ST1000-C

ST1000-R-PL

ST1000-B-G

ST1000-G-C

6mm

14m

m

4mm

10mm3

2

1

1. Heavy wall construction of specialmalleable copper alloy.

2. Center hold for 360˚ full,firm connection.

3. Insulator is curved outward to preventshort circuit through casual contact.

Insulator Color

- Frosted (Standard) Leave BlankB - BlueG - GreenR - Red

Rail

ST1000 - Rail Piece, 39-1/4"

Finish

C - Polished ChromeG - 24K Polished GoldPL - Platinum

Example Order: ST1000 - PL

Ordering Information

Specifications/FeaturesTwo square copper alloy tubes bonded to, and separated by, a lightly frosted insulator. While the tubes that make up the system are square, the center hole for connection and feed is round. Inserting round components into the round receptacles assure full connection for superior continuity.

Each rail piece measures 39-1/4" long, and may be cut to any length.

Rails are curvable in both the vertical and horizontal planes to your exact specifications, in the field or customized by Sirius Lighting.

Rail is milled from solid brass and finished in hand-polished chrome, platinum or 24K polished gold plate. In addition to frosted insulators, blue (B), red (R) and green (G) are also available.

Labels/UsageCSA/us Listed

Catalog No.

Type

Project

ST1000sirius® lighting Flexible Track

www.siriuslighting.us CSA/us Listed All specifications subject to change without notice.(727) 240-0230

Sirius Lighting

“SL” Rail Mounted FixturesStandard rail mount that is included with each fixture unless specified. Fixtures may be conveniently mounted anywhere along the rail system up to the maximum capacity of the circuits. Multiple circuits may be created with the use of non-conductive connectors and separate feeds. The rails cULus listed for dry locations only. NEC allows 25 amp capacity for systems under 30V. Rail mount measures 1-7/8" (48mm) in length.12V X 25 amp = 300W load.24V X 25 amp = 600W load.

“SP” Pendant Model for Remote Power SourceThe remote transformer (Choose from 150W to 300W sources) may be used to power up to six (6) 50W fixtures, based on a 12V system. The 3" canopy conceals the Class II wiring and an adapter plate (Model SA54A) may be used to cover a 4” outlet box. Dimensions: 2-15/16" (75mm) W x 7/8" (22mm) H

“SPT” 120V Pendant Serieswith Built-In step-down 60W Electronic Transformer 120/12V in Canopy

Mounts to a standard 4” octagonal electrical box. The electronic transformer has built-in overload and short-circuit protection. Dimensions: 4-5/8" (117mm) W x 1-3/8" (35mm) H

Specifications/FeaturesMany Sirius® Lighting rail fixtures are offered with three different mounting options. They may be rail mounted or connected to a mono-point, with or without a transformer. This versatility allows for unlimited placement possibilities in your design.

All mounting hardware is is milled from solid brass and finished in hand-polished chrome, platinum or 24K gold plate (polished or matte finish). When ordering, use mounting letters as a fixture prefix (i.e. SPT1500 for Nino pendant).

Labels/Usage CSA/us Listed.

Catalog No.

Type

Project

sirius® lighting Fixture Mounting Options

www.siriuslighting.us CSA/us Listed All specifications subject to change without notice.(727) 240-0230

Sirius Lighting