© FlexLink 2021 System information 21

PO

X70X

X85X

X180X

X300X

WL222X

WL273X

WL374X

WL526X

WL678X

CSX

GRX

FSTX

TR

APX

IDX

Stainless steel conveyor system X70XContentSystem information............................................................... 21Conveyor chain ..................................................................... 22Chain accessories X70X ........................................................ 22Conveyor beams ................................................................... 23Slide rails .............................................................................. 25Tools for conveyor beam....................................................... 26Drive and idler units – Introduction....................................... 27Drive units – configuration strings ........................................ 28End drive units ...................................................................... 29

Idler units .............................................................................. 30Bridges, drive unit to idler unit .............................................. 30Transfer units ........................................................................ 31Wheel bends X70X ................................................................ 32Plain bends............................................................................ 33Support rail for plain bends and S-transfer X70X.................. 34Vertical bends........................................................................ 35

System information

Conveyor with focus on robustness and cleanlinessThe stainless steel conveyor X70X was designed to suit the requirements of food, personal products, cosmetic, pharmaceutical and dairy applications.

Environment

• Operating temperatures –20 °C to +60 °C

• Operating humidity 10% to 95% RH

• See chapter Technical reference for Noise level

Chain width 68 mm

Improved cleanliness conveyorThe X70X conveyor system has been evaluated based on field experience and suggestions from customers. With focus on structure rigidness and robustness, easy design, and easier cleaning, several components have been improved with features like better drainage and smaller contact surfaces.

Technical characteristicsDrive unit capacity ............................. 800 NChain tension limit ............................. 800 NBeam width ........................................ 70 mmChain width ........................................ 68 mmChain pitch......................................... 25,4 mmItem width .......................................... 15 - 140 mmMaximum item weight ........................ 10 kgMaximum weight on conveyor ........... 200 kgMaximum conveyor length................. 30mMaximum weight on conveyor ........... 200 kgMaximum permitted load/link ............. 1,5 kg

22 Conveyor chain © FlexLink 2021

Conveyor chain

Chain accessories X70X

Plain chain

Plain chainLength 5 mStandard material XLTPX 5A70 K

Plain link kit*Standard material FLX1001236

* Link kit contains 10 links, 10 pivots, 10 steel pins

Flat friction top chain

Flat friction top chainLength 5 m XLTPX 5A70 KF

Friction top link kit* FLX1001237* Link kit contains 10 links, 10 pivots, 10 steel pins

Plastic pivot

Plastic pivot XS, XL 5111489Plastic pivot kit contains 25 items

Steel pin

Steel pin XS, XL 5111492Steel pin kit contains 25 items

Pin insertion tool for chain

Pin insertion tool XS-XL-XTXS-XL-XT, PRO version*

XLMJ 4XLMJ 4 P

*This product is recommended for frequent users.

Sleevex

Sleeve X70X FLX1004625Used for XLMJ 4

Sleeve

Sleeve X70X FLX1004056Used for XLMJ 4 P

34,1

34,1

© FlexLink 2021 Conveyor beams 23

PO

X70X

X85X

X180X

X300X

WL222X

WL273X

WL374X

WL526X

WL678X

CSX

GRX

FSTX

TR

APX

IDX

Conveyor beams

Conveyor beam, type X, 70 mm

Conveyor BeamLength 3 m (3000 ±1,5 mm)Length to order (150- 2999 mm)

XLCBX 3A70XLCBX LA70

All X70X beams are delivered fully assembled.

100 Ø8,37525

17 66 34

56,5

(C-C 475-4x500-475)/ 3000 mm beam

8,5

1110

37,5

34

8270

113

Conveyor beam, type Y, 70 mm

Conveyor BeamLength 3 m (3000 ±1,5 mm)Length to order (150- 2999 mm)

XLCBX 3A70YXLCBX LA70Y

All X70Y beams are delivered fully assembled, including 2 pcs of Screw kit 5114562.

113

Conveyor beam, type C, 70 mm

Conveyor BeamLength 3 m (3000 ±1,5 mm)Length to order (150- 2999 mm)

XLCBX 3A70CXLCBX LA70C

All X70X beams are delivered fully assembled.

24 Conveyor beams © FlexLink 2021

Conveyor beams (continued)

Beam spacer kit

Beam spacer kit for X70X XLCEX A70Including screws. The beams have pre-drilled 8,3 mm holes at 100 mm intervals that need to be increased to 10 mm see XLCBX 3A70.

Connecting bracket kit

Connecting bracket kit for X70X and X70Y, used to joint two beams see figure.

XLCJX A70

Including screws. The beams have pre-drilled 10 mm holes, see XLCBX 3A85.

Screw kit

Screw kit 5114562For return beam, type Y, 70 mm.

3434

6666

Beam section for chain installation

Beam section for chain installation XLCCX 300A70

Nut, stainless steel

Nut 2xM8Nut 1xM8

5113998 5114181

Nut with threaded hole (M8) for connection of sensors and other accessories when the conveyor chain is in place. By placing nuts inside the beam at the holes, accessories can be attached using M8 A4 screws.NOTE! Be careful when installing so no nut is dropped inside the beam, this can lead to a large additional work or operational damage.

M8

14

14

34

19

M8x2

14 60°

19

60°

16

20

4

4

© FlexLink 2021 Slide rails 25

PO

X70X

X85X

X180X

X300X

WL222X

WL273X

WL374X

WL526X

WL678X

CSX

GRX

FSTX

TR

APX

IDX

Slide rails

Plastic slide rails, narrow

Slide railLength 25 mHDPE (Black)PE-UHMV (White)PVDF (Transparent white)PA-PE (Grey) (Should not be used in wet applications)

XBCR 25XBCR 25 UXBCR 25 PXBCR 25 H

Plastic slide rails, wide

Slide railLength 25 mHDPE (Black)PE-UHMV (White)PVDF (Transparent white)PA-PE (Grey) (Should not be used in wet applications)

XBCR 25 BXBCR 25 UBXBCR 25 PBXBCR 25 HB

Note. The wide slide rails are not suitable for use in bends.

Mounting tool for slide rail

Mounting tool for slide rail XLMR 70

Stainless steel rivet

Stainless steel rivet, 4 mm XLAHX 4×7Note. Contains 25 pcs.

2,5

2,5

Drill fixture for slide rail

Drill fixture for slide raild=4,2 mm 3920500

Rivet crimping pliers

Rivet crimping pliersFor 4 mm rivets 5051395

Rivet crimping clamp

Rivet crimping clampFor 4 mm rivets(note: Allen key not included) 3923005

d mm∅

1560

23

4 mm

26 Tools for conveyor beam © FlexLink 2021

Tools for conveyor beam

Drill fixture

Drill fixture 5114621For use when additional holes are needed on the beam sides.Including:Drill 4,5 mmDrill 8,3 mmDrill 11,0 mmand instructions for use.

Drill

Twist Drills DIN 338 HSS-E (Co 8) Type N-HD Cobalt Alloyed, Split PointDrill 11,0 mmDrill 10,2 mmDrill 8,3 mmDrill 4,5 mmDrill 4,2 mm (for 3920500)

51150505115056511505151150525115053

For high strength alloys on CrNi base such as Hastelloy, Inconel, Monel, Nimonic, stainless steels, head and acid-proof steels (up to 1400 N/mm² tensile strength).

© FlexLink 2021 Drive and idler units – Introduction 27

PO

X70X

X85X

X180X

X300X

WL222X

WL273X

WL374X

WL526X

WL678X

CSX

GRX

FSTX

TR

APX

IDX

Drive and idler units – Introduction

Drive unit typesThe X70X system drive units capacities is maximum 800 N. The actual capacity depends on the speed. Available motors include variable speed types (V) as well as fixed speed motors (F).

End drive units

Motor specificationsMotors are available for 230/400 V, 50 Hz and 230/460 V, 60 Hz. Variable speed motors are SEW Movimot, 380–500 V. Note that variable speed motors include a control box that adds 120 mm to the width of the motor. IP55 available with standard oil. IP65 available with food grade oil.

Idler unit typesIdler unit is available as Compact version.

Ordering informationDrive units with motors must be specified using the web-based configurator. The configurator provides detailed information and step-by-step guidance in the specifica-tion process. A product code string is generated, contain-ing the specification details. See next page for examples of code strings. Drive units without motors can be ordered using the des-ignations in the catalogue.

Dimension Note that dimensions relating to drive unit motors depend on the motor specified during the configuration.

Size Direct drive, no slip clutch

Drive unit F, V

Drive unit, guided

F, V

28 Drive units – configuration strings © FlexLink 2021

Drive units – configuration strings

Below, two examples of text strings obtained from the configurator with explanations are presented.

Drive unit with fixed speed motor

Drive unit with variable speed motor

Item no - Drive type

A – 0-UnitHNP: Direct drive, no slip clutch....V: Variable speed

B – Motor positionL: LeftR: Right

C – End drive with guided chainG: Guided (position is omitted for non-guided)

D – SpeedV...: Fixed speed... m/minV... -...: Variable speed range...-... m/min

E – GearboxSA37: SEW gear box type SA37WA30: SEW gear box type WA30

F – Movimot sizeMM03: SEW Movimot type, 0,37 kWMM05: SEW Movimot type, 0,55 kWMM07: SEW Movimot type, 0,75 kWMM11: SEW Movimot type, 1,1 kW(position is omitted for fixed speed motors)

G – Electrical environment50/230: 50 Hz, 230 V50/400: 50 Hz, 400 V60/230: 60 Hz, 230 V60/460: 60 Hz, 460 V50/380-500: SEW Movimot variable speed motor

H – Motor power... kW: Motor power, kW(position is omitted for variable speed motorssee position F)

I – Thermal protectionNo: No thermal protectionTF: Thermal protection type TFTH: Thermal protection type TH(position is omitted for variable speed motors)

J – Hybrid cableNo: No hybrid cableC: Hybrid cable included in SEW Movimot(position is omitted for fixed speed motors)

K – FieldbusNo: No fieldbusP: Profibus fieldbus, maintenance switchD: DeviceNet fieldbus, maintenance switch (position is omitted for fixed speed motors)

Item no A B C D E G H IXLEBX A70 HNP - L - G - V4 - SA37 - 50/230 - 0,18kW - TF

Item no A B D E F G J KXLEBX A70 HNPV - L - V6-15 - SA37 - MM03 - 50/380-500 - C - P

XLEBX: End drive

© FlexLink 2021 End drive units 29

PO

X70X

X85X

X180X

X300X

WL222X

WL273X

WL374X

WL526X

WL678X

CSX

GRX

FSTX

TR

APX

IDX

End drive units

End drive unit, direct drive, no slip clutch

End drive unitDirect drive. No slip clutch.Maximum traction force: up to 500 N.Maximum speed 90 m/min for X70X.

Motor on left side:

Fixed/variable speed *Without motor

XLEBX A70XLEBX 0A70HNLP

Motor on right side (not shown):

Fixed/variable speed *Without motor

XLEBX A70XLEBX 0A70HNRP

* Use online configurator when ordering.

Effective track length: 0,70 m

Guide wheel kit

Guide wheel for drive units FLX1003066Including wheel, shaft and mounting hardware. Note. Can only be used with plain chain. For use in high speed operation (60 m/min and above).

End drive unit, guided chain, no slip clutch

End drive unitDirect drive with guided chain. No slip clutch.Maximum traction force: up to 500 N.Maximum speed 90 m/min for X70X.

Motor on left side:

Fixed/variable speed *Without motor

XLEBX A70XLEBX 0A70HNLGP

Motor on right side (not shown):

Fixed/variable speed *Without motor

XLEBX A70XLEBX 0A70HNRGP

* Use online configurator when ordering.

Effective track length: 0,70 m

30 Idler units © FlexLink 2021

Idler units

Bridges, drive unit to idler unit

Idler end unit, Compact

Idler end unit X70X XLEJX A70 SEffective track length: 0,35 m.

82

Bridge, idler compact to drive unit

Bridge (see Note) XLNGX A70 SIncluding roller bridge and mounting hardware.Suitable for connecting idler compact to drive unit.Note! This bridge can only be used with plan chain.

158

© FlexLink 2021 Transfer units 31

PO

X70X

X85X

X180X

X300X

WL222X

WL273X

WL374X

WL526X

WL678X

CSX

GRX

FSTX

TR

APX

IDX

Transfer units

S-Transfer, right

S-transfer for return chain

For optional mounting of Idler end unit or Drive unit at the end (A) or (B) XLCXX A70 DREffective track length: 4,1 m

S-Transfer, left

S-transfer for return chain

For optional mounting of Idler end unit or Drive unit at the end (A) or (B) XLCXX A70 DLEffective track length: 4,1 m

Side transfer, left

Side transfer

For optional mounting of Idler end unit or Drive unit at the end (A) or (B) XLCPX 70 LEffective track length: 3,0 m

A

B

6601393 ±5

140

Support rail on innerbeams included

6601393 ±5

AB 140

beams includedSupport rail on inner

1150

70

350

AB

Side transfer, right

Side transfer

For optional mounting of Idler end unit or Drive unit at the end (A) or (B) XLCPX 70 REffective track length: 3 m

1150

70

350

A

B

32 Wheel bends X70X © FlexLink 2021

Wheel bends X70X

Wheel bend, 30°

Wheel bend, 30° Wheel bend, 30° type C

XLBHX 30A70R153XLBHX 30A70R15C

Effective track length (top + bottom): 0,50 m

Wheel bend, 45°

Wheel bend, 45° Wheel bend, 45° type C

XLBHX 45A70R153XLBHX 45A70R15C

Effective track length (top + bottom): 0,60 m

>160

153

Ø275

80

>160

153

Ø275

80

Wheel bend, 90°

Wheel bend, 90° Wheel bend, 90° type C

XLBHX 90A70R153XLBHX 90A70R15C

Effective track length (top + bottom): 0,85 m

Wheel bend, 180°

Wheel bend, 180° Wheel bend, 180° type C

XLBHX 180A70R153XLBHX 180A70R15C

Effective track length (top + bottom): 1,35 m

>160

153

Ø275

80

153

80

Ø275

© FlexLink 2021 Plain bends 33

PO

X70X

X85X

X180X

X300X

WL222X

WL273X

WL374X

WL526X

WL678X

CSX

GRX

FSTX

TR

APX

IDX

Plain bends

Item no Angle (a) Radius (R) Effective track lengthSlide rails (m)

XLBPX 30A70R5 30° 500 mm 0,70 m (1,40 m 2-way) 2,70 m

XLBPX 30A70R7 30° 700 mm 0,80 m (1,60 m 2-way) 3,10 m

XLBPX 30A70R10 30° 1000 mm 0,92 m (1,85 m 2-way) 3,70 m

XLBPX 45A70R5 45° 500 mm 0,80 m (1,60 m 2-way) 3,20 m

XLBPX 45A70R7 45° 700 mm 0,95 m (1,90 m 2-way) 3,80 m

XLBPX 45A70R10 45° 1000 mm 1,20 m (2,40 m 2-way) 4,70 m

XLBPX 90A70R5 90° 500 mm 1,20 m (2,40 m 2-way) 4,50 m

XLBPX 90A70R7 90° 700 mm 1,50 m (3,0 m 2-way) 5,60 m

XLBPX 90A70R10 90° 1000 mm 2,00 m (4,0 m 2-way) 7,80 m

Plain bend, 30°

Plain bend, 30° X70XR=500 mmR=700 mmR=1000 mm

XLBPX 30A70R5XLBPX 30A70R7XLBPX 30A70R10

Plain bends, 45°

Plain bend, 45° X85XR=500 mmR=700 mmR=1000 mm

XLBPX 45A70R5XLBPX 45A70R7XLBPX 45A70R10

70

R465±530° ±1°

2x 200

Support rail on innerbeam included

2X200

70

R665±5

45°±1°

Support rail on innerbeams included

Plain bend, 90°

Plain bend, 90° X70XR=500 mmR=700 mmR=1000 mm

XLBPX 90A70R5XLBPX 90A70R7XLBPX 90A70R10

Plain bend, 5°-90°

Plain bend, 5-45°±1°R=300-1000±10 mmR=1001-2000±10 mm

Plain bend, 46-90°±1°R=300-1000±10 mmR=1001-1600±10 mm

XLBPX 45A70T10XLBPX 45A70T20

XLBPX 90A70T10XLBPX 90A70T16

Use online configurator when ordering.

2X200

90°±1°

70

R465±5

Support rail on innerbeam included

34 Support rail for plain bends and S-transfer X70X © FlexLink 2021

Support rail for plain bends and S-transfer X70X

Support rail for plain bends and S-transfer(spare part)

Support rail for plain bends and S-transfer,

Length 2,4 m 5048598Fix with sheet metal screw ISO 7049 4,2×9,5 or similar.

16

10,5

Support rail for S-transfer (spare part)

Support rail for S-transfer,Length 2,4 m FLX1003434

Fix with sheet metal screw ISO 7049 4,2×9,5 or similar.

22

7

© FlexLink 2021 Vertical bends 35

PO

X70X

X85X

X180X

X300X

WL222X

WL273X

WL374X

WL526X

WL678X

CSX

GRX

FSTX

TR

APX

IDX

Vertical bends

Vertical bend, positive angle

Vertical bend, pos., 3°Vertical bend, pos., 5°Vertical bend, pos., 15°

XLBVX 3A70R7PXLBVX 5A70R7PXLBVX 15A70R7P

Effective track length (top + bottom): 3°: 0,40 m, 5°: 0,50 m, 15°: 0,75 m

Vertical bend, negative angle

Vertical bend, neg., 3°Vertical bend, neg., 5°Vertical bend, neg.,15°

XLBVX 3A70R7NXLBVX 5A70R7NXLBVX 15A70R7N

Effective track length (top + bottom): 3°: 0,40 m, 5°: 0,50 m, 15°: 0,75 m

80 80°

225R750

5

36 Vertical bends © FlexLink 2021