7/05 AS1379 AS/NZS4671 AS5100 SD1001, SD1011, SD1021, SD1041, SD1061



Drawing No.



SD1272C Side Entry Pit (B Type Kerb) - Cast Iron Cover - One Metre Inlet


SD1281C Side Entry Pit (SM Kerb) - Cast Iron Cover in Road - One Metre Inlet


SD1282C Side Entry Pit (B Type Kerb) - Cast Iron Cover in Road - One Metre Inlet


SD1291C Side Entry Pit (SM Kerb) - Cast Iron Cover in Road - 1.5 Metre Inlet


SD1301C Side Entry Pit- Concrete Cover - One Metre Inlet 1/7/05 AS1379 AS/NZS4671 AS5100 SD1001, SD1011, SD1021, SD1041, SD1051, SD1061, SD1271, SD1272

SD1311C Side Entry Pit (SM Kerb) - Concrete Cover - 1.5 Metre Inlet

1/7/05 AS1379 AS/NZS4671 AS5100 SD1001, SD1011, SD1021, SD1041, SD1051, SD1061, SD1271,

SD1321E Grated Side Entry Pit (SM Kerb) - One Metre Inlet 1/7/05 AS1379 AS1650 AS/NZS4671 AS5100 SD1001, SD1011, SD1021, SD1041, SD1061,

SD1322E Grated Side Entry Pit (B Type Kerb) - One Metre Inlet

1/7/05 AS1650 AS1379 AS/NZS4671 AS5100 SD1001, SD1011, SD1021, SD1041, SD1061,

SD1401C Grated Pit - Footways 1/8/02 AS1379 AS/NZS4680 SD1011

SD1411F Grated Pit - Depressed Steel Grate 1/7/05 AS1379 AS/NZS4671 AS/NZS4680 AS5100 SD1001, SD1011, SD1021, SD1041, SD1431



Drawing No.



SD1421D Grated Pit - Concrete Grate 1/7/05 AS1302/1991 (use latest version) AS1379 AS/NZS4671 AS5100 VR Specification Section 610 SD1001, SD1011, SD1021, SD1041,

SD1431E Grated Pit - Flush Steel Grate 1/8/02 AS1379 AS/NZS4680 SD1001, SD1011, SD1021, SD1041,

SD1441C Grated Pit - For Open-Graded Asphalt Surface 1/8/02 AS1379 AS/NZS4680 SD1001, SD1011, SD1021, SD1041, SD1431, SD5401

SD1501C Grated Trench 1/7/05 AS1379 AS3996/1992 AS/NZS4680 AS/NZS4671 SD1051, SD1131, SD2001, SD3901

SD1511B Installation Conditions - For Rigid Pipes 1/7/05 AS3725/1989 (use latest version) VR Specification Section 701

SD1521A Catch Drain - Type A 16/9/94

SD1531B Catch Drain - Type B 1/10/99

SUBSURFACE DRAINS

SD1601D Subsurface Drain - Types 1/8/02 SD1611, SD1621, SD1622, SD1631, SD1641

SD1611D Subsurface Drain - Pits 1/9/10 AS1379 AS3600 AS3996 VR Specification Section 611 & Section 610 SD1041, SD1121, SD1131, SD1601, SD1621, SD1631, SD1641,

SD1621D Subsurface Drain - Location 1/7/05 VR Specification Section 204 SD1601, SD1621, SD1622, SD1631, SD1641, SD5352, SD5381, SD5421,

SD1622B Pavement Drain - Alternative Methods 1/8/02 SD1601, SD1611, SD1621,

SD1631E Pavement Drain - Terminals 1/7/05 Note 10: Reference to Technical Bulletin No. 32 shall be amended to AGPT Part 10. AS1379 SD1601, SD1611, SD1621, SD1641

SD1641A Pavement Drain - Alternative Arrangements 1/7/95 SD1601, SD1611, SD1621, SD1631



Drawing No.



CULVERTS

SD1700 Culvert Inlet and Outlet Structures - Selection Guide

1/2/95 SD1701, SD1801, SD1811, SD1821, SD1831, SD1841, SD1851, SD1861, SD1881, SD1891, SD1901, SD1911, SD1921, SD1931, SD1941, SD1951, SD1961, SD1971, SD1981, SD1991, SD1992,

SD1701B Drop Inlet - Type 1 1/2/98 AS1304/1991 (use latest version) AS1379 SD1700, SD1801, SD1811, SD1821, SD1831, SD1841, SD1842, SD1851, SD1852, SD1861, SD1862, 1981

SD1801A Grouted Masonry Endwall 1/2/95 SD1700

SD1811B Mass Concrete Endwall - Pipe Culverts 300 to 525 Dia

1/2/98 Note 4: Reference to SD1812 shall be deleted. AS1379 AS3600 VR Specification Section 611 & Section 701 SD1700,

SD1821B Mass Concrete Endwall - Pipe Culverts 600 to 900 Dia

1/2/98 Note 5: Reference to SD1822 shall be deleted. AS1379 AS3600 VR Specification Section 701 SD1700,

SD1831B Mass Concrete Endwall - Box Culverts 225 to 450 High

1/2/98 Note 5: Reference to SD1832 shall be deleted. AS1379 AS3600 VR Specification Section 701 SD1700

SD1841C Mass Concrete Wingwall - Types 1, 2 & 3 - Box Culverts 450 to 900 High

1/7/05 AS1379 AS3679 AS3600 AS/NZS4671 VR Specification Section 701 SD1700, SD1842

SD1842 Mass Concrete Wingwall - Quantities - Types 1, 2 & 3 - Box Culverts 450 to 900 High

1/2/95 SD1841

SD1851C Mass Concrete Wingwall - Types 1, 2 & 3 - Pipe Culverts 300 to 525 Dia

1/7/05 AS1379 AS3600 AS/NZS4671 VR Specification Section 701 SD1700, SD1852

SD1852 Mass Concrete Wingwall - Quantities - Types 1, 2 & 3 - Pipe Culverts 300 to 525 Dia

1/2/95 SD1851



Drawing No.



SD1861C Mass Concrete Wingwall - Types 1, 2 & 3 - Pipe Culverts 600 to 2100 Dia


SD1862 Mass Concrete Wingwall - Quantities - Types 1, 2 & 3 - Pipe Culverts 600 to 2100 Dia

1/2/95 SD1861

SD1881C Mass Concrete Wingwall - Types 1, 2 & 3 - Skew Pipe Culverts 600 to 1200 Dia

1/7/05 AS1379 AS3600 AS/NZS4671 VR Specification Section 701 SD1700

SD1882 Mass Concrete Wingwall - Quantities - Types 1, 2 & 3 - Skew Pipe Culverts 600 to 1200 Dia

1/2/95 SD1881

SD1891C Mass Concrete Wingwall - Types 1, 2 & 3 - Skew Pipe Culverts 1350 to 2100 Dia


SD1892 Mass Concrete Wingwall - Quantities - Types 1, 2 & 3 - Skew Pipe Culverts 1350 to 2100 Dia

1/2/95 SD1891

SD1901C Mass Concrete Wingwall - Types 1, 2 & 3 - Skew Multiple Pipe Culverts 600 to 1200 Dia


SD1902 Mass Concrete Wingwall - Quantities - Types 1, 2 & 3 - Skew Multiple Pipe Culverts 600 to 1200 Dia

1/2/95 SD1901

SD1911C Mass Concrete Wingwall - Types 1, 2 & 3 - Skew Multiple Pipe Culverts 1350 to 2100 Dia


SD1912 Mass Concrete Wingwall - Quantities - Types 1, 2 & 3 - Skew Multiple Pipe Culverts 1350 to 2100 Dia

1/2/95 SD1911

SD1921C Reinforced Concrete Wingwall - Types 1, 2 & 3 - Pipe Culverts 300 to 525 Dia


SD1922 Reinforced Concrete Wingwall - Quantities - Types 1, 2 & 3 - Pipe Culverts 300 to 525 Dia

1/2/95 SD1921



Drawing No.



SD1931C Reinforced Concrete Wingwall - Types 1, 2 & 3 - Pipe Culverts 600 to 2100 Dia


SD1932 Reinforced Concrete Wingwall - Quantities - Types 1, 2 & 3 - Pipe Culverts 600 to 2100 Dia

1/2/95 SD1931

SD1941C Reinforced Concrete Wingwall - Types 1, 2 & 3 - Skew Pipe Culverts 600 to 2100 Dia


SD1942 Reinforced Concrete Wingwall - Quantities - Types 1, 2 & 3 - Skew Pipe Culverts 600 to 2100 Dia,

1/2/95 SD1941

SD1951C Reinforced Concrete Wingwall - Types 1, 2 & 3 - Skew Multiple Pipe Culverts 600 to 1200 Dia


SD1952 Reinforced Concrete Wingwall - Quantities - Types 1, 2 & 3 - Skew Multiple Pipe Culverts 600 to 1200 Dia

1/2/95 SD1951

SD1961C Reinforced Concrete Wingwall - Types 1, 2 & 3 - Skew Multiple Pipe Culverts 1350 to 2100 Dia


SD1962 Reinforced Concrete Wingwall - Quantities - Types 1, 2 & 3 - Skew Multiple Pipe Culverts 1350 to 2100 Dia

1/2/95 SD1962

SD1971C Reinforced Concrete Wingwall - Types 1, 2 & 3 - Box Culverts 225 to 450 High


SD1972A Reinforced Concrete Wingwall - Quantities - Types 1, 2 & 3 - Box Culverts 225 to 450 High

1/7/05 SD1971

SD1981C Reinforced Concrete Wingwall - Types 1, 2 & 3 - Box Culverts 600 to 900 High


SD1982 Reinforced Concrete Wingwall - Quantities - Types 1, 2 & 3 - Box Culverts 600 to 900 High

1/2/95 SD1981

SD1991A Driveable Culvert Endwalls - Type 1 - Pipe Culverts Up To 600 mm Dia. and Box Culverts up to 600 mm Wide

1/2/98 AS1379 AS3600 VR Specification Section 701



Drawing No.



SD1992A Driveable Culvert Endwalls - Type 2 - Pipe Culverts Up To 600 mm Dia. and Box Culverts up to 600 mm Wide

1/2/98 AS1329 AS3600 VR Specification Section 701

KERBS

SD2001D Kerbs 1/2/98 Note 2: Reference to RDG Part 3 shall be amended to AGRD Part 3 & VRS to AGRD Part 3 AS1379

SD2002B Channels and Spiked Kerbs 1/9/10 AS3600 AS3996 SD1401

SD2011B Kerb Terminals - SM2 & SM3 1/3/97 SD2001

SD2012B Kerb Terminals - CD2 1/3/97 SD2002

SD2021A Kerb Transitions 1/7/95 SD2001

SD2051A Kerb Outlet to Beaching 1/9/10 VR Specification Section 720 & Section 713

SD2052A Bridge End Post Outlet to Median Drain 1/9/10 VR Specification Section 720 & Section 713

SD2061 Withdrawn 1/9/10 See SD2064, SD2065 & SD2066

SD2062 Withdrawn 1/9/10 See SD2064, SD2065 & SD2066

SD2063 Residential Cul De Sac 5m Car/8.8m Service Vehicle

1/7/05

SD2064 Truck Access To Rural Properties Type A 1/9/10 Note: Refer to VicRoads Guidelines for Access to Rural Properties. Table Note: Refer also to VRS to AGRD Part 4A. Note: Reference to Austroads Guide to the Structural Design of Road Pavements shall be amended to AGPT Part 2 and AGAM Part 5. VicRoads RC500.22 Road Management Act 2004 VicRoads TEM Vol 2 SD1991

SD2065 Truck Access To Rural Properties Type B 1/9/10 As above

SD2066 Truck Access To Rural Properties Type C 1/9/10 As above

SD2071A Indented Bus Bays & Pavement Details 1/9/10 SD1621 (latest version)

SD2081 Emergency Median Crossing 1/8/02 SD1991

SD2091A Help Phone Indented Bay (Rural) - reissued 1/9/10 ITS SD TC2022 ITS SD TC2023 (ITS Drawings are available at the VicRoads website – Online Bookshop)



Drawing No.



POSTS AND FENCES

SD3001C Guide Posts 1/7/05 AS1906/1981 (use latest version) VicRoads TEM Vol 2

SD3101A Fence (Type A) - A1 and A2 Post and Wire 1/7/95 SD3151, SD3161, SD3171

SD3102 Fence (Type A) Cattle Fence Post and Wire 1/8/02 AS1379/1991 (use latest version) SD3171

SD3103 Heavy Duty Stock Proof Fence 1/8/02 AS1379/1991 (use latest version)

SD3111A Fence (Type B) - B1 and B2 - Post and Wire 1/7/95 SD3151, SD3161, SD3171

SD3112 Fence (Type B) Sheep Fence Post and Wire 1/8/02 AS1379/1991 (use latest version) SD3171

SD3121A Fence (Type H) - H1 and H2 - Wire Mesh 1/7/95 SD3151, SD3161, SD3171

SD3122 Fence (Type H) – Row 1 - Wire Mesh 1/7/05 SD3151, SD3161,

SD3131A Fence (Type K) - Chain Wire Mesh 1/7/95 AS1725/1975 (use latest version) AS1379/1991 (use latest version) SD3171

SD3143A Fence – Welded Mesh 1/7/05 SD3171

SD3151A Fence - Double Strainer Assembly 1/7/95 SD3101, SD3111, SD3121, SD3161,

SD3161A Fence - Posts and Stays 1/7/95 AS1379/1991 (use latest version) SD3101, SD3111, SD3112, SD3131

SD3171A Electrical Insulation of Fences – Insulation Details 1/7/95 SD3101, SD3111, SD3121, SD3131, SD3141

SD3181 Koala Fence Details This SD has been temporarily withdrawn from publication.

1/8/02 Currently being updated. For koala fence details email [email protected]

SD3301C Noise Fence – 2m to 4m High with Timber Planks This SD has been temporarily withdrawn from publication.

1/4/05

SD3302A Noise Fence – 2m to 4m High with Timber Panels This SD has been temporarily withdrawn from publication.

1/4/05

GUARD FENCES AND BARRIERS

SD3501F Guard Fence - Location 1/9/10 Note 5: Reference to RDG Part 3 shall be amended to VRS to AGRD Part 6, Section 4.2.2. SD2001, SD3501, SD3611, SD3621, SD3661, SD3671

SD3502B Guard Fence - Location Relative to Kerb or Shoulder

1/8/02 General Note 2: Reference to SD3611 and SD3621 shall be deleted. SD2001, SD3501, SD3661, SD3671



Drawing No.



SD3511F Guard Fence - (Line A) - Rail Length and Offset Details

1/9/10 SD3501, SD3521, SD3541, SD3542

SD3521E Guard Fence - (Line B) - Rail Length and Offset Details

1/9/10 Note 1: Reference to SD3051 shall be deleted. SD3501, SD3511, SD3541, SD3542

SD3531E Guard Fence - In Medians 1/7/05 SD3521, SD3541, SD3511, SD3501

SD3541F Breakaway Cable Terminals (BCTA) - General Arrangement

1/7/05 AS1594 AS1720/1988 (use latest version) AS4100 SD3543, SD3551, SD3561

SD3542D Breakaway Cable Terminals (BCTB) - General Arrangement

1/7/05 Refer also to AGRD Part 6, Cht 6 & VRS AS1594 AS1720 AS/NZS4680, AS4100 SD3543, SD3551, SD3561,

SD3543B Post Detail and Breakaway Cable Terminal - Alternative Footings

24/2/94 Refer also to AGRD Part 6, Cht 6 & VRS AS/NZS4680 SD3541, SD3542, SD4551, Text on SD unclear

SD3551B Breakaway Cable Terminal - Anchor Cable and Plate Details

24/1/94 Refer also to AGRD Part 6, Cht 6 & VRS AS1594 SD3541, SD3542, SD3561

SD3561C Breakaway Cable Terminal - End Rail and Bulb Details

1/9/96 Refer also to AGRD Part 6, Cht 6 & VRS AS1594 SD3541, SD3542, SD3561

SD3571B Breakaway Cable Terminal (BCTA) - Runout Area Grading Details

1/7/05 Refer also to AGRD Part 6, Cht 6 & VRS SD3541, SD3542, SD3561, SD3502

SD3573A Wire Rope Safety Barrier Terminal - Runout Area Details

1/9/06 Note 1: Reference to RDN 3-18f shall be amended to RDN 06-02. Note 7: Reference to RDG Part 3, Section 3.6.4 shall be amended to AGRD Part 3, Section 4.4 – Verge and VRS to Part 3 SD4301 (use latest version)

SD3611D Withdrawn 1/9/10

SD3621D Withdrawn 1/9/10

SD3661G Guard Fence (Type B) - Steel Post 1/9/10 AS1594 AS/NZS4680 AS4100 SD3502



Drawing No.



SD3671D Guard Fence (Type D) - Steel Post 1/7/05 AS1594 AS4100 AS/NZS4680 SD3502

SD3901E Concrete Barriers – Installation Details - Type F-Shape

1/7/05 AS5100 VR Specification Section 610

SD4071D Guard Fence - Layouts for Bridge Approaches 1/7/05 General Note 1: Reference to SD4082 shall be deleted. SD4081, SD4082, SD3571, SD3541, SD3561, SD3501, SD3502, SD3511, SD3521

SD4081E Guard Fence - Bridge Approaches (Long End Post) 1/8/02 Bridge Dwg 181347 (Drawing being updated for future release) AS4100/1990 (use latest version) SD3661, SD4071, SD3501, SD1301

SD4082C Withdrawn 1/9/10

SD4083A Cattle Underpass – Road Cross Section and Guard Fence Treatment

1/8/02 Note 3: Reference to RDG Part 3, Table 3.6.3 shall be amended to VicRoads Supplement to AGRD Part 3, Table V4.2. SD3521, SD3541,

SD4084B Guard Fence Transition - Bridge Approaches – Guard Fence to Existing Endpost

1/7/05 SD3661 (use latest version), SD4071,

SD4091 Guard Fence - Treatment at Intersections near Bridges - General Layout

1/2/98 Note 3: Reference to SD4082 shall be deleted. SD3551, SD3561, SD3661, SD4092, SD4093, SD4094,

SD4092A Guard Fence - Treatment at Intersections near Bridges Special Layout Using 4m Curved Rail

1/8/02 Note 3: Reference to SD4082 shall be deleted. SD4082, SD4091, SD4093, SD4094, SD3502, SD3551, SD3561, SD3661,

SD4093B Guard Fence - Treatment at Intersections near Bridges - Special Terminal Details

1/7/05 AS1594/1992 (use latest version) AS1720/1988 (use latest version) AS4100 SD3502, SD3551, SD3561, SD4091, SD4092, SD4094,

SD4094 Guard Fence - Treatment at Intersections near Bridges - Post Cap and Auxiliary Anchor Assembly

1/2/98 AS1650/1989 (use latest version) AS1554/1995 (use latest version) SD3551, SD3561, SD4091, SD4092, SD4093,



Drawing No.



SD4301D Wire Rope Safety Barrier (WRSB) - Length of Need

1/9/10 Notes 1, 3 & 4: Reference to RDN 3-18f shall be amended to RDN 06-02. Note 2: Reference to RDG Part 3, Section 3.9 shall be amended to VRS to AGRD Part 6, Section 4.2.2. SD3573

SD4302C Emergency Median Crossing with WRSB 1/9/06 Note 1: Reference to RDN 3-18f shall be amended to RDN 06-02.

SD4303B Layout for WRSB Match Existing Structures 28/8/06

SD4501A Safety Barriers at Bridge Approaches - Medium and High Containment Levels - Residual Clear Zone Behind Safety Barrier

greater than 9 metres

1/7/05 Note 1: Reference to RDN 12-01 shall be amended to RDN 06-07.

SD4511 Safety Barriers at Bridge Approaches - Medium and High Containment Levels - Residual Clear Zone Behind Safety Barrier

less than 9 metres


SD4521 Safety Barriers at Bridge Approaches - Medium and High Containment Levels - Left Verge on Steep Terrain

1/2/98 Note 1: Reference to RDN 12-01 shall be amended to RDN 06-07. SD4081

SD4531A Safety Barriers at Bridge Approaches - Medium and High Containment Levels - Left Verge on Flat Terrain


SD4541 Safety Barriers at Bridge Approaches - Medium and High Containment Levels - Treatment on the Gore Area of Exit Ramp

1/2/98 Note 1: Reference to RDN 5-3 shall be amended to AGRD Part 4C, Section 11.2.1 and VicRoads Supplement to AGRD Part 4C, Figure V11.1. Note 2: Reference to RDN 12-01 shall be amended to RDN 06-07.

SD4551 Construction of Verge Rounding 1/8/02 Note 1: Reference to RDG Part 3, Table 3.6.4.2 shall be amended to AGRD Part 3, Table 4.10.

RETAINING WALLS

SD5001B Mass Concrete Retaining Wall - Two Metre High 1/2/98 AS3600 VR Specification Section 701

SD5011B Grouted Random Rubble Retaining Wall - Two Metre High

1/2/98 AS1379

SD5021A Dry Rubble Retaining Wall - Two Metre High 1/7/95

SD5031B Brick Retaining Wall - To 750 High 1/2/98 AS1379

SD5041 Spoon Drain Pit at Top of Batter 1/8/02 AS/NZS4671 AS/NZS4680

CONCRETE PAVEMENT

SD5300 Concrete Pavement Details - Selection Guide 1/7/95 SD5301, SD5311, SD5321, SD5331, SD5341, SD5351, SD5352, SD5361, SD5371, SD5381, SD5391, SD5401, SD5411, SD5421



Drawing No.



SD5301C Plain Concrete Pavement (PCP) - Transverse Joint & Isolated Reinforcement Detail

1/7/95 SD5300, SD5401, SD5411

SD5311B Jointed Reinforced Concrete Pavement (JRCP) - Transverse Joint Detail

1/7/95 SD5300, SD5401

SD5321B Jointed Reinforced Concrete Pavement (JRCP) - Reinforcement & Joint Details

1/7/95 SD5300, SD5311

SD5331B Jointed Plain and Reinforced Concrete Pavement (PCP) & (JRCP) - Treatment of Slab Openings

1/7/95 SD5300, SD5401

SD5341B Jointed Concrete Pavement - Slab Replacement 1/7/95 SD5300, SD5401, SD5411

SD5351C Jointed Concrete Pavement - Terminal at Bridge Structure

1/7/95 SD5300, SD5301, SD5361, SD5401

SD5352 Jointed Concrete Pavement - Slab Anchor and Transverse Junction with Flexible Pavement Details

1/7/95 SD5300

SD5361C Continuously Reinforced Concrete Pavement (CRCP) - Reinforcement-Tie Bar Arrangement & Traverse Construction Joint Detail

1/7/95 SD5300, SD5371, SD5411

SD5371A Continuously Reinforced Concrete Pavement (CRCP) - Alternative Lap Patterns for Longitudinal Bars

1/7/95 SD5300, SD5361

SD5381C Continuously Reinforced Concrete Pavement (CRCP) - Transverse Junction of Concrete and Flexible Pavements

1/7/95 SD5300, SD5401

SD5391C Continuously Reinforced Concrete Pavement (CRCP) - Terminal at Bridge Structure

1/7/95 SD5300, SD5361, SD5401

SD5401B Concrete Pavement - All Types - Expansion Joint Detail

1/7/95 SD5300

SD5411C Concrete Pavement - All Types - Longitudinal Tied Joints

1/7/95 SD5300

SD5421C Concrete Pavement - All Types - Longitudinal Junction with Flexible Pavement and Traffic Signal Detector Loop Installation

1/7/95 SD5300, SD5352, SD5381,

Road Design Notes (RDNs)

03-01 The Use of High Profile Barrier Kerb (previously 3-30b)

01/11/05 AGRD Part 3 – Cht 4 & VRS

03-02 Accessible Tram Stops in Medians (previously 12.01)


03-03 Accessible Tram Stops in Safety Zones (previously 3-33)

01/07/07 AGRD Part 3 – Cht 4, AGRD Part 4C & VRS

05-01 Pit and Pipe Invert Levels (previously 9-6a) 1/3/97 AGRD Part 5 – Cht 4.6.6 & VRS

05-02 Accepted Drainage Products (previously 9-13) 1/05/02 AGRD Part 5 – Cht 4.6.6 & VRS

06-01 Interpretation and Application of VicRoads Traffic Noise Reduction Policy 2005 (previously 6-01b)

12/12/05 AGRD Part 6B – Cht 2 & VRS

06-02 The Use of Wire Rope Safety Barriers (WRSB) (previously 3-18f)


06-03 Roadside Utility Poles (previously 3-31) 01/02/07 AGRD Part 6 & VRS



Drawing No.



06-04 Accepted Safety Barrier Products (previously 9-12a)


06-05 Approved DDA tactile products (previously 9-14) 1/06/02 AGRD Part 6A – Cht 6 & VRS

06-06 Guidelines for the Placement of Tactile Ground Surface Indicators (previously 9-15)

30/05/05 AGRD Part 6A – Cht 6 & VRS

06-07 The Performance Safety Barrier Treatments at Bridge Approaches (previously 12-1)


n/a Run-out area behind BCTA – Break-Away Cable Terminal Type A Withdrawn and included in VRS (previously 3-19)


n/a Critical Taper Angles at the approach to a New Jersey Barrier – Withdrawn and included in VRS (previously 3-20)


n/a Provisions for Trucks – Withdrawn and included in VRS (previously 3-22)


n/a Detention Basins for Roadworks – Withdrawn and included in VRS (previously 7-6)


n/a High Density Polyethylene Structured Wall Pipes – Withdrawn (previously 7-10)

9/12/98 AGRD Part 5 – Cht 4.6.6 & VRS

n/a Webforge Steel Grates – Withdrawn (previously 9-9a)

3/11/97

n/a Supplier-modified Break-away Cable Terminals – Withdrawn and included in VRS (previously 9-10)


n/a Rocla CPO (Circular Punched Out) Pits – Withdrawn and included in VRS (previously 9-11)

1/9/96 AGRD Part 5 –VRS

n/a Quadguard TM Crash Cushions – Withdrawn (previously 12-4)


Note:

RDNs are available on VicRoads website at www.vicroads.vic.gov.au.

standarddrawingsforroadworkstableofcontentsoct2010rev11final

Documents