stainless steel grates and grilles architectural bronze grates

Our Distinctive, Quality Product Line:

KD98 1-1/8" Stainless Steel Grating

KD58 5/8" stainless Steel Grating

KD38 3/8" stainless Steel Grating

ENTEC 3/8" & 5/8" stainless Steel Grating with Carpet Inserts

Spec Sections 12 4813 12 48 16 12 48 23

LESS STEEL GRATING SYSTEMS AND ENTRANCE MATS

KDAL Aluminum Bar Grating

KDBR Bronze Bar Grating

KDCM & KDVM Aluminum Roll-Out Entrance Mats

I Stainless Steel Grates and Grilles

I Aluminum Grates and Grilles

I Architectural Bronze Grates and Grilles

I Aluminum Roll-Out Mat Systems

t Aluminum Entrance Grid Systems

KDCP & KDVP Aluminum Entrance Grids <AD

NDUSTRIESJNC

1-1/4" x 1-1/4" x 1/8" SS ANGLE

GROUT/SLABTO THIS LEVEL

HIDDEN LOCKDOWN

.071"1/8" 1/8".177"

1-1/8"

EXPANSIONANCHOR

ANCHORS & FRAME HOLESBY OTHERS EVERY 18" TO 24"

SSS Clean Tread™1 1/8” STAINLESS STEEL GRATING

MODEL KD98

Applications

Specifi cations

Sec� on 12 48 16 Entrance Floor Grilles

Furnish and install SSS Clean Tread KD98 Stainless Steel Grating as manufactured by Kadee Industries, Walton Hills, Ohio. Phone: (800) 321-3827

Construc� on:

Tread Material manufactured from Type 304 Stainless Steel .071” x .177” surface wires spaced with a .125” slot opening and resistance welded to .070” x 1.0” Type 304 Stainless Steel support rods spaced 1” on center.

Construc� on Each juncture of surface wires to support rods shall have electric resistance welded joints. Hidden or visual locking devices are provided to fasten gra� ng.

Framing 6063-T6 Extruded Aluminum or Type 304 Stainless Steel. Custom pit liners are available in aluminum or stainless steel for drainage or evapora� on applica� ons.

Warranty 5 years - details on back cover.

Specifi cally designed to span up to 3’0” without supports, with the ability to withstand a live load of 500 lbs. per square foot. Perfect for drains and trenches.

Rolling Load Capacity - 1,000 lbs. per wheel

Wires are evenly spaced providing safe support for high heels, canes, wheelchairs, crutches and other walking aids.

Custom designs available to fi t almost any applica� on.

59.9% air fl ow, great for registers.

Self-cleaning design reduces regular maintenance costs.

ENTRANCE GRILLES:

LEVEL BED AND PIT APPLICATIONS

TRENCH DRAIN GRILLES

TREE GRATES

FOUNTAIN / POOL GRATES

REVOLVING DOORS

AIR GRILLES

Durable, Practicalwith the long-lasting beauty of stainless steelwith the long-lasting beauty of stainless steel

S A F E , S E L F - C L E A N I N G , S TA I N L E S S S T E E L E N T R A N C E S Y S T E M S

LEED InformationEnvironmental concerns are an important considera� on to specifi ers making material selec� ons for products. Stainless steel’s long service life and 100% recyclability make it an excellent environmental performer. Kadee Industries’ SSS Clean Tread Stainless Steel Gra� ng is manufactured from stainless steel comprised of 80% post consumer recycled content and 15% pre-consumer recycled content.

1-1/4" x 1-1/4" x 1/8" SS PERIMETER ANGLE

HIDDEN LOCKDOWN.177"

1/8"

1/8"

.071"

1-1/8"

SHIM

1-1/2" x 1-1/2" x 3/16"SS SUPPORT ANGLE

KD98 SS Gra� ng SS Drainage Pit Frames KD98 SS Gra� ng SS Level Bed

7160 Krick Rd • Walton Hills, OH 44146 • (800) 321-3827 Ph. • (440) 439-6889 Fax • www.kadeeindustries.com • [email protected]

-2-

WALKINGDIRECTION

X

Y

A & E

LC

Sec� on A & E Sec� on A & E

LEED InformationEnvironmental concerns are an important considera� on to specifi ers making material selec� ons for products. Stainless steel’s long service life and 100%recyclability make it an excellent environmental performer. Kadee Industries’ SSS Clean Tread Stainless Steel Gra� ng is manufactured from stainless steel comprised of 80% post consumer recycled content and 15% pre-consumer recycled content.

SSS Clean Tread™5/8” STAINLESS STEEL GRATING

ApplicationsENTRANCE GRILLES:

LEVEL BED

AIR GRILLES

LIGHT DIFFUSERS

REVOLVING DOORS

CEILING AND WALL APPLICATIONS


MODEL KD58

Specifi cations


Furnish and install SSS Clean Tread Model KD58 Stainless Steel Gra� ng as manufactured by Kadee Industries, Walton Hills, Ohio. Phone: (800) 321-3827

Construc� on:

Tread Material manufactured from Type 304 Stainless Steel .071” x .177” surface wires spaced with a .125” slot opening and resistance welded to .070” x 0.5” Type 304 Stainless Steel support rods spaced 1” on center.

Construc� on Each juncture of surface wires to support rods shall have electric resistance welded joints. Hidden or visual locking devices are provided to fasten gra� ng.

Framing 6063-T6 Extruded Aluminum or Type 304 Stainless Steel. There are custom-made pit liners available in aluminum or stainless steel for drainage or evapora� on applica� ons.


Multiple Uses,designed to meet a variety of needs.designed to meet a variety of needs.

Designed for shallow, level bed recessed applica� ons for new construc� on or recessed applica� ons for new construc� on or renova� on.renova� on.

Wires are evenly spaced providing safe Wires are evenly spaced providing safe support for high heels, canes, wheelchairs, crutches and other walking aids.


59.9% air fl ow, great for registers.

Self-cleaning design reduces regular main-tenance costs.

Slip Resistant with a minimum Coeffi cient of Fric� on of 0.6 in dry and wet tes� ng.

Rolling Load Capacity - 1,000 lbs. per wheel

7160 Krick Rd • Walton Hills, Ohio 44146 • (440) 439-8650 Phone • (440) 439-6889 Fax • www.kadeeindustries.com 2


-3-

KD383/8” STAINLESS STEEL GRATINGThe KD38 is similar to the model KD58, but at 3/8” thickness. It is an excellent alterna� ve to aluminum or vinyl entrance mats, with a much longer life and lower maintenance. KD38 was designed as an ideal replacement or upgrade to standard worn out roll-out mats.

1-1/2"

1/8"

1-1/8"

HIDDEN LOCKDOWNEMBEDDED FRAME

1/8" .177"

5/8"

.071"


7/16" x 3/4" TIE BAR& TIE BAR CLIP

3/4" x 3/4" x 1/8" SS ANGLE

EXPANSION ANCHORGROUT/SLABTO THIS LEVEL

5/8"

HIDDEN LOCKDOWN1/8"1/8".071

"

.177"

FLAT STOCK INTERMEDIATES& NON-CONTINUOUSASSEMBLY BRACKET

KD58 SS Gra� ng SS Frame KD58 SS Gra� ng Aluminum Frame

WALKINGDIRECTION

X

Y

A & E

LC

Sec� on A & E Sec� on A & E

SSS Clean Tread™5/8” STAINLESS STEEL GRATING WITH CARPET INSERTS

MODEL ENTEC-58™

Applications

ENTRANCE GRILLES:

LEVEL BED APPLICATIONS



Furnish and install SSS Clean Tread Model ENTEC™-58 Stainless Steel Gra� ng as manufac-tured by Kadee Industries, Walton Hills, Ohio. Phone: (800) 321-3827

Construc� on:

Tread Material manufactured from Type 304 Stainless Steel .090” x .172” surface wires spaced with a .145” slot opening and resis-tance welded to .125” x .500” stainless steel support rods spaced 2” on center and 1-3/8” wide x .036” formed stainless steel tread insert channels spaced 4” on center.

Construc� on Each juncture of surface wires to support rods shall have electric resistance welded joints. Hidden locking devices are provided to fasten gra� ng.

Framing 6063-T6 Extruded Aluminum or Type 304 stainless steel.

Carpet -Nylon Carpet Inserts: 100% Nylon 6 carpet fi bers fusion bonded to a polypropylene back-ing. -Heavy Duty Carpet Inserts: Polypropylene fi bers fusion bonded to a polypropylene backing.


The Ultimate Entranceway Solution for a Distinctive and Decorative AppearanceThe gra� ng is a combina� on of stainless steel surface wires, which create a cleaning/scraping process, along with carpet inserts spaced every 4” on center, to clean and dry shoe traffi c.

Designed for shallow recessed applica� ons for new construc� on or renova� on.

Self-cleaning design reduces regular maintenance costs.

Wires are evenly spaced providing safesupport for high heels, wheelchairs, crutches, canes and other walking aids.


LEED InformationEnvironmental concerns are an important considera� on to specifi ers making material selec� ons for products. Stainless steel’s long service life and 100 percent recyclability make it an excellent environmental performer. Kadee Industries’ SSS Clean Tread Stainless Steel Gra� ng is manufactured from stainless steel comprised of 80% post consumer recycled content and 15% pre-consumer recycled content.

Specifi cations



-4-

ENTEC-383/8” STAINLESS GRATING

Similar to the model ENTEC-58, but at 3/8” thickness. Excellent alterna� ve to aluminum or vinyl entrance mats, with a much lon-ger life and lower maintenance. ENTEC-38 was designed as an ideal replacement or upgrade to standard aluminum roll-out mats.

3/4" x 3/4" x 1/8" SS ANGLE

VARIES UPONSIZE OF UNIT

1"

1-3/8" .090"CARPET INSERT

.145".172"

GROUT/SLABTO THIS LEVELEXPANSION ANCHOR

WELD IN HIDDEN LOCKDOWN TAB

4" O.C.

5/8"

Entec-58 SS Gra� ng SS Frame Entec-58 SS Gra� ng Aluminum Frame

EMBEDDED ALUMINUM FRAME

VARIES UPONSIZE OF UNIT CARPET INSERT

1-3/8" .090"

.145"1" .172"

5/8"

4" O.C.

WELD IN HIDDEN LOCKDOWN TABGROUT/SLABTO THIS LEVEL

WALKINGDIRECTION

X

Y

A & E

LC

Sec� on ASec� on A

Designed for level bed or pit applica� ons.

Self cleaning design limits tracked-in dirt or mud.

Designed for 50% free air fl ow, making this ideal for air registers.

All metal tread bar design eliminates carpet maintenance.


Rolling Load Capacity - 350 lbs. per wheel

Bar Clean Tread™Bar Clean Tread™BarALUMINUM BAR GRATING AND BRONZE BAR GRATING

MODELS KDAL & KDBR

Applications

ENTRANCE GRILLES:

LEVEL BED OR PIT APPLICATIONS

AIR GRILLES

LIGHT DIFFUSERS

CEILING AND WALL APPLICATIONS

S E L F - C L E A N I N G B A R G R AT I N G , E N T R A N C E M AT S & A I R G R I L L E S


Furnish and install Bar Clean Tread Model KDAL, Aluminum Bar Gra� ng as manufac-tured by Kadee Industries, Walton Hills, Ohio. Phone: (800) 321-3827

Construc� on

Tread Bars manufactured from 6063-T6 Extruded Aluminum with 1.175” x .25” tread bars. Tread bar surface is provided with round grove contours for improved cleaning ac� on, running the length of the bar.

Construc� on Tread Bars are assembled with stainless steel rods, stainless steel nuts and nylon 66 spacers with a .25” max. slot opening.

Framing 6063-T6 Extruded Aluminum. Cus-tom pit liners are available in aluminum for drainage and evapora� on applica� ons.

Finish Standard mill. Anodized fi nishes available upon request.


LEED InformationAluminum is a unique metal: durable, fl exible, lightweight, corrosion-resistant and 100% recyclable. Kadee Industries’ Bar Clean Tread Aluminum Gra� ng is manu-factured from extruded aluminum comprised of 32.5% post-consumer recycled content and 32.5% pre-consumer recycled content.

Specifi cations



-5-

KDAL Aluminum Frame Drainage Pit Applica� on KDAL Aluminum Frame Level Bed Applica� on

HIDDEN LOCKDOWN

THREADED ROD

SS RETENTION NUT

7/16" x 3/4" TIE BAR


TIE BAR CLIP

1/4"1/4"

1/4"1/8"

1/8"

1-5/8"

SPACERS

1-3/16"

SPACERS

THREADED RODSS RETENTION NUT

EMBEDDED FRAME

HIDDEN LOCKDOWN

1/4"

1/4"1/8"

1/4"

1/8"

1-5/8"

7/16"

1-1/2"

1-1/2" x 1-1/2" x 3/16"AL ANGLE

SHIM

1-3/16"


Economical, Lightweight Aluminum Grating Sections They’re easy to handle, and hold-up well in numerous installa� ons. They’re easy to handle, and hold-up well in numerous installa� ons. As one of our most economical products, Kadee’s aluminum gra� ng As one of our most economical products, Kadee’s aluminum gra� ng only requires occasional mopping and can be li� ed to remove dirt only requires occasional mopping and can be li� ed to remove dirt which has collected beneath the non-clogging tread bars, making this which has collected beneath the non-clogging tread bars, making this product virtually maintenance free.product virtually maintenance free.

KDBR ARCHITECTURAL BRONZE BAR GRATING

Have your next project refl ect the added luxury and pres� ge of Kadee’s Architectural Bronze Gra� ng. When style, func� onality and durability are of the utmost im-portance, be sure to specify KDBR Architectural Bronze Gra� ng. The construc� on of the KDBR is similar to the KDAL, with .8125” x .25” tread bars. Available with architectural bronze angle framing.

Add Beauty and Elegance to Your Design

WALKINGDIRECTION

X

Y

A & E

LC

Sec� on A & E Sec� on A & ESec� on A & E

Mat Clean Tread™ALUMINUM ROLL-OUT MAT WITH CARPET OR VINYL INSERTS

MODELS KDCM & KDVM

ApplicationsENTRANCE MATS:

SHALLOW RECESS WITH FRAME

SURFACE MOUNTED WITH VINYL RAMPS

H I G H Q U A L I T Y, L O W C O S T A L U M I N U M R O L L - O U T E N T R A N C E M AT S Y S T E M S

Specifi cations

LEED InformationAluminum is a unique metal: durable, fl exible, lightweight, corrosion-resistant and 100% recyclable. Kadee Industries’ Mat Clean Tread Aluminum Mats are manufac-tured from extruded aluminum comprised of 32.5% post-consumer recycled content and 32.5% pre-consumer recycled content.

Sec� on 12 48 13 Entrance Floor Mats

Furnish and install Mat Clean Tread Model KDCM or KDVM, Aluminum Roll-Out Entrance Mats as manufactured by Kadee Industries, Walton Hills, Ohio. Phone: (800) 321-3827

Construc� on:

Tread Rails manufactured from 6063-T6 Extruded Aluminum with tread rails spaced on 1-1/2” on center. Tread Rails are connected with vinyl hinges and sit on vinyl cushions with op� onal drainage holes.

Framing 6063-T6 Extruded Aluminum. Op� onal tapered vinyl ramps, for surface mounted units.

Finishes Standard mill. Anodized fi nishes available upon request.

Carpet -Nylon Carpet Inserts: 100% Nylon 6 carpet fi -bers fusion bonded to a polypropylene backing. -Heavy Duty Carpet Inserts: Polypropylene fi bers fusion bonded to a polypropylene backing.

Vinyl Serrated, nonslip surface with a con-vex design for improved drainage.


The High Qualitylow cost alternative

Reduces tracked-in dirt, slush, and mud.Reduces tracked-in dirt, slush, and mud.

Ball and socket hinge design allows for easy roll-up for cleaning.

Inserts closely spaced to prevent crutch � ps and canes from catching.

Vinyl hinges eliminate metal-to-metal ra� le and corrosion lockup.





-6-

KDCM Vinyl Ramps

2" WIDE PERIMETER RAMP

FLATHEAD SCREW &PLASTIC ANCHOREVERY 18" TO 24"

SURFACE MOUNTED

BLACK VINYL FILLER(as required)

FINISH FLOOR

NO FRAME

1-1/8"

3/16"

VINYL INSERTS

KDCM Aluminum Frame

CARPET INSERT

VINYL PADSYSTEM VINYL HINGE

SYSTEM

GROUT/SLAB TOTHIS LEVEL

EMBEDDEDFRAME

1-1/2" O.C.BLACK VINYL FILLER(as required)

1-1/2"

7/8"7/16"

1-1/8"

3/16"

3/8"WALKINGDIRECTION

X

Y

A & E

LC

Sec� on ASec� on A

Arc Clean Tread™ALUMINUM GRID WITH CARPET OR VINYL INSERTS

MODELS KDCP & KDVP

ApplicationsENTRANCE GRIDS:LEVEL BED OR PIT APPLICATIONS

P R A C T I C A L & E C O N O M I C A L A L U M I N U M E N T R A N C E G R I D S Y S T E M S

Specifi cations

LEED InformationAluminum is a unique metal: durable, fl exible, lightweight, corrosion-resistant and 100% recyclable. Kadee Industries’ Mat Clean Tread Aluminum Entrance Grids are manufactured from extruded aluminum comprised of 32.5% post-consumer recycled content and 32.5% pre-consumer recycled content.

Section 12 48 23 Entrance Floor Grids

Furnish and install Arc Clean Tread KDCP or KDVP Entrance Floor Grids as manufactured by Kadee Industries, Walton Hills, Ohio. Phone: (800) 321-3827

Construction:

Tread Rails manufactured from 6063-T6 alumi-num with tread rails spaced 1-1/2” on center with 2” drainage slots spaced 6” on center. Tread rail sections sit on vinyl cushions. Framing 6063-T6 Extruded Aluminum. Custom pit liners are available in aluminum for drainage and evaporation applications.

Finishes Standard mill. Anodized fi nishes avail-able upon request.

Carpet -Nylon Carpet Inserts: 100% Nylon 6 carpet fi bers fusion bonded to a polypropylene backing. -Heavy Duty Carpet Inserts: Polypropylene fi bers fusion bonded to a polypropylene backing.

Vinyl Serrated, nonslip surface with a convex design for improved drainage.


Practical and Economical

Reduces tracked-in dirt, slush, and mud.

Available for level bed or pit applications.

Drainage slots keep dirt and water away from walking surface.

Inserts closely spaced to prevent crutch tips, high heels and canes from catching.

Custom designs available to fi t almost any application.


7160 Krick Rd • Walton Hills, Ohio 44146 • (440) 439-8650 Phone • (440) 439-6889 Fax • www.kadeeindustries.com 27160 Krick Rd • Walton Hills, Ohio 44146 • (440) 439-8650 Phone • (440) 439-6889 Fax • www.kadeeindustries.com 2


-7-

KDCP Aluminum Frame Pit Applica� on KDCP Aluminum Frame Level Bed Applica� on

EMBEDDED FRAME DRAINAGE SLOT (TYP)

1-1/2"O.C.

1-1/2"

CARPET INSERT

VINYL PADGROUT/SLABTO THIS LEVEL

1"

1-9/16"5/16"

5-3/4"

1-5/16"

1-1/8"

1/16"

7/16"2"

EMBEDDED FRAMECARPET INSERT

1-1/2" x 1-1/2" x 3/16"ALUMINUM ANGLE

DRAINAGE SLOT

1/16"

1-9/16"5/16"

SHIM

VINYL PAD

VINYL INSERTS

WALKINGDIRECTION

X

Y

A & E

LC

Sec� on ASec� on ASec� on A & ESec� on A & E

Product WarrantyKadee Industries warrants to its purchasers that any product will be free from defects in material workmanship. The liability of Kadee Industries is strictly limited to the repair or replacement of units that, in the opinion of the fac-tory, were properly applied and installed and subsequently found to be defec-�ve. No claims for consequen�al damages of any nature will be allowed. This warranty is in lieu of all other warran�es, expressed or implied.

Kadee Industries reserves the right to make product changes or withdraw any design without no�ce.

For More Product InformationKadee Industries is the leader in stainless steel grating and entrance floor-ing solutions. With over a half century of product design, development and fabrication, our team is uniquely qualified to provide high quality products at competitive prices. If you have any questions or comments or require further documentation, please contact us at (800) 321-3827 or via email at [email protected].

Entrance Gra�ng:

- Cadillac Dealerships - Newseum - Washington, DC

- Cons�tu�on Center - Washington, DC - New York City Schools

- Cannon America Headquarters - Melville, NY - GSA/FDA Consolida�on at White Oak

- Comcast Center - Philadelphia, PA - U.S. Courthouse - Sea�le, WA

- U.S. Courthouse - San Diego, CA - Zuellig Building - Maka� City, Philippines

- IFC - United Arab Emirates

Trench Drains:

- Chicago Transit Sta�ons - Dallas Cowboy Training Center - Irvine, TX

- Sea World - Orlando, FL - Cornell Univ. - Life Science & Tech. Ctr. - Ithaca, NY

-409 & 499 Illinois Street - San Francisco, CA

Air Grilles:

- Carnegie Hall - New York, NY - George W. Bush Presiden�al Center - Dallas, TX

- Howard Hughes Medical Center - Chevy Chase, MD - CalPERS Headquarters - Sacramento, CA

- Robert Wood Johnson Univ. Hospital - Hamilton, NJ - Princeton University - Chemistry Building - Princeton, NJ

Fountain Gra�ng:

- Crown Fountain at Millennium Park - Chicago, IL - World War II Memorial - Washington, DC

- North End Parks - Boston, MA - San Jose Civic Center

- Marvell - US HQ Santa Clara, CA - Houdini Plaza - Appleton, WI

LEED Information Kadee Industries’ manufacturing policies and procedures create products compliant with the sustainability requirements of the USGBC LEED for new construc�on and major renova�ons and contribute to various LEED Credits. Kadee Industries is a member of the U.S. Green Building Council. For more informa�on, please feel free to visit our website h�p://www.kadeeindus-tries.com or contact us by email: [email protected]


KADEE GRATING SYSTEMS ARE USED AROUND THE WORLD

Toll Free: (800) 321-3827Phone: (440) 439-8650

Fax: (440) 439-6889Email: [email protected]

Website: www.kadeeindustries.com

7160 Krick Road, Walton Hills, Ohio 44146

T H E L E A D E R I N S TA I N L E S S S T E E L G R AT I N G S Y S T E M S A N D E N T R A N C E M AT S

© 2014 KADEE INDUSTRIES PRINTED IN THE U.S.A.

stainless steel grates and grilles architectural bronze grates

Documents