srp-(335-350)-6ma mx en 2019v2 · 2020-05-15 · +5% energy increase1 series connect panels facing...
TRANSCRIPT
SRP-(335-350)-6MA-HV
SRP-DS-EN-2019V2.0 © Copyright 2019 SeraphimOptimized by
Weight
Solar Cells
Frame
Connector
Mechanical Load
Temperature Characteristics
Pmax Temperature Coefficient -0.38 %/°C
Voc Temperature Coefficient -0.28 %/°C(0%/°C at voltage limiting)
Isc Temperature Coefficient +0.05 %/°C
Operating Temperature -40~+85 °C
Nominal Operating Cell Temperature (NOCT) 45±2 °C
Electrical Characteristics(STC)
Maximum Power at STC -Pmp (W)
Power Tolerance(W)
Optimizer Max.Output Voltage (V)
Module Efficiency STC-ηm (%)
Open Circuit Voltage -Voc (V)
Short Circuit Current -Isc (A)
Maximum Power Voltage -Vmp (V)
Maximum Power Current -Imp (A)
Maximum System Voltage (V)
Maximum Series Fuse Rating (A)
SRP-335-6MA-HV
1500
40.9
15
(0,+4.99)
335
46.4
9.23
37.5
8.94
17.14
SRP-350-6MA-HV
350
47.0
9.51
38.1
9.17
17.91
SRP-345-6MA-HV
345
46.8
9.43
37.9
9.11
17.65
SRP-340-6MA-HV
340
46.6
9.32
37.7
9.02
17.40
Module Type
Packing Configuration
Container
Pieces per Pallet
Pallets per Container
Pieces per Container
Mechanical SpecificationsExternal Dimensions
Weight
Solar Cells
Front Glass
Frame
Junction Box
Output Cables
Connector
STC: lrradiance 1000 W/m², module temperature 25°C, AM=1.5NOCT: lrradiance 800 W/m², ambient temperature 20°C, wind speed :1m/sSpecifications are subject to change without further notification.
* All Dimensions in mm* The above drawing is a graphical representation of the product.
20’GP
27
10
270
40’GP
27
22
594
1970 x 992 x 40 mm
22.0 kg
3.2 mm AR coating tempered glass, low iron
Anodized aluminium alloy
IP68
4 mm2 ,cable length:1200 mm
MC4 Compatible
Mono crystalline 6 inch(72pcs)
I
9
14
R4.5
5:1
70 70
7070
II2:1 Section A-A
10:1
04
35
40
CEL
L C
OLO
R L
ABEL
Ø20
SER
IAL
NU
MBE
R
I-V CURVE (MPPT MODE )
I
Mounting holes
Ⅱ
A A
942±1992±1
Grounding holes2×Ø4
positive ( + )negative ( - )
Label
Junction Box
Connector
10
1970
±1
1690
±1
1190
±1
SERIAL NUMBER
SERIAL NUMBER
1970 x 992 x 40 mm
Voltage [V]
Cur
rent
[A]
100
2
4
6
8
10
12
14
1000 W/m² 600 W/m²
800 W/m² 400 W/m²
20 30 40 50
40.9
SRP-(335-350)-6MA-HVSERAPHIM MX 1500V
40’HQ
*27+2 pieces per pallet is the special package which only suits for container transport.For details,please consult SERAPHIM.
27+2*
638
22
Conventional Module or Panel Optimizer Seraphim MX
225W=90W+90W+45W
Conventional
Under any condition, the Seraphim MX can optimize power output to enhance energy harvest. However, conventional modules or panel optimizer product will bypass cell-strings When they underperform. So seraphim MX will give higher energy prodution,eliminate hot-spots issues.
Seraphim MX reduces the shading e�ect signi�cantly, prevents hot-spot formation, and eliminates diode failures. In the meantime, it will lower Operation and Maintenance costs.
Seraphim MX enables �exible PV system design. Best performance with easiest installation.
Combine strings of di�erentlength
i.e. 10 panels in parallel with 12:+5% energy increase1
Series connect panels facing di�erent directions
i.e. 10 East panels in series with West panels:+12% energy increase1
i.e. 10 panels in series with 25panels:+1.6% energy increase1
Comparing with conventional product, Seraphim integrated cell-string level optimizer into solar panel and redesigned the module. Trying best to provide advaced smart solution to customers, and improve performance &reliability of the solar panels.
Bypass Diodes
SERAPHIM MX SERAPHIM MX
WARRANTY
Linear poweroutput warranty
Guarantee on product material and workmanship
10YEARS YEARS
25
MANAGEMENT SYSTEM ISO 9001: Quality management system
Optimized by
Allows 20~35% more modulesper string saving BoS cost
Provide �exibility to system design
Higher power density
Advanced
Enhanced energy harvest Reduced shading e�ect Prevent Hot-spot
Withstand and applicable up to 1500V high system voltage
ISO 14001: Standard for environmental management system
OHSAS 18001: International standard for occupational health and safety assessment system
Conventional Seraphim MX
Conventional Seraphim MX
Conventional Module Seraphim MX
Note: From simulations of PV System in San Jose, CA
175W=90W+90W-5W
Leaf thermal test IEC hot-spot test Nearby Shading, Soiling and inter-row shading
Series connect panels facing di�erent tilts
Three MPPT smart devices optimize each cell-string individually
SRP-(335-350)-6MA-HV
Gua
rant
eed
Pow
er
100%97% 97%
94.28%
90.88%
87.48%
84.08%
80.68%
90%
80%
0 5 10 15 20 25Years
Addtional Value from Linear Warranty