sr130 i sr160 i sr175 i sv185 i sr200 i sr250 i … schranklader/ssl-ctl_range_20077… · skid...
TRANSCRIPT
SKID STEER LOADERS/COMPACT TRACK LOADERS
SR130 I SR160 I SR175 I SV185 I SR200 I SR250 I SV300
TR270 I TR320 I TV380
2
Packaged power since 1969Since the fi rst model 1530 Uni-Loader, Case has built its reputation around power, productivity and reliability. This has been achieved through the introduction of innovative features such as the exclusive Ride Control and side lighting.
SKID STEER LOADERS/COMPACT TRACK LOADERS
SR130 I SR160 I SR175 I SV185 I SR200 I SR250 I SV300
TR270 I TR320 I TV380
3
Extended line-upTo deliver Case performance and productivity to an ever wider range of customers, Case Construction Equipment has expanded its skid steer and compact track loader line-up. The revised range includes fi ve radial lift skid steers (SR models), two radial lift compact track loaders (TR models), two vertical lift skid steers (SV models) and one vertical lift compact track loader (TV model).
Big on power, big on comfortWhatever your job, Case has a skid steer or compact track loader that can handle it. Our new extended line-up of skid steer and compact track loaders delivers:• More power• Increased stability• Greater operator comfort and visibility• Best-in-class serviceability• Wide range of attachments
4
Case power stance delivers maximum stabilityOur Power Stance chassis rides on a 21 percent longer wheelbase, delivering greater stability and comfort and allowing increased lifting capabilities, regardless of jobsite conditions.
CHASSIS SUPPORTS PUSHING POWER!
SKID STEER LOADERS/COMPACT TRACK LOADERS
SR130 I SR160 I SR175 I SV185 I SR200 I SR250 I SV300
TR270 I TR320 I TV380
Best-in-class
breakout forcesThe cylinder geometry optimises the skid steer and compact track loader’s push and pull power, while the bucket support baring directly on the chassis of the machine further adds to its pushing power. With these features, Case skid steer and compact track loaders deliver best-in-class bucket and lift breakout forces.
5
25% wider cabIt’s not just the range that has expanded: all models benefi t from a cab with up to 25% more internal width, providing greatly improved operator comfort. Our cab - the widest in the industry - provides plenty of room for comfortable operation, with greater headroom and legroom, more space between the control levers and easy access to the seat.
Leading operator comfort The wide door, repositioned grab handles and a lower threshold provide easy access to the cab. All models have suspension seats and optional air suspension heated seats for the ultimate in comfort. If specifi ed with full cab glazing and door, the cab is completely sealed to reduce the amount of noise and dust.
6
360-degree visibilityThe 89 cm wide cab together with larger windows and a new ultra-narrow wire side-screen provide outstanding visibility all around the jobsite, allowing safer operation.
Increased productivity and safetyThe larger side windows offer visibility over the tyres and the forward cab design provide a clear line of sight to the cutting edge of the bucket improving both productivity and safety.
SKID STEER LOADERS/COMPACT TRACK LOADERS
SR130 I SR160 I SR175 I SV185 I SR200 I SR250 I SV300
TR270 I TR320 I TV380
7
Controls at your fi ngertipsAll controls are within easy reach and you can choose between standard mechanical
drive levers and electro-hydraulic controls.
EH (Electro-Hydraulic) controls feature multiple speed and sensitivity settings that enable the operator to personalize the machine according to their preferences. The
selection is easily made on the instrument panel’s SETUP menu.
Optional Ride Control provides superior stability and operating speeds, regardless of jobsite conditions.
Optional Self Levelling system keeps the bucket parallel to the ground when the loader arm is raised reducing material spillage and making pallet handling easier.
Switchable Controls
With the electrohydraulic joysticks you can set the control pattern to
match your preferences, switching between ISO- and H-patterns just by
clicking one button.
Unique side lightsWorking longer days even in winter is easy
thanks to the unique Case side lighting system.
8
SR250 / SV300
TR320 / TV380
SKID STEER LOADERS/COMPACT TRACK LOADERS
SR130 I SR160 I SR175 I SV185 I SR200 I SR250 I SV300
TR270 I TR320 I TV380
Tier 4 solutions: more performance & less emissionsCase’s emphasis in product development has been on increasing productivity, improving fuel effi ciency, increasing uptime through best-in-class serviceability and improving operator comfort. And Case has made all of these improvements in an environment-friendly way. Case has applied different technologies for each model:
TIER 4i / STAGE 3A
ISM 49 hp (Naturally aspirated)
TIER 4F / STAGE 3B
ISM 60 hp (Turbo)
TIER 4F / STAGE 3B
ISM 60 hp & 67 hp(Turbo/HPCR)
TIER 4i / STAGE 3A
FPT 74 hp (Turbo)
TIER 4i / STAGE 3B
FPT 90 hp (Turbo/HPCR)y p
SR130 SR160 SV185 / SR175 SR200 / TR270
INTERNAL CEGR
(No Regeneration needed)
DPF + DOC
(Regeneration needed)
DPF + DOC
(Regeneration needed)Electronic engine
DOC ONLY
(No Regeneration needed)
Electronic engine
INTERNAL CEGR
(No Regeneration needed)
• The electronic engine control enhances precision and responsiveness to operator commands.
• Cooled Exhaust Gas Recirculation (CEGR) process is now controlled electronically to achieve greater performance and fuel effi ciency, as well
as even greater reliability - for example, to help protect the engine from overheating
• SR175; SV185; SR250; SV300; TR320 and TV380 are equipped with High Pressure Common Rail (HPCR) technology, which regulates fuel
pressure and injection timing ensuring extremely high injection precision in all engine operating conditions. This results in more torque output
and allows to get more useful power from every drop of fuel.
• Diesel Oxidation Catalyst (DOC) utilizes a chemical process in order to break down pollutants from diesel engines in the exhaust stream, turning
them into less harmful components. DOC does not require regeneration and it is a maintenance-free component.
• Diesel Particulate Filter (DPF) physically traps particulate matter from the engine exhaust.
Electronic controls will trigger an automatic regeneration of the DPF system. Additionally, the system can notify the machine operator to
manually regenerate the DPF system occasionally when the soot load in the DPF exceeds the range defi ned for automatic regeneration.
• CASE customers get the job done faster and get it done right!
Diesel Oxidation Catalyst (DOC)
9
Case Skid Steer and Compact Track Loaders get tougherThe new SR160 takes the lead in its category providing best-in-class peak torque (188 Nm), 19% more hydraulic fl ow and more horsepower than most competitors, while keeping compact dimensions. SR175 boasts a 21% higher peak torque rise at 1800 rpm compared to the previous model, and goes from 60 to 67 gross hp, a 12% increase. Both SR175 and SV185 meet Tier 4 Final (Stage 3B) without using a DPF, just a maintenance-free Diesel Oxidation Catalyst that reduces Particulate Matter emissions for the whole life of the machine. Flow rates for auxiliary hydraulics on the SR175 and SV185 have also been increased to allow operators to run attachments more productively.SR130 has a larger 2.2 liter engine with increased horsepowers and more torque. SR130 together with SR200 and TR270 remain Tier 4 Interim (Stage 3A) with a simple internal CEGR.The SR250, SV300 and the larger Compact Track Loaders (TR320 and TV380) are now Tier 4 Interim (Stage 3B) thanks to the Electronic Control Unit (ECU) that balances fuel, air and re-circulated gases injections into the combustion chamber optimising performance, fuel consumption and emissions.All the technological improvements accross the range allow our machines to work in the same spaces they did before, but perform like models of larger class size, in other words the new range gives customers more value.
SPECIFICATIONS SR150 NEW SR160
Engine capacity 2,0 liter 2,2 liter
Power 52 hp 60 hp
Torque 148 Nm 188 Nm
Emissions level T4i/Stage 3A T4 Final/Stage 3B
Hydraulic fl ow 59 l/min 70 l/min
+15%
+27%
+19%
10
SKID STEER LOADERS/COMPACT TRACK LOADERS
SR130 I SR160 I SR175 I SV185 I SR200 I SR250 I SV300
TR270 I TR320 I TV380
11
Simple and robust undercarriageThe new Case compact track loaders feature a robust undercarriage, engineered to hold fast on steep slopes and take command of muddy or sandy terrain. The undercarriage has a rigid-track frame with fewer moving parts for greater durability and easier maintenance than suspension-track systems.
Heavy-duty drivemotor/fi nal driveIncreases component life byusing an oversized bearing in line with the drive sprocket and elevating the drive assembly, keeping it out of material.
Lifetime sealed and oil lubricated rollers and idlersDuo-cone face seals utilize proven dozer oil-lubrication technology that provides greater reliability and lower maintenance costs.The seals reduce the possibility of material and moisture getting into the rollers and idlers.
Triple fl ange rollersHelps prevent de-tracking on inclines by using dozer-style rollers with a larger inner-diameter fl ange positioned between the track lugs.
Simple hydraulic track adjustmentTrack tension is simply adjusted by adding or removing grease to a hydraulic cylinder. Track tension is important to undercarriage life and track life.
1212
SKID STEER LOADERS/COMPACT TRACK LOADERS
SR130 I SR160 I SR175 I SV185 I SR200 I SR250 I SV300
TR270 I TR320 I TV380
Convenient cab tiltingWith just two retaining bolts, the cab is easy to tilt, providing access to hydraulic and transmission components when necessary. A safety locking system that prevents the cab from dropping is automatically activated.
Best-in-class serviceabilityEasy access, daily service points grouped together and remote mounted fi lters mean it’s easy to keep Case skid steer and compact track loaders working to their maximum effi ciency.
Smart battery and drain hoses accessBattery and environmental drain hoses are easily accessible from the side of the machine, by removing a tap located behind the rear wheel, allowing quick service and fast maintenance activities.
13
SiteWatch: Centralised Fleet Control Benefi ts At Your Fingertips
Measure your true asset availability and optimise it
• Eliminate the “phantom fl eet”: SiteWatch allows to identify spare units or under loaded machines on each site.
• Become able to reallocate units where they are more needed.• Forward Maintenance Planning is easier since the actualised working
hours are always available.• Extend the benefi ts of SiteWatch to the rest of your fl eet: SiteWatch can be
installed on the units of other brands as well.
Challenge your Total Cost of Ownership!
• Being able to compare the fuel usage of different machine types will allow you choose the right equipment.
• Save on transport costs with planned and grouped maintenance tasks.• Peace of mind, optimised uptime and lower repair costs:
with preventive maintenance you can for example be alerted if the engine needs to be serviced and avoid a disruptive breakdown.
• Be able to compare your asset Return On Investment on different sites.• Your equipment is used only during working hours. You can set up alerts
so that you know if it is in use during the weekend or at night.• Integrate with the programmed maintenance package, so that you can be
sure every machine is at the right place at the right time.
More Safety, Lower Insurance Premium
• Keep thieves away: dissuade them from attacking your asset because it is geo-localised. SiteWatch is hidden so that thieves can’t fi nd it quickly.
• Your fl eet is used only where you decide. You can defi ne a virtual fence and receive an email when a machine exits that perimeter.
The Science BitThe Case SiteWatch telematics system uses a high-tech control unit mounted on each machine to collate information from that machine and from GPS satellites. This data is then sent wirelessly through the mobile communication networks to the Case Telematics Web Portal.
TELEMATICS
14
An attachment for every jobCase skid steer loaders can handle a broad range of attachments, providing outstanding versatility to serve a broad range of industries.
Connect Under Pressure (CUP)The CUP standard feature allows you to connect tool hoses without a wrench.
Handle attachments easily!Hydraulic Coupler Option: An optional hydraulic attachment coupler increases both operator comfort and uptime on the job site since attachments can be exchanged quickly and safely without leaving the cab.This option is now available for every model within range.
SKID STEER LOADERS/COMPACT TRACK LOADERS
SR130 I SR160 I SR175 I SV185 I SR200 I SR250 I SV300
TR270 I TR320 I TV380
15
ASPHALT FLOATWHEEL COMPACTOR WHEEL EXCAVATOR
COMPACTION ROLLER CEMENT MIXER BACKHOE
PLANER BROOM BUCKET
16
SKID STEER LOADERS/COMPACT TRACK LOADERS
SR130 I SR160 I SR175 I SV185 I SR200 I SR250 I SV300
TR270 I TR320 I TV380
AUGERPALLET FORK HAMMER
HIGH TIP BUCKET WIDE RANGE OF BUCKETS4X1 MULTIPURPOSE BUCKET
FORK & GRAPPLE BALE SPIKEFARM FORK
17
Attachment Application Width (mm)
Depht (mm)
Weight (kg)
Flow Compatible Model
Wheel Excavator Trenching jobs on hard, compact materials like asphalt and concrete,
digging trenches on roads or in areas where movement is restricted.
Wheel width
130
130
150 - 450
200 - 600
1.155
1.260
High
High
SR200 and bigger
SR175 / SV185 /
SR200
Wheel Compactor Compacting the bed of a trench before adding an asphalt surface layer. Wheel width
200 - 250
- 300 350
- 400
0 - 750 550 Std SR200 and bigger
Asphalt Float Backfi lling of trenches and widening road surface while maintaining the
road’s original gradient.
1900 N.A. 620 Std SR175 and bigger
Planer Planing on asphalt or concrete.
Overlaying road, industrial and courtyard surfaces.
Maintenance of stretches of road.
Restoration of damaged, bumpy or worn surfaces.
350
450
600
1.000
0 - 110
0 - 150
0 - 170
0 - 130
590
790
950
1.090
Std
High
High
High
SR175 and bigger
SR175 / SV185 /
SR200
SR200 and bigger
SR200 and bigger
Broom Bucket Clearing yards, roads, footpaths, etc. Also effi cient for snow clearance. 1.525
1.680
1.850
2.080
225
278
460
522
SR130 / SR160
SR175 / SV185 /
SR200
SR175 / SV185 /
SR200 SR250 / SV300
SR250 / SV300
Backhoe Creation of trenches, foundations, drain and irrigation channels, etc. in
private or public constructions, both for new or maintenance jobs
1.500
1.500
1.500
2.275
3.000
3.500
700
790
860
Std
Std
Std
SR200 and smaller
SR175 and bigger
SR250 / SV300
Cement Mixer Production of cement for civil construction in isolated or diffi cult-to-access
areas, or with limited availability of electric energy
1.250
1.500
1.660
1.700
200
300
350
400
280
300
380
450
Std
Std
Std
Std
SR130; SR160
SR175 and bigger
SR200 and bigger
SR250 and bigger
Compaction Roller Ground preparation through compaction of earth, gravel, sand, etc. 1100 N.A. 787 Std All
Pallet Fork Handling of palletizes loads. Forks length
1.000
1.100
1.200
160
164
168
SR200 and smaller
SR200 and smaller
All
Hammer Concrete demolition jobs, trenching and general excavation work 160
210
275
370
505
Std
Std
Std
High
High
SR130 / SR160
SR130 / SR160
SR175 and bigger
SR250 / SV300
SR250 / SV300
Auger (std fl ow) Auger (high fl ow)
Boring of holes in the ground such as telegraph poles, electricity pylons,
signposts, metallic frame pillars, tree and shrub planting
760
900
1.200
1.200
20 - 175
30 - 225
Std
High
All
SR175 ang bigger with
High Flow
Farm Fork General farm yard applications 1.525
1.680
1.850
2.080
153
170
185
242
SR130; SR160
SR175 / SV185 /
SR200
SR175 / SV185 /
SR200/ SR250 / SV300
SR250 / SV300
Fork & Grapple “Mucking out” bale and silage handling. Also suitable for industrial
applications
1.525
1.680
1.850
2.080
250
260
310
380
SR130; SR160
SR175 / SV185 /
SR200
SR175 / SV185 /
SR200 SR250 / SV300
SR250 / SV300
Bale Spike Handling of round bales 980 79 All
High Tip Bucket Increase dump height by 800 to 1.200 mm 1.525
1.680
1.850
2.080
364
285
352
496
SR130 / SR160
SR175 / SV185 /
SR200
SR175 / SV185 /
SR200 SR250 / SV300
SR250 / SV300
4X1 Multipurpose Bucket
Applications as conventional bucket, grab for back fi lling or as a dozer 1.525
1.680
1.850
2.080
253
283
340
435
SR130 / SR160
SR175 / SV185 /
SR200
SR175 / SV185 /
SR200 SR250 / SV300
SR250 / SV300
Wide range of Buckets (Dirt&Foundry; Low
Profi le; Low Profi le
Extended, Heavy
Duty, Manure/Slurry;
Light Material)
Digging, excavating, grading, material handling 1.525
1.680
1.830
1.850
2.080
SR130 / SR160
SR175 / SV185 / SR200
SR175 / SV185 / SR200
SR250 / SV300
SR250 / SV300
B
K L
H
E
A
I
J
G
FC
D
General dimensions
Specifi cations
SR130 SR160 SR175 SV185 SR200
A - Height to Bucket Hinge Pin 2.845 mm 2.845 mm 3.099 mm 3.048 mm 3.124 mm
B - Height to Top of ROPS 1.919 mm 1.919 mm 1.974 mm 1.974 mm 1.998 mm
C - Length without attachment 2.435 mm 2.435 mm 2.685 mm 2.710 mm 2.669 mm
D - Length with bucket * 3.028 mm 3.028 mm 3.305 mm 3.345 mm 3.292 mm
E - Overall Width 1.518 mm 1.518 mm 1.678 mm 1.678 mm 1.755 mm
F - Wheelbase 941 mm 941 mm 1.128 mm 1.128 mm 1.128 mm
G - Ground Clearance 178 mm 178 mm 178 mm 178 mm 203 mm
H - Dump height * 2.246 mm 2.246 mm 2.470 mm 2.377 mm 2.495 mm
I - Dump Angle 40° 40° 40° 52° 40°
J - Dump Reach @ Max Height 469 mm 469 mm 542 mm 783 mm 517 mm
K - Angle of Departure 22° 22° 23° 23° 25°
L - Rollback Angle (Bucket on Ground) 26° 26° 32° 35° 31°
SR130 SR160 SR175 SV185 SR200
FRAME SIZE Small Frame Small Frame Medium Frame Medium Frame Medium Frame
EMISSIONS LEVEL Tier 4i / Stage 3A Tier 4F / Stage 3B Tier 4F / Stage 3B Tier 4F / Stage 3B Tier 4i / Stage 3A
PERFORMANCE SPECS
Rated Operating Capacity 50% 590 kg 725 kg 790 kg 840 kg 905 kg
ROC with counterweights 50% 635 kg 770 kg 835 kg 885 kg 950 kg
Tipping Load 1.179 kg 1.455 kg 1.588 kg 1.678 kg 1.814 kg
Lift Cylinder Breakout Force** 13.0 kN 15.0 kN 17.0 kN 15.3 kN 20.3 kN
Bucket Cylinder Breakout Force** 19.0 kN 23.4 kN 32.3 kN 24.7 kN 32.3 kN
ENGINE
Engine Make - Model ISM N844L-D
(Nat. Asp.)
ISM N844LT-F
(Turbo)
ISM N844LTA-DI-F
(Turbo)
ISM N844LTA-DI-F
(Turbo)
FPT F5C
(Turbo)
Displacement 2,2 l 2,2 l 2,2 l 2,2 l 3,2 l
Horsepower 49 hp
@ 2.800 rpm
60 hp
@ 2.800 rpm
67 hp
@ 2.800 rpm
60 hp
@ 2.900 rpm
74 hp
@ 2.500rpm
Peak torque 143 Nm
@ 1.800 rpm
188 Nm
@ 1.800 rpm
208 Nm
@ 1.800 rpm
183 Nm
@ 1.800 rpm
275 Nm
@ 1.400 rpm
TRAVEL SPEED
Low Range 12.7 km/h 11.9 km/h 11.9 km/h 11.9 km/h 11.6 km/h
High Range (Optional) NA NA 18.5 km/h 18.5 km/h 19.2 km/h
HYDRAULIC SYSTEM
Pump fl ow 59 LPM 70 LPM 78 LPM 78 LPM 85 LPM
Optional high fl ow N/A N/A 116 LPM 116 LPM 116 LPM
Relief Pressure 210 bar 210 bar 210 bar 210 bar 210 bar
WEIGHTS
Operating Weight 2.300 kg 2.505 kg 2.842 kg 2.980 kg 3.130 kg
Shipping Weight 2.160 kg 2. 370 kg 2.705 kg 2.840 kg 2.995 kg
SERVICE CAPACITY
Fuel Tank 60.5 l 60.5 l 75.5 l 75.5 l 75.5 l
* With D&F Bucket
** Breakout forces estimated considering both tip and hydraulic limits.
19
BE
K
C
D
L
H A
I
J
SR250 SV300 TR270 TR320 TV380
FRAME SIZE Large Frame Large Frame Medium Frame Large Frame Large Frame
EMISSIONS LEVEL Tier 4i / Stage 3B Tier 4i / Stage 3B Tier 4i / Stage 3A Tier 4i / Stage 3B Tier 4i / Stage 3B
PERFORMANCE SPECS
Rated Operating Capacity 50% 1.135 kg 1.360 kg 50%: 1.225 35%: 859 50%: 1.451 35%: 1.018 50%: 1.723 35%: 1.209
ROC with counterweights 50% 1.225 kg 1.450 kg 50%: 1.280 35%: 914 50%: 1.676 35%: 1.203 50%: 1.948 35%: 1.394
Tipping Load 2.268 kg 2.722 kg 2.449 kg 2.902 kg 3.447 kg
Lift Cylinder Breakout Force** 25.3 kN 24.9 kN 27.8 kN 34.5 kN 26.8 kN
Bucket Cylinder Breakout Force** 33.3 kN 33.7 kN 32.3 kN 38.7 kN 33.4 kN
ENGINE
Engine Make - Model FPT F5H
(Turbo)
FPT F5H
(Turbo)
FPT F5C
(Turbo)
FPT F5H
(Turbo)
FPT F5H
(Turbo)
Displacement 3.4 l 3.4 l 3.2 l 3.4 l 3.4 l
Horsepower 90 hp
@ 2.500 rpm
90 hp
@ 2.500 rpm
74 hp
@ 2.500rpm
90 hp
@ 2.500 rpm
90 hp
@ 2.500 rpm
Peak torque 383 Nm
@ 1.400 rpm
383 Nm
@ 1.400 rpm
275 Nm
@ 1.400 rpm
383 Nm
@ 1.400 rpm
383 Nm
@ 1.400 rpm
TRAVEL SPEED
Low Range 11.3 km/h 11.3 km/h 9.3 km/h 8.2 km/h 8.2 km/h
High Range (Optional) 18.5 km/h 18.5 km/h 13.4 km/h 12.2 km/h 12.2 km/h
HYDRAULIC SYSTEM
Pump fl ow 92 LPM 92 LPM 85 LPM 92 LPM 92 LPM
Optional high fl ow 143 LPM 143 LPM 116 LPM 143 LPM 143 LPM
Relief Pressure 210 bar 210 bar 210 bar 210 bar 210 bar
WEIGHTS
Operating Weight 3.490 kg 3.765 kg 3.720 kg 4.355 kg 4.625 kg
Shipping Weight 3.340 kg 3.610 kg 3.585 kg 4.200 kg 4.475 kg
SERVICE CAPACITY
Fuel Tank 96.5 l 96.5 l 75.5 l 96.5 l 96.5 l
SR250 SV300 TR270 TR320 TV380
A - Height to Bucket Hinge Pin 3.175 mm 3.302 mm 3.124 mm 3.215 mm 3.342 mm
B - Height to Top of ROPS 2.002 mm 2.002 mm 1.998 mm 2.043 mm 2.043 mm
C - Length without attachment 2.981 mm 2.990 mm 2.669 mm 2.981 mm 2.990 mm
D - Length with bucket * 3.611 mm 3.604 mm 3.292 mm 3.611 mm 3.604 mm
E - Overall Width 1.768 mm 1.768 mm 1.676 mm 1.930 mm 1.930 mm
F - Wheelbase 1.322 mm 1.322 mm NA NA NA
G - Ground Clearance 203 mm 203 mm 203 mm 243 mm 243 mm
H - Dump height * 2.558 mm 2.615 mm 2.495 mm 2.602 mm 2.669 mm
I - Dump Angle 38° 54° 40° 38° 54°
J - Dump Reach @ Max Height 575 mm 744 mm 568 mm 548 mm 798 mm
K - Angle of Departure 24° 24° 32° 32° 32°
L - Rollback Angle (Bucket on Ground) 31° 35° 31° 30° 34°
** Breakout forces estimated considering both tip and hydraulic limits.
* With D&F Bucket
Worldwide Case ConstructionEquipment Contact Information
EUROPE:via Plava, 8010135 TORINO - ITALIA
AFRICA/MIDDLE EAST/CIS:Riva Paradiso 146902 Paradiso - SWITZERLAND
NORTH AMERICA/MEXICO:700 State StreetRacine, WI 53404 U.S.A.
LATIN AMERICA:Av. General David Sarnoff 223732210 - 900 Contagem - MGBelo Horizonte BRAZIL
ASIA PACIFIC:Unit 1 - 1 Foundation Place - ProspectNew South Wales - 2148 AUSTRALIA
CHINA:No. 29, Industrial Premises, No. 376.De Bao Road, Waigaoqiao Ftz, Pudong, SHANGHAI, 200131, P.R.C.
CustomerAssistance
00800-2273-7373
www.casece.com
, , Form
No.
20
07
7G
B -
Pri
nte
d in
Ital
y -
Med
iaC
ross
Fir
enze
- 0
4/1
4
The call is free from a land line. Check in advance with your Mobile Operator if you will be charged.
NOTE: Standard and optional fi ttings can vary according to the demands and specifi c regulations of each country. The illustrations may include optional rather than standard fi ttings - consult your Case dealer. Furthermore, CNH Industrial reserves the right to modify machine specifi cations without incurring any obligation relating to such changes.
Conforms to directive 98/37/CE
Tyre optionsFUNCTIONAL VARIANTE
TYRE DESCRIPTION SR130 SR160 SR175 SV185 SR200 SR250 SV300
8501207 10X16.5 Heavy Duty 59OTW x x
8501307 10X16.5 Premium 59OTW x x
8501407 10X16.5 Premium Liner 59OTW x x
8501507 27X10.5-15 Premium 64OTW x x
8502107 10X16.5 Non-Pneumatic 64OTW x x x x x
8501707 10X16.5 Heavy Duty 64OTW x x x
8501807 10X16.5 Premium 64OTW x x x
8501907 10X16.5 Premium Liner 64OTW x x x
8502007 10X16.5 Severe Duty 64OTW x x x
8503107 12X16.5 Heavy Duty 70OTW x x x x x
8503207 12X16.5 Premium 70OTW x x x x x
8503307 12X16.5 Premium Liner 70OTW x x x x x
8503407 12X16.5 Severe Duty 70OTW x x x
8503507 12X16.5 Mining 70OTW x x x
8503607 12X16.5 Non-Pneumatic 70OTW x x x
8505007 33X15.5 Flotation 76OTW x x x
8505107 14X17.5 Premium 76OTW x x
HEAVY DUTY PREMIUM & PREMIUM W/LINER
SEVERE DUTY NON-PNEUMATIC MINING FLOTATION
CASE Construction Equipment CNH UK Ltd Unit 4, Hayfi eld Lane Business Park, Field Lane, Auckley, Doncaster, DN9 3FL Tel. 00800-2273-7373 Fax +44 1302 802829