standard operating procedure - horizontal well drillers · all rig personnel must follow this...

Horizontal Well Drillers

SOP #: 9.85

Revision #: 1

Implementation Date: 2015/11/24

Page #: 1 of 9 Last Reviewed/Update Date:

2015/11/24

SOP Owner: HWD Executive Management

Approval: HWD Executive Management

Standard Operating Procedure – Rig Component Inspection Schedule

1. Purpose

The common thread throughout the SOP and HWD Policies and Procedures in general is

the identification of responsibilities. This manual is intended to clearly and concisely

identify the steps required by employees to complete any given operation in a manner

that is consistent with Horizontal Well Drillers standards. It will document progressive

steps required in sequence that are to be followed, an authorizing company department or

position, and an author that is to be consulted if there are questions in any portion of the

SOP standards.

2. Scope

ALL RIG PERSONNEL

3. Prerequisites

Personnel are required to wear proper personal protective equipment, follow job safety

rules, and have the appropriate experience and certifications to carry out their job

functions satisfactorily.

4. Responsibilities

TOOL PUSHER/DRILLER IS ULTIMATELY RESPONSIBLE FOR ENFORCEMENT

AND TO ENSURE THAT THIS PROCEDURE IS FOLLOWED TO STANDARD.

ALL RIG PERSONNEL MUST FOLLOW THIS STANDARD OPERATING

PROCEDURE.

5. Procedure

HWD follows the OEM’s guidelines using API RP 4G practices for inspection and

maintenance of load bearing and critical components. This document is a basic schedule

of inspections. For more specific inspection requirements and forms, reference the

OEM’s Supplemental Manual Maintenance and Inspection sections.


SOP #: 9.85

Revision #: 1



2015/11/24



6. References

HWD Employee Handbook

7. Definitions

NA


SOP #: 9.85

Revision #: 1



2015/11/24



standard operating procedure - horizontal well drillers · all rig personnel must follow this...

Documents