ssv30120 & ssv30120 dwfiles7.design-editor.com/90/9081625/uploadedfiles/e0a... · 2015. 5. 9. ·...
TRANSCRIPT
-
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003779Page 1 REV B 03/11/2009
SSV30120 & SSV30120 DW
SSV30120 Hoist Alum SS V-Frame6243601 Big Wheel - Lift ShoreStation69426 Hardware Box - SSV30/40120 Hoist63401 Lower Frame Bundle - V30/4012063402 Platform Bundle - V30/401206942701 Winch Bundle - Hoist V15/V3065021 Winch Tube Bundle - V30/4012062927 Leg Bundle - V40120HA0024 Motor Stop Bundle Alum 5” V-FrameHA0053 Bunk Poly V30/V40108 / V30/4012069589 Lit Packet, V30120/DW
SSV30120 DW Hoist Alum SS V-Frame6243601 Big Wheel - Lift ShoreStation69426 Hardware Box - SSV30/40120 Hoist63401 Lower Frame Bundle - V30/4012063402 Platform Bundle - V30/401206942701 Winch Bundle - Hoist V15/V3065021 Winch Tube Bundle - V30/4012067227 Leg Bundle - V40120 DWHA0024 Motor Stop Bundle Alum 5” V-FrameHA0053 Bunk Poly V30/V40108 / V30/4012069589 Lit Packet, V30120/DW
SSV30120 Shown in Drawing
-
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003779Page 2 REV B 03/11/2009
-
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003779Page 3 REV B 03/11/2009
-
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003779Page 4 REV B 03/11/2009
-
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003779Page 5 REV B 03/11/2009
-
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003779Page 6 REV B 03/11/2009
-
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003779Page 7 REV B 03/11/2009
Winch Post Guide Post
Lower Frame Assembly
-
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003779Page 8 REV B 03/11/2009
Platform Assembly
-
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003779Page 9 REV B 03/11/2009
Winch Tube Assembly
WINCH TUBE SERVICE INSTRUCTIONS
The winch tube assembly was pre-assembled at the factory. It is important that the internal parts and cable routings are assembled properly in order for the winch tube assembly to function properly. It also requires special tools during the as-sembly process. It is therefore recommended that you con-tact your local dealer should you ever have issues with the winch tube assembly.
-
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003779Page 10 REV B 03/11/2009
Winch Assembly
-
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003779Page 11 REV B 03/11/2009
Wheel Assembly
-
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003779Page 12 REV B 03/11/2009
Bunk Assembly
-
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003779Page 13 REV B 03/11/2009
Motor Stop Assembly
AdjustmentPosition the hoist motor stop assembly on the hoist so it is centered side to side on the hoist platform. Changing the motor stop location front to rear is accomplished by sliding the straight portion of the motor stop arm through the U-bolts. This allows you to change the motor stop location to best position your boat on the hoist. Once the assembly is in the proper position, tighten the nuts on the U-bolts.
-
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003779Page 14 REV B 03/11/2009
DW Leg Assembly (Optional)The deep water version of this boat hoist is assembled using the same assembly instructions as the standard hoist. The only items that are different between the two hoists are the length of the upright corner posts and the adjustable legs in-side them as identified in the drawings for deep water legs.
The water depth where your hoist is going to be installed will determine whether you should use the deep water version of this hoist.
The deep water version of this hoist can be used in deeper water depths because of the additional length of the exten-sion legs. Listed below is the amount of adjustment the vari-ous legs have.
• A standard leg shipped with the hoist has 20” of adjustment.
• The deep water legs have 55” of adjustment.
-
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003779Page 15 REV B 03/11/2009
1/2” x 4” HH Bolt Qty: 1 (0110114)
3/8” x 6” HH Bolt Qty: 4 (0110068)
3/8” x 5-1/2” HH Bolt Qty: 12 (0110066)
3/8” x 3-3/4” HH Bolt Qty: 8 (0110059)
3/8” x 1-1/2” HH Bolt Qty: 13 (0140045)
5/16” x 3/4” HH BoltQty: 16 (0140022)
3/8” x 3/4” Carriage BoltQty: 8 (0210100)
5/8” Brass Hex NutQty: 10 (1410362)
5/8” Flat WasherQty: 6 (1340105)
#7 Hitch Pin ClipQty: 4 (1540300)
5/16” Flat WasherQty: 16 (1310085)
5/16” Lock WasherQty: 16 (1310025)
5/16” Hex NutQty: 16 (1410069)
3/8” Flat WasherQty: 37 (1340095)
3/8” Flange Lock NutQty: 45 (1440101)
1/2” Flange Lock NutQty: 1 (1440102)
1/2” Flat WasherQty: 1 (1340100)
0160054 Pre-Packaged Hardware Bag
-
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003779Page 32 REV B 03/11/2009
SSV30120 Decal Placement
4810700SS Big Wheel Embossed Decal
4850351Warning UP/DOWN Spin Wheel Decal
4811312Clamp Arrow Decal
4811312Clamp Arrow Decal
4811319Adjustable Gauge Decal
4811319Adjustable Gauge Decal
4850363 Safety
Instruction Decal
4850408Not A Step Decal
4850224Caution InspectCable Decal
4850359 Caution
Arrow - Raise Clockwise
Decal
4850206 Lube Tube
Decal
4811503Weight Capacity
Decal
4811503 Maximum Load Decal 4850351 Spinning Wheel Danger Decal4811312 Clamp Arrow Decal4811319 Adj. Gauge Decal4850363 Safety Decal4850408 Not A Step Decal4850206 Lube Tube Decal4850359 Directional Arrow Decal4850224 Inspect Cable Caution Decal4810700 Big Wheel Decal