ssangyong - ecs electronics

1/25

Korando C300Korando e-MotionTivoli X150Tivoli Grand

09/2019 >>01/2022 >>09/2019 >>08/2021 >>

Part No: SY-022-13U

Electric wiring kit for towbars / 13-pin / 12 Volt / ISO 11446

This electric kit has to be installed by a professional workshop or a suitable qualified person.The installation instructions must have been read and fully understood before the start of any installation. Please contact your wiring kit provider or the hotline shown in the footer should you need assistance!Make sure the vehicle is approved/homologated by the manufacturer to tow a trailer! Also please check that there is a definite compatibility between this vehicle and the electric kit!Following the installation of the electric kit, the fitting instructions should be kept together with the vehicle service document and vehicle handbook. The fitting instructions contain important information relating to the use and function of the towing kit as well as for any diagnostic or activation process, that might have to be repeated in the future (e.g. after the performance of a vehicle software update).All warranty claims will be forfeited if the electric kit or components contained therein are used incorrectly or modified. If a towing socket adaptor has been used to connect to the trailer or bike rack, this must be removed from the trailer socket once the trailer or bike rack has been disconnected.If the trailer or bike rack is not equipped with a rear fog lamp, depending on the towing vehicle type, the correct function of the towing kit cannot be guaranteed. In such cases, a rear fog lamp should be retro fitted.This towing electric kit will not be covered under warranty if any technical or electrical modifications or software updates have been performed by the vehicle manufacturer after the initial commissioning of the kit. That applies especially to modifications or updates which may cause malfunctions in the trailer socket or any other part of the trailer electrical equipment!Depending on the type of trailer module used in this electric kit, diagnostic interrogation with the vehicle’s electrical system may be limited or will not function. The error memory inside the trailer module may not be able to be accessed by vehicle manufacturers diagnostic system.Error logs relating to the trailer electrical equipment, that may be generated in the vehicle manufacturers diagnostic system as a result of a test procedure, may be due to the incorrect installation of the towing electric kit or the false activation of the trailer module.We always recommend whenever possible, the following troubleshooting process: An analysis of the vehicle’s error memory and possibly clearing of all faults before the start of the installation! Try disconnecting the trailer module from the towing harness and re-start the fault clearing process! If in doubt, limit the time for troubleshooting to a max of 0,5 hours and call our Technical Support Team!Please follow our instructions carefully and always test the towing electrics using a true lighting board or a specifically designed bulb tester. If an LED tester is used, ensure it is equipped with correct load resistors or malfunctions will occur! This instruction is subject to changes and we reserve the right to make changes to design, colour etc. All of the data and illustrations may not be an exact representation but the text contained in this instruction must be observed!

SSANGYONG

Revision: 3 / 21.04.2022SY-022-13U

ECS Electronics UK20 Speedwell Close Hun�ngtonChester, CH3 6DX

Email-sales: [email protected]: [email protected]

SALE: +44 (0) 7590 564639TECHNICAL: +44 (0) 7440 202052WEB: www.ecs-electronicsuk.co.uk


[email protected]

www.ecs-electronicsuk.co.u

k

2/25

7-15

16-26, 28

27,29-31

3x3x3x 3x

M

X

G

MB

A

L

T

U1

C

X

B

5x

1x 1x

1x 1x

3x2x 10x

20 Amp. LowProf mini

20 Amp. 1x

U2U3Tivoli Only!

20 Amp. micro II

20 Amp. 1x

U2U3Korando Only!

*Optional

1

Revision: 3 / 21.04.2022SY-022-13U




Part No: **-***-***


This electric kit has to be installed by a professional workshop or a suitable qualified person.The installation instructions must have been read and fully understood before the start of any installation. Please contact your wiring kit provider or the hotline shown in the footer should you need assistance!Make sure the vehicle is approved/homologated by the manufacturer to tow a trailer! Also please check that there is a definite compatibility between this vehicle and the electric kit!Following the installation of the electric kit, the fitting instructions should be kept together with the vehicle service document and vehicle handbook. The fitting instructions contain important information relating to the use and function of the towing kit as well as for any diagnostic or activation process, that might have to be repeated in the future (e.g. after the performance of a vehicle software update).All warranty claims will be forfeited if the electric kit or components contained therein are used incorrectly or modified. If a towing socket adaptor has been used to connect to the trailer or bike rack, this must be removed from the trailer socket once the trailer or bike rack has been disconnected.If the trailer or bike rack is not equipped with a rear fog lamp, depending on the towing vehicle type, the correct function of the towing kit cannot be guaranteed. In such cases, a rear fog lamp should be retro fitted.This towing electric kit will not be covered under warranty if any technical or electrical modifications or software updates have been performed by the vehicle manufacturer after the initial commissioning of the kit. That applies especially to modifications or updates which may cause malfunctions in the trailer socket or any other part of the trailer electrical equipment!Depending on the type of trailer module used in this electric kit, diagnostic interrogation with the vehicle’s electrical system may be limited or will not function. The error memory inside the trailer module may not be able to be accessed by vehicle manufacturers diagnostic system.Error logs relating to the trailer electrical equipment, that may be generated in the vehicle manufacturers diagnostic system as a result of a test procedure, may be due to the incorrect installation of the towing electric kit or the false activation of the trailer module.We always recommend whenever possible, the following troubleshooting process: An analysis of the vehicle’s error memory and possibly clearing of all faults before the start of the installation! Try disconnecting the trailer module form the towing harness and re-start the fault clearing process! If in doubt, limit the time for troubleshooting to a max of 0,5 hours and call our Technical Support Team!Please follow our instructions carefully and always test the towing electrics using a true lighting board or a specifically designed bulb tester. If an LED tester is used, ensure it is equipped with correct load resistors or malfunctions will occur! This instruction is subject to changes and we reserve the right to make changes to design, colour etc. All of the data and illustrations may not be an exact representation but the text contained in this instructions must be observed!

Product overview

[email protected]


k

Revision: X / XX.XX.XXXXXX-XXX-XXX




3/25

SYMBOL EXPLANATION

TOOLS

Left (58-L) respectivelyRight (58-R) tail light

Stop light (54) / high mounted, third stop light (54)

Turn signal indicator left

Turn signal indicator right

Rear fog light(s)

Reversing light(s)

Trailer / trailer recognition

Permanent current power supply

Ground or Earth (31)

Ground connection battery terminal lug

Permanent power supply / 13pin socket, chamber 9

Charging wire for trailer battery / 13pin socket, chamber 10

+

15+

+

30+

Positive connection battery terminal lug

54 STOP

L

R

Reverse

B+/30

Fuse / fuse capacity 20 Ampère

Cigarette lighter /accessory socket

Loudspeaker / buzzer

Park Distance Control

Switch / source of function

Connect together

Disconnect

Look at / See further information

Look carefully at selected area

Present / Occupied / OK

Not present / Not occupied / Not OK

Acoustic indication

Attention / important advice

20 Amp.

20 Amp.

12V

ATTENTION! In order to avoid mal-functions and damage to the vehicle’s electrical system the earth terminal must be disconnected from the vehicle’s battery before starting work!

Both the trailer module and the vehicle’s control unit for the electrical system can be damaged during workon the data bus connections if the battery is not disconnected!

Please pay attention to the manufacturer’s instructions when disconnecting and reconnecting the vehicle’s battery!

!Code

3:3

Note: It may be necessaryto check if this vehicle hasa stored radio code beforedisconnecting the battery!

1

ATTENTION! The vehicle's cooling capacity may have to be increased when retrofitting a trailer coupling!You must observe the manufacturer's instructions!!

Co

Co

Revision: 3 / 21.04.2022SY-022-13U




4/25

2

3

Tivoli X150

Korando

12

3

45

12

3

4

5

Tivoli Grand

Revision: 3 / 21.04.2022SY-022-13U




5/25

4

5

1

DISCONNECT

3 2

4

Tivoli X150

Tivoli Grand

Korando

Tivoli X150

Korando

Revision: 3 / 21.04.2022SY-022-13U




6/25

7

6

SEAL WITH SILICONE.

TX

X

1

2

3

Tivoli Grand

Option 1

Tivoli X150

Korando

Revision: 3 / 21.04.2022SY-022-13U




7/25

8

1

2

3

4

SEAL WITH SILICONE.

5

TX

X

Option 2

Tivoli X150

Korando

Remove tape

Revision: 3 / 21.04.2022SY-022-13U




8/25

9

Option 1

Tivoli Grand

SEAL WITH SILICONE.

TX

X

1

2

3

Revision: 3 / 21.04.2022SY-022-13U




9/25

10

1

2

3

4

SEAL WITH SILICONE.

5

TX

X

Option 2

Tivoli Grand

Remove tape

Revision: 3 / 21.04.2022SY-022-13U




10/25

11

Option 1 Option 2

Option 3

X

XX

12

13

14

Option 1

Option 2

15

2 3 41

Option 3 2 3 41

Page 25SOCKET CONNECTION

Revision: 3 / 21.04.2022SY-022-13U




11/25

17

16

Brown

2

3

1

2

3 6

5

4

A

Blue/BlackBlue

1

BrownBrown

Brown

2

3

1

2

3 6

5

4

A

Blue/BlackBlue

1

BrownBrown

Tivoli X150

Korando

Tivoli Grand

Revision: 3 / 21.04.2022SY-022-13U




12/25

19

18

MM

B

B

2x

2 3 4

5 6 7

M

B

1

Korando 3

4

10mm

G

M

B

2

1

Revision: 3 / 21.04.2022SY-022-13U




13/25

21

20

3

4

10mm

G

M

1B

2

Tivoli X150

Tivoli Grand

M

1B 2

3

4

10mm

G

Revision: 3 / 21.04.2022SY-022-13U




14/25

22

!L

L54 STOP

54 STOP

54 STOP

Blue/Red

YellowYellow

1 2

3 4

L

1

2

Blue/Red1cm

L

!L

L54 STOP

54 STOP

54 STOP

Blue/Red

YellowYellow

1 2

3 4

L

1

2

Blue/Red1cm

L

23

Tivoli X150

Korando

Tivoli Grand

Revision: 3 / 21.04.2022SY-022-13U




15/25

24

U1

C

U1

C

25

Revision: 3 / 21.04.2022SY-022-13U




C

C

Black CAN high

Brown/Red

Brown/Red

C

C

Yellow CAN Low

Black/Red

Black/Red

!

1cm

1cmBlack

Yellow

3

C

4 5

CAN-BusJoint-Connector!

!CAN-Data Wire Brown/Red

Black/Red

16/25

26

X

G

MB

A

C

L

T

U1

G A

C

LU1

Black Yellow

1C

Remove tape

2

CANBUSOption 1

Tivoli X150

Korando

Revision: 3 / 21.04.2022SY-022-13U




17/25

27

XT

CANBUSOption 2

C

Yellow CAN Low C

Black/RedBlack/Red C

CBlack CAN high

Brown/RedBrown/Red


Black/Red

Tivoli X150

Korando

Revision: 3 / 21.04.2022SY-022-13U




C

C

Black CAN high

Brown/Red

Brown/Red

C

C

Yellow CAN Low

Black/Red

Black/Red

!

1cm

1cmBlack

Yellow

3

C

4 5

CAN-BusJoint-Connector!


Black/Red

18/25

28

X

G

MB

A

C

L

T

U1

G A

C

LU1

Black Yellow

1C

Remove tape

2

CANBUSOption 1

Tivoli Grand

Revision: 3 / 21.04.2022SY-022-13U




XT

19/25

29

CANBUSOption 2

C

Yellow CAN Low C

Black/RedBlack/Red C

CBlack CAN high

Brown/RedBrown/Red


Black/Red

Tivoli X150

Korando

Revision: 3 / 21.04.2022SY-022-13U




30

20/25

Korando

U2U3

U1RD/BU

2

3

+30

U3

20 Amp. micro II20 Amp.

F32

!Important!

Please do not mountthe fuse tap and its

wiring output inthe otherdirection!

4

1

Revision: 3 / 21.04.2022SY-022-13U




21/25

31

32

20 Amp. 20 Amp.

U3

3

4

U2U3

U1RD/BU

2

+30 !Important!

Please do not mountthe fuse tap and its

wiring output inthe otherdirection!

FS20

Optional

Tivoli X150

Tivoli Grand

Revision: 3 / 21.04.2022SY-022-13U




Extension kitSP-133-ZZ

Consult your supplier.

+

+-15 amp.

15+

PIN 10

PIN 9

+-15 amp.

+30

22/25

36

33

34

35

PARK DISTANCE CONTROL

PARK DISTANCE CONTROL

During trailer operations, the rear park distance control will be deactivated automatically.Due to systemic reasons, an acoustic activation indication will be carried out sporadically!

Optional

! Code3:3

Revision: 3 / 21.04.2022SY-022-13U




Trailer Simulator for 7- and13-pin Sockets

Consult your supplier.

23/25

Revision: 3 / 21.04.2022SY-022-13U




37

38

39

WARNING

OFF

VHz

Hz

Hz

Hz

A

V

COM10A

400mA

mA

V

mV

HOLD MINMAX RANGE

DC

Manual Range 60+

V

Functional test

L 54 STOPR

Reverse

LEDL R

L L L

!

The following light functions for the trailer are not supported by all towing vehicles with DRL circuit:

• Rear lights• Side lights• Numberplate lights

The taillights or dimmed headlightsmust be switched on to activate this function!

part no.

LIGHTMATE IILIGHTMATE III

24/25

40

41

42

13-pin 7-pin

Adapter socketOptional

Revision: 3 / 21.04.2022SY-022-13U




Part No: **-***-***


This electric kit has to be installed by a professional workshop or a suitable qualified person.The installation instructions must have been read and fully understood before the start of any installation. Please contact your wiring kit provider or the hotline shown in the footer should you need assistance!Make sure the vehicle is approved/homologated by the manufacturer to tow a trailer! Also please check that there is a definite compatibility between this vehicle and the electric kit!Following the installation of the electric kit, the fitting instructions should be kept together with the vehicle service document and vehicle handbook. The fitting instructions contain important information relating to the use and function of the towing kit as well as for any diagnostic or activation process, that might have to be repeated in the future (e.g. after the performance of a vehicle software update).All warranty claims will be forfeited if the electric kit or components contained therein are used incorrectly or modified. If a towing socket adaptor has been used to connect to the trailer or bike rack, this must be removed from the trailer socket once the trailer or bike rack has been disconnected.If the trailer or bike rack is not equipped with a rear fog lamp, depending on the towing vehicle type, the correct function of the towing kit cannot be guaranteed. In such cases, a rear fog lamp should be retro fitted.This towing electric kit will not be covered under warranty if any technical or electrical modifications or software updates have been performed by the vehicle manufacturer after the initial commissioning of the kit. That applies especially to modifications or updates which may cause malfunctions in the trailer socket or any other part of the trailer electrical equipment!Depending on the type of trailer module used in this electric kit, diagnostic interrogation with the vehicle’s electrical system may be limited or will not function. The error memory inside the trailer module may not be able to be accessed by vehicle manufacturers diagnostic system.Error logs relating to the trailer electrical equipment, that may be generated in the vehicle manufacturers diagnostic system as a result of a test procedure, may be due to the incorrect installation of the towing electric kit or the false activation of the trailer module.We always recommend whenever possible, the following troubleshooting process: An analysis of the vehicle’s error memory and possibly clearing of all faults before the start of the installation! Try disconnecting the trailer module form the towing harness and re-start the fault clearing process! If in doubt, limit the time for troubleshooting to a max of 0,5 hours and call our Technical Support Team!Please follow our instructions carefully and always test the towing electrics using a true lighting board or a specifically designed bulb tester. If an LED tester is used, ensure it is equipped with correct load resistors or malfunctions will occur! This instruction is subject to changes and we reserve the right to make changes to design, colour etc. All of the data and illustrations may not be an exact representation but the text contained in this instructions must be observed!

Product overview

[email protected]


k

Revision: X / XX.XX.XXXXXX-XXX-XXX




25/25

SOCKET CONNECTION

SOCKET CONNECTION

1-8 STOPReverse 10 9

2x21W21W 21W 42W 3x21W 42W 21W 180W 180W

DIN/ISO 11446

Pmax

YellowColour Blue White Green Brown Red Black Pink Orange Grey White/Black

Blue/Black - White/

Red

1/L 2 2a 3/31 4/R 5/58-R 6/54 7/58-L 8 9 10 11 12 13

+

15++

30+L R

Pink

Orange

BlackYellow

White/Black

White/Red

Blue/Black

Blue

White

Brown

Green

-

RedGrey

1

12 135

67

89

10

112

34

2A

2 4

87

6

3 2A12

11

1

10

9

5

13

Revision: 3 / 21.04.2022SY-022-13U




ssangyong - ecs electronics

Documents