R

WIKA - WomackEasy Order Guide

Easy Order Guide

R

www.wika.comwww.womackmachine.com | (800) 569-9801www.shop.womackmachine.com WOM10 150 09/2014

Mini Needle Valve - 910.11.100Standard featuresMedia Temp: max. 200°F (+93°C); min. 0°F (-18°C) Flow Rate: Max. Cv = 0.42Orifice Size: 0.172” (4.37mm) Pressure Rating: 10,000 psiValve Body: 316 SS, electropolishedBonnet: 316 SS, electropolishedValve Stem: 316 SS, electropolishedHandle: T, 316 SS, electropolishedHandle Bolt: Stainless steelStem Seals: Viton® O-ring, Teflon® back-up ring

Type 910.11.100 mini-needle valves can be used to isolate a pressure instrument from the application where space is limited. Carbon steel and stainless steel

mini-valves supplied with T-handle.

flow

Type 910.11.100Mini Needle Valves

Connection Body Material Size Part NumberMale-Female

Stainless steel 1/4" NPT 4266235 1077581

Type 910.24Mini-Siphon

Body Material Conn. Size Pressure Rating Temp. Rating Part NumberStainless steel 1/2" NPT 6,092 psi 1,062 °F 50673670 1578609

Mini Siphon - 910.24Standard featuresMaterials: Body: 316 Ti SS (1.4571) Internal Chamber: 316 Ti SS (1.4571)Mounting Position: Vertical or horizontalConnection: 1/2” NPT-male to 1/2” NPT-female Flow: Male to female connectionInlet Orifice: 0.1575” (4mm)Maximum Media Pressure: 6,092 psi @ 212 °FMaximum Media Temperature: 1,062 °F at 2,611 psi

The WIKA mini-siphon is designed specifically to replace the conventional pigtail and coil siphon. The mini-siphon has a thermal barrier which protects the pressure gauge from harmful steam, hot vapors and liquids, and contains a unique inner chamber that reduces pressure surges and “water hammer”. The mini–siphon also eliminates gauge whip and vibration that is typically found on traditional siphons by mounting the gauge closer to the process.

TI.303” Case

Type TI.30Connection 1/2" NPT Back

Dial Size 3"Stem Length 2½" 4" 6"0/250 °F 30025D206G4 1036682 30040D206G4 1547644 30060D206G4 108346250/550 °F 30025D216G4 1038751 30040D216G4 1247071 30060D216G4 1440931

Bimetal Thermometers - SS CaseStandard featuresSize: 3”Case: 304 SSDial: Anti-parallax, heavy gauge aluminum with white matte finishExternal Reset: Slotted hex adjustmentWindow: Fully gasketed glassHermetic Seal: Per ASME B40.3, NEMA 4XStem: ¼” diameter; 304 SS, TIG welded at tip and case connection. Dampening: Inert gel to minimize pointer oscillationAccuracy: +1% full range span (ASME B40.3 Standard)

WIKA bimetal thermometers are ideal for most rugged industrial temperature measurement applications. The hermetically-sealed case offers protection from weather and dust, and is guaranteed against fogging up. WIKA type TI.30 thermometers are guaranteed for 7 years.

*Womack part numbers listed in Red. Missing part numbers will be created when an order is placed.*All items are stocked. Inventory may vary.

*Womack part numbers listed in Red. Missing part numbers will be created when an order is placed.*All items are stocked. Inventory may vary.

Profile Ring

Type 213.40Dial Size 2½”

0659665 1555263

Type 2XX.53Dial Size 2½”

9092331 1076121

U-Clamp Panel Mount Kit -Model 213.40

U-Clamp Panel Mount - Model 2XX.53

Standard featuresProfile Ring: Steel chrome-platedScrews (M2.6 x 3): Steel nickel-platedU-Clamp Bracket: Steel zinc-platedPrior to installation, the factory-installed covering must be removed.

Standard featuresU-Clamp Bracket: Steel zinc-platedNo modifications to the pressure gauge are needed for installation.

U-Clamp

Two case screws

(not to scale)

U-Clamp

For additional information, please visit www.wika.com or www.womackmachine.comWomack Machine Supply Womack Machine Supply

Industrial Gauges - SS Case, Liquid-filledStandard featuresSize: 2½”Case: 304 SSWetted Parts: Copper alloyWindow: PolycarbonateRing: Stainless steel polishedAccuracy: (2” & 2½”) ± 2/1/2% of span ASME B40.100 Grade AConnection: Lower or back mountLiquid Filled: Glycerine

WIKA type 213.53 gauges feature a stainless steel case for protection in harsh environments. The glycerine case filling makes the 213.53 an excellent solution in applications with high vibrations and pulsation.

Type 213.53 (Liquid-filled)

Size 2½"Connection LM CBMConn. Size 1/4" NPT 1/4" NPTPress. Scale PSI/BAR PSI/BAR30" Hg 9691957 1324766 9692139 107526730"-0-30 psi 9691965 103180630"-0-60 psi 9691974 143979430 psi 9691990 1072396 9692147 103419760 psi 9692007 1055929 9692155 1578610100 psi 9692015 1057480 9692164 1242309160 psi 9692024 1059728 9692172 1050804200 psi 9692032 1058434 9692180 1440575300 psi 9692040 1061017 9692198 1249805600 psi 9692066 1052942 9692202 10735371,000 psi 9692075 1072391 9692210 12497581,500 psi 9692083 1072390 9692228 12497572,000 psi 9692091 1075268 9692236 10448603,000 psi 9692105 1057485 9692245 10979265,000 psi 9692113 1578490 9692253 105541710,000 psi 9692121 1033022 9692261 1248511

Type 213.53 (Liquid-filled)

Size 2½"Connection LMConn. Size 7/16"-20 SAEPress. Scale PSI/BAR60 psi 52017141 1578492100 psi 9795664 1242310160 psi 9795672 1071190200 psi 9795680 1249756300 psi 4259916 1578496600 psi 50244515 15784981,000 psi 50041282 15636721,500 psi 50244531 15784992,000 psi 9795698 10352703,000 psi 9795702 15676465,000 psi 9795710 109788510,000 psi 4225384 1578502

Standard featuresSize: 2½”Case: Forged brass, gold-paintedRing: Gold-plated ABSWetted Parts: Copper alloyWindow: AcrylicAccuracy: (2½”) ± 2/1/2% of span ASME B40.100 Grade AConnection: Lower or back mountLiquid Fill: Glycerine

This type 213.40 gauge features an integral Bourdon tube which is soldered or brazed directly into the one-piece forged brass case/socket.

Applications■ Intended for adverse service conditions where pulsation, shocks or vibration exists■ Suitable for gaseous or liquid media that will not obstruct the pressure system ■ Hydraulic equipment and compressors

Industrial Gauges - Forged Brass Case, Liquid-filled

Type 213.40 (Liquid-filled)

Size 2½"Connection LM CBMConn. Size 1/4" NPTPress. Scale PSI/BAR PSI/BAR30" Hg 9734109 1325036 9734312 125094530 psi 9734125 1249645 9734223 124718160 psi 9734134 1247143 9734231 1247142100 psi 9734142 1325042 9746072 1250896160 psi 8986216 1245856 9734257 1578611300 psi 9798870 1038508 9734265 1242130600 psi 8985815 1578505 8985774 10536731,000 psi 9798404 1250895 9746048 12421791,500 psi 9734193 1245858 8985829 10345273,000 psi 8985566 1050935 8985831 15786125,000 psi 9746064 1578509 8985832 1578614

Type 213.40 (Liquid-filled)

Size 2½"Connection LMConn. Size 7/16"-20 SAEPress. Scale PSI/BAR60 psi 50508181 1578503100 psi 9794980 1245901200 psi 9795006 1375892300 psi 50291131 1578513600 psi 9795030 15785141,500 psi 9795065 10542772,000 psi 9795073 10784883,000 psi 9795081 10602525,000 psi 9795090 105542910,000 psi 50090267 1578515

Industrial Gauges - SS Case, Liquid-filledStandard featuresSize: 2½”Case: 304 SSWetted Parts: 316 SSWindow: Safety glassAccuracy: ±2/1/2% of span ASME B40.100 Grade AConnection: Lower back mount Liquid Fill: GlycerineRestrictor: Standard

The type 233.55 LBM is specifically designed and manufactured to exact panel builder requirements. With exclusive features, it is ideal when used for panel mount gauges in the oil and gas, refinery, petrochemical, and food and beverage industries.

Type 233.55

Size 2½"Connection LBMConn. Size 1/4" NPTPress. Scale PSI/BAR30" Hg 4283078 157858330"-0-160 psi 4283124 157858430 psi 4283159 157858560 psi 4283167 1578586100 psi 4283175 1578587160 psi 4283184 1551462600 psi 4283222 1506214800 psi 4283230 15785881,000 psi 4283248 15785891,500 psi 4283256 15785902,000 psi 4283264 15785913,000 psi 4283273 15785925,000 psi 4283281 15785936,000 psi 4283299 150621310,000 psi 4283303 1488682

S-10 Industrial Pressure TransmitterStandard featuresSignal output: 4-20 mA 2-wireSupply voltage: 10-30 VDCProcess connection: 1/2 NPT maleNon-linearity: ≤ ± 0.25% B.F.S.L.Electrical connection: DIN EN 175301-803 (DIN 43 650) with plug connector

Range Part #0 ... 50 InWC 8367656 10746040 ... 100 InWC 8341481 12506160 ... 5 psi 8415072 12469760 ... 10 psi 8642885 12443640 ... 15 psi 8643628 13739950 ... 25 psi 8341995 12482010 ... 30 psi 8643636 12432150 ... 50 psi 8348868 12469780 ... 60 psi 8643644 10365010 ... 100 psi 8643652 12431190 ... 160 psi 8341155 15172040 ... 200 psi 8644918 12456370 ... 250 psi 8341163 1076642

Range Part #0 ... 300 psi 8341732 12432160 ... 400 psi 8341953 15910090 ... 500 psi 8341740 10529280 ... 600 psi 8347128 12432120 ... 750 psi 4294930 12457190 ... 1,000 psi 8610007 10465280 ... 1,500 psi 8341219 13817450 ... 2,000 psi 8353098 15199300 ... 3,000 psi 8342275 10543300 ... 5,000 psi 8340638 10529270 ... 8,000 psi 8341864 10563540 ... 10,000 psi 8347242 15379290 ... 15,000 psi 8359143 1245638

S-20 High PerformanceIndustrial Pressure TransmitterStandard featuresSignal output: 4-20 mA 2-wireSupply voltage: 8-36 VDCProcess connection: 1/2 NPT maleNon-linearity: ≤ ± 0.25% B.F.S.L.Electrical connection: DIN EN 175301-803 (DIN 43 650) with plug connector

Range Part #-30 InHg ... 0 vacuum 52375595 1590979-30 InHg ... 30 psi 52375609 15909810 ... 10 psi 52376460 15909830 ... 30 psi 52376486 15909840 ... 60 psi 52375293 15909480 ... 100 psi 52374301 15909500 ... 160 psi 52375315 15909510 ... 200 psi 52375323 15909520 ... 300 psi 52375340 15909530 ... 500 psi 52375366 15909540 ... 1,000 psis 52375391 15909860 ... 3,000 psis 52375421 15909870 ... 5,000 psis 52375455 15909880 ... 10,000 psis 52375471 1590989

A-10 General PurposePressure Transmitter Standard featuresSignal output: 4-20 mA 2-wireSupply voltage: 8-30 DC Process connection: 1/4 NPT MaleElectrical connection: DIN EN 175301-803 (DIN 43 650) with plug connectorNon-linearity: ≤ ± 0.5% B.F.S.L.

Range Part #0 ... 15 psi 50426397 15786050 ... 25 psi 50426401 15247320 ... 50 psi 50426427 15153430 ... 100 psi 50372475 15153420 ... 200 psi 50398083 15131720 ... 300 psi 50426460 15786060 ... 500 psi 50426478 15697130 ... 1,000 psi 50426486 10596830 ... 1,500 psi 50426494 15786070 ... 2,000 psi 50426508 15786080 ... 3,000 psi 50426516 15598480 ... 5,000 psi 50372483 15565810 ... 10,000 psi 50426532 1549157

E-10 Explosion ProofPressure TransmitterStandard featuresSignal output: 4-20mA, 2-wireSupply voltage: 10-30 VDCProcess connection: 1/4” NPT maleElectrical connection: 1/2” male conduit with cable

Range Part #30”-0-30 psi 4217172 157859430”-0-100 psi 50116703 157859515 psi 50792261 157859660 psi 4363082 1578597100 psi 4363090 1578598200 psi 4364844 1088336300 psi 4363103 1578599500 psi 4363111 15786001,000 psi 4363129 15786011,500 psi 4363137 15786022,000 psi 4363146 15786033,000 psi 4202506 10857085,000 psi 4363155 11014098,000 psi 4363163 157860410,000 psi 4363171 1292830

*Womack part numbers listed in Red. Missing part numbers will be created when an order is placed.*All items are stocked. Inventory may vary.

*Womack part numbers listed in Red. Missing part numbers will be created when an order is placed.*All items are stocked. Inventory may vary.

*Womack part numbers listed in Red. Missing part numbers will be created when an order is placed.*All items are stocked. Inventory may vary.

R

For additional information, please visit www.wika.com or www.womackmachine.comWomack Machine Supply Womack Machine Supply

Industrial Gauges - SS Case, Liquid-filledStandard featuresSize: 2½”Case: 304 SSWetted Parts: Copper alloyWindow: PolycarbonateRing: Stainless steel polishedAccuracy: (2” & 2½”) ± 2/1/2% of span ASME B40.100 Grade AConnection: Lower or back mountLiquid Filled: Glycerine

WIKA type 213.53 gauges feature a stainless steel case for protection in harsh environments. The glycerine case filling makes the 213.53 an excellent solution in applications with high vibrations and pulsation.

Type 213.53 (Liquid-filled)

Size 2½"Connection LM CBMConn. Size 1/4" NPT 1/4" NPTPress. Scale PSI/BAR PSI/BAR30" Hg 9691957 1324766 9692139 107526730"-0-30 psi 9691965 103180630"-0-60 psi 9691974 143979430 psi 9691990 1072396 9692147 103419760 psi 9692007 1055929 9692155 1578610100 psi 9692015 1057480 9692164 1242309160 psi 9692024 1059728 9692172 1050804200 psi 9692032 1058434 9692180 1440575300 psi 9692040 1061017 9692198 1249805600 psi 9692066 1052942 9692202 10735371,000 psi 9692075 1072391 9692210 12497581,500 psi 9692083 1072390 9692228 12497572,000 psi 9692091 1075268 9692236 10448603,000 psi 9692105 1057485 9692245 10979265,000 psi 9692113 1578490 9692253 105541710,000 psi 9692121 1033022 9692261 1248511

Type 213.53 (Liquid-filled)

Size 2½"Connection LMConn. Size 7/16"-20 SAEPress. Scale PSI/BAR60 psi 52017141 1578492100 psi 9795664 1242310160 psi 9795672 1071190200 psi 9795680 1249756300 psi 4259916 1578496600 psi 50244515 15784981,000 psi 50041282 15636721,500 psi 50244531 15784992,000 psi 9795698 10352703,000 psi 9795702 15676465,000 psi 9795710 109788510,000 psi 4225384 1578502

Standard featuresSize: 2½”Case: Forged brass, gold-paintedRing: Gold-plated ABSWetted Parts: Copper alloyWindow: AcrylicAccuracy: (2½”) ± 2/1/2% of span ASME B40.100 Grade AConnection: Lower or back mountLiquid Fill: Glycerine

This type 213.40 gauge features an integral Bourdon tube which is soldered or brazed directly into the one-piece forged brass case/socket.

Applications■ Intended for adverse service conditions where pulsation, shocks or vibration exists■ Suitable for gaseous or liquid media that will not obstruct the pressure system ■ Hydraulic equipment and compressors

Industrial Gauges - Forged Brass Case, Liquid-filled

Type 213.40 (Liquid-filled)

Size 2½"Connection LM CBMConn. Size 1/4" NPTPress. Scale PSI/BAR PSI/BAR30" Hg 9734109 1325036 9734312 125094530 psi 9734125 1249645 9734223 124718160 psi 9734134 1247143 9734231 1247142100 psi 9734142 1325042 9746072 1250896160 psi 8986216 1245856 9734257 1578611300 psi 9798870 1038508 9734265 1242130600 psi 8985815 1578505 8985774 10536731,000 psi 9798404 1250895 9746048 12421791,500 psi 9734193 1245858 8985829 10345273,000 psi 8985566 1050935 8985831 15786125,000 psi 9746064 1578509 8985832 1578614

Type 213.40 (Liquid-filled)

Size 2½"Connection LMConn. Size 7/16"-20 SAEPress. Scale PSI/BAR60 psi 50508181 1578503100 psi 9794980 1245901200 psi 9795006 1375892300 psi 50291131 1578513600 psi 9795030 15785141,500 psi 9795065 10542772,000 psi 9795073 10784883,000 psi 9795081 10602525,000 psi 9795090 105542910,000 psi 50090267 1578515

Industrial Gauges - SS Case, Liquid-filledStandard featuresSize: 2½”Case: 304 SSWetted Parts: 316 SSWindow: Safety glassAccuracy: ±2/1/2% of span ASME B40.100 Grade AConnection: Lower back mount Liquid Fill: GlycerineRestrictor: Standard

The type 233.55 LBM is specifically designed and manufactured to exact panel builder requirements. With exclusive features, it is ideal when used for panel mount gauges in the oil and gas, refinery, petrochemical, and food and beverage industries.

Type 233.55

Size 2½"Connection LBMConn. Size 1/4" NPTPress. Scale PSI/BAR30" Hg 4283078 157858330"-0-160 psi 4283124 157858430 psi 4283159 157858560 psi 4283167 1578586100 psi 4283175 1578587160 psi 4283184 1551462600 psi 4283222 1506214800 psi 4283230 15785881,000 psi 4283248 15785891,500 psi 4283256 15785902,000 psi 4283264 15785913,000 psi 4283273 15785925,000 psi 4283281 15785936,000 psi 4283299 150621310,000 psi 4283303 1488682

S-10 Industrial Pressure TransmitterStandard featuresSignal output: 4-20 mA 2-wireSupply voltage: 10-30 VDCProcess connection: 1/2 NPT maleNon-linearity: ≤ ± 0.25% B.F.S.L.Electrical connection: DIN EN 175301-803 (DIN 43 650) with plug connector

Range Part #0 ... 50 InWC 8367656 10746040 ... 100 InWC 8341481 12506160 ... 5 psi 8415072 12469760 ... 10 psi 8642885 12443640 ... 15 psi 8643628 13739950 ... 25 psi 8341995 12482010 ... 30 psi 8643636 12432150 ... 50 psi 8348868 12469780 ... 60 psi 8643644 10365010 ... 100 psi 8643652 12431190 ... 160 psi 8341155 15172040 ... 200 psi 8644918 12456370 ... 250 psi 8341163 1076642

Range Part #0 ... 300 psi 8341732 12432160 ... 400 psi 8341953 15910090 ... 500 psi 8341740 10529280 ... 600 psi 8347128 12432120 ... 750 psi 4294930 12457190 ... 1,000 psi 8610007 10465280 ... 1,500 psi 8341219 13817450 ... 2,000 psi 8353098 15199300 ... 3,000 psi 8342275 10543300 ... 5,000 psi 8340638 10529270 ... 8,000 psi 8341864 10563540 ... 10,000 psi 8347242 15379290 ... 15,000 psi 8359143 1245638

S-20 High PerformanceIndustrial Pressure TransmitterStandard featuresSignal output: 4-20 mA 2-wireSupply voltage: 8-36 VDCProcess connection: 1/2 NPT maleNon-linearity: ≤ ± 0.25% B.F.S.L.Electrical connection: DIN EN 175301-803 (DIN 43 650) with plug connector

Range Part #-30 InHg ... 0 vacuum 52375595 1590979-30 InHg ... 30 psi 52375609 15909810 ... 10 psi 52376460 15909830 ... 30 psi 52376486 15909840 ... 60 psi 52375293 15909480 ... 100 psi 52374301 15909500 ... 160 psi 52375315 15909510 ... 200 psi 52375323 15909520 ... 300 psi 52375340 15909530 ... 500 psi 52375366 15909540 ... 1,000 psis 52375391 15909860 ... 3,000 psis 52375421 15909870 ... 5,000 psis 52375455 15909880 ... 10,000 psis 52375471 1590989

A-10 General PurposePressure Transmitter Standard featuresSignal output: 4-20 mA 2-wireSupply voltage: 8-30 DC Process connection: 1/4 NPT MaleElectrical connection: DIN EN 175301-803 (DIN 43 650) with plug connectorNon-linearity: ≤ ± 0.5% B.F.S.L.

Range Part #0 ... 15 psi 50426397 15786050 ... 25 psi 50426401 15247320 ... 50 psi 50426427 15153430 ... 100 psi 50372475 15153420 ... 200 psi 50398083 15131720 ... 300 psi 50426460 15786060 ... 500 psi 50426478 15697130 ... 1,000 psi 50426486 10596830 ... 1,500 psi 50426494 15786070 ... 2,000 psi 50426508 15786080 ... 3,000 psi 50426516 15598480 ... 5,000 psi 50372483 15565810 ... 10,000 psi 50426532 1549157

E-10 Explosion ProofPressure TransmitterStandard featuresSignal output: 4-20mA, 2-wireSupply voltage: 10-30 VDCProcess connection: 1/4” NPT maleElectrical connection: 1/2” male conduit with cable

Range Part #30”-0-30 psi 4217172 157859430”-0-100 psi 50116703 157859515 psi 50792261 157859660 psi 4363082 1578597100 psi 4363090 1578598200 psi 4364844 1088336300 psi 4363103 1578599500 psi 4363111 15786001,000 psi 4363129 15786011,500 psi 4363137 15786022,000 psi 4363146 15786033,000 psi 4202506 10857085,000 psi 4363155 11014098,000 psi 4363163 157860410,000 psi 4363171 1292830

*Womack part numbers listed in Red. Missing part numbers will be created when an order is placed.*All items are stocked. Inventory may vary.

*Womack part numbers listed in Red. Missing part numbers will be created when an order is placed.*All items are stocked. Inventory may vary.

*Womack part numbers listed in Red. Missing part numbers will be created when an order is placed.*All items are stocked. Inventory may vary.

R

For additional information, please visit www.wika.com or www.womackmachine.comWomack Machine Supply Womack Machine Supply

Industrial Gauges - SS Case, Liquid-filledStandard featuresSize: 2½”Case: 304 SSWetted Parts: Copper alloyWindow: PolycarbonateRing: Stainless steel polishedAccuracy: (2” & 2½”) ± 2/1/2% of span ASME B40.100 Grade AConnection: Lower or back mountLiquid Filled: Glycerine

WIKA type 213.53 gauges feature a stainless steel case for protection in harsh environments. The glycerine case filling makes the 213.53 an excellent solution in applications with high vibrations and pulsation.

Type 213.53 (Liquid-filled)

Size 2½"Connection LM CBMConn. Size 1/4" NPT 1/4" NPTPress. Scale PSI/BAR PSI/BAR30" Hg 9691957 1324766 9692139 107526730"-0-30 psi 9691965 103180630"-0-60 psi 9691974 143979430 psi 9691990 1072396 9692147 103419760 psi 9692007 1055929 9692155 1578610100 psi 9692015 1057480 9692164 1242309160 psi 9692024 1059728 9692172 1050804200 psi 9692032 1058434 9692180 1440575300 psi 9692040 1061017 9692198 1249805600 psi 9692066 1052942 9692202 10735371,000 psi 9692075 1072391 9692210 12497581,500 psi 9692083 1072390 9692228 12497572,000 psi 9692091 1075268 9692236 10448603,000 psi 9692105 1057485 9692245 10979265,000 psi 9692113 1578490 9692253 105541710,000 psi 9692121 1033022 9692261 1248511

Type 213.53 (Liquid-filled)

Size 2½"Connection LMConn. Size 7/16"-20 SAEPress. Scale PSI/BAR60 psi 52017141 1578492100 psi 9795664 1242310160 psi 9795672 1071190200 psi 9795680 1249756300 psi 4259916 1578496600 psi 50244515 15784981,000 psi 50041282 15636721,500 psi 50244531 15784992,000 psi 9795698 10352703,000 psi 9795702 15676465,000 psi 9795710 109788510,000 psi 4225384 1578502

Standard featuresSize: 2½”Case: Forged brass, gold-paintedRing: Gold-plated ABSWetted Parts: Copper alloyWindow: AcrylicAccuracy: (2½”) ± 2/1/2% of span ASME B40.100 Grade AConnection: Lower or back mountLiquid Fill: Glycerine

This type 213.40 gauge features an integral Bourdon tube which is soldered or brazed directly into the one-piece forged brass case/socket.

Applications■ Intended for adverse service conditions where pulsation, shocks or vibration exists■ Suitable for gaseous or liquid media that will not obstruct the pressure system ■ Hydraulic equipment and compressors

Industrial Gauges - Forged Brass Case, Liquid-filled

Type 213.40 (Liquid-filled)

Size 2½"Connection LM CBMConn. Size 1/4" NPTPress. Scale PSI/BAR PSI/BAR30" Hg 9734109 1325036 9734312 125094530 psi 9734125 1249645 9734223 124718160 psi 9734134 1247143 9734231 1247142100 psi 9734142 1325042 9746072 1250896160 psi 8986216 1245856 9734257 1578611300 psi 9798870 1038508 9734265 1242130600 psi 8985815 1578505 8985774 10536731,000 psi 9798404 1250895 9746048 12421791,500 psi 9734193 1245858 8985829 10345273,000 psi 8985566 1050935 8985831 15786125,000 psi 9746064 1578509 8985832 1578614

Type 213.40 (Liquid-filled)

Size 2½"Connection LMConn. Size 7/16"-20 SAEPress. Scale PSI/BAR60 psi 50508181 1578503100 psi 9794980 1245901200 psi 9795006 1375892300 psi 50291131 1578513600 psi 9795030 15785141,500 psi 9795065 10542772,000 psi 9795073 10784883,000 psi 9795081 10602525,000 psi 9795090 105542910,000 psi 50090267 1578515

Industrial Gauges - SS Case, Liquid-filledStandard featuresSize: 2½”Case: 304 SSWetted Parts: 316 SSWindow: Safety glassAccuracy: ±2/1/2% of span ASME B40.100 Grade AConnection: Lower back mount Liquid Fill: GlycerineRestrictor: Standard

The type 233.55 LBM is specifically designed and manufactured to exact panel builder requirements. With exclusive features, it is ideal when used for panel mount gauges in the oil and gas, refinery, petrochemical, and food and beverage industries.

Type 233.55

Size 2½"Connection LBMConn. Size 1/4" NPTPress. Scale PSI/BAR30" Hg 4283078 157858330"-0-160 psi 4283124 157858430 psi 4283159 157858560 psi 4283167 1578586100 psi 4283175 1578587160 psi 4283184 1551462600 psi 4283222 1506214800 psi 4283230 15785881,000 psi 4283248 15785891,500 psi 4283256 15785902,000 psi 4283264 15785913,000 psi 4283273 15785925,000 psi 4283281 15785936,000 psi 4283299 150621310,000 psi 4283303 1488682

S-10 Industrial Pressure TransmitterStandard featuresSignal output: 4-20 mA 2-wireSupply voltage: 10-30 VDCProcess connection: 1/2 NPT maleNon-linearity: ≤ ± 0.25% B.F.S.L.Electrical connection: DIN EN 175301-803 (DIN 43 650) with plug connector

Range Part #0 ... 50 InWC 8367656 10746040 ... 100 InWC 8341481 12506160 ... 5 psi 8415072 12469760 ... 10 psi 8642885 12443640 ... 15 psi 8643628 13739950 ... 25 psi 8341995 12482010 ... 30 psi 8643636 12432150 ... 50 psi 8348868 12469780 ... 60 psi 8643644 10365010 ... 100 psi 8643652 12431190 ... 160 psi 8341155 15172040 ... 200 psi 8644918 12456370 ... 250 psi 8341163 1076642

Range Part #0 ... 300 psi 8341732 12432160 ... 400 psi 8341953 15910090 ... 500 psi 8341740 10529280 ... 600 psi 8347128 12432120 ... 750 psi 4294930 12457190 ... 1,000 psi 8610007 10465280 ... 1,500 psi 8341219 13817450 ... 2,000 psi 8353098 15199300 ... 3,000 psi 8342275 10543300 ... 5,000 psi 8340638 10529270 ... 8,000 psi 8341864 10563540 ... 10,000 psi 8347242 15379290 ... 15,000 psi 8359143 1245638

S-20 High PerformanceIndustrial Pressure TransmitterStandard featuresSignal output: 4-20 mA 2-wireSupply voltage: 8-36 VDCProcess connection: 1/2 NPT maleNon-linearity: ≤ ± 0.25% B.F.S.L.Electrical connection: DIN EN 175301-803 (DIN 43 650) with plug connector

Range Part #-30 InHg ... 0 vacuum 52375595 1590979-30 InHg ... 30 psi 52375609 15909810 ... 10 psi 52376460 15909830 ... 30 psi 52376486 15909840 ... 60 psi 52375293 15909480 ... 100 psi 52374301 15909500 ... 160 psi 52375315 15909510 ... 200 psi 52375323 15909520 ... 300 psi 52375340 15909530 ... 500 psi 52375366 15909540 ... 1,000 psis 52375391 15909860 ... 3,000 psis 52375421 15909870 ... 5,000 psis 52375455 15909880 ... 10,000 psis 52375471 1590989

A-10 General PurposePressure Transmitter Standard featuresSignal output: 4-20 mA 2-wireSupply voltage: 8-30 DC Process connection: 1/4 NPT MaleElectrical connection: DIN EN 175301-803 (DIN 43 650) with plug connectorNon-linearity: ≤ ± 0.5% B.F.S.L.

Range Part #0 ... 15 psi 50426397 15786050 ... 25 psi 50426401 15247320 ... 50 psi 50426427 15153430 ... 100 psi 50372475 15153420 ... 200 psi 50398083 15131720 ... 300 psi 50426460 15786060 ... 500 psi 50426478 15697130 ... 1,000 psi 50426486 10596830 ... 1,500 psi 50426494 15786070 ... 2,000 psi 50426508 15786080 ... 3,000 psi 50426516 15598480 ... 5,000 psi 50372483 15565810 ... 10,000 psi 50426532 1549157

E-10 Explosion ProofPressure TransmitterStandard featuresSignal output: 4-20mA, 2-wireSupply voltage: 10-30 VDCProcess connection: 1/4” NPT maleElectrical connection: 1/2” male conduit with cable

Range Part #30”-0-30 psi 4217172 157859430”-0-100 psi 50116703 157859515 psi 50792261 157859660 psi 4363082 1578597100 psi 4363090 1578598200 psi 4364844 1088336300 psi 4363103 1578599500 psi 4363111 15786001,000 psi 4363129 15786011,500 psi 4363137 15786022,000 psi 4363146 15786033,000 psi 4202506 10857085,000 psi 4363155 11014098,000 psi 4363163 157860410,000 psi 4363171 1292830

*Womack part numbers listed in Red. Missing part numbers will be created when an order is placed.*All items are stocked. Inventory may vary.

*Womack part numbers listed in Red. Missing part numbers will be created when an order is placed.*All items are stocked. Inventory may vary.

*Womack part numbers listed in Red. Missing part numbers will be created when an order is placed.*All items are stocked. Inventory may vary.

R

R

WIKA - WomackEasy Order Guide

Easy Order Guide

R

www.wika.comwww.womackmachine.com | (800) 569-9801www.shop.womackmachine.com WOM10 150 09/2014

Mini Needle Valve - 910.11.100Standard featuresMedia Temp: max. 200°F (+93°C); min. 0°F (-18°C) Flow Rate: Max. Cv = 0.42Orifice Size: 0.172” (4.37mm) Pressure Rating: 10,000 psiValve Body: 316 SS, electropolishedBonnet: 316 SS, electropolishedValve Stem: 316 SS, electropolishedHandle: T, 316 SS, electropolishedHandle Bolt: Stainless steelStem Seals: Viton® O-ring, Teflon® back-up ring

Type 910.11.100 mini-needle valves can be used to isolate a pressure instrument from the application where space is limited. Carbon steel and stainless steel

mini-valves supplied with T-handle.

flow

Type 910.11.100Mini Needle Valves

Connection Body Material Size Part NumberMale-Female

Stainless steel 1/4" NPT 4266235 1077581

Type 910.24Mini-Siphon

Body Material Conn. Size Pressure Rating Temp. Rating Part NumberStainless steel 1/2" NPT 6,092 psi 1,062 °F 50673670 1578609

Mini Siphon - 910.24Standard featuresMaterials: Body: 316 Ti SS (1.4571) Internal Chamber: 316 Ti SS (1.4571)Mounting Position: Vertical or horizontalConnection: 1/2” NPT-male to 1/2” NPT-female Flow: Male to female connectionInlet Orifice: 0.1575” (4mm)Maximum Media Pressure: 6,092 psi @ 212 °FMaximum Media Temperature: 1,062 °F at 2,611 psi

The WIKA mini-siphon is designed specifically to replace the conventional pigtail and coil siphon. The mini-siphon has a thermal barrier which protects the pressure gauge from harmful steam, hot vapors and liquids, and contains a unique inner chamber that reduces pressure surges and “water hammer”. The mini–siphon also eliminates gauge whip and vibration that is typically found on traditional siphons by mounting the gauge closer to the process.

TI.303” Case

Type TI.30Connection 1/2" NPT Back

Dial Size 3"Stem Length 2½" 4" 6"0/250 °F 30025D206G4 1036682 30040D206G4 1547644 30060D206G4 108346250/550 °F 30025D216G4 1038751 30040D216G4 1247071 30060D216G4 1440931

Bimetal Thermometers - SS CaseStandard featuresSize: 3”Case: 304 SSDial: Anti-parallax, heavy gauge aluminum with white matte finishExternal Reset: Slotted hex adjustmentWindow: Fully gasketed glassHermetic Seal: Per ASME B40.3, NEMA 4XStem: ¼” diameter; 304 SS, TIG welded at tip and case connection. Dampening: Inert gel to minimize pointer oscillationAccuracy: +1% full range span (ASME B40.3 Standard)

WIKA bimetal thermometers are ideal for most rugged industrial temperature measurement applications. The hermetically-sealed case offers protection from weather and dust, and is guaranteed against fogging up. WIKA type TI.30 thermometers are guaranteed for 7 years.

*Womack part numbers listed in Red. Missing part numbers will be created when an order is placed.*All items are stocked. Inventory may vary.

*Womack part numbers listed in Red. Missing part numbers will be created when an order is placed.*All items are stocked. Inventory may vary.

Profile Ring

Type 213.40Dial Size 2½”

0659665 1555263

Type 2XX.53Dial Size 2½”

9092331 1076121

U-Clamp Panel Mount Kit -Model 213.40

U-Clamp Panel Mount - Model 2XX.53

Standard featuresProfile Ring: Steel chrome-platedScrews (M2.6 x 3): Steel nickel-platedU-Clamp Bracket: Steel zinc-platedPrior to installation, the factory-installed covering must be removed.

Standard featuresU-Clamp Bracket: Steel zinc-platedNo modifications to the pressure gauge are needed for installation.

U-Clamp

Two case screws

(not to scale)

U-Clamp

R

WIKA - WomackEasy Order Guide

Easy Order Guide

R

www.wika.comwww.womackmachine.com | (800) 569-9801www.shop.womackmachine.com WOM10 150 09/2014

Mini Needle Valve - 910.11.100Standard featuresMedia Temp: max. 200°F (+93°C); min. 0°F (-18°C) Flow Rate: Max. Cv = 0.42Orifice Size: 0.172” (4.37mm) Pressure Rating: 10,000 psiValve Body: 316 SS, electropolishedBonnet: 316 SS, electropolishedValve Stem: 316 SS, electropolishedHandle: T, 316 SS, electropolishedHandle Bolt: Stainless steelStem Seals: Viton® O-ring, Teflon® back-up ring

Type 910.11.100 mini-needle valves can be used to isolate a pressure instrument from the application where space is limited. Carbon steel and stainless steel

mini-valves supplied with T-handle.

flow

Type 910.11.100Mini Needle Valves

Connection Body Material Size Part NumberMale-Female

Stainless steel 1/4" NPT 4266235 1077581

Type 910.24Mini-Siphon

Body Material Conn. Size Pressure Rating Temp. Rating Part NumberStainless steel 1/2" NPT 6,092 psi 1,062 °F 50673670 1578609

Mini Siphon - 910.24Standard featuresMaterials: Body: 316 Ti SS (1.4571) Internal Chamber: 316 Ti SS (1.4571)Mounting Position: Vertical or horizontalConnection: 1/2” NPT-male to 1/2” NPT-female Flow: Male to female connectionInlet Orifice: 0.1575” (4mm)Maximum Media Pressure: 6,092 psi @ 212 °FMaximum Media Temperature: 1,062 °F at 2,611 psi

The WIKA mini-siphon is designed specifically to replace the conventional pigtail and coil siphon. The mini-siphon has a thermal barrier which protects the pressure gauge from harmful steam, hot vapors and liquids, and contains a unique inner chamber that reduces pressure surges and “water hammer”. The mini–siphon also eliminates gauge whip and vibration that is typically found on traditional siphons by mounting the gauge closer to the process.

TI.303” Case

Type TI.30Connection 1/2" NPT Back

Dial Size 3"Stem Length 2½" 4" 6"0/250 °F 30025D206G4 1036682 30040D206G4 1547644 30060D206G4 108346250/550 °F 30025D216G4 1038751 30040D216G4 1247071 30060D216G4 1440931

Bimetal Thermometers - SS CaseStandard featuresSize: 3”Case: 304 SSDial: Anti-parallax, heavy gauge aluminum with white matte finishExternal Reset: Slotted hex adjustmentWindow: Fully gasketed glassHermetic Seal: Per ASME B40.3, NEMA 4XStem: ¼” diameter; 304 SS, TIG welded at tip and case connection. Dampening: Inert gel to minimize pointer oscillationAccuracy: +1% full range span (ASME B40.3 Standard)

WIKA bimetal thermometers are ideal for most rugged industrial temperature measurement applications. The hermetically-sealed case offers protection from weather and dust, and is guaranteed against fogging up. WIKA type TI.30 thermometers are guaranteed for 7 years.

*Womack part numbers listed in Red. Missing part numbers will be created when an order is placed.*All items are stocked. Inventory may vary.

*Womack part numbers listed in Red. Missing part numbers will be created when an order is placed.*All items are stocked. Inventory may vary.

Profile Ring

Type 213.40Dial Size 2½”

0659665 1555263

Type 2XX.53Dial Size 2½”

9092331 1076121

U-Clamp Panel Mount Kit -Model 213.40

U-Clamp Panel Mount - Model 2XX.53

Standard featuresProfile Ring: Steel chrome-platedScrews (M2.6 x 3): Steel nickel-platedU-Clamp Bracket: Steel zinc-platedPrior to installation, the factory-installed covering must be removed.

Standard featuresU-Clamp Bracket: Steel zinc-platedNo modifications to the pressure gauge are needed for installation.

U-Clamp

Two case screws

(not to scale)

U-Clamp