standard catalog 2008 3rd edition - denco sales
TRANSCRIPT
S I G N E X T R U S I O N S A N D K I T S
StandardProduct
3rd Edition
STANDARD MOLDINGS
SIGN CABINETS
CHANNEL LETTER RACEWAYS
VANDAL SYSTEMS
S T A N D A R D E X T R U S I O N S
Standard System Configurations
2
1Part Bodies
2Part Retainer
2Part Extended Retainer/2Part Extended Frame & Cover
2Part Large Extended Retainer
2Part Vandal Systems
2Part Large Vandal Systems
2Part Vandal Systems w/2Part Extended Retainer
2Part Large Vandal Systems w/2Part Large Extended Retainer
1Part 12” Body
2Part 12” Body
1Part 9” Body
2Part 9” Body
1Part 8” S/F Body 1Part 6” S/F Body
2Part 8” S/F Body 2Part 6” S/F Body
12”
12”
9”
9”
8”
8”
10-1/4”13-5/8”16-5/8”
9”11”14”
10-1/4”13-5/8”16-5/8”
10-1/4”13-5/8”16-5/8”
9”14” 11”
9”11”14”
6”
6”
7”
8-1/4”
7”
7”
8-1/4”
8-1/4”
Extrusions Priced by the Length
Extrusions are available in full lengths only.
3
PartPartNumber Length
Sign Cabinet Bodies
Retainers
Vandal Systems
Mill Finish Pre-painted
1Part 12” Double FaceBody
1924 24’-6” $268.88 $345.10Cost per Foot 10.97 14.09
2Part Retainer
2Part Extended Retainer
2Part Extended Frame
2Part Large Extended Retainer
1944
1940
1955
1939
24’-6”
24’-6”
24’-6”
24’-6”
25.25
86.41
54.53
115.25
33.23
113.76
70.76
151.73
Cost per Foot
Cost per Foot
Cost per Foot
Cost per Foot
1.03
3.53
2.23
4.70
1.36
4.64
2.89
6.19
2Part 12” Double FaceBody
1929 24’-6” 206.79 265.40Cost per Foot 8.44 10.83
1Part 9” Double FaceBody
1923 24’-6” 217.33 283.04Cost per Foot 8.87 11.55
2Part 9” Double FaceBody
1928 24’-6” 161.37 210.15Cost per Foot 6.59 8.58
1Part 8” Single FaceBody
1Part 6” Single FaceBody
1922
1921
24’-6”
24’-6”
188.46
158.90
245.43
206.56
Cost per Foot
Cost per Foot
7.69
6.49
10.02
8.43
2Part 8” Single FaceBody
2Part 6” Single FaceBody
1927
1926
24’-6”
24’-6”
156.89
127.62
205.01
165.90
Cost per Foot
Cost per Foot
6.40
5.21
8.37
6.77
2Part Inner Frame
2Part Large Inner Frame
1960
1959
24’-6”
24’-6”
60.36
146.40
78.61
190.66
Cost per Foot
Cost per Foot
2.46
5.98
3.21
7.78
2Part Outer Frame
2Part Large Outer Frame
1942
1941
24’-6”
24’-6”
47.06
106.27
61.50
138.90
Cost per Foot
Cost per Foot
1.92
4.34
2.51
5.67
S T A N D A R D E X T R U S I O N S
Extrusions Priced by the Length
Extrusions are available in full lengths only.
4
PartPartNumber Length Mill Finish Pre-painted
Channel Letter Raceways
S T A N D A R D E X T R U S I O N S
Dividers 2Part Divider 1905 24’-2” $57.13 $71.55Cost per Foot 2.36 2.96
1-1/2” Standard Divider 1910 24’-5” 37.25 N/ACost per Foot 1.53 N/A
2-1/2” Standard Divider 1920 24’-5” 53.61 N/ACost per Foot 2.20 N/A
1 Piece 8” Channel LetterRaceway
1980 24’-2” 394.76 N/ACost per Foot 16.33 N/A
2 Piece 8” Channel LetterRaceway - Front
1981 24’-2” 125.17 N/ACost per Foot 5.18 N/A
2 Piece 8” Channel LetterRaceway - Back
1982 24’-2” 138.05 N/ACost per Foot 5.71 N/A
2 Piece 5” Channel LetterRaceway - Front
1971 24’-2” 78.06 N/ACost per Foot 3.23 N/A
2 Piece 5” Channel LetterRaceway - Back
1972 24’-2” 86.89 N/ACost per Foot 3.60 N/A
2 Piece 5” Narrow Channel Letter Raceway - Back
1972N 24’-2” 72.51 N/ACost per Foot 3.00 N/A
2 Piece 8” Narrow Channel Letter Raceway - Back
1982N 24’-2” 114.96 N/ACost per Foot 4.76 N/A
8” Channel Letter Raceway Cover8” Narrow Channel Letter Raceway Cover5” Channel Letter Raceway Cover
5” Narrow Channel Letter Raceway Cover
5” Channel Letter Raceway Brace/Bracket
1986
1986N
1976
1976N
1974
24’-3”
24’-3”
24’-3”
24’-3”
12’-2”
60.06
36.85
41.82
27.35
21.81
N/A
N/A
N/A
N/A
N/A
Cost per Foot
Cost per Foot
Cost per Foot
Cost per Foot
Cost per Foot
2.48
1.52
1.72
1.13
1.79
N/A
N/A
N/A
N/A
N/A
Channel Letter RacewayMounting Clip
1989 12'-0” 22.78 N/ACost per Foot 1.90 N/A
Channel Letter RacewayLarge Mounting Clip
1988 12'-0” 33.85 N/ACost per Foot 2.82 N/A
5” Narrow Channel Letter Raceway Brace/Bracket
1974N 12’-2” 13.96 N/ACost per Foot 1.15 N/A
8” Channel Letter Raceway Brace/Bracket
8” Narrow Channel Letter Raceway Brace/Bracket
1979
1979N
12’-2”
12’-2”
29.91
17.48
N/A
N/A
Cost per Foot
Cost per Foot
2.46
1.44
N/A
N/A
Extrusions Priced by the Length
Extrusions are available in full lengths only.
5
PartPartNumber Length
Standard Moldings
Wall Frames
Socket Raceways
Mill Finish Pre-painted
1-3/8” L-Molding
3/4” Wall Frame(Clear Anodized)
1943
1948
24’-5”
24’-2”
25.99
49.11
*34.21
N/A
Cost per Foot
Cost per Foot
1.06
2.03
1.40
N/A
1” H-Molding
1-3/8” Wall Frame(Clear Anodized)
1945
1949
24’-2”
24’-2”
23.71
61.97
31.22
N/A
Cost per Foot
Cost per Foot
0.98
2.56
1.29
N/A
1” Z-Molding
Socket Raceway Cover
1946
1987
24’-2”
24’-2”
28.48
9.84
37.49
N/A
Cost per Foot
Cost per Foot
1.18
0.41
1.55
N/A
1.5” Z-Molding 1947 24’-2” 42.23 54.81Cost per Foot 1.75 2.27
Socket Raceway 1984 24’-2” $66.34 N/ACost per Foot 2.75 N/A
Socket Raceway II 1985 24’-2” 39.63 N/ACost per Foot 1.64 N/A
PartPartNumber Price Each
Components
Standard System Accessories
S T A N D A R D E X T R U S I O N S
*NOTE: 1-3/8” L-Molding is pre-painted matte black.
1Part 2Part 12” Body Corner Angle1-3/4” x 1-3/4” x 1/4” (9-5/16”)
1Part 2Part 9” Body Corner Angle1-3/4” x 1-3/4” x 1/4” (6-5/16”)
1Part 2Part 8” S/F Body Corner Angle1-3/4” x 1-3/4” x 1/4” (6-3/16”)
1Part 2Part 6” S/F Body Corner Angle1-3/4” x 1-3/4” x 1/4” (4-3/16”)
5977
5978
5979
5981
$5.22
4.01
3.98
3.32
Large Socket Raceway 1983 24’-2” 46.18 N/ACost per Foot 1.91 N/A
Edge Lit LED ProfilesEdge Lit LED1/2 Round
1995 12’-2” 83.75 N/ACost per Foot 6.88 N/A
Edge Lit LED1/4 Round
1996 12’-2” 68.64 N/ACost per Foot 5.64 N/A
Standard System Accessories
6
PartPartNumber
PriceEach
Components (cont.)
1Part 2Part 12” Body Ballast Pan7-11/16” x 24” x .063
1Part 2Part 9” Body Ballast Pan4-5/8” x 24” x .063
1Part 2Part 8” S/F Body Ballast Pan4-5/8” x 24” x .063
1Part 2Part 6” S/F Body Ballast Pan3-1/2” x 24” x .063
5970
5971
5971
5969
Divider Corner Angle1-3/4” x 1-3/4” x 1/4” (1-1/16”) w/Notches
Frame Corner Angle1-3/4” x 1-3/4” x 1/4” (1-1/16”)
5300
5305
Channel Letter Raceway 3” Mounting ClipChannel Letter Raceway 3” Large Mounting Clip
5989
5988
1Part 2Part 12” Body Raceway Cover9-7/8” x 48” x .040 (white) Blank
1Part 2Part 9” Body Raceway Cover6-7/8” x 48” x .040 (white) Blank
1Part 2Part 8” S/F Body Raceway Cover6-1/2” x 48” x .040 (white) Blank
1Part 2Part 6” S/F Body Raceway Cover4-3/4” x 48” x .040 (white) Blank
Edge Lit LED 1/4 Round Cap2-1/8” x 1-9/16” x .090
Edge Lit LED 1/2 Round Cap3-1/4” x 1-9/16” x .090
5984B-12”
5903
5905
5984B-9”
5984B-8”
5984B-6”
S T A N D A R D E X T R U S I O N S
Corner Key.120 Stamped Aluminum
5210
2Part Outer Frame Corner Angle2” x 2” x 1/8” (3/8”)
5975
15.27
13.36
13.36
11.84
1.24
1.00
5” Channel Letter Raceway Lifting Bracket1-3/4” x 1-3/4” x 1/4” (4-3/8”)
5976-5” 3.13
8” Channel Letter Raceway Lifting Bracket1-3/4” x 1-3/4” x 1/4” (6-3/8”)
5976-8” 3.52
8” Channel Letter Raceway Brace/Bracket2” x 6-3/4” x .090
5972-8” 1.82
8” Narrow Channel Letter Raceway Brace/Bracket2” x 3-13/16” x .090
5972N-8” 1.67
5” Channel Letter Raceway Brace/Bracket2” x 4-13/16” x .090
5972-5” 1.42
1.07
1.32
13.55
4.11
4.11
9.17
8.41
6.75
$0.70
1.00
8” 1 Piece Channel Letter Raceway Brace2” x 6-3/16” x .090
5972(1PC)-8” 1.82
5” Narrow Channel Letter Raceway End Cap5-1/2” x 3-1/2” x .090
5987N-5” 6.29
5” Channel Letter Raceway End Cap5-1/2” x 5-3/8” x .090
5987-5” 7.28
8” Channel Letter Raceway End Cap8-1/2” x 7-1/4” x .090
8” Narrow Channel Letter Raceway End Cap8-1/2” x 4-3/8” x .090
5987-8”
5987N-8”
9.06
8.24
8” 1 Piece Channel Letter Raceway End Cap8-1/2” x 7-1/4” x .090
5987(1PC)-8” 9.06
5” Narrow Channel Letter Raceway Brace/Bracket2” x 2-15/16” x .090
5972N-5” 1.03
Standard System Accessories
7
PartPartNumber
PriceEach
Hardware
Locks
2Part Hinge1-1/16” x 96” x .060 Aluminum Hinge
2Part Large Hinge1-1/2” x 96” x .063 Aluminum Hinge
59965996P59975997P
2Part Retainer Screw2Part Extended Retainer ScrewRaceway Cover ScrewRaceway End Cap Screw#8 x 1/2” Square/Phillips Pan Head Steel Zinc Screw-Type A
1Part/2Part Corner Angle Screw#10 x 1/2” Square/Phillips Pan Head Stainless Steel Screw - Type AB
52905290P
5218
2Part Outer Frame Corner Angle Screw#8 x 3/8” Square/Phillips Counter Sunk Stainless Steel Screw - Type ALED Cap Screw#6 x 3/8” Square/Phillips Counter Sunk Stainless Steel Screw - Type ALED Spring Pin3/32” x 5/8” stainless steel
2Part Extended Retainer Corner Screw#8 x 3/4” Square/Phillips Counter Sunk Stainless Steel Screw - Type A
Wall Frame Corner Screw#6 x 3/4” Square/Phillips Counter Sunk Stainless Steel Screw - Type A
5990
5940
5945
5241
5245
2Part Lock 5994
2Part Large Lock
2Part Lock WrenchFor use with 2Part Lock Part #5994
5993
5992
Components (cont.)
1Part 2Part 8” S/F Body Raceway Cover6-1/2” x 48” x .040 (white) Pre-Punched 12” O/C
1Part 2Part 6” S/F Body Raceway Cover4-3/4” x 48” x .040 (white) Pre-Punched 12” O/C
1Part 2Part 8” S/F Body Raceway Cover6-1/2” x 36” x .040 (white) Pre-Punched 12” O/C
1Part 2Part 6” S/F Body Raceway Cover4-3/4” x 36” x .040 (white) Pre-Punched 12” O/C
1Part 2Part 8” S/F Body Raceway Cover6-1/2” x 24” x .040 (white) Pre-Punched 12” O/C
1Part 2Part 6” S/F Body Raceway Cover4-3/4” x 24” x .040 (white) Pre-Punched 12” O/C
5984-8”
5984-6”
5983-8”
5983-6”
5982-8”
5982-6”
1Part 2Part 9” Body Raceway Cover6-7/8” x 48” x .040 (white) Pre-Punched 12” O/C
1Part 2Part 9” Body Raceway Cover6-7/8” x 36” x .040 (white) Pre-Punched 12” O/C
1Part 2Part 9” Body Raceway Cover6-7/8” x 24” x .040 (white) Pre-Punched 12” O/C
5984-9”
5983-9”
5982-9”
1Part 2Part 12” Body Raceway Cover9-7/8” x 48” x .040 (white) Pre-Punched 12” O/C
1Part 2Part 12” Body Raceway Cover9-7/8” x 36” x .040 (white) Pre-Punched 12” O/C
1Part 2Part 12” Body Raceway Cover9-7/8” x 24” x .040 (white) Pre-Punched 12” O/C
5984-12”
5983-12”
5982-12”
13.6624.5819.5130.58
7.00/10016.00/100
17.00/100
8.41
8.61
6.92
6.00/100
5.00/100
6.00/100
6.00/100
6.00/100
12.25
10.38
11.36
9.69
8.69
7.79
12.80
11.78
8.97
$16.21
14.21
10.67
S T A N D A R D E X T R U S I O N S
NOTE: Parts 5996P & 5997P are dark bronze anodized. Part 5290P is pre-painted dark bronze.
Standard System Specifications
NOTE: It is recommended to cut bodies and retainers 1-3/4” over nominal T-12 lamp length to utilize .040 flat aluminum raceway covers.
8
Sign Cabinet Body Extrusions
2Part 8” Single Face BodyPart #1927
2Part RetainerPart #1944
2Part 6” Single Face BodyPart #1926
2Part RetainerPart #1944
1Part 8” Single Face BodyPart #1922
1Part 6” Single Face BodyPart #1921
6-1/4”
4-1/4”
4-5/8”
3-5/8”
8”
1-5/
8”
.040AluminumBack
.040AluminumBack
Raceway CoverPart #5984B-8”
1/4" Joiner Bracket
Raceway CoverScrewPart #5290
Retainer ScrewPart #5290
Retainer ScrewPart #5290
OptionalCorner KeyPart #5210
5/16”
2Part 9” Double Face BodyPart #1928
2Part RetainerPart #1944
1Part 9” Double Face BodyPart #1923
Corner AnglePart #5978
Corner AnglePart #5979
Corner AnglePart #5981
Retainer ScrewPart #5290
5-1/2”
4-3/4”
9”
1-5/
8”
2Part 12” Double Face BodyPart #1929
2Part RetainerPart #1944
1Part 12” Double Face BodyPart #1924
Ballast PanScrewPart #5290
Ballast PanPart #5970
Corner AnglePart #5977 Corner Key
Part #5210
Retainer ScrewPart #5290
8-1/2”
7-3/4”
12”
1-5/
8”
5/16”
5/16”
1”
1”
1”
Corner AngleScrew
Part #5218
Corner KeyPart #5210
Corner KeyPart #5210
Corner KeyPart #5210
OptionalCorner KeyPart #5210
OptionalCorner KeyPart #5210
1/4” Steel Mounting Plate
S T A N D A R D E X T R U S I O N S
6”
1-5/
8”
Raceway CoverPart #5984B-6”
Raceway CoverScrewPart #5290
OptionalCorner KeyPart #5210
5/16”
3/8”
3/8”
3/8”
3/8”
1” 1/4” JoinerBracket
Corner KeyPart #5210
Corner KeyPart #5210
7/16” Bolt
Standard System Specifications
9
2Part DividerPart #1905
11/1
6”
1-5/
8”
5/16”
Dividers
NOTE: It is recommended to use safety chains and prop-bars on hingeable faces.
2Part Large Extended Retainer Part #1939
Retainer ScrewPart #5290
Corner KeyPart #5210
2”
4”
1-1/
4”
Frame Corner AnglePart #5305
Retainers2Part RetainerPart #1944
2Part Extended Frame/2Part RetainerPart #1955 Part #1944
Retainer ScrewPart #5290
Corner KeyPart #5210
1-3/4”
3/8”
1”
2Part Extended Retainer Part #1940
Retainer ScrewPart #5290
Corner KeyPart #5210
1-5/
8”2-3/4”
3/16” 3/16”
3/16”
1/4”
3/16”
3/16”
1/4”
1/4”
3/16”
1-1/
16”
Frame Corner AnglePart #5305
2Part Extended RetainerPart #1940
2Part Vandal SystemParts #1960 and Part #1942
2Part Large Extended RetainerPart #1939
2Part Large Vandal SystemParts #1959 and Part #1941
Retainer ScrewPart #5290or3/8” x 3/16” PopRivet
4”
3/8”
2-13
/16”
4-13
/16”
2”
Corner AngleScrew
Part #5218
Frame Corner AnglePart #5305
Frame Corner AnglePart #5305
Corner KeyPart #5210
Retainer ScrewPart #5290or3/8” x 3/16” PopRivet
2-3/4”
2Part HingePart #5996
3/8”
2”
3-5/
8”
1-5/
8"
Corner AngleScrew Part #5990
2Part InnerFrame Part #1960
2Part Large Inner Frame Part #1959
2Part ExtendedRetainer Part #1940
2Part LargeExtendedRetainer Part #1939
2Part OuterFrame
Part #1942
Frame Corner AnglePart #5305
Corner KeyPart #5210
2Part Outer Frame Corner Angle
Part #5975
2PartLarge Hinge
Part #5997
2Part Large Outer Frame
Part #1941
S T A N D A R D E X T R U S I O N S
Retainer ScrewPart #5290
1-5/
8”
1-3/4”
2-3/4”
1-1/
16”
Corner KeyPart #5210
Frame Corner AnglePart #5305
Cover ScrewPart #5195
3/16”
Divider AnglePart #5300
Vandal Systems2Part Inner FramePart #1960
Retainer ScrewPart #5290
2Part HingePart #5996
Corner AngleScrew Part #5990
2-3/4”
3/8”
2”
2Part Outer Frame with 2Part LockPart #1942 Part #5994
2 Part LockPart #5994
1-1/16”
2-1/4”
1-3/
8”
1/4”
3/16”
1/4”
1-3/
16”
2 Part OuterFrame Corner
AnglePart #5975
Standard System Specifications
10
2Part Large Inner FramePart #1959 Retainer Screw
Part #5290
Retainer ScrewPart #5290
Retainer ScrewPart #5290
2PartLarge Hinge
Part #5997
4”
3/8”
2-13
/16”
1/4”
2”
Frame CornerAngle
Part #5305
Corner KeyPart #5210
Corner KeyPart #5210
2Part Large Outer Frame with 2Part Large LockPart #1941 Part #5993
2Part Large Vandal System with Gas Support
2-3/
16”
1”
1/4”
1/4”
2PartLarge Lock
Part #5993
Frame CornerAngle
Part #5305
Retainer ScrewPart #5290
Ball Stud MountingBracket ScrewPart #5290
Gas Support(See part listingsfor part numbers
)see page 29
Ball StudPart #5938
Ball StudPart #5938
Ball StudMountingBracketPart #5939
VandalCover
InnerFace
1/4”
Corner KeyPart #5210
2 Part Outer Frame Corner Angle
Part #5975Corner AngleScrew Part #5990
NOTE: It is recommended to use safety chains and prop-bars on hingeable faces.
S T A N D A R D E X T R U S I O N S
NOTE:The Inner Frames retain the inner face which is typically the translucent white face for a changeable copy system.
The Outer Frames retain the vandal cover or outer face which is typically a clear lens.
3/16”
1/4”
11
Edge Lit LED Profiles
Moldings
Wall Frames Standard Dividers
1” H-MoldingPart #1945
Edge Lit LED 1/2 RoundPart #1995
Edge Lit LED 1/4 RoundPart #1996
1” Z-MoldingPart #1946
1-3/8” Wall FramePart #1949
1.5” Z-MoldingPart #1947
1/4”
3/8”
1-1/
2”
1”
1/4”
3/4”
1-3/
4”
1”
1/4”
3/4”
2-1/
4”
1-1/
2”
Corner KeyPart #5210
Standard System Specifications
1-3/8” L-MoldingPart #1943
1-3/8”
5/16”
1-3/
8”
Standard Angle
1” Tube
3/4” Wall FramePart #1948
1-7/
8”
1/2”
3/4”
3/16”
3/4”
2”
1-3/
8”
3/8”
S T A N D A R D E X T R U S I O N S
1-1/2” DividerPart #1910
5/16”
11/1
6”
1-1/
2”
1”
2-1/2” DividerPart #1920
5/16”
1-3/
16”
2-1/
2”
1”
For use with fabricated angle construction.
2” 2”
3-1/4” 2-1/8”
1-9/
16”
1-9/
16”
1/2” 1/2”
LED Spring PinPart #5945
LED Spring PinPart #5945
1/2” Clear 1/2” Clear
LED Unit LED Unit
.040 AluminumStrip
.040 AluminumStrip
Corner KeyPart #5210
Corner KeyPart #5210
Standard System Specifications
12
Channel Letter Raceways
Socket Raceways
1 Piece 8” Channel Letter Raceway w/Raceway CoverPart #1980 Part#1986
2 Piece 5” Channel Letter Raceway w/Raceway CoverPart #1971 & 1972 Part#1976
Large Socket RacewayPart#1983 w/Socket Raceway CoverPart #1987
Socket Raceway IIPart#1985 w/Socket Raceway CoverPart #1987
2 Piece 8” Channel Letter Raceway w/Raceway CoverPart #1981 & 1982 Part #1986
Button orTombstoneType Socket
Socket RacewayPart#1984 w/Socket Raceway CoverPart #1987
Button orTombstone Type Socket
1” x 1” x 1/8” x 1/2”Aluminum angle formounting. (Optional)
2”
1-1/
4”
1-7/8”
1-1/
4”
S T A N D A R D E X T R U S I O N S
Button orTombstoneType Socket
Standard 1/2”Electrical Fitting
1-7/8”
1-11
/16”
4”
5-3/8”
4-1/
4”5-
1/2”
6-3/
4”
5” ChannelLetter Raceway Brace/BracketPart #5972-5”
4”
5-3/8”
4-1/
4”5-
1/2”
8-3/
16”
5” Channel LetterRaceway Lifting BracketPart #5976-5”
Channel Letter Raceway 3" Large
Mounting ClipPart #5988
Channel Letter Raceway3” Mounting ClipPart #5989
Optional sheetstock by
fabricator.
5-7/16”
7-3/16”
7-1/
8”8-
11/1
6”9-
3/4”
TransformerBracket(by fabricator)
8” 1 Piece ChannelLetter Raceway BracePart #5972(1PC)-8”
1/2”
2-1/8”
3-1/2”
4-1/
4”5-
1/2”
6-3/
4”
5” Narrow Channel Letter
RacewayBrace/BracketPart #5972N-5”
2 Piece 5” Narrow Channel Letter Raceway w/Raceway CoverPart #1971 & 1972N Part#1976N
2 Piece 8” Narrow Channel Letter Raceway w/Raceway CoverPart #1981 & 1982N Part#1976N
5-7/16”
7-3/16”
7-1/
4”8-
11/1
6” 11-3
/16”8” Channel Letter
Raceway Lifting BracketPart #5976-8”
8” Channel LetterRaceway Brace/BracketPart #5972-8”
1/2”
1/2”
Channel Letter
Raceway3" Large
MountingClip
Part #5988
Channel Letter Raceway3” Mounting ClipPart #5989
2-1/2”
4-3/8”
8” Narrow Channel LetterRaceway Brace/BracketPart #5972N-8”
7-1/
4”8-
11/1
6” 11-3
/16”
Unassembled 6” Single Face Kits
13
SizeHxW
SizeHxW
SizeHxW
SizeHxW
MillFinish
MillFinish
MillFinish
MillFinish
PrePaint
PrePaint
PrePaint
PrePaint
2 x 32 x 42 x 52 x 62 x 72 x 82 x 92 x 102 x 112 x 122 x 132 x 142 x 152 x 162 x 172 x 182 x 192 x 20
3 x 33 x 43 x 53 x 63 x 73 x 83 x 93 x 103 x 113 x 123 x 133 x 143 x 153 x 163 x 173 x 183 x 193 x 20
$114133153173192212231251271290310330349369388408428447
130150169189209228248267287307326346366385405424444464
$148173199224250275301326352377403428454479505530556581
169195220246271297322348373399424450475501526552577603
4 x 44 x 54 x 64 x 74 x 84 x 94 x 104 x 114 x 124 x 134 x 144 x 154 x 164 x 174 x 184 x 194 x 20
5 x 55 x 65 x 75 x 85 x 95 x 105 x 115 x 125 x 135 x 145 x 155 x 165 x 175 x 185 x 195 x 20
$166186205225245264284303323343362382401421441460480
202222241261281300320339359379398418437457477496
$216241267292318343369394420445471496522547573598624
263288314339365390416441467492518543569594620645
6 x 66 x 76 x 86 x 96 x 106 x 116 x 126 x 136 x 146 x 156 x 166 x 176 x 186 x 196 x 20
7 x 77 x 87 x 97 x 107 x 117 x 127 x 137 x 147 x 157 x 167 x 177 x 187 x 197 x 20
8 x 88 x 98 x 108 x 118 x 128 x 13
$238258277297317336356375395415434454473493513
274294313333352372392411431451470490509529
310330349369388408
$309335360386411437462488513539564590615641666
356382407433458484509535560586611637662688
403428454479505530
8 x 148 x 158 x 168 x 178 x 188 x 198 x 20
9 x 99 x 109 x 119 x 129 x 139 x 149 x 159 x 169 x 179 x 189 x 199 x 20
10 x 1010 x 1110 x 1210 x 1310 x 1410 x 1510 x 1610 x 1710 x 1810 x 1910 x 20
$428447467487506526545
346366385405424444464483503522542562
382402421441460480500519539558578
$556581607632658683709
450475501526552577603628654679705730
497522547573598624649675700726751
1Part 6” S/F Body and 2Part 6” S/F Body with 2Part RetainerPart #1921 Part #1926 Part #1944
Top, Bottom & 1 Side 1 Side
6” 1-3/4” 4-1/4”
Included in Sign Cabinet Kit Pricing:! Mill finish or Pre-Painted.! Three (3) pieces of cut to size and mitered 1Part 6" Single
Face Body, Part #1921.! One (1) piece of cut to size and mitered 2Part 6" Single Face
Body, Part #1926.! One (1) piece of cut to size and mitered 2Part Retainer,
Part #1944.! All screws required to assemble by mechanical fastening. Note: Raceway Cover Screws are not included.! All Body Corner Angles and/or Corner Keys required.! Packaging.
Not Included in Sign Cabinet Kit Pricing:! Face and Back.! Electrical Components.! Back Braces and Gussets.! Mounting Provisions.
Optional Accessories:! Ballast Pan(s). See page 6! Raceway Covers. See pages 6 & 7! Divider Bar. See pages 4, 9 & 29
Kit Sizes and Availability:! It is recommended to order kits 1-3/4" over nominal T-12
lamp size to utilize .040 flat Aluminum Raceway Covers.! Custom size kits may be cut to any dimension.
Recommended Lamp Spacing:! For flat plastic, illuminated backgrounds - 6” on center, using
T-12 lamps.! For pan formed faces use guideline for lamp spacing, see
General Information on page 31.! Always place lamps 3/4" from back of sign.
Cut To Size Divider:! See options page 29
General Information:! Finishes. See page 31! Additional information. See page 31! Cut to size and pre-cut kits are available locally through
select sign supply distributors.
S T A N D A R D K I T S
Unassembled 8” Single Face Kits
14
SizeHxW
SizeHxW
SizeHxW
SizeHxW
MillFinish
MillFinish
MillFinish
MillFinish
PrePaint
PrePaint
PrePaint
PrePaint
2 x 32 x 42 x 52 x 62 x 72 x 82 x 92 x 102 x 112 x 122 x 132 x 142 x 152 x 162 x 172 x 182 x 192 x 20
3 x 33 x 43 x 53 x 63 x 73 x 83 x 93 x 103 x 113 x 123 x 133 x 143 x 153 x 163 x 173 x 183 x 193 x 20
$136159182206229253276299323346370393416440463487510534
156179202226249273296319343366390413436460483507530553
$176207237268298328359389420450481511541572602633663694
202233263293324354385415446476506537567598628659689720
4 x 44 x 54 x 64 x 74 x 84 x 94 x 104 x 114 x 124 x 134 x 144 x 154 x 164 x 174 x 184 x 194 x 20
5 x 55 x 65 x 75 x 85 x 95 x 105 x 115 x 125 x 135 x 145 x 155 x 165 x 175 x 185 x 195 x 20
$199222246269293316339363386410433456480503527550573
242266289312336359383406429453476500523547570593
$259289319350380411441472502532563593624654685715745
315345376406437467497528558589619650680710741771
6 x 66 x 76 x 86 x 96 x 106 x 116 x 126 x 136 x 146 x 156 x 166 x 176 x 186 x 196 x 20
7 x 77 x 87 x 97 x 107 x 117 x 127 x 137 x 147 x 157 x 167 x 177 x 187 x 197 x 20
8 x 88 x 98 x 108 x 118 x 128 x 13
$286309332356379403426449473496520543566590613
329352376399423446469493516540563586610633
372396419442466489
$371402432463493523554584615645676706736767797
428458488519549580610641671701732762793823
484514545575606636
8 x 148 x 158 x 168 x 178 x 188 x 198 x 20
9 x 99 x 109 x 119 x 129 x 139 x 149 x 159 x 169 x 179 x 189 x 199 x 20
10 x 1010 x 1110 x 1210 x 1310 x 1410 x 1510 x 1610 x 1710 x 1810 x 1910 x 20
$513536560583606630653
416439462486509533556579603626650673
459482506529553576599623646670693
$667697727758788819849
540571601632662692723753784814845875
597627657688718749779810840871901
1Part 8” S/F Body and 2Part 8” S/F Body with 2Part RetainerPart #1922 Part #1927 Part #1944
Top, Bottom & 1 Side 1 Side
8” 1-3/4” 6-1/4”
Included in Sign Cabinet Kit Pricing:! Mill finish or Pre-Painted.! Three (3) pieces of cut to size and mitered 1Part 8" Single
Face Body, Part #1922.! One (1) piece of cut to size and mitered 2Part 8" Single Face
Body, Part #1927.! One (1) piece of cut to size and mitered 2Part Retainer,
Part #1944.! All screws required to assemble by mechanical fastening. Note: Raceway Cover Screws are not included.! All Body Corner Angles and/or Corner Keys required.! Packaging.
Not Included in Sign Cabinet Kit Pricing:! Face and Back.! Electrical Components.! Back Braces and Gussets.! Mounting Provisions.
Optional Accessories:! Ballast Pan(s). See page 6! Raceway Covers. See pages 6 & 7! Divider Bar. See pages 4, 9 & 29
Kit Sizes and Availability:! It is recommended to order kits 1-3/4" over nominal T-12
lamp size to utilize .040 flat Aluminum Raceway Covers.! Custom size kits may be cut to any dimension.
Recommended Lamp Spacing:! For flat plastic, illuminated backgrounds - 10" on center,
using T-12 lamps.! For pan formed faces use guideline for lamp spacing, see
General Information on page 31.! Always place lamps 3/4" from back of sign.
Cut To Size Divider:! See options page 29
General Information:! Finishes. See page 31! Additional information. See page 31! Cut to size and pre-cut kits are available locally through
select sign supply distributors.
S T A N D A R D K I T S
Unassembled 9” Double Face Kits
15
SizeHxW
SizeHxW
SizeHxW
SizeHxW
MillFinish
MillFinish
MillFinish
MillFinish
PrePaint
PrePaint
PrePaint
PrePaint
$152177202227252278303328353378403428453478503528553578
177202227252277302327352377402427452477502527552578603
$198231263296328361393426458491524556589621654686719751
230262295328360393425458490523555588621653686718751783
$226251276302327352377402427452477502527552577602627
276301326351376401426451476501526551577602627652
$294327359392425457490522555587620652685718750783815
359391424456489522554587619652684717749782815847
$326351376401426451476501526551576601626651676
375400425450475500525550575601626651676701
425450475500525550
$423456488521553586619651684716749781814846879
488520553585618650683716748781813846878911
552585617650682715
8 x 148 x 158 x 168 x 178 x 188 x 198 x 20
9 x 99 x 109 x 119 x 129 x 139 x 149 x 159 x 169 x 179 x 189 x 199 x 20
10 x 1010 x 1110 x 1210 x 1310 x 1410 x 1510 x 1610 x 1710 x 1810 x 1910 x 20
$575600625650675700725
474499524549574599625650675700725750
524549574599624649674699724749774
$747780813845878910943
617649682714747779812844877910942975
681714746779811844876909941974
1007
Top, Bottom & 1 Side 1 Side
9” 1-3/4” 5-1/2” 1-3/4”
2 x 32 x 42 x 52 x 62 x 72 x 82 x 92 x 102 x 112 x 122 x 132 x 142 x 152 x 162 x 172 x 182 x 192 x 20
3 x 33 x 43 x 53 x 63 x 73 x 83 x 93 x 103 x 113 x 123 x 133 x 143 x 153 x 163 x 173 x 183 x 193 x 20
4 x 44 x 54 x 64 x 74 x 84 x 94 x 104 x 114 x 124 x 134 x 144 x 154 x 164 x 174 x 184 x 194 x 20
5 x 55 x 65 x 75 x 85 x 95 x 105 x 115 x 125 x 135 x 145 x 155 x 165 x 175 x 185 x 195 x 20
6 x 66 x 76 x 86 x 96 x 106 x 116 x 126 x 136 x 146 x 156 x 166 x 176 x 186 x 196 x 20
7 x 77 x 87 x 97 x 107 x 117 x 127 x 137 x 147 x 157 x 167 x 177 x 187 x 197 x 20
8 x 88 x 98 x 108 x 118 x 128 x 13
1Part 9” D/F Body and 2Part 9” D/F Body with 2Part RetainerPart #1923 Part #1928 Part #1944
Included in Sign Cabinet Kit Pricing:! Mill finish or Pre-Painted.! Three (3) pieces of cut to size and mitered 1Part 9" Double
Face Body, Part #1923.! One (1) piece of cut to size and mitered 2Part 9" Double Face
Body, Part #1928.! Two (2) pieces of cut to size and mitered 2Part Retainer,
Part #1944.! All screws required to assemble by mechanical fastening. Note: Raceway Cover Screws are not included.! All Body Corner Angles and/or Corner Keys required.! Packaging.
Not Included in Sign Cabinet Kit Pricing:! Faces.! Electrical Components.! Internal Supports.
Optional Accessories:! Ballast Pan(s). See page 6! Raceway Covers. See pages 6 & 7! Divider Bar. See pages 4, 9 & 29
Kit Sizes and Availability:! It is recommended to order kits 1-3/4" over nominal T-12
lamp size to utilize .040 flat Aluminum Raceway Covers.! Custom size kits may be cut to any dimension.
Recommended Lamp Spacing:! For flat plastic, illuminated backgrounds - 7" on center, using
T-12 lamps.! For pan formed faces use guideline for lamp spacing, see
General Information on page 31.
Cut To Size Divider:! See options page 29
General Information:! Finishes. See page 31! Additional information. See page 31! Cut to size and pre-cut kits are available locally through
select sign supply distributors.
S T A N D A R D K I T S
Unassembled 12” Double Face Kits
16
SizeHxW
SizeHxW
SizeHxW
SizeHxW
MillFinish
MillFinish
MillFinish
MillFinish
PrePaint
PrePaint
PrePaint
PrePaint
$177206235264293322351380408437466495524553582611640669
206235264293321350379408437466495524553582610639668697
$230268306343381418456493531569606644681719756794831869
268305343380418455493531568606643681718756794831869906
$263292321350379408437466495524552581610639668697726
321350379408437465494523552581610639668697726754
$342380418455493530568605643681718756793831868906944
417455492530568605643680718755793831868906943981
$379407436465494523552581610639668696725754783
436465494523552581609638667696725754783812
494523551580609638
$492530567605642680718755793830868905943981
1018
567604642680717755792830867905943980
10181055
642679717754792830
8 x 148 x 158 x 168 x 178 x 188 x 198 x 20
9 x 99 x 109 x 119 x 129 x 139 x 149 x 159 x 169 x 179 x 189 x 199 x 20
10 x 1010 x 1110 x 1210 x 1310 x 1410 x 1510 x 1610 x 1710 x 1810 x 1910 x 20
$667696725754783812840
551580609638667696725753782811840869
609638667695724753782811840869898
$867905942980
101710551093
717754792829867904942980
1017105510921130
791829867904942979
10171054109211301167
1 SideTop, Bottom & 1 Side
12” 1-3/4” 1-3/4”8-1/2”
1Part 12” D/F Body and 2Part 12” D/F Body with 2Part RetainerPart #1924 Part #1929 Part #1944
2 x 32 x 42 x 52 x 62 x 72 x 82 x 92 x 102 x 112 x 122 x 132 x 142 x 152 x 162 x 172 x 182 x 192 x 20
3 x 33 x 43 x 53 x 63 x 73 x 83 x 93 x 103 x 113 x 123 x 133 x 143 x 153 x 163 x 173 x 183 x 193 x 20
4 x 44 x 54 x 64 x 74 x 84 x 94 x 104 x 114 x 124 x 134 x 144 x 154 x 164 x 174 x 184 x 194 x 20
5 x 55 x 65 x 75 x 85 x 95 x 105 x 115 x 125 x 135 x 145 x 155 x 165 x 175 x 185 x 195 x 20
6 x 66 x 76 x 86 x 96 x 106 x 116 x 126 x 136 x 146 x 156 x 166 x 176 x 186 x 196 x 20
7 x 77 x 87 x 97 x 107 x 117 x 127 x 137 x 147 x 157 x 167 x 177 x 187 x 197 x 20
8 x 88 x 98 x 108 x 118 x 128 x 13
Included in Sign Cabinet Kit Pricing:! Mill finish or Pre-Painted.! Three (3) pieces of cut to size and mitered 1Part 12" Double
Face Body, Part #1924.! One (1) piece of cut to size and mitered 2Part 12" Double
Face Body, Part #1929.! Two (2) pieces of cut to size and mitered 2Part Retainer,
Part #1944.! All screws required to assemble by mechanical fastening. Note: Raceway Cover Screws are not included.! All Body Corner Angles and/or Corner Keys required.! Packaging.
Not Included in Sign Cabinet Kit Pricing:! Faces.! Electrical Components.! Internal Supports.
Optional Accessories:! Ballast Pan(s). See page 6! Raceway Covers. See pages 6 & 7! Divider Bar. See pages 4, 9 & 29
Kit Sizes and Availability:! It is recommended to order kits 1-3/4" over nominal T-12
lamp size to utilize .040 flat Aluminum Raceway Covers.! Custom size kits may be cut to any dimension.
Recommended Lamp Spacing:! For flat plastic, illuminated backgrounds - 9" on center, using
T-12 lamps.! For pan formed faces use guideline for lamp spacing, see
General Information on page 31.
Cut To Size Divider:! See options page 29
General Information:! Finishes. See page 31! Additional information. See page 31! Cut to size and pre-cut kits are available locally through
select sign supply distributors.
S T A N D A R D K I T S
Unassembled 7” Single Face Kits
17
SizeHxW
SizeHxW
SizeHxW
SizeHxW
MillFinish
MillFinish
MillFinish
MillFinish
PrePaint
PrePaint
PrePaint
PrePaint
2 x 32 x 42 x 52 x 62 x 72 x 82 x 92 x 102 x 112 x 122 x 132 x 142 x 152 x 162 x 172 x 182 x 192 x 20
3 x 33 x 43 x 53 x 63 x 73 x 83 x 93 x 103 x 113 x 123 x 133 x 143 x 153 x 163 x 173 x 183 x 193 x 20
$141164187210232255278301324347369392415438461483506529
164187210233255278301324347369392415438461484506529552
$183213243272302332361391421450480510539569599629658688
213243273302332362391421451480510540569599629658688718
4 x 44 x 54 x 64 x 74 x 84 x 94 x 104 x 114 x 124 x 134 x 144 x 154 x 164 x 174 x 184 x 194 x 20
5 x 55 x 65 x 75 x 85 x 95 x 105 x 115 x 125 x 135 x 145 x 155 x 165 x 175 x 185 x 195 x 20
$210233255278301324347370392415438461484507529552575
256278301324347370393415438461484507530552575598
$273302332362392421451481510540570599629659688718748
332362392421451481510540570599629659688718748778
6 x 66 x 76 x 86 x 96 x 106 x 116 x 126 x 136 x 146 x 156 x 166 x 176 x 186 x 196 x 20
7 x 77 x 87 x 97 x 107 x 117 x 127 x 137 x 147 x 157 x 167 x 177 x 187 x 197 x 20
8 x 88 x 98 x 108 x 118 x 128 x 13
$301324347370393416438461484507530553575598621
347370393416439461484507530553576598621644
393416439462484507
$392422451481511540570600629659689718748778807
451481511540570600630659689719748778808837
511541570600630659
8 x 148 x 158 x 168 x 178 x 188 x 198 x 20
9 x 99 x 109 x 119 x 129 x 139 x 149 x 159 x 169 x 179 x 189 x 199 x 20
10 x 1010 x 1110 x 1210 x 1310 x 1410 x 1510 x 1610 x 1710 x 1810 x 1910 x 20
$530553576599621644667
439462485507530553576599622644667690
485508530553576599622644667690713
$689719748778808837867
571600630660689719749778808838867897
630660689719749778808838868897927
2Part 6” S/F Body with 2Part Extended RetainerPart #1926 Part #1940
Included in Sign Cabinet Kit Pricing:! One vertical side will be 2Part Extended Frame with 2Part Retainer to allow the face to slide in and out.! Mill finish or Pre-Painted.! Four (4) pieces of cut to size and mitered 2Part 6" Single Face
Body, Part #1926.! Three (3) pieces of cut to size and mitered 2Part Extended
Retainer, Part #1940.! One (1) piece of cut to size and mitered 2Part Extended
Frame, Part #1955 and 2Part Retainer, Part #1944.! All screws required to assemble by mechanical fastening. Note: Raceway Cover Screws are not included.! All Body Corner Angles and/or Corner Keys required.! Packaging.
Not Included in Sign Cabinet Kit Pricing:! Face and Back. Mounting Provisions! Electrical Components.! Back Braces and Gussets.
Optional Accessories:! Ballast Pan(s). See page 6! Raceway Covers. See pages 6 & 7! Divider Bar. See pages 4, 9 & 29
Kit Sizes and Availability:! It is recommended to order kits 1-3/4" over nominal T-12
lamp size to utilize .040 flat Aluminum Raceway Covers.! Custom size kits may be cut to any dimension.
Recommended Lamp Spacing:! For flat plastic, illuminated backgrounds - 8” on center for
Part #1940 and 10” on center for Part #1939, using T-12 lamps.
! For pan formed faces use guideline for lamp spacing, see General Information on page 29.
! Always place lamps 3/4" from back of sign.
Cut To Size Divider:! See options page 29
General Information:! Finishes. See page 31! Additional information. See page 31! Cut to size and pre-cut kits are available locally through
select sign supply distributors.
F Optional Retainer:! Add $1.18 Mill Finish - $1.50 Pre-painted, per perimeter
foot per face for 2Part Large Extended Retainerpart #1939.
Optional Retainer*2Part Large Extended Retainer,Part #1939
One Side2Part Extended Frame, Part #1955and 2Part Retainer, Part #1944
Top, Bottom & One Side
7”
8-1/4”
S T A N D A R D K I T S
Unassembled 9” Single Face Kits
18
SizeHxW
SizeHxW
SizeHxW
SizeHxW
MillFinish
MillFinish
MillFinish
MillFinish
PrePaint
PrePaint
PrePaint
PrePaint
2 x 32 x 42 x 52 x 62 x 72 x 82 x 92 x 102 x 112 x 122 x 132 x 142 x 152 x 162 x 172 x 182 x 192 x 20
3 x 33 x 43 x 53 x 63 x 73 x 83 x 93 x 103 x 113 x 123 x 133 x 143 x 153 x 163 x 173 x 183 x 193 x 20
$161187213240266292318344370396423449475501527553580606
187214240266292318344370397423449475501527554580606632
$209243277311345379413447481515549583617651686720754788
244278312346380414448482516550584618652686720754788822
4 x 44 x 54 x 64 x 74 x 84 x 94 x 104 x 114 x 124 x 134 x 144 x 154 x 164 x 174 x 184 x 194 x 20
5 x 55 x 65 x 75 x 85 x 95 x 105 x 115 x 125 x 135 x 145 x 155 x 165 x 175 x 185 x 195 x 20
$240266292318345371397423449475501528554580606632658
292319345371397423449475502528554580606632659685
$312346380414448482516550584618652686720754788822856
380414448482516550584618652686720754788822856890
6 x 66 x 76 x 86 x 96 x 106 x 116 x 126 x 136 x 146 x 156 x 166 x 176 x 186 x 196 x 20
7 x 77 x 87 x 97 x 107 x 117 x 127 x 137 x 147 x 157 x 167 x 177 x 187 x 197 x 20
8 x 88 x 98 x 108 x 118 x 128 x 13
$345371397423450476502528554580606633659685711
397424450476502528554580607633659685711737
450476502528554581
$448482516550584618652686720754788822856890924
517551585619653687721755789823857891925959
585619653687721755
8 x 148 x 158 x 168 x 178 x 188 x 198 x 20
9 x 99 x 109 x 119 x 129 x 139 x 149 x 159 x 169 x 179 x 189 x 199 x 20
10 x 1010 x 1110 x 1210 x 1310 x 1410 x 1510 x 1610 x 1710 x 1810 x 1910 x 20
$607633659685711738764
502529555581607633659685712738764790
555581607633659686712738764790816
$789823857891925959993
653687721755789823857891925959993
1027
721755789823857891925959993
10271061
2Part 8” S/F Body with 2Part Extended RetainerPart #1927 Part #1940
Included in Sign Cabinet Kit Pricing:! One vertical side will be 2Part Extended Frame with 2Part Retainer to allow the face to slide in and out. ! Mill finish or Pre-Painted.! Four (4) pieces of cut to size and mitered 2Part 8" Single Face
Body, Part #1927.! Three (3) pieces of cut to size and mitered 2Part Extended
Retainer, Part #1940.! One (1) piece of cut to size and mitered 2Part Extended
Frame, Part #1955 and 2Part Retainer, Part #1944.! All screws required to assemble by mechanical fastening. Note: Raceway Cover Screws are not included.! All Body Corner Angles and/or Corner Keys required.! Packaging.
Not Included in Sign Cabinet Kit Pricing:! Face and Back. Mounting Provisions! Electrical Components.! Back Braces and Gussets.
Optional Accessories:! Ballast Pan(s). See page 6! Raceway Covers. See pages 6 & 7! Divider Bar. See pages 4, 9 & 29
Kit Sizes and Availability:! It is recommended to order kits 1-3/4" over nominal T-12
lamp size to utilize .040 flat Aluminum Raceway Covers.! Custom size kits may be cut to any dimension.
Recommended Lamp Spacing:! For flat plastic, illuminated backgrounds - 12" on center,
using T-12 lamps.! For pan formed faces use guideline for lamp spacing, see
General Information on page 31.! Always place lamps 3/4" from back of sign.
Cut To Size Divider:! See options page 29
General Information:! Finishes. See page 31! Additional information. See page 31! Cut to size and pre-cut kits are available locally through
select sign supply distributors.
F Optional Retainer:! Add $1.18 Mill Finish - $1.50 Pre-painted, per perimeter
foot per face for 2Part Large Extended Retainerpart #1939.
F Optional Retro (Retainer Only)! Deduct $6.78 Mill Finish - $8.82 Pre-painted, per
perimeter foot per face.
Top, Bottom & One Side
9”
Optional Retainer*2Part Large Extended Retainer,Part #1939
10-1/4”
One Side2Part Extended Frame, Part #1955and 2Part Retainer, Part #1944
S T A N D A R D K I T S
Unassembled 11” Double Face Kits
19
SizeHxW
SizeHxW
SizeHxW
SizeHxW
MillFinish
MillFinish
MillFinish
MillFinish
PrePaint
PrePaint
PrePaint
PrePaint
$209244278313347382416450485519554588622657691726760794
244279313347382416451485519554588623657691726760795829
$272317362407451496541585630675720764809854898943988
1033
318362407452496541586631675720765809854899944988
10331078
$313348382417451485520554589623657692726761795829864
383417451486520555589623658692727761795830864899
$407452497542586631676720765810855899944989
103410781123
497542587631676721766810855900945989
1034107911231168
$452486520555589624658692727761796830865899933
521555590624658693727762796830865899934968
590624659693728762
$587632677721766811856900945990
10341079112411691213
677722767811856901945990
103510801124116912141258
767812856901946991
8 x 148 x 158 x 168 x 178 x 188 x 198 x 20
9 x 99 x 109 x 119 x 129 x 139 x 149 x 159 x 169 x 179 x 189 x 199 x 20
10 x 1010 x 1110 x 1210 x 1310 x 1410 x 1510 x 1610 x 1710 x 1810 x 1910 x 20
$796831865900934968
1003
659694728762797831866900934969
10031038
728763797831866900935969
100310381072
$1035108011251169121412591304
857902946991
10361080112511701215125913041349
947991
103610811126117012151260130513491394
2 x 32 x 42 x 52 x 62 x 72 x 82 x 92 x 102 x 112 x 122 x 132 x 142 x 152 x 162 x 172 x 182 x 192 x 20
3 x 33 x 43 x 53 x 63 x 73 x 83 x 93 x 103 x 113 x 123 x 133 x 143 x 153 x 163 x 173 x 183 x 193 x 20
4 x 44 x 54 x 64 x 74 x 84 x 94 x 104 x 114 x 124 x 134 x 144 x 154 x 164 x 174 x 184 x 194 x 20
5 x 55 x 65 x 75 x 85 x 95 x 105 x 115 x 125 x 135 x 145 x 155 x 165 x 175 x 185 x 195 x 20
6 x 66 x 76 x 86 x 96 x 106 x 116 x 126 x 136 x 146 x 156 x 166 x 176 x 186 x 196 x 20
7 x 77 x 87 x 97 x 107 x 117 x 127 x 137 x 147 x 157 x 167 x 177 x 187 x 197 x 20
8 x 88 x 98 x 108 x 118 x 128 x 13
2Part 9” D/F Body with 2Part Extended RetainerPart #1928 Part #1940
Included in Sign Cabinet Kit Pricing:!
with 2Part Retainer to allow the face to slide in and out.! Mill finish or Pre-Painted.! Four (4) pieces of cut to size and mitered 2Part 9" Double
Face Body, Part #1928.! Six (6) pieces of cut to size and mitered 2Part Extended
Retainer, Part #1940.! Two (2) pieces of cut to size and mitered 2Part Extended
Frame, Part #1955 and 2Part Retainer Part, #1944.! All screws required to assemble by mechanical fastening. Note: Raceway Cover Screws are not included.! All Body Corner Angles and/or Corner Keys required.! Packaging.
Not Included in Sign Cabinet Kit Pricing:! Faces.! Electrical Components.! Internal Supports.
One vertical side per Face will be 2Part Extended FrameOptional Accessories:! Ballast Pan(s). See page 6! Raceway Covers. See pages 6 & 7! Divider Bar. See pages 4, 9 & 29
Kit Sizes and Availability:! It is recommended to order kits 1-3/4" over nominal T-12
lamp size to utilize .040 flat Aluminum Raceway Covers.! Custom size kits may be cut to any dimension.
Recommended Lamp Spacing:! For flat plastic, illuminated backgrounds - 8" on center for
Part #1940 and 10” on center for Part #1939, using T-12 lamps.
! For pan formed faces use guideline for lamp spacing, see General Information on page 31.
Top, Bottom & One Side
11”
13-5/8”
Cut To Size Divider:! See options page 29
General Information:! Finishes. See page 31! Additional information. See page 31! Cut to size and pre-cut kits are available locally through
select sign supply distributors.
F Optional Retainer:! Add $1.18 Mill Finish - $1.50 Pre-painted, per perimeter
foot per face for 2Part Large Extended Retainer part #1939.
Optional Retainer*2Part Large Extended Retainer,Part #1939
One Side2Part Extended Frame, Part #1955
and 2Part Retainer, Part #1944
S T A N D A R D K I T S
`
20
SizeHxW
SizeHxW
SizeHxW
SizeHxW
MillFinish
MillFinish
MillFinish
MillFinish
PrePaint
PrePaint
PrePaint
PrePaint
$237275314353392431469508547586625663702741780819857896
276315353392431470509547586625664703741780819858897935
$308358408459509560610661711762812862913963
1014106411151165
358409459510560611661712762812863913964
10141065111511661216
$354392431470509548586625664703742781819858897936975
432470509548587626664703742781820858897936975
1014
$460510561611662712762813863914964
101510651116116612161267
561612662712763813864914965
1015106611161166121712671318
$510548587626665704742781820859898936975
10141053
588626665704743782820859898937976
101410531092
665704743782821859
$662713763814864915965
10161066111611671217126813181369
764814865915966
101610661117116712181268131913691420
865916966
101610671117
8 x 148 x 158 x 168 x 178 x 188 x 198 x 20
9 x 99 x 109 x 119 x 129 x 139 x 149 x 159 x 169 x 179 x 189 x 199 x 20
10 x 1010 x 1110 x 1210 x 1310 x 1410 x 1510 x 1610 x 1710 x 1810 x 1910 x 20
$898937976
1015105310921131
743782821860899937976
10151054109311311170
821860899938977
101510541093113211711209
$1168121812691319137014201470
96610171067111811681219126913201370142014711521
10681118116912191270132013701421147115221572
2Part 12” D/F Body with 2Part Extended RetainerPart #1929 Part #1940
2 x 32 x 42 x 52 x 62 x 72 x 82 x 92 x 102 x 112 x 122 x 132 x 142 x 152 x 162 x 172 x 182 x 192 x 20
3 x 33 x 43 x 53 x 63 x 73 x 83 x 93 x 103 x 113 x 123 x 133 x 143 x 153 x 163 x 173 x 183 x 193 x 20
4 x 44 x 54 x 64 x 74 x 84 x 94 x 104 x 114 x 124 x 134 x 144 x 154 x 164 x 174 x 184 x 194 x 20
5 x 55 x 65 x 75 x 85 x 95 x 105 x 115 x 125 x 135 x 145 x 155 x 165 x 175 x 185 x 195 x 20
6 x 66 x 76 x 86 x 96 x 106 x 116 x 126 x 136 x 146 x 156 x 166 x 176 x 186 x 196 x 20
7 x 77 x 87 x 97 x 107 x 117 x 127 x 137 x 147 x 157 x 167 x 177 x 187 x 197 x 20
8 x 88 x 98 x 108 x 118 x 128 x 13
Included in Sign Cabinet Kit Pricing:! One with 2Part Retainer to allow the face to slide in and out.! Mill finish or Pre-Painted.! Four (4) pieces of cut to size and mitered 2Part 12" Double
Face Body, Part #1929.! Six (6) pieces of cut to size and mitered 2Part Extended
Retainer, Part #1940.! Two (2) pieces of cut to size and mitered 2Part Extended
Frame, Part #1955 and 2Part Retainer, Part #1944! All screws required to assemble by mechanical fastening. Note: Raceway Cover Screws are not included.! All Body Corner Angles and/or Corner Keys required.! Packaging.
Not Included in Sign Cabinet Kit Pricing:! Faces.! Electrical Components.! Internal Supports.
vertical side per face will be 2Part Extended FrameOptional Accessories:! Ballast Pan(s). See page 6! Raceway Covers. See pages 6 & 7! Divider Bar. See pages 4, 9 & 29
Kit Sizes and Availability:! It is recommended to order kits 1-3/4" over nominal T-12
lamp size to utilize .040 flat Aluminum Raceway Covers.! Custom size kits may be cut to any dimension.
Recommended Lamp Spacing:! For flat plastic, illuminated backgrounds - 12" on center,
using T-12 lamps.! For pan formed faces use guideline for lamp spacing, see
General Information on page 31.
Top, Bottom & Both Sides
14”
Unassembled 14” Double Face Kits16-5/8”
Cut To Size Divider:! See options page 29
General Information:! Finishes. See page 31! Additional information. See page 31! Cut to size and pre-cut kits are available locally through
select sign supply distributors.
F Optional Retainer:! Add $1.18 Mill Finish - $1.50 Pre-painted, per perimeter
foot per face for 2Part Large Extended Retainer part #1939.
Optional Retainer*2Part Large Extended Retainer,Part #1939
One Side2Part Extended Frame, Part #1955
and 2Part Retainer, Part #1944
S T A N D A R D K I T S
Unassembled 7” Single Face Vandal System Kits
21
SizeHxW
SizeHxW
SizeHxW
SizeHxW
MillFinish
MillFinish
MillFinish
MillFinish
PrePaint
PrePaint
PrePaint
PrePaint
$182211239267295323351379408436464492520548576605633661
209237265293322350378406434462490519547575603631659687
$237274310347383420457493530566603640676713749786823859
272308345381418455491528564601637674711747784820857894
4 x 44 x 54 x 64 x 74 x 84 x 94 x 104 x 114 x 124 x 134 x 144 x 154 x 164 x 174 x 184 x 194 x 20
5 x 55 x 65 x 75 x 85 x 95 x 105 x 115 x 125 x 135 x 145 x 155 x 165 x 175 x 185 x 195 x 20
$264292320348376404432461489517545573601629658686714
318346375403431459487515543572600628656684712740
$343379416452489526562599635672709745782818855891928
414450487523560597633670706746780816853889926963
$373401429457485514542570598626654682711739767
428456484512540568596625653681709737765793
482510538567595623
$485521558595631668704741777814851887924960997
556592629666702739775812849885922958995
1031
627663700737773810
8 x 148 x 158 x 168 x 178 x 188 x 198 x 20
9 x 99 x 109 x 119 x 129 x 139 x 149 x 159 x 169 x 179 x 189 x 199 x 20
10 x 1010 x 1110 x 1210 x 1310 x 1410 x 1510 x 1610 x 1710 x 1810 x 1910 x 20
$651679707735764792820
537565593621649678706734762790818846
591620648676704732760789817845873
$846883920956993
10291066
698734771808844881917954991
102710641100
769806842879915952988
1025106210981135
2Part 6” S/F Body with 2Part Inner Frame and 2Part Outer FramePart #1926 Part #1960 Part #1942
2 x 32 x 42 x 52 x 62 x 72 x 82 x 92 x 102 x 112 x 122 x 132 x 142 x 152 x 162 x 172 x 182 x 192 x 20
3 x 33 x 43 x 53 x 63 x 73 x 83 x 93 x 103 x 113 x 123 x 133 x 143 x 153 x 163 x 173 x 183 x 193 x 20
6 x 66 x 76 x 86 x 96 x 106 x 116 x 126 x 136 x 146 x 156 x 166 x 176 x 186 x 196 x 20
7 x 77 x 87 x 97 x 107 x 117 x 127 x 137 x 147 x 157 x 167 x 177 x 187 x 197 x 20
8 x 88 x 98 x 108 x 118 x 128 x 13
Included in Sign Cabinet Kit Pricing:! Mill finish or Pre-Painted.! Four (4) pieces of cut to size and mitered 2Part 6” Single Face
Body, Part #1926.! Four (4) pieces of cut to size and mitered 2Part Inner
Frame, Part #1960.! Four (4) pieces of cut to size and mitered 2Part Outer
Frame, Part #1942.! All screws required to assemble by mechanical fastening. Note: Raceway Cover Screws and hinge fasteners are not included.! All Body Corner Angles and/or Corner Keys required.! Packaging.! Cut to size 2Part Hinge, Part #5996.! Two (2) 2Part Locks, Part #5994.! One (1) 2Part Lock Wrench, Part #5992.
Not Included in Sign Cabinet Kit Pricing:! Faces and Back.! Electrical Components.
Not Included (Cont.)! Back Braces and Gussets.! Mounting Provisions.! Attachment of Hinge.!Drilling of holes for locks and attachment of locks.
Optional Accessories:! Ballast Pan(s). See page 6! Raceway Covers. See pages 6 & 7! Divider Bar. See pages 4, 9 & 29
Kit Sizes and Availability:! It is recommended to order kits 1-3/4" over nominal T-12
lamp size to utilize .040 flat Aluminum Raceway Covers.! Custom size kits may be cut to any dimension.
Recommended Lamp Spacing:! For flat plastic, illuminated backgrounds - 6” on center, using
T-12 lamps.
! For pan formed faces use guideline for lamp spacing, see General Information on page 31.! Always place lamps 3/4" from back of sign.
Cut To Size Dividers:! See options page 29
General Information:! Finishes. See page 31! Additional information. See page 31! Cut to size and pre-cut kits are available locally through
select sign supply distributors.! The Inner Frame retains the inner face. See page 10! The Outer Frame retains the vandal cover. See page 10
NOTE: It is recommended to use safety chains and prop-bars on hingeable faces.
Top, Bottom & Both Sides
7”
S T A N D A R D K I T S
Unassembled 9” Single Face Vandal System Kits
22
SizeHxW
SizeHxW
SizeHxW
SizeHxW
MillFinish
MillFinish
MillFinish
MillFinish
PrePaint
PrePaint
PrePaint
PrePaint
$203234266297329360392423455486518549581612644675707738
232264295327358390422453485516548579611642674705737768
$263304345386427468509550591632673714755796837878919960
302343384425466507548589630671712753794835876917958999
4 x 44 x 54 x 64 x 74 x 84 x 94 x 104 x 114 x 124 x 134 x 144 x 154 x 164 x 174 x 184 x 194 x 20
5 x 55 x 65 x 75 x 85 x 95 x 105 x 115 x 125 x 135 x 145 x 155 x 165 x 175 x 185 x 195 x 20
$294325357388420451483514546577609640672704735767798
355387418450481513544576607639670702733765796828
$382423464505546587628669710751792833874915956997
1037
462503544585626667708749790831871912953994
10351076
$417448480511543574606637669700732763795826858
478510541573604636667699730762793825856888
539571602634665697
$542583624664705746787828869910951992
103310741115
621662703744785826867908949990
1031107211131154
701742783824865906
8 x 148 x 158 x 168 x 178 x 188 x 198 x 20
9 x 99 x 109 x 119 x 129 x 139 x 149 x 159 x 169 x 179 x 189 x 199 x 20
10 x 1010 x 1110 x 1210 x 1310 x 1410 x 1510 x 1610 x 1710 x 1810 x 1910 x 20
$728760792823855886918
601632664695727758790821853884916947
662694725757788820851883914946977
$947988
10291070111111521193
781822863904945986
102710681109115011911232
861902943984
1025106611071148118912301271
Top, Bottom & Both Sides
9”
2Part 8” S/F Body with 2Part Inner Frame and 2Part Outer FramePart #1927 Part #1960 Part #1942
2 x 32 x 42 x 52 x 62 x 72 x 82 x 92 x 102 x 112 x 122 x 132 x 142 x 152 x 162 x 172 x 182 x 192 x 20
3 x 33 x 43 x 53 x 63 x 73 x 83 x 93 x 103 x 113 x 123 x 133 x 143 x 153 x 163 x 173 x 183 x 193 x 20
6 x 66 x 76 x 86 x 96 x 106 x 116 x 126 x 136 x 146 x 156 x 166 x 176 x 186 x 196 x 20
7 x 77 x 87 x 97 x 107 x 117 x 127 x 137 x 147 x 157 x 167 x 177 x 187 x 197 x 20
8 x 88 x 98 x 108 x 118 x 128 x 13
Included in Sign Cabinet Kit Pricing:! Mill finish or Pre-Painted.! Four (4) pieces of cut to size and mitered 2Part 8" Single Face
Body, Part #1927.! Four (4) pieces of cut to size and mitered 2Part Inner
Frame, Part #1960.! Four (4) pieces of cut to size and mitered 2Part Outer
Frame, Part #1942.! All screws required to assemble by mechanical fastening. Note: Raceway Cover Screws and hinge fasteners are not included.! All Body Corner Angles and/or Corner Keys required.! Packaging.! Cut to size 2Part Hinge, Part #5996.! Two (2) 2Part Locks, Part #5994.! One (1) 2Part Lock Wrench, Part #5992.
Not Included in Sign Cabinet Kit Pricing:! Faces and Back.! Electrical Components.
Not Included (Cont.)! Back Braces and Gussets.! Mounting Provisions.! Attachment of Hinge.! Drilling of holes for locks and attachment of locks.
Optional Accessories:! Ballast Pan(s). See page 6! Raceway Covers. See pages 6 & 7! Divider Bar. See pages 4, 9 & 29
Kit Sizes and Availability:! It is recommended to order kits 1-3/4" over nominal T-12
lamp size to utilize .040 flat Aluminum Raceway Covers.! Custom size kits may be cut to any dimension.
Recommended Lamp Spacing:! For flat plastic, illuminated backgrounds - 10" on center,
using T-12 lamps.
! For pan formed faces use guideline for lamp spacing, see General Information on page 31.! Always place lamps 3/4" from back of sign.
Cut To Size Dividers:! See options page 29
General Information:! Finishes. See page 31! Additional information. See page 31! Cut to size and pre-cut kits are available locally through
select sign supply distributors.! The Inner Frame retains the inner face. See page 10! The Outer Frame retains the vandal cover. See page 10
F Optional Retro (Vandal System Only)& Deduct $6.78 Mill Finish - $8.82 for Pre-painted, per
perimeter foot per face.
NOTE: It is recommended to use safety chains and prop-bars on hingeable faces.
S T A N D A R D K I T S
Unassembled 11” Double Face Vandal System Kits
23
SizeHxW
SizeHxW
SizeHxW
SizeHxW
MillFinish
MillFinish
MillFinish
MillFinish
PrePaint
PrePaint
PrePaint
PrePaint
$293338383428473518563608654699744789834879924969
10141060
335380425470515560605650695741786831876921966
101110561101
$381439498556615674732791850908967
1026108411431201126013191377
435494552611669728787845904963
10211080113911971256131513731432
$421467512557602647692737782827873918963
1008105310981143
508554599644689734779824869914960
10051050109511401185
$548607665724782841900958
101710761134119312521310136914281486
661720778837896954
1013107111301189124713061365142314821541
$595640686731776821866911956
100110461092113711821227
682727773818863908953998
104310881133117812241269
769814859905950995
$774833891950
10091067112611841243130213601419147815361595
887946
100410631122118012391297135614151473153215911649
100010591117117612351293
8 x 148 x 158 x 168 x 178 x 188 x 198 x 20
9 x 99 x 109 x 119 x 129 x 139 x 149 x 159 x 169 x 179 x 189 x 199 x 20
10 x 1010 x 1110 x 1210 x 1310 x 1410 x 1510 x 1610 x 1710 x 1810 x 1910 x 20
$1040108511301175122012651311
856901946992
10371082112711721217126213071352
943988
103310781124116912141259130413491394
$1352141114691528158616451704
111311721230128913481406146515241582164116991758
12261285134314021461151915781637169517541812
Top, Bottom & Both Sides
11”
4 x 44 x 54 x 64 x 74 x 84 x 94 x 104 x 114 x 124 x 134 x 144 x 154 x 164 x 174 x 184 x 194 x 20
5 x 55 x 65 x 75 x 85 x 95 x 105 x 115 x 125 x 135 x 145 x 155 x 165 x 175 x 185 x 195 x 20
2 x 32 x 42 x 52 x 62 x 72 x 82 x 92 x 102 x 112 x 122 x 132 x 142 x 152 x 162 x 172 x 182 x 192 x 20
3 x 33 x 43 x 53 x 63 x 73 x 83 x 93 x 103 x 113 x 123 x 133 x 143 x 153 x 163 x 173 x 183 x 193 x 20
6 x 66 x 76 x 86 x 96 x 106 x 116 x 126 x 136 x 146 x 156 x 166 x 176 x 186 x 196 x 20
7 x 77 x 87 x 97 x 107 x 117 x 127 x 137 x 147 x 157 x 167 x 177 x 187 x 197 x 20
8 x 88 x 98 x 108 x 118 x 128 x 13
2Part 9” D/F Body with 2Part Inner Frame and 2Part Outer FramePart #1928 Part #1960 Part #1942
Included in Sign Cabinet Kit Pricing:! Mill finish or Pre-Painted.! Four (4) pieces of cut to size and mitered 2Part 9" Double
Face Body, Part #1928.! Eight (8) pieces of cut to size and mitered 2Part Inner
Frame, Part #1960.! Eight (8) pieces of cut to size and mitered 2Part Outer
Frame, Part #1942.! All screws required to assemble by mechanical fastening. Note: Raceway Cover Screws and hinge fasteners are not included.! All Body Corner Angles and/or Corner Keys required.! Packaging.! Cut to size 2Part Hinge, Part #5996.! Four (4) 2Part Locks, Part #5994.! One (1) 2Part Lock Wrench, Part #5992
Not Included in Sign Cabinet Kit Pricing:! Faces.! Electrical Components.
Not Included (Cont.)! Internal Supports.! Attachment of Hinge.! Drilling of holes for locks and attachment of locks.
Optional Accessories:! Ballast Pan(s). See page 6! Raceway Covers. See pages 6 & 7! Divider Bar. See pages 4, 9 & 29
Kit Sizes and Availability:! It is recommended to order kits 1-3/4" over nominal T-12
lamp size to utilize .040 flat Aluminum Raceway Covers.! Custom size kits may be cut to any dimension.
Recommended Lamp Spacing:! For flat plastic, illuminated backgrounds - 7" on center,
using T-12 lamps.! For pan formed faces use guideline for lamp spacing, see
General Information on page 31.
Cut To Size Dividers:! See options page 29
General Information:! Finishes. See page 31! Additional information. See page 31! Cut to size and pre-cut kits are available locally through select sign supply distributors.! The Inner Frame retains the inner face. See page 10! The Outer Frame retains the vandal cover. See page 10
NOTE: It is recommended to use safety chains and prop-bars on hingeable faces.
S T A N D A R D K I T S
Unassembled 14” Double Face Vandal System Kits
24
SizeHxW
SizeHxW
SizeHxW
SizeHxW
MillFinish
MillFinish
MillFinish
MillFinish
PrePaint
PrePaint
PrePaint
PrePaint
$320369419468518567617666716765815864914963
1013106211121161
366415465514564613663712762811861910960
10091059110811581207
$416480544609673737802866930995
10591123118812521317138114451510
476540604669733797862926990
105511191184124813121377144115051570
$462511561610660709759808858907957
100610561105115512041254
557607656706755805854904953
1003105211021151120112501300
$600664729793858922986
1051111511791244130813721437150115651630
725789853918982
10461111117512391304136814321497156116261690
$653703752802851901950
10001049109911481198124712971346
749798848897947996
10461095114511941244129313431392
845894944993
10431092
$849913978
104211061171123513001364142814931557162116861750
9731038110211671231129513601424148815531617168117461810
109811621227129113551420
8 x 148 x 158 x 168 x 178 x 188 x 198 x 20
9 x 99 x 109 x 119 x 129 x 139 x 149 x 159 x 169 x 179 x 189 x 199 x 20
10 x 1010 x 1110 x 1210 x 1310 x 1410 x 1510 x 1610 x 1710 x 1810 x 1910 x 20
$1142119112411290134013891439
940990
1039108911381188123712871336138614351485
10361086113511851234128413331383143214821531
$1484154816131677174218061870
122212871351141514801544160916731737180218661930
13471411147615401604166917331797186219261990
14”
4 x 44 x 54 x 64 x 74 x 84 x 94 x 104 x 114 x 124 x 134 x 144 x 154 x 164 x 174 x 184 x 194 x 20
5 x 55 x 65 x 75 x 85 x 95 x 105 x 115 x 125 x 135 x 145 x 155 x 165 x 175 x 185 x 195 x 20
2 x 32 x 42 x 52 x 62 x 72 x 82 x 92 x 102 x 112 x 122 x 132 x 142 x 152 x 162 x 172 x 182 x 192 x 20
3 x 33 x 43 x 53 x 63 x 73 x 83 x 93 x 103 x 113 x 123 x 133 x 143 x 153 x 163 x 173 x 183 x 193 x 20
6 x 66 x 76 x 86 x 96 x 106 x 116 x 126 x 136 x 146 x 156 x 166 x 176 x 186 x 196 x 20
7 x 77 x 87 x 97 x 107 x 117 x 127 x 137 x 147 x 157 x 167 x 177 x 187 x 197 x 20
8 x 88 x 98 x 108 x 118 x 128 x 13
2Part 12” D/F Body with 2Part Inner Frame and 2Part Outer FramePart #1929 Part #1960 Part #1942
Included in Sign Cabinet Kit Pricing:! Mill finish or Pre-Painted.! Four (4) pieces of cut to size and mitered 2Part 12" Double
Face Body, Part #1929.! Eight (8) pieces of cut to size and mitered 2Part Inner
Frame, Part #1960.! Eight (8) pieces of cut to size and mitered 2Part Outer
Frame, Part #1942.! All screws required to assemble by mechanical fastening. Note: Raceway Cover Screws and hinge fasteners are not included.! All Body Corner Angles and/or Corner Keys required.! Packaging.! Cut to size 2Part Hinge, Part #5996.! Four (4) 2Part Locks, Part #5994.! One (1) 2Part Lock Wrench, Part #5994.
Not Included in Sign Cabinet Kit Pricing:! Faces.! Electrical Components.
Not Included (Cont.)! Internal Supports.! Attachment of Hinge.! Drilling of holes for locks and attachment of locks.
Optional Accessories:! Ballast Pan(s). See page 6! Raceway Covers. See pages 6 & 7! Divider Bar. See pages 4, 9 & 29
Kit Sizes and Availability:! It is recommended to order kits 1-3/4" over nominal T-12
lamp size to utilize .040 flat Aluminum Raceway Covers.! Custom size kits may be cut to any dimension.
Recommended Lamp Spacing:! For flat plastic, illuminated backgrounds - 9" on center,
using T-12 lamps.! For pan formed faces use guideline for lamp spacing, see
General Information on page 31.
Cut To Size Dividers:! See options page 29
General Information:! Finishes. See page 31! Additional information. See page 31! Cut to size and pre-cut kits are available locally through
select sign supply distributors.! The Inner Frame retains the inner face. See page 10! The Outer Frame retains the vandal cover. See page 10
NOTE: It is recommended to use safety chains and prop-bars on hingeable faces.
Top, Bottom & Both Sides
S T A N D A R D K I T S
Unassembled 8-1/4” Single Face Vandal System Kits
25
SizeHxW
SizeHxW
SizeHxW
SizeHxW
MillFinish
MillFinish
MillFinish
MillFinish
PrePaint
PrePaint
PrePaint
PrePaint
$256297339381422464506547589631673714756798839881923964
295336378420461503545587628670712753795837878920962
1003
$332386441495549603657712766820874928983
10371091114511991254
383437492546600654708763817871925979
103410881142119612501305
$376417459501542584626667709751792834876918959
10011043
456498540581623665707748790832873915957998
10401082
$488542597651705759813868922976
1030108411391193124713011355
593647702756810864918973
10271081113511891244129813521406
$537579621662704746787829871912954996
103710791121
618660701743785826868910952993
1035107711181160
699740782824866907
$698753807861915969
102410781132118612401295134914031457
803858912966
1020107411291183123712911345140014541508
908963
1017107111251179
8 x 148 x 158 x 168 x 178 x 188 x 198 x 20
9 x 99 x 109 x 119 x 129 x 139 x 149 x 159 x 169 x 179 x 189 x 199 x 20
10 x 1010 x 1110 x 1210 x 1310 x 1410 x 1510 x 1610 x 1710 x 1810 x 1910 x 20
$949991
10321074111611571199
780821863905946988
103010711113115511971238
860902944985
1027106911111152119412361277
$1234128813421396145015051559
101310681122117612301284133913931447150115551610
11191173122712811335139014441498155216061661
4 x 44 x 54 x 64 x 74 x 84 x 94 x 104 x 114 x 124 x 134 x 144 x 154 x 164 x 174 x 184 x 194 x 20
5 x 55 x 65 x 75 x 85 x 95 x 105 x 115 x 125 x 135 x 145 x 155 x 165 x 175 x 185 x 195 x 20
2 x 32 x 42 x 52 x 62 x 72 x 82 x 92 x 102 x 112 x 122 x 132 x 142 x 152 x 162 x 172 x 182 x 192 x 20
3 x 33 x 43 x 53 x 63 x 73 x 83 x 93 x 103 x 113 x 123 x 133 x 143 x 153 x 163 x 173 x 183 x 193 x 20
6 x 66 x 76 x 86 x 96 x 106 x 116 x 126 x 136 x 146 x 156 x 166 x 176 x 186 x 196 x 20
7 x 77 x 87 x 97 x 107 x 117 x 127 x 137 x 147 x 157 x 167 x 177 x 187 x 197 x 20
8 x 88 x 98 x 108 x 118 x 128 x 13
2Part 6” S/F Body with 2Part Large Inner Frame and 2Part Large Outer FramePart #1926 Part #1959 Part #1941
Included in Sign Cabinet Kit Pricing:! Mill finish or Pre-Painted.! Four (4) pieces of cut to size and mitered 2Part 6" Single Face
Body, Part #1926.! Four (4) pieces of cut to size and mitered 2Part Large Inner
Frame, Part #1959.! Four (4) pieces of cut to size and mitered 2Part Large Outer
Frame, Part #1941.! All screws required to assemble by mechanical fastening. Note: Raceway Cover Screws are not included.! All Body Corner Angles and/or Corner Keys required.! Packaging.! Cut to size 2Part Large Hinge, Part #5997.! Two (2) 2Part Large Locks, Part #5993.
Not Included in Sign Cabinet Kit Pricing:! Faces and Back.! Electrical Components.! Back Braces and Gussets.
Not Included (Cont.)!
! Attachment of Hinge.! Drilling of holes for locks and attachment of locks.! Gas supports and mounting hardware.
Optional Accessories:! Ballast Pan(s). See page 6! Raceway Covers. See pages 6 & 7! Divider Bar. See pages 4, 9 & 29! Gas Supports and Mounting Hardware. See page 29
Kit Sizes and Availability:! It is recommended to order kits 1-3/4" over nominal T-12
lamp size to utilize .040 flat Aluminum Raceway Covers.! Custom size kits may be cut to any dimension.
Cut To Size Dividers:! See options page 29
Mounting Provisions.Recommended Lamp Spacing:! For flat plastic, illuminated backgrounds - 6" on center,
using T-12 lamps.! For pan formed faces use guideline for lamp spacing, see
General Information on page 31.! Always place lamps 3/4" from back of sign.
General Information:! Finishes. See page 31! Additional information. See page 31! Cut to size and pre-cut kits are available locally through
select sign supply distributors.! The Inner Frame retains the inner face. See page 10! The Outer Frame retains the vandal cover. See page 10
NOTE: It is recommended to use safety chains and prop-bars on hingeable faces.
8-1/4”
Top, Bottom & Both Sides
S T A N D A R D K I T S
Unassembled 10-1/4” Single Face Vandal System Kits
26
SizeHxW
SizeHxW
SizeHxW
SizeHxW
MillFinish
MillFinish
MillFinish
MillFinish
PrePaint
PrePaint
PrePaint
PrePaint
$276321366411456501546591636681726771816861906951996
1041
318363408453498543588633678723768814859904949994
10391084
$358417475534592651710768827885944
1002106111191178123712951354
413472531589648706765823882940999
1058111611751233129213501409
$406451496541586631676721766811856901946991
103610811126
493538583628673718763808853898944989
1034107911241169
$527586644703761820879937996
10541113117112301288134714061464
641700758817875934992
105111091168122712851344140214611519
$581626671716761806851896941986
10311076112111661211
668713758803848893938983
102810731119116412091254
756801846891936981
$755813872930989
1048110611651223128213401399145715161575
869927986
10441103116112201278133713961454151315711630
98210411099115812171275
8 x 148 x 158 x 168 x 178 x 188 x 198 x 20
9 x 99 x 109 x 119 x 129 x 139 x 149 x 159 x 169 x 179 x 189 x 199 x 20
10 x 1010 x 1110 x 1210 x 1310 x 1410 x 1510 x 1610 x 1710 x 1810 x 1910 x 20
$1026107111161161120612511296
843888933978
10231068111311581203124912941339
931976
102110661111115612011246129113361381
$1334139214511509156816261685
109611551213127213301389144715061565162316821740
12101268132713861444150315611620167817371795
4 x 44 x 54 x 64 x 74 x 84 x 94 x 104 x 114 x 124 x 134 x 144 x 154 x 164 x 174 x 184 x 194 x 20
5 x 55 x 65 x 75 x 85 x 95 x 105 x 115 x 125 x 135 x 145 x 155 x 165 x 175 x 185 x 195 x 20
2 x 32 x 42 x 52 x 62 x 72 x 82 x 92 x 102 x 112 x 122 x 132 x 142 x 152 x 162 x 172 x 182 x 192 x 20
3 x 33 x 43 x 53 x 63 x 73 x 83 x 93 x 103 x 113 x 123 x 133 x 143 x 153 x 163 x 173 x 183 x 193 x 20
6 x 66 x 76 x 86 x 96 x 106 x 116 x 126 x 136 x 146 x 156 x 166 x 176 x 186 x 196 x 20
7 x 77 x 87 x 97 x 107 x 117 x 127 x 137 x 147 x 157 x 167 x 177 x 187 x 197 x 20
8 x 88 x 98 x 108 x 118 x 128 x 13
2Part 8” S/F Body with 2Part Large Inner Frame and 2Part Large Outer FramePart #1927 Part #1959 Part #1941
Included in Sign Cabinet Kit Pricing:! Mill finish or Pre-Painted.! Four (4) pieces of cut to size and mitered 2Part 8" Single Face
Body, Part #1927.! Four (4) pieces of cut to size and mitered 2Part Large Inner
Frame, Part #1959.! Four (4) pieces of cut to size and mitered 2Part Large Outer
Frame, Part #1941.! All screws required to assemble by mechanical fastening. Note: Raceway Cover Screws are not included.! All Body Corner Angles and/or Corner Keys required.! Packaging.! Cut to size 2Part Large Hinge, Part #5997.! Two (2) 2Part Large Locks, Part #5993.
Not Included in Sign Cabinet Kit Pricing:! Faces and Back.! Electrical Components.! Back Braces and Gussets.
Not Included (Cont.)! Mounting Provisions.! Attachment of Hinge.! Drilling of holes for locks and attachment of locks.! Gas supports and mounting hardware.
Optional Accessories:! Ballast Pan(s). See page 6! Raceway Covers. See pages 6 & 7! Divider Bar. See pages 4, 9 & 29! Gas Supports and Mounting Hardware. See page 29
Kit Sizes and Availability:! It is recommended to order kits 1-3/4" over nominal T-12
lamp size to utilize .040 flat Aluminum Raceway Covers.! Custom size kits may be cut to any dimension.
Cut To Size Dividers:! See options page 29
Recommended Lamp Spacing:! For flat plastic, illuminated backgrounds - 10" on center,
using T-12 lamps.! For pan formed faces use guideline for lamp spacing, see
General Information on page 31.! Always place lamps 3/4" from back of sign.
General Information:! Finishes. See page 31! Additional information. See page 31! Cut to size and pre-cut kits are available locally through
select sign supply distributors.! The Inner Frame retains the inner face. See page 10! The Outer Frame retains the vandal cover. See page 10
F Retro Option (Vandal System Only)! Deduct $6.78 Mill Finish - $8.82 Pre-painted, per
perimeter foot per face.
10-1/4”
NOTE: It is recommended to use safety chains and prop-bars on hingeable faces.
Top, Bottom & Both Sides
S T A N D A R D K I T S
Unassembled 13-5/8” Double Face Vandal System Kits
27
SizeHxW
SizeHxW
SizeHxW
SizeHxW
MillFinish
MillFinish
MillFinish
MillFinish
PrePaint
PrePaint
PrePaint
PrePaint
$439511583655727799872944
1016108811601232130513771449152115931665
506578650722794866939
10111083115512271299137214441516158816601732
$570664758852945
1039113312271321141415081602169617901884197720712165
657751845939
10331126122013141408150215951689178318771971206421582252
$645717789861933
100610781150122212941366143915111583165517271799
784856928
1000107311451217128913611433150615781650172217941866
$838932
102611201214130714011495158916831776187019642058215222452339
1019111312071301139414881582167617701863195720512145223923322426
$923995
1068114012121284135614281500157316451717178918611933
10621135120712791351142314951567164017121784185619282000
120212741346141814901562
$120012941388148215751669176318571951204421382232232624202513
13811475156916621756185019442038213222252319241325072601
156216561750184319372031
8 x 148 x 158 x 168 x 178 x 188 x 198 x 20
9 x 99 x 109 x 119 x 129 x 139 x 149 x 159 x 169 x 179 x 189 x 199 x 20
10 x 1010 x 1110 x 1210 x 1310 x 1410 x 1510 x 1610 x 1710 x 1810 x 1910 x 20
$1634170717791851192319952067
134114131485155716291701177418461918199020622134
14801552162416961769184119131985205721292201
$2125221923122406250025942688
174318371931202421182212230624002493258726812775
19242018211122052299239324872580267427682862
4 x 44 x 54 x 64 x 74 x 84 x 94 x 104 x 114 x 124 x 134 x 144 x 154 x 164 x 174 x 184 x 194 x 20
5 x 55 x 65 x 75 x 85 x 95 x 105 x 115 x 125 x 135 x 145 x 155 x 165 x 175 x 185 x 195 x 20
2 x 32 x 42 x 52 x 62 x 72 x 82 x 92 x 102 x 112 x 122 x 132 x 142 x 152 x 162 x 172 x 182 x 192 x 20
3 x 33 x 43 x 53 x 63 x 73 x 83 x 93 x 103 x 113 x 123 x 133 x 143 x 153 x 163 x 173 x 183 x 193 x 20
6 x 66 x 76 x 86 x 96 x 106 x 116 x 126 x 136 x 146 x 156 x 166 x 176 x 186 x 196 x 20
7 x 77 x 87 x 97 x 107 x 117 x 127 x 137 x 147 x 157 x 167 x 177 x 187 x 197 x 20
8 x 88 x 98 x 108 x 118 x 128 x 13
2Part 9” D/F Body with 2Part Large Inner Frame and 2Part Large Outer FramePart #1928 Part #1959 Part #1941
Included in Sign Cabinet Kit Pricing:! Mill finish or Pre-Painted.! Four (4) pieces of cut to size and mitered 2Part 9" Double
Face Body, Part #1928.! Eight (8) pieces of cut to size and mitered 2Part Large Inner
Frame, Part #1959.! Eight (8) pieces of cut to size and mitered 2Part Large Outer
Frame, Part #1941.! All screws required to assemble by mechanical fastening. Note: Raceway Cover Screws are not included.! All Body Corner Angles and/or Corner Keys required.! Packaging.! Cut to size 2Part Large Hinge, Part #5997.! Four (4) 2Part Large Locks, Part #5993.
Not Included in Sign Cabinet Kit Pricing:! Faces.! Electrical Components.! Internal Supports.
Not Included (Cont.)! Attachment of Hinge.! Drilling of holes for locks and attachment of locks.! Gas supports and mounting hardware.
Optional Accessories:! Ballast Pan(s). See page 6! Raceway Covers. See pages 6 & 7! Divider Bar. See pages 4, 9 & 29! Gas Supports and Mounting Hardware. See page 29
Kit Sizes and Availability:! It is recommended to order kits 1-3/4" over nominal T-12
lamp size to utilize .040 flat Aluminum Raceway Covers.! Custom size kits may be cut to any dimension.
Recommended Lamp Spacing:! For flat plastic, illuminated backgrounds - 7" on center,
using T-12 lamps.! For pan formed faces use guideline for lamp spacing, see
General Information on page 31.
Cut To Size Dividers:! See options page 29
General Information:! Finishes. See page 31! Additional information. See page 31! Cut to size and pre-cut kits are available locally through
select sign supply distributors.! The Inner Frame retains the inner face. See page 10! The Outer Frame retains the vandal cover. See page 10
13-5/8”
NOTE: It is recommended to use safety chains and prop-bars on hingeable faces.
Top, Bottom & Both Sides
S T A N D A R D K I T S
Unassembled 16-5/8” Double Face Vandal System Kits
28
SizeHxW
SizeHxW
SizeHxW
SizeHxW
MillFinish
MillFinish
MillFinish
MillFinish
PrePaint
PrePaint
PrePaint
PrePaint
$466542619695772849925
10021078115512311308138414611538161416911767
537614690767843920997
10731150122613031379145615321609168617621839
$605705805904
10041103120313021402150116011700180018991999209821982297
698798897997
10961196129513951495159416941793189319922092219122912390
$685762838915991
106811441221129813741451152716041680175718341910
833910986
1063113912161292136914461522159916751752182819051981
$891990
109011891289138814881587168717861886198520852185228423842483
1083118312821382148115811680178018791979207821782277237724762576
$98110581134121112871364144015171594167017471823190019762053
11291206128213591435151215881665174218181895197120482124
127713541430150715831660
$127513751474157416741773187319722072217122712370247025692669
14681567166717661866196520652164226423632463256326622762
166017601859195920582158
8 x 148 x 158 x 168 x 178 x 188 x 198 x 20
9 x 99 x 109 x 119 x 129 x 139 x 149 x 159 x 169 x 179 x 189 x 199 x 20
10 x 1010 x 1110 x 1210 x 1310 x 1410 x 1510 x 1610 x 1710 x 1810 x 1910 x 20
$1736181318891966204321192196
142515021578165517311808188419612037211421912267
15731650172618031879195620322109218522622339
$2257235724562556265527552854
185219522052215122512350245025492649274828482947
20452144224423432443254226422742284129413040
4 x 44 x 54 x 64 x 74 x 84 x 94 x 104 x 114 x 124 x 134 x 144 x 154 x 164 x 174 x 184 x 194 x 20
5 x 55 x 65 x 75 x 85 x 95 x 105 x 115 x 125 x 135 x 145 x 155 x 165 x 175 x 185 x 195 x 20
2 x 32 x 42 x 52 x 62 x 72 x 82 x 92 x 102 x 112 x 122 x 132 x 142 x 152 x 162 x 172 x 182 x 192 x 20
3 x 33 x 43 x 53 x 63 x 73 x 83 x 93 x 103 x 113 x 123 x 133 x 143 x 153 x 163 x 173 x 183 x 193 x 20
6 x 66 x 76 x 86 x 96 x 106 x 116 x 126 x 136 x 146 x 156 x 166 x 176 x 186 x 196 x 20
7 x 77 x 87 x 97 x 107 x 117 x 127 x 137 x 147 x 157 x 167 x 177 x 187 x 197 x 20
8 x 88 x 98 x 108 x 118 x 128 x 13
2Part 12” D/F Body with 2Part Large Inner Frame and 2Part Large Outer FramePart #1929 Part #1959 Part #1941
Included in Sign Cabinet Kit Pricing:! Mill finish or Pre-Painted.! Four (4) pieces of cut to size and mitered 2Part 12" Double
Face Body, Part #1929.! Eight (8) pieces of cut to size and mitered 2Part Large Inner
Frame, Part #1959.! Eight (8) pieces of cut to size and mitered 2Part Large Outer
Frame, Part #1941.! All screws required to assemble by mechanical fastening. Note: Raceway Cover Screws are not included.! All Body Corner Angles and/or Corner Keys required.! Packaging.! Cut to size 2Part Large Hinge, Part #5997.! Four (4) 2Part Large Locks, Part #5993.
Not Included in Sign Cabinet Kit Pricing:! Faces.! Electrical Components.! Internal Supports.
Not Included (Cont.)! Attachment of Hinge.! Drilling of holes for locks and attachment of locks.! Gas supports and mounting hardware.
Optional Accessories:! Ballast Pan(s). See page 6! Raceway Covers. See pages 6 & 7! Divider Bar. See pages 4, 9 & 29! Gas Supports and Mounting Hardware. See page 29
Kit Sizes and Availability:! It is recommended to order kits 1-3/4" over nominal T-12
lamp size to utilize .040 flat Aluminum Raceway Covers.! Custom size kits may be cut to any dimension.
Recommended Lamp Spacing:! For flat plastic, illuminated backgrounds - 9" on center,
using T-12 lamps.! For pan formed faces use guideline for lamp spacing, see
General Information on page 31.
Cut To Size Dividers:! See options page 29
General Information:! Finishes. See page 31! Additional information. See page 31! Cut to size and pre-cut kits are available locally through
select sign supply distributors.! The Inner Frame retains the inner face. See page 10! The Outer Frame retains the vandal cover. See page10
16-5/8”
NOTE: It is recommended to use safety chains and prop-bars on hingeable faces.
Top, Bottom & Both Sides
S T A N D A R D K I T S
Standard System Options
29
Part
Part
Part
Length Unit Price
PartNumber
PartNumber
PartNumber
Cut to Size Cost Per FootMill Finish Pre-painted
PriceEach
Hardware
Channel Letter Raceways
Cut To Size Dividers1905 $3.43 $4.45
Gas Support Included: (2) Gas Supports (2) Ball Stud Mounting Brackets (4) 10mm Ball Studs Screws for mechanical fastening.
5934-Kit
2Part DividerIncluded: Screws for mechanical fastening. Divider Angles, Part #5300.
1940 &1942/1960
8.40 10.922Part Extended Retainer2Part Vandal SystemIncluded: Screws for mechanical fastening. Divider Angles 2”x 2” x 1/8” (3/4”), Part#5980. Corner Angles and Corner Keys. 2Part Hinge.
1942/1960 &1942/1960
9.30 12.092Part Vandal System2Part Vandal SystemIncluded: Screws for mechanical fastening. Divider Angles 2”x 2” x 1/8” (3/4”), Part #5980. Corner Angles and Corner Keys. 2Part Hinge.
1939 &1941/1959
1941/1959 &1941/1959
15.02
21.90
19.52
28.47
2Part Large Extended Retainer2Part Large Vandal SystemIncluded: Screws for mechanical fastening. Divider Angles 2” x 2” x 1/8” (3/4”), Part #5980. Corner Angles and Corner Keys. 2Part Large Hinge.
2Part Large Vandal System2Part Large Vandal SystemIncluded: Screws for mechanical fastening. Divider Angles 2” x 2” x 1/8” (3/4”), Part #5980. Corner Angles and Corner Keys. 2Part Large Hinge.
$50.33
S T A N D A R D K I T S
2 Piece 8” Channel Letter Raceway One (1) 2 Piece 8” Channel Letter Raceway - Front One (1) 2 Piece 8” Channel Letter Raceway - Back One (1) 8” Channel Letter Raceway CoverNot Included: Hardware, Brace/Brackets, Mounting Clips or End Caps
B1982 24’-2” 323.28Cost per Foot 13.38
2 Piece 8” Narrow Channel Letter Raceway One (1) 2 Piece 8” Channel Letter Raceway - Front One (1) 2 Piece 8” Narrow Channel Letter Raceway - Back One (1) 8” Narrow Channel Letter Raceway CoverNot Included: Hardware, Brace/Brackets, Mounting Clips or End Caps
B1982N 24’-2” 276.98Cost per Foot 11.46
2 Piece 5” Channel Letter Raceway One (1) 2 Piece 5” Channel Letter Raceway - Front One (1) 2 Piece 5” Channel Letter Raceway - Back One (1) 5” Channel Letter Raceway CoverNot Included: Hardware, Brace/Brackets, Mounting Clips or End Caps
B1972 24’-2” 206.77Cost per Foot 8.56
2 Piece 5” Narrow Channel Letter Raceway One (1) 2 Piece 5” Channel Letter Raceway - Front One (1) 2 Piece 5” Narrow Channel Letter Raceway - Back One (1) 5” Narrow Channel Letter Raceway CoverNot Included: Hardware, Brace/Brackets, Mounting Clips or End Caps
B1972N 24’-2” 177.92Cost per Foot 7.36
Unassembled Wall Frames & Edge Lit LED Kits
30
3/4” Wall Frame
Edge Lit LED 1/2 Round
1-3/8” Wall Frame
Edge Lit LED 1/4 Round
Part #1948
Part #1995
Part #1949
Part #1996
Included in Wall Frame Kit Pricing:! Clear Anodized Finished.! Four (4) pieces of cut to size and mitered 3/4" Wall Frame, Part #1948.! Four (4) #6 x 3/4" counter sunk S.S. Sq./phillips head screws, Part #5245.! Vertical end pieces are pre-drilled and counter sunk.
Not Included in Wall Frame Kit Pricing:! Face.! Mounting Hardware.
Included in Edge Lit LED Kit Pricing:! Cut to Length LED profile Mill Finish.! Two (2) End Caps.! Four (4) #6 x 3/8" Cap Screws.! All spring pins required for assembly.! NOT INCLUDED: Face, LED’s and electrical components .
Included in Edge Lit LED Kit Pricing:! Cut to Length LED profile Mill Finish.! Two (2) End Caps.! Four (4) #6 x 3/8" Cap Screws.! All spring pins required for assembly.! NOT INCLUDED: Face, LED’s and electrical components .
ClearAnodized
Finish
MillFinish
MillFinish
$29303234374249576472788793
102
323437394452606874819097
106
$5556575860626365
$5255565758606163
Size HxW
LengthInches
LengthInches
12 x 1212 x 1812 x 2412 x 3012 x 3612 x 4812 x 6012 x 7212 x 8412 x 9612 x 10812 x 12012 x 13212 x 144
18 x 1818 x 2418 x 3018 x 3618 x 4818 x 6018 x 7218 x 8418 x 9618 x 10818 x 12018 x 13218 x 144
1215182430364248
1215182430364248
Size HxW
ClearAnodized
Finish
$34414749576472788793
102109
414452606874819097
106112
24 x 2424 x 3024 x 3624 x 4824 x 6024 x 7224 x 8424 x 9624 x 10824 x 12024 x 13224 x 144
30 x 3030 x 3630 x 4830 x 6030 x 7230 x 8430 x 9630 x 10830 x 12030 x 13230 x 144
Size HxW
ClearAnodized
Finish
$49576472788793
102109117
6472788793
102109117124
788793
102109117124132
36 x 3636 x 4836 x 6036 x 7236 x 8436 x 9636 x 10836 x 12036 x 13236 x 144
48 x 4848 x 6048 x 7248 x 8448 x 9648 x 10848 x 12048 x 13248 x 144
60 x 6060 x 7260 x 8460 x 9660 x 10860 x 12060 x 13260 x 144
Size HxW
ClearAnodized
Finish Size HxW
ClearAnodized
Finish
ClearAnodized
FinishSize HxW
1-7/
8”1-
9/16
”
1-9/
16”
1/2”
1/2” 1/2”
3-1/4” 2-1/8”
3/4”
3/16”
3/4” Wall Frame Part #1948
(Width)
(Hei
ght)
(Width)
(Hei
ght)
3/4”
2”1-
3/8”
3/8”
1-3/8” Wall Frame Part #1949
$3133374043515968778896
106113124
394144485662738191
100110120128
12 x 1212 x 1812 x 2412 x 3012 x 3612 x 4812 x 6012 x 7212 x 8412 x 9612 x 10812 x 12012 x 13212 x 144
18 x 1818 x 2418 x 3018 x 3618 x 4818 x 6018 x 7218 x 8418 x 9618 x 10818 x 12018 x 13218 x 144
$4749526068778896
106113124133
495462738191
100110120128139
24 x 2424 x 3024 x 3624 x 4824 x 6024 x 7224 x 8424 x 9624 x 10824 x 12024 x 13224 x 144
30 x 3030 x 3630 x 4830 x 6030 x 7230 x 8430 x 9630 x 10830 x 12030 x 13230 x 144
Included in Wall Frame Kit Pricing:! Clear Anodized Finished.! Four (4) pieces of cut to size and mitered 1-3/8” Wall Frame, Part #1949.! Four (4) #6 x 3/4" counter sunk S.S. Sq./phillips head screws, Part #5245.! Vertical end pieces are pre-drilled and counter sunk.
Not Included in Wall Frame Kit Pricing:! Face.! Mounting Hardware.
36 x 3636 x 4836 x 6036 x 7236 x 8436 x 9636 x 10836 x 12036 x 13236 x 144
48 x 4848 x 6048 x 7248 x 8448 x 9648 x 10848 x 12048 x 13248 x 144
60 x 6060 x 7260 x 8460 x 9660 x 10860 x 12060 x 13260 x 144
$5968778896
106113124133142
778896
106113124133142152
96106113124133142152162
S T A N D A R D K I T S
Additional Information
31
Freight Policy Return Policy! !The freight shall be prepaid, F.O.B. Grand Rapids, Michigan for single Returns of SignComp products will not be accepted without prior orders of extrusions and/or accessories whereby the invoiced amount is authorization and written RMA number from SignComp.
!$5,000.00 or more to any single destination within the continental Materials may not be returned for any reason other than defective product United States or Canada. or incorrect fulfillment of order.
! !The freight shall be collect, F.O.B. Grand Rapids, Michigan for all orders All goods to be returned must be acknowledged in writing within the other than as stated in this freight policy. 60 day grace period from the date of the shipment. Any claims after this
! All freight claims for freight collect shipments are the sole responsibility period will be considered invalid.!of the buyer. All returned goods must be in new and saleable condition for full credit
! Any requests for expedited freight services shall be the sole expense of to be issued.the buyer.
Additional Product Offerings! Combining stock items with custom run items qualifies for freight ! Custom extrusions. Mill shipment programs.prepaid status only when all items ship as one shipment.! Pre-painted and cut to length extrusion programs.
Minimum OrderBackorder Policy! Any single full length extrusion profile and/or prepackaged accessories.! In the very unlikely event of a back order, the back order will be shipped ! Any single kit.freight prepaid only if the original order qualified for freight prepaid status.
!Availability Additional materials may be added to any back order, shipped freight ! Typical extrusion and accessory orders ship within three (3) days upon prepaid with the additional freight expense the responsibility of the buyer.
!receipt and acceptance of your purchase order. Any expedited freight service requested by the buyer shall be at the expense ! All orders will receive an approximate ship date upon receipt and of the buyer. acceptance of the written purchase order and confirmation.
Additional Information
Exclusive Warranty and Remedies
GeneralInformation
Included inKit Pricing
Not Includedin Kit Pricing
Optional Accessories:
Mill Finish
Pre-Painted
Pricing
! The bodies and retainers should be cut 1-3/4" longer than the nominal T-12 lamp size for horizontal or vertical lamping.!General guide lines for lamp spacing: Double the distance between the front of the lamp and the back of the plastic face for your center to center lamp measurement. Maximum center to center is 12".
! Extrusion bodies and retainers are engineered for mechanical fastening, bonding with adhesive, or welded assembly.!Divider Bars and usage see page 29.! Assembly sheets available.
! Mill Finish or Pre-Painted.! Cut to size and mitered bodies.! Cut to size and mitered retainers.! All Body Corner Angles and/or Corner Keys as required.! Packaging.
Included in Vandal System:! Cut to size and mitered Inner Frame(s).! Cut to size and mitered Outer Frame(s).! Cut to size Hinge.! Locks.
! Faces and Backs.! Electrical components.! Structural supports, Back Braces and Gussets.! Attachment of Hinge.! Drilling of holes for locks and attachment of locks.
! Ballast Pan(s). See page 6.! Raceway Covers. See page 6 & 7.
! Gas Supports and mounting hardware. See page 29.! Divider Bar. See page 29.
! No prior surface preparation. Surface scratches, die lines and imperfections present. Not ready for paint.
! Exposed aluminum surfaces are coated with Quaker Dark Bronze primer/topcoat.! Limited additional colors are available, minimum order will apply.
! All prices are effective as of March 1, 2007. Due to fluctuation in the raw aluminum market, prices are subject to change without notice.! Standard packaging is included in list prices.! Freight shall be collect, F.O.B. SignComp.
! In effect as of January 1, 2008. REMEDIES! This is the exclusive warranty policy of SignComp, LLC, Grand Rapids, Michigan 49544 (the ! Provided that the warranty procedures are followed, the Company will repair and/or replace the
"Company") with respect to any and all of its products. defective SignComp product(s) during the applicable warranty period without charge for parts or labor.
EXCLUSIVE WARRANTY! Repair and/or replacement of defective SignComp products is your exclusive remedy under the
! The Company warrants you as the original purchaser that the Company's products will be free from Company's exclusive warranty.defects in materials and workmanship, under normal conditions, upon shipment of said products
! The Company shall not be liable for any incidental or consequential damages if the Company's from the Company, for 30 days. product is defective or does not conform to this exclusive warranty. In any event the maximum ! This exclusive warranty does not apply to damage caused by improper handling. The company amount for which the Company shall be liable to the purchaser shall be the original purchase price
shall have no liability or responsibility for any damage whatsoever caused by handling. of the defective SignComp product(s).! The Company hereby disclaims any and all other warranties, including, without limitation, implied ! Any claim for breach of this exclusive warranty shall be brought, if at all, no later than 30 days from
warranties of merchantability and fitness for a particular purpose. The only warranty with respect the Company's breach.to the Company's products is described in this exclusive warranty. No oral or written representations shall extend the Company's exclusive warranty beyond the description herein. ADDRESS FOR NOTIFICATION
! Notice of a product defect covered by this exclusive warranty can be made in writing or by WARRANTY PROCEDUREStelephone. The Company's address and telephone number are:! The purchaser must notify the Company of any warranty claim prior to initiating any remedy upon
SignComp, LLC, 3032 Walker Ridge Dr., Grand Rapids, MI 49544the defective product. Upon receipt of such notice, the Company will direct that an authorized representative inspect the product and, if necessary, correct the defect in accordance with this Attention: Customer Service - Phone: (616) 784-0405exclusive warranty. The Company shall have the exclusive right to determine whether or not a Toll Free: (877) 784-0405defect is covered by this exclusive warranty. Fax: (616) 784-0411
e-mail: [email protected]
S T A N D A R D E X T R U S I O N S
3032 Walker Ridge Dr.Grand Rapids, MI 49544U.S.A.toll free: (877) 784-0405 (US and Canada)local: (616) 784-0405fax: (616) 784-0411e-mail: [email protected] [email protected]
SignComp LLC.
S I G N E X T R U S I O N S A N D K I T S
Environmental ly Fr iendly Products Processes Faci l i ty
Our Mission: To promote business and personal practices that will decrease ourimpact on the environment and minimize our carbon footprint by reducing thedemands placed upon our planet in an earth-friendly way.