spw500 thermal framing 00 product assembly manual 2012 ... spw50… · glazing note: all glazing...
TRANSCRIPT
Introduction The Company Senior Architectural Systems Ltd are a group of companies based in the United Kingdom who operate through a network of regional Service Centres. Its' operations include the main business of stockholding in both systemized and standard aluminium extrusions. Mill finish, anodised (natural and bronze), and powder coated sections are all available, along with all of the necessary accessories for manufacture. The incorporation of new or modified sections, system compatible, is carried out when required. The emphasis is on service to our clients, with response speed being very much of the essence. Deliveries are made on dedicated vehicles in our own livery, into all areas of the country on a regular basis - collections can be easily arranged for direct release (ex. works) to our clients' instructions. Short notice collections can also be arranged in the event of the occasional, and inevitable 'emergency'.
The Product Range Other product ranges available from Senior Architectural Systems include: -
Curtain Wall, Casement Windows, Mid-Rise Commercial Windows, Patent Glazing, Sub Frame, Standard Angles and Rectangular Tubes, Residential Windows, Residential Doors, Patio Doors and Secondary Glazing.
Quality Assurance We are committed to the aims of ISO 9001 Quality Assurance. In the event of questions or queries concerning the contents of this manual or any other product on offer from Senior Architectural Systems, please do not hesitate to contact your Regional Service Centre:
Senior Architectural Systems Denaby (Head Office) 01709 772600
Senior Architectural Systems Scotland 01506 407640
Senior Architectural Systems South 01633 277880 Senior Architectural Systems Ltd operate a policy of continuing development and reserve the right to amend and improve their products without notification. Every effort will however be made to ensure that up-dates are circulated to our clients for information as deemed necessary.
All items contained in this manual are subject to our normal terms and conditions, a copy of which is available on request. Whilst we make every effort to ensure the accuracy of the drawings and measurements contained in this manual, we neither warrant nor guarantee the accuracy and you should undertake your own measurements and not place any reliance on or act in consequence of the contents herein.
SPW500 Thermal Framing SPW.500.ii 01.12
Scope This specification covers the materials, sections and accessories generally available from stock through the Senior Architectural Systems group of companies. It illustrates typical recommendations for the fabrication of our SPW500 series Thermal Framing. The sections and fittings described in this manual are not definitive or exclusive in application but show typical assemblies using standard materials and accessories. Identical main line extrusions are used for both single and dual colour finishes. These details are suitable for installations in both new buildings and re-furbishments, which should comply with the latest building regulations.
Construction SPW500 Thermal Framing are fabricated from square cut components, mechanically jointed, using self tapping screws into special cleats and tie bars for compressive strength. A proprietary sealant to protect against water entry should be used on all metal-to-metal joints and cleat insertion points at assembly. Glazing is double glazing 28mm standard. At all times good working practices should be employed.
Accessories All accessories shown in this manual are deemed to be both typical, and suitable for, the installations intended. They are generally standard items, which carry with them the manufacturers guarantees and are components that are held in stock.
Testing The SPW500 Series Door is tested in accordance
with BS6375 Part 1, 2009, Exposure Cat 800U.
Air Permeability 150Pa (Class 1 ) Water Tightness 0Pa (Class 0 ) Wind Resistance 800Pa (Class A2 )
Separate figures are available for Thermal U-values depending on type of frame and glazing material. SPW500 Series Door has been security tested in accordance with PAS-23/24.
Materials Extruded aluminium is Aluminium Alloy 6063.T6 to BS EN 755 part9: 2001 Polyamide thermal barriers PA66 GF25 Anodising: i) Natural (Silver) anodised to BS3987, 1991. and ii) Anolok Bronze Colour 547 anodised to BS3987, 1991. Anodising is to a minimum of 25 microns (AA25). Powder Coating is to BS6496, 1984. Gasketry is manufactured in accordance with BS3734.
Glazing Note: All Glazing should be carried out to the recommendations of B.S.6262. Double glazing to 28mm may be installed into this framing system. Glazing is achieved by removal of the snap-in beads. Setting blocks should be located in accordance with recommendations from the relevant standards or industry associates. The door glass is also held in place by a combination of captive and wedge gaskets.
Site Installation Site fixing of finished frames should take into account all applicable standards with regard to both the method employed and safe working practices. Frame fixings should be suitable for the purpose given site conditions and materials into which the installation is to be made. If in doubt, please check with your fixings supplier regarding type and method to be used.
Size Limitations Size limitations for each type of door vary. The following schedule is an indication of the SPW500 system capabilities.
W x H Single Door 1000 x 2300 Double Door 2000 x 2300 Due consideration to weight and hardware capabilities should be given..
SPW500.1.iii 01.12
SPW500 Thermal Framing
Index
Description Detail Page. Last Issue Date Front Cover SPW500.1.i 01.12 Introduction SPW500.1.ii 01.12 Specification SPW500.1.iii 01.12 Index SPW500.1.iv 09.18 Index SPW500.1.v 09.18 Section Identification SPW500.1.vi 09.18 Section Identification SPW500.1.vii 01.12 Manual Update SPW500.1.MU.i 09.18 SPW500.1.MU.ii08.12 A - General Arrangements General Arrangements G.A. Door Stiles SPW500.A.01 01.12 General Arrangements G.A. Deep Door Stiles SPW500.A.02 01.12 General Arrangements G.A. AFT Door Stiles SPW500.A.03 01.12 General Arrangements G.A. Door Top, Bottom And Midrails SPW500.A.04 01.12 General Arrangements G.A. Bottom Rails And Thresholds SPW500.A.05 01.12 General Arrangements G.A. Deep Bottom Rails And Thresholds SPW500.A.06 01.12 General Arrangements G.A. Door Header Bars SPW500.A.07 01.12 General Arrangements G.A. Mullions/Transoms SPW500.A.08 01.12 General Arrangements Shuffle Glaze Transom/Mullion SPW500.A.09 01.12 General Arrangements Blank SPW500.A.10 01.12 General Arrangements Cill SPW500.A.11 05.18 General Arrangements Head SPW500.A.12 01.12 General Arrangements G.A. Door Into Hybrid C/Wall SPW500.A.13 01.12 General Arrangements G.A. Door Into Hybrid C/Wall SPW500.A.14 01.12 General Arrangements G.A. Door Into C/WAll SPW500.A.15 01.12 General Arrangements G.A. Door into C/Wall AFT SPW500.A.16 01.12 General Arrangements Corner Posts SPW500.A.17 01.12 General Arrangements Blank SPW500.A.18 01.12 B - Section Identification Full Size Sections Door Stiles SPW500.B.101 01.12 Full Size Sections AFT Door Stiles SPW500.B.102 01.12 Full Size Sections Top And Bottom Rail SPW500.B.103 01.12 Full Size Sections Deep Bottom Rail SPW500.B.104 01.12 Full Size Sections Midrail, Bead, Door Stop & Drip Bar SPW500.B.105 09.18 Full Size Sections Deep Midrail SPW500.B.106 01.12 Full Size Sections Jamb Trims, Rail Cleat And Brush Seal Carrier SPW500.B.107 01.12 Full Size Sections Pad Handles SPW500.B.108 01.12 Full Size Sections Framing/Transom/Mullion SPW500.B.201 01.12 Full Size Sections Shuffle Glaze Transom And Mullion SPW500.B.202 01.12 Full Size Sections Header Bar And Universal Frame SPW500.B.203 01.12 Full Size Sections Bead, Jamb Closer, Infil Etc SPW500.B.204 01.12 Full Size Sections Door thresholds SPW500.B.205 01.12 Full Size Sections Corner Posts SPW500.B.206 01.12 Full Size Sections Cill SPW500.B.207 05.18 Full Size Sections Blank SPW500.B.208 01.12 C - Accessory Components Accessories Closers And Bracketry SPW500.C.01 01.12 Accessories PAS24 Accessories SPW500.C.02 01.12 Accessories Locks And fittings SPW500.C.03 01.12 Accessories Letter Plates And Packs SPW500.C.04 01.12 Accessories Cleats And Fixings SPW500.C.05 01.12 Accessories Pad Handles SPW500.C.06 01.12 Accessories Gaskets, Brush Pile & Tape SPW500.C.07 09.18 Accessories Blank SPW500.C.08 01.12
SPW500 Thermal Framing SPW500.1.iv 09.18
Index Description Product Page Last Issue Date D - Deductions Deductions Narrow And Wide Stiles SPW500.D.101 01.12 Deductions Anti-Finger Trap Stiles SPW500.D.102 01.12 Deductions Top And Bottom Rails SPW500.D.103 01.12 Deductions Mid Rails SPW500.D.104 01.12 Deductions Framing SPW500.D.201 01.12 Deductions Framing SPW500.D.202 01.12 Deductions Frame Drilling Details SPW500.D.203 01.12 Cutting Details Frame Cut-out Details SPW500.D.204 01.12 Cutting Details Frame Cut-out Details SPW500.D.205 01.12 Cutting Details Threshold Cut-out Details SPW500.D.206 01.12 Drainage Framing SPW500.D.207 05.18 Deductions Bottom Rail Drip Bar SPW500.D.208 09.18
E- Preparation Details Preparation Security Lock Detail SPW500.E.01 01.12 Preparation Lock Detail SPW500.E.02 01.12 Preparation Top Rail For Standard Stile SPW500.E.03 01.12 Preparation Bottom Rail For Standard Stiles SPW500.E.04 01.12 Preparation AFT Stile Bottom Pivot SPW500.E.05 01.12 Preparation Top Rail AFT Stiles SPW500.E.06 06.13 Preparation Bottom Rails For AFT Stiles SPW500.E.07 01.12 Preparation Typical lock Stiles SPW500.E.08 01.12 Preparation Cleat For Midrail And SLP2 Letter Plate SPW500.E.09 01.12 Preparation Flush Bolts SPW500.E.10 01.12 Preparation Header SPW500.E.11 05.12 Preparation Header With Fan Light SPW500.E.12 05.12 Preparation Face Plate Into Meeting Stile SPW500.E.13 08.12 Preparation Door stop for Single Action Doors SPW500.E.14 01.12 Preparation Lock Jamb SPW500.E.15 01.12 Preparation Lock Jamb Using Shuffle Glaze Section SPW500.E.16 01.12 Preparation Cruciform Joint Frame SPW500.E.17 01.12 Preparation Transom Joint Using Screw Fixings SPW500.E.18 01.12 Preparation Transom Joint Using SPW5CA SPW500.E.19 01.12 Preparation Header Connection SPW500.E.20 01.12 Preparation Shuffle Glazed Joint SPW500.E.21 10.14 Preparation Door Midrail Into Framing SPW500.E.22 01.12 Preparation 135 Degree Corner Post SPW500.E.23 01.12 Preparation 90 Degree Corner Post SPW500.E.24 01.12 Preparation Coupling Detail SPW500.E.25 01.12 Preparation Thermal Frame Fixing Detail SPW500.E.26 01.12 Preparation SPW52828 Fixing SPW500.E.27 09.18 Preparation Assembly For Bottom Rail Drip Bar SPW500.E.28 09.18 F- Glazing Glazing Shuffle Glazing SPW500.F.01 01.12
SPW500.1.v 09.18
SPW500 Thermal Framing
SPW500 Thermal Framing Section Identification
SPWSOO.vii
Ewss:J Thermal Header Bar
SPW55051 Thermal frame
SPW55050 Universal Thermal Frame
SPW55253 Deep Thermal Frame
SPW55054 Thermal Transom/Mullion
SPW56654 Thermal Transom/Mullion
SPW56767 Thermal Transom/Mullion
n SPW556 28mm Bead
0 SPW557
Door Jamb Closer
n SPW5JI
PVC Jamb In-Fill
~
SPW5JISG PVC Jamb In-Fill For Shuffle Glaze
r
SRA021 PVC Back Plate
{ [ ~ SFG118
SubCill
:P J SPW343570
Drainage Gill
05.18
SPWS00.A.01 01.12
SPW500 Thermal Framing General Arrangement - Door Stiles
131.5
55 70
SPW55253 CTR Pivot (If Applicable)
52.5 19 SPW51415
, 0 SRA021 0 ~
57.5 14
SPW557 © Hinge Stile
131.5
55 70 CTR Pivot (If Applicable)
SPW56767
52.5 19 SPW51415
, 0 ,.._ ~
C')
57.5 14
@ 148
57.5 57.5
5
@ Meeting Stile
Note: Use SPW52122 Wide Lock Stile When Fitting Concealed Panic Bars
Half Full Size
SPW500 Thermal Framing SPWS00.A.02 General Arrangement - Deep Door Stiles
14
0 0
35
5
SPW55051
150
101 14
91
SPW52122
+
-----~7o ______ @ Deep Hinge Stile .L._L--'-== CTR Pivot (If Applicable)
SPW557
55
5
96
91
SPW52122
170
70
101
91
SPW52122
r--. st +
14
@ Deep Hinge Stile With Shuffle Glaze Jamb
225
96 14
91
SPW52122
® Deep Meeting Stile
01.12
Note: Use SPW52122 Wide Lock Stile When Fitting Concealed Panic Bars
Half Full Size
SPWS00.A.03 01.12
0 0 ~ SRA021
SPW500 Thermal Framing General Arrangement - AFT Door Stiles
171
55 97
70 CTR Pivot
22.5
(i;\ SPW51011 32 14
\2Y Anti-Finger Trap
172 97
SPW55253 70 CTR Pivot
22.5
SPW51015 32 14
@ Anti-Finger Trap Panic Bars
Note: Use SPW52122 Wide Lock Stile When Fitting Concealed Panic Bars
Half Full Size
SPW500 Thermal Framing General Arrangement - Top, Bottom And Midrail
0 N 0 .... N ~
SPW53031
l() (0
0 N ~ a,
(0
SPWS00.A.04 "' 01.12
~ SPW51617
SPW51920
I 28 I
SPW51213
SO583/SO598 ;'.?
Half Full Size @ 100mm Bottom Rail Detail -
sPwsoo.A.os SPW500 Thermal Framina 01.12 General Arrangements - Bottom Rails And Door Thresholds
Key
Half Full Size
I. 28 . I
SPW51213 LO 0 ~
I 28 I
SPW51213
8D501
@100mm Bottom Rail Detail @100mm Bottom Rail Detail
28 1 · . I
SPW51213
@100mm Bottom Rail Detail
SPW500 Thermal Framing sPwsoo.A.06 General Arrangements - Deep Bottom Rails And Thresholds 01.12
Half Full Size
I 28 I
SPW52526
SO501
@ 150mm Bottom Rail Detail
Ol (0 ~ LO
LO
(0 ~--,,.---
I 28
28
SPW52526
@1 somm Bottom Rail Detail
I
SPW52526
@1 somm Bottom Rail Detail
SPWS00.A.07 01.12
For Concealed Overhead Door Closers.
Half Full Size
SPW500 Thermal Framing General Arrangements - Door Header Bars
LO CX)
LO (0
SPW51617
0 (0
@ Header - Integral Bead Carrier
SPW500 Thermal Framing General Arrangements - Mullions/Transoms
Half Full Size
55
I SPW55050
13.5 13.5
@oouble Bead
@
@ Mulli_on----1'-----1'--__...,
@
SPWS00.A.08 01.12
13.5 13.5
70
SPWS00.A.09 SPW500 Thermal Framing 01.12 General Arrangements - Shuffle Glaze Transom/Mullion
~Transom
Half Full Size
17.5 17.5
0 N
0 N
SPWSOO.A.11 01.12
l{)
"Sf' co
SGP26x6mm PACK Please Refer To Page SPW501.D.205
Half Full Size
l{) l{)
l{) ~
l{)
"Sf' ~
SPWS00 Thermal Framing General Arrangements - Cill
100
"<I" ~
~ l{) ('")
150
Q)cill
100
SPW55051
193 4.5
197.5
Q)cill
SPW500 Thermal Framing General Arrangement - Head
Half Full Size
I!) I!)
I!) C')
1'i
"St ~
SPW55253
100
(DHead
I!) ~
100
(D Head
SPWS00.A.12 01.12
SPWS00.A.13 01.12
SPW55555 To Be Flush With Front Face Of SMR973
SPW500 Thermal Framina General Arrangements - Door into C/Wall
@ LO (0
0 (0
Note: For Framing Details, see Hybrid Curtain Wall Manual
Half Full Size
SPW500 Thermal Framing General Arrangements - Door into C/Wall
102
97
70 CTR Pivot
® Anti-Finger Trap
14
5
Will Require Finishing ® e.g. Powder Coating
5
101
96
SPW52122
SPWS00.A.14 01.12
Note: For Framing Details, see Hybrid Curtain Wall Manual
Half Full Size
SPWS00.A.15 01.12
SPW55555 To Be Flush With Front Face Of SMR973
SPW500 Thermal Framina
LO (0
@
General Arrangements - Door into C/Wall
LO (0
0 (0
Note: For Framing Details, see Curtain Wall Manuals
Half Full Size
SPW500 Thermal Framina SPWS00.A.16 General Arrangements - AFT Door into C/Wa'rr
Half Full Size
97
70 CTR Pivot
® Anti-Finger Trap
14 101
5 96 i-------------,
Require Finishing eg. ® Powder Coating
SPW52122
Note: For Framing Details, see Curtain Wall Manuals
01.12
SPWS00.A.17 01.12
Half Full Size
0 0 ~ SPW561
SPW500 Thermal Framing General Arrangements - Corner Post
90° Corner 100
41.5
SPWS00.B.101 01.12
I!)
...--r---
0 ...--...--
SPW51415 Door Stile 4?
SPW52122 Deep Door Stile
47
SPW5SCS 7
Door Stile Cover Strip
SPW500 Thermal Framing Section Identification - Door Stiles
m ...--
I!)
N I!)
m ...--
...--m
Door Stile ALUMINIUM OUTER ALUMINIUM INNER PERIMETER OUTER PERIMETER INNER OVERALL EXTERNAL PERIMETER POL YAMIDE UPPER POLYAMIDE LOWER
lxx.-lyy t
PAS24 SECTION
Deep Door Stile ALUMINIUM OUTER ALUMINIUM INNER PERIMETER OUTER PERIMETER INNER OVERALL EXTERNAL PERIMETER POL YAMIDE UPPER POL YAMIDE LOWER
lxx.-lyy t
Door Stile Cover Strip SPW5SCS RIGID PVC
SPW514 SPW515 276mm 219mm 301mm PAW231800S PAW940400S
17.2473cm4 18.4558cm4
SPW521 SPW522 346mm 289mm 378mm PAW231800S PAW940400S
27.4007cm4 76.1374cm4
SPW500 Thermal Framing SPWS00.B.102 Section Identification - AFT Door Stiles
I.()
O") CD
I.()
...... r---
SPW51011 AFT Door Stile
56 SPW51015 AFT Panic Bar Door Stile
SPW5AFTT Anti Finger Trap Trim
O") ......
I.()
N I.()
O") ......
I.()
0 I.()
AFT Door Stile ALUMINIUM OUTER ALUMINIUM INNER INTERNAL PERIMETER OUTER EXTERNAL PERIMETER OUTER INTERNAL PERIMETER INNER EXTERNAL PERIMETER INNER OVERALL EXTERNAL PERIMETER POL YAMIDE UPPER POLYAMIDE LOWER
lxx._ lyy t PAS24 SECTION
AFT Panic Bar Door Stile ALUMINIUM OUTER ALUMINIUM INNER INTERNAL PERIMETER OUTER EXTERNAL PERIMETER OUTER EXTERNAL PERIMETER INNER OVERALL EXTERNAL PERIMETER POL YAMIDE UPPER POLYAMIDE LOWER
lxx._ lyy t PAS24 SECTION
Anti Finger Trap Trim SPW5AFTT RIGID PVC
01.12
SPW510 SPW511 118mm 229mm 117mm 177mm 316mm PAW231800S PAW940400S
33.2320cm4 49.2691cm4
SPW510 SPW515 118mm 229mm 219mm 318mm PAW231800S PAW940400S
19.3274cm4 21.9069cm4
SPWS00.B.103 01.12
0) r-,..
0) ...... ......
46
SPW51617 Top Rail
SPW51213 Bottom Rail
46
0 co
0) ......
0 0 ......
Top Rail ALUMINIUM OUTER SPW516 ALUMINIUM INNER SPW517 PERIMETER OUTER 304mm PERIMETER INNER 215mm OVERALL EXTERNAL PERIMETER 344mm POL YAMIDE UPPER PAW940400 POLYAMIDE LOWER PAW231800
w SPW527CT18
lxx.- 21.7906cm4
lyy t 19.1728cm4
PAS24 SECTION
Bottom Rail ALUMINIUM OUTER SPW512 ALUMINIUM INNER SPW513 PERIMETER OUTER 366mm PERIMETER INNER 314mm OVERALL EXTERNAL PERIMETER 476mm POL YAMIDE UPPER PAW231800 POLYAMIDE LOWER PAW940400
w SPW527CT38
lxx.- 33.1749cm4 lyy t 77.5657cm4
PAS24 SECTION
SPW500 Thermal Framing SPWS00.B.104 Section Identification - Deep Bottom Rail
O") co ......
SPW52526 Deep Bottom Rail
46
0 LO ......
Deep Bottom Rail ALUMINIUM OUTER ALUMINIUM INNER PERIMETER OUTER PERIMETER INNER OVERALL EXTERNAL PERIMETER POL YAMIDE UPPER POL YAMIDE LOWER
w lxx.--lyy t
01.12
SPW525 SPW526 470mm 420mm 576mm PAW231800 PAW940400
SPW527CT88
33.1749cm4 77.5657cm4
SPW500 Thermal Framing SPWS00.B.106 Section Identification - Deep Midrail
0 0 N
46
SPW53031 Deep Mid Rail
N c.o ......
en ......
Deep Mid Rail ALUMINIUM OUTER ALUMINIUM INNER PERIMETER OUTER PERIMETER INNER OVERALL EXTERNAL PERIMETER POL YAMIDE UPPER POLYAMIDE LOWER
w lxx .-lyy t
SPW530 SPW531 523mm 417mm 401mm PAW231800 PAW231800
SPW527CT134
400.0098cm 4
54.8586cm4
01.12
sPwsoo.s.101 SPW500 Thermal Framing 01.12 Section Identification - Jamb Trims, Rail Cleat And Brush Seal Carrier
SPW52928 AFT Jamb Trim
47 SPW52828 AFT Jamb Trim
LO ......
SPW527 RailCleat
AFT Jamb Trim ALUMINIUM OUTER ALUMINIUM INNER INTERNAL PERIMETER OUTER INTERNAL PERIMETER INNER EXTERNAL PERIMETER OUTER EXTERNAL PERIMETER INNER OVERALL EXTERNAL PERIMETER POL YAMIDE UPPER POLYAMIDE LOWER lxx.--lyy t
AFT Jamb Trim ALUMINIUM OUTER ALUMINIUM INNER INTERNAL PERIMETER OUTER INTERNAL PERIMETER INNER EXTERNAL PERIMETER OUTER EXTERNAL PERIMETER INNER OVERALL EXTERNAL PERIMETER POL YAMIDE UPPER POLYAMIDE LOWER
lxx.--lyy t
SPW529 SPW528 140mm 81mm 140mm 81mm 206mm PAW940400S PAW940400S 17.2473cm4 18.4558cm4
SPW528 SPW528 140mm 81mm 140mm 81mm 206mm PAW940400S PAW940400S 17.2473cm4 18.4558cm4
SPW500 Thermal Framing Section Identification - Handles
S0584 HANDLE PERIMETER 365mm
S0564 SLIM PAD HANDLE PERIMETER 339mm
SPWS00.B.108
0 LO
0 (")
01.12
SPWS00.B.201 SPW500 Thermal Framing 01.12
100
[ SPW55051
34 100
SPW55253
99.5
0 N
SPW55054
Framing/Transom/Mullion
Thermal frame ALUMINIUM OUTER ALUMINIUM INNER INTERNAL PERIMETER OUTER EXTERNAL PERIMETER OUTER INTERNAL PERIMETER INNER EXTERNAL PERIMETER INNER OVERALL EXTERNAL PERIMETER POLYAMIDE UPPER POLYAMIDE LOWER
lxx.,_ lyy t
Deep Thermal Frame ALUMINIUM OUTER ALUMINIUM INNER INTERNAL PERIMETER OUTER EXTERNAL PERIMETER OUTER INTERNAL PERIMETER INNER EXTERNAL PERIMETER INNER OVERALL EXTERNAL PERIMETER POL YAMIDE UPPER POLYAMIDE LOWER
lxx.,_ lyy t
Thermal Transom/Mullion ALUMINIUM OUTER ALUMINIUM INNER INTERNAL PERIMETER OUTER EXTERNAL PERIMETER OUTER INTERNAL PERIMETER INNER EXTERNAL PERIMETER INNER OVERALL EXTERNAL PERIMETER POLYAMIDE UPPER POLYAMIDE LOWER
lxx.,_ lyy t
SPW550 SPW551 N/Amm 198mm 122mm 183mm 363mm PAW939700 PAW939700
65.5967cm4 7.7310cm4
SPW552 SPW553 N/Amm 315mm 122mm 242mm 474mm PAW939700 PAW939700
99.0276cm4 16.1360cm4
SPW550 SPW554 N/Amm 198mm 197mm 228mm 408mm PAW939700 PAW939700
73.4822cm4 19.4221cm4
LO LO
SPW500 Thermal Framing Shuffle Glaze Transom And Mullion
99
SPW56654
31 37
101
37
LO ...--
SPW56767
LO N
LO LO
SPWS00.B.202
Thermal Transom ALUMINIUM OUTER ALUMINIUM INNER INTERNAL PERIMETER OUTER EXTERNAL PERIMETER OUTER INTERNAL PERIMETER INNER EXTERNAL PERIMETER INNER OVERALL EXTERNAL PERIMETER POL YAMIDE UPPER POLYAMIDE LOWER
lxx .-lyy t
Thermal Mullion ALUMINIUM OUTER ALUMINIUM INNER INTERNAL PERIMETER OUTER EXTERNAL PERIMETER OUTER INTERNAL PERIMETER INNER EXTERNAL PERIMETER INNER OVERALL EXTERNAL PERIMETER POLYAMIDE UPPER POLYAMIDE LOWER
lxx.-lyy t
01.12
SPW566 SPW554 122mm 190mm 197mm 228mm 408mm PAW939700 PAW939700
103.8213cm4 27.4209cm4
SPW567 SPW567 N/Amm 198mm 197mm 228mm 408mm PAW939700 PAW939700
125.9457cm4 38.9937cm4
SPWS00.B.203 SPW500 Thermal Framing 01.12
LO (0
~Lt ,,
Section Identification - Header Bar and Universal Frame
99
SPW55555
100
I l ii 1 SPW55050
Thermal Header Bar ALUMINIUM OUTER ALUMINIUM INNER INTERNAL PERIMETER OUTER EXTERNAL PERIMETER OUTER INTERNAL PERIMETER INNER EXTERNAL PERIMETER INNER OVERALL EXTERNAL PERIMETER POL YAMIDE UPPER POL YAMIDE LOWER
lxx .-lyy t
Universal Thermal Frame ALUMINIUM OUTER ALUMINIUM INNER INTERNAL PERIMETER OUTER EXTERNAL PERIMETER OUTER INTERNAL PERIMETER INNER EXTERNAL PERIMETER INNER OVERALL EXTERNAL PERIMETER POL YAMIDE UPPER POL YAMIDE LOWER
lxx.-lyy t
SPW555 SPW555 N/Amm 198mm 122mm 183mm 363mm PAW939700 PAW939700
133.2604cm 4 29.6131cm4
SPW550 SPW550 N/Amm 198mm N/Amm 198mm 242mm PAW939700 PAW939700
50.4747cm4 0.7600cm4
SPW500 Thermal Framina sPwsoo.s.204 Section Identification - Beads, Jamb Closers,lnfill Etc. 01.12
I
{
I
{
{
~
31
31.5
36.5
39
~
SPW556 28mm BEAD PERIMETER 178mm
cJl SRA021 PVC BACK PLATE
SPW557 DOOR JAMB CLOSER EXT PERIMETER 116mm INT PERIMETER 87mm
SPW5JI PVC JAMB IN-FILL
SPW5JISG PVC JAMB IN-FILL
SFG118NT SUB GILL PERIMETER 517mm
~
PLEASE NOTE: ENSURE THIS SECTION IS ORDERED THERMALLY BROKEN I.E. SFG118NT
150
SPWS00.B.205 01.12
LO ..---
~1
~1
SPW560NT Thermal Threshold
8D583 Standard Threshold
SPW500 Thermal Framing Section Identification - Thresholds
Thermal Threshold ALUMINIUM OUTER SPW560NT INTERNAL PERIMETER 160 mm EXTERNAL PERIMETER 341mm
98
SPW663
l Low Threshold Ramp PERIMETER 105mm
SPW663 Low Threshold Ramp
Standard Threshold PERIMETER 306mm
98
I Square Eded Threshold PERIMETER 309mm
98 I
Drained Threshold PERIMETER 272mm !NT.PERIMETER 147mm
98
SPW500 Thermal Framing sPwsoo.s.206 Section Identification - Corner Posts 33.5 01.12
0 0 ......
SPW561 !00mm External Corner Post EXT PERIMETER 512mm
100
SPW564 Corner Post
SPW563 Corner Post
SPW562 Corner Post
SPW565 Corner Post
EXT PERIMETER 274mm
44.5
133mm
SPWS00.B.207 05.18
25
SPWS00 Thermal Framing
SPW343570
Section Identification - Cill
Thermal Header Bar ALUMINIUM OUTER ALUMINIUM INNER INTERNAL PERIMETER OUTER EXTERNAL PERIMETER OUTER INTERNAL PERIMETER INNER EXTERNAL PERIMETER INNER OVERALL EXTERNAL PERIMETER POL YAMIDE UPPER POLYAMIDE LOWER END CAPS
lxx..-lyy t
SPW343 SPW570 278mm 309mm 129mm 227mm 519mm PAW444200 PAW444200 SXEC/SXECB
133.2604cm 4 29.6131cm4
SPWS00.C.01 SPW500 Thermal Framing 01.12 Accessories - Closers and Bracketry
Closer Components Available Separately
LIGHT DUTY go0 Hold Open Closer Complete
AXTC881290 MEDIUM DUTY go0 Hold Open Closer Complete
AXTC881390 HEAW DUTY go0 Hold Open Closer Complete
AXTC881100 LIGHT DUTY No Hold Closer Complete
AXTC881200 MEDIUM DUTY No Hold Closer Complete
AXTC881300 HEAW DUTY No Hold Closer Complete
AXTC8800DUMMY Dummy Closer Complete
SD24LN@ Additional Locking Nut For Bottom Pivot
~ ~SDTHW ~ Sq. Washer For SD501
AXTC880003 'F' Bracket with Screws(Set A)
~SDTEE ~ TeeNut
SDTW Spring Washer SFG139RCUT
SOTS Header Bar Packer
Tee Nut Screw
SPW5DCB~AFT o Door Closer Bottom Bracket AFT o
0
Bottom Pivot Bracket
SPW5DCTBAFT Door Closer Top Bracket AFT
AXTC8800T13
AXTC880015 End Load Top Arm Assembly Use for SPW51011 Roundnose Stiles.
...1 §Si
AXTC880013 Special Top Arm Assembly Short Side Load
~ I AXTC880002 ~ Bottom Pivot Assembly
~
~ ~ AXFS60000114+0115 '~ Retractable Heavy Duty Top Centre
Door Closer Bottom Bracket
Door Closer Top Bracket
SPW500 Thermal Framing sPwsoo.c.02 Accessories - PAS24 Accessories - *Single Door Only* 01.12
~c
•
•
SPW5ASBP Armoured Strike Back Plate
SD51142997N HEAVY DUTY Hold Open End Load AFT Closer- Complete
SD51141997N HEAVY DUTY No Hold Open End Load AFT Closer- Complete
SD51132997N 0 MEDIUM DUTY Hold Open End Load AFT Closer - Complete
a ~0
0 SD51131997N g ~ 0 MEDIUM DUTY No Hold Open End Load AFT Closer - Complete
"'=" SD51122997N LIGHT DUTY Hold Open End Load AFT Closer - Complete
SD51121997N LIGHT DUTY No Hold Open End Load AFT Closer - Complete
SD24AHL Sentinel Hook Lock
SD24AAST 0 Security Armoured Strike SD24AHLFPF 0 Face Plate 0
l) SD24AASTFP @ ~ a Armoured Strike ~ '-~ Flat Faoo Plate w .
8D24~
SD24AESC ~ Security Escutcheon
l)_
Kitemark Cylinder
SECURITY TEST PAS24 CERTIFICATE CHILT/P10113/REV1
HARDWARE PRODUCT CODE FIXING DETAILS
CLOSER SD511XX997N INCLUDED IN CLOSER KIT
CLOSER SD511XX997N 2No. SFSPM0630 1 No. SFSPS01 INTO LEAF. INTEGRAL BOLT INTO RECIEVER THROUGH THRESHOLD WITH WASHER SDTHW AND ADDITIONAL LOCK NUT SD24LN. LOCTITE WAS APPLIED TO ALL NUTS & HELD WITH 1No. MACHINE SCREW FROM KIT.
LOCKING 2No. SD24AHL 4.No. SFSCM0510 PER --MECHANISM LOCK
KEEPS 2No. SD24AAST FIXINGS SUPPLIED WITH c/w SD24AASTFP THE SD24AAST
HANDLES SD584 2No. SDTHR THREADED BARS c/w SDDN NUTS
CYLINDER 2No. SD24AEC FIXINGS SUPPLIED WITH SD24AECS
CYLINDER 2No. SD24AESC FIXINGS SUPPLIED WITH GUARD SD24AESC
SPWS00.C.03 SPW500 Thermal Framing Accessories - Locks And Fittings 01.12
AEC~ 17mm Euro Cylinder
AECPASS AEC~ 17mm Half Cylinder
~ SPW5FBG ~ Flush Bolt Guide
SPW206013
~ SFSCS0? No8x16Lg C'sk M/C Screw
Flat Faced Flush Bolt Natural
17mm E,m Cy::::::• ~me K~ AEC~
Lock Bracket ~ 17mm Euro Cylinder Thumbturn
~ SO24AHL Sentinel Hook Lock
SO24AHLFPF n Face Plate u
AESCN Self Adhesive Escutcheon Anodised Natural (SAA.)
AESCB Self Adhesive Escutcheon Anodised Black
SPW5FBB Flush Bolt Bracket
0 @w! S024AESC ~ ~ Security Escutcheon
SO24AEC SOS FOAM Kitemark Cylinder
Hook Lock Door Stop Foam Tape
AHLFPF SOS
SCWR Plain Faceplate Door Stop Mill
Stud Rivet
0~ AXRC785AL Rim Cylinder inc 2 Keys SAA
AXMP786AL Rim Cylinder Mount and Lockring
AXPR7085PALRH AXPR7085PALLH Push handle (PALRH shown) Use With SPW52122 Only
SOSP
Door Stop Natural
AXPR7085AL
□ AXRE712 300mm Extension Coupling Rod For AXPR7085 Range (For Doors Above 2135mm High)
SPW500 Thermal Framing SPWS00.C.04 Accessories - Letter Plates And Packs
Sleeved Letterplates Overall Letterplate Size 295mm x 65mm Aperture Size 253mm x 36mm (for A4 envelopes)
SLP2 Sleeved Letterplate - Mill Finish, Unassembled
SLP2N Sleeved Letterplate - Natural Anodised, (SAA.)
SLP2A Sleeved Letterplate -Anolok 547 Bronze Anodised
SLP2P Sleeved Letterplate - Powder Coated
SGP28x1 mm 28mm x 100mm DG Glass Packer@ 1 mm thick, Green.
SGP28x2mm 28mm x 100mm DG Glass Packer@ 2mm thick, Black.
SGP28x3mm 28mm x 100mm DG Glass Packer@ 3mm thick, White.
SGP28x4mm 28mm x 100mm DG Glass Packer@4mm thick, Grey.
SGP28x5mm 28mm x 100mm DG Glass Packer@5mm thick, Blue.
SGP28x6mm 28mm x 100mm DG Glass Packer@ 6mm thick, Red.
~ ~!'m8F{;,g Packe,
01.12
SPWS00.C.05 01.12
SPW527CT38 Bottom Rail Cleat
SPW527CT88 Deep Bottom Rail Cleat
SPW5CP Cruciform Jointing Plate
SFSCS03 #8x12LG C/SK ~ Self Tapping Screw
SPW500 Thermal Framing Accessories - Cleats And Fixings
SPW527CT18 Top Rail Cleat
SPW527CT54 MidRail Cleat
SPW5TBBP Tie Bar Back Plate
SPW527CT134 Deep MidRail Cleat
~GA
~ SPW5TBBPAFT ~ Tie Bar Back Plate
Shuffle Glaze Angle
SFSPS28 #8x12LG. ~ :t Self Tapping Screw "'CEW SPW5MA
SFSCS1025 Midrail Angle Bracket
SPW5CA #10x25LG.
Cruciform Jointing Angle
SFSCS07 #8x15LG. ~ Self Tapping Screw
Self Tapping Screw
SFSPM0620 M6x20 Long P/Head Machine Screw
M6x30 Long P/Head Machine Screw
SDTIEROD
SFSCM0510 M5x10Lg C's~ M/C Screw ~
SFSPS30 #8x25LG. ~Self Tapping Sere~
1.0m x 8mm Galv Steel Tie Rod (lad,des 2 No. M8 Nyto, N,ts~
SPWTRC Connecting Sleeve
#10x35LG. Self Tapping Screw
SFSPS04 #10x12LG. "1 Self Tapping Screw
SFSCS850
M8x40mmSocketHeadBolt SPACS10X16 ~ No10x16LG C/Sk Screw
SFSPS05 ~ No10x32LG C/Sk Screw
SFSCS29 No8x50LG C/Sk Screw #1Ox19LG. ~ Self Tapping Screw SRAM8SW~
#8x40LG. Self Tapping Screw ::r,
SFSCM0612 i M6x12Ig C'sk M/C Screws SFSCS0819 ~
No8x19Lg C'sk ST Screw
M8 Spring Washer SFSLN08 M8 Lock Nut ~
~SFSCM0410 W M4x10Lg C'sk M/C Screw
SPW500 Thermal Framing Accessories - Pad Handles
SDDN M6 Dome Nut - Stainless Steel
SD584 Standard Pad Handle
STANDARD PAD HANDLES
SD5848 Mill Finish
SD5848N Silver Anodised
SD5848A Anolok Bronze 54 7
SD5848P Powder Coated
SPWS00.C.06 01.12
SD564 Slimline Pad Handle
SLIM PAD HANDLES
SD564200 Mill Finish
SD564200N Silver Anodised
SD564200A Anolok Bronze 54 7
SD564200P Powder Coated
SPWS00.D.101 SPW500 Thermal Framing 01.12
L
' !! L
Deductions - Narrow & Wide Stiles
52.5
--
52 5
--
Single Door - Narrow Stiles
Rail=W-115 52 5
--' ~ Ii: [: JJ ~
a e; !!I ! ; __
•-' SPW51411
Glass= W-125 ISPW51415
L Door 0/AII = W-10 Brush Strips = Rails + 90
w Double Door - Narrow Stiles
Rail = (W-226)/2 52.5- -52,5 Rail = (W-226)/2 5
-- --52.5
--' ~ Ii ~ Ii: [: ] ~ Ii: [ JJ ~
a e; !!, ! ,~ a e; !!I !
~PW514151
91
-- ·-Glass = (W-246)/2
Door Leaf Brush Strips = Rails + 90
91
SPW52122
ISPW51415 SPW514151
w
Single Door - Wide Stiles
Rail= W-192
-- --'i Ii: [: JJ !! e; --I Glass = W-202 I
5 Door 0/AII = W-10 ~
Brush Strips = Rails + 168
w
Double Door - Wide Stiles
Rail = (W-379)/2 91 - ~ 91 5
Glass = (W-246)/2 ISPW51415
Door Leaf Brush Strips = Rails + 90
91
SPW52122
~ ~
~ !
5 i---
Rail = (W-379)/2 91
~
SPW52122 SPW52122 SPW52122 SPW52122
Ii: -- --
~ ~ ' Ii: -- -- ~ g: JJ [: JJ e; !!I ! !! e; !!, -- ' i -- --7
I Glass = (W-399)/21 I Glass = (W-399)/21
Door Leaf Door Leaf Brush Strips = Rails + 168 Brush Strips = Rails + 168
w
Note: Use SPW52122 Wide Stile When Fitting Concealed Panic Bars Tie Bar Cutting Size = Rail Size + 54
~
!
___§_
SPW500 Thermal Framing SPWS00.D.102 Deductions - Anti-Finger Trap Stiles
To Underside Of Header Bar
97
97
Single Door - Narrow Stiles
Rail= W-154.5
Glass = Rails - 10
Brush Strips = Rails + 90
w
Double Door - Narrow Stiles
5
52.5
Rail = W-304/2 52.5 52.5 Rail = W-304/2
Brush Strips = Rails + 90
w
Glass = Rails - 10
Brush Strips = Rails + 90
Single Door - Wide Stiles
97
97 Rail= W-193 91 5 f------~~-~+-----~~~~-------t~-~----1~
Rail = W-381/2
Glass= Rails - 10
Brush Strips= Rails +129
Glass = Rails - 10
Brush Strips = Rails + 129
w
Double Door - Wide Stiles
5 91 91
w
Rail = W-381/2
Glass= Rails - 10
Brush Strips = Rails +129
97
Note: Use SPW52122 Wide Stile When Fitting Concealed Panic Bars Tie Bar Cutting Size = Rail Size + 54
01.12
SPWS00.D.103 01.12
-..c:: .Ql Q)
I Q) (.) c:: ~ -c::
UJ ,_ (tl Q)
c3 II
I
-.::I" N
I
I II
.:E C)
"ai I ,_ 0 0 0
0 0
SPW500 Thermal Framina
SPW51617
SPW51213
SPW51213
SPW560NT
49
0 LO (0 (0
LO 0 .....
0 0 .....
N N
I
I II -..c:: C)
"ai I ,_ 0 0 0
0) .....
LO 0 .....
Deductions - Top And Bottom Rails
.:E C)
"ai I Q) -.::I" (.) N c:: ~
I - I c:: II UJ ,_ -..c:: (tl .:E C) Q) C) "ai c3 "ai I
II I ,_ I Q) 0
0 LO (.) 0 LO c:: 0 LO ..... ~
..... -c:: UJ ,_
SPW52526 (tl Q)
c3 II
I
SO501
SPW500 Thermal Framing Deductions - Mid Rails
0 N ~ 0)
0 N 0 r--N ..-
SPW51920
SPW53031
N 00
I.C)
N co .....
SPWS00.D.104 01.12
SPWS00.D.201 SPW500 Thermal Framing 01.12 Deductions - Framing
..... SPW55051 """ Lt)
Lt)
Lt) ('I)
""" ..... w w N N u5 u5 en en en en <( <( ...J ...J
(!J (!J
II II CX) CX)
N N
+ + w w z z ::::i ::::i I- I-I I (!J (!J
u5 u5 Lt) ('I)
Lt) ..... Lt) Lt)
SPW55051
iq 5 r--N
Lt)
~ N w
N u5 en en ::S (!J II
CX) N + w z ...J
I-I (!J
Lt) u5
~ N
Lt)
~ N
SPW500 Thermal Framing SPWS00.D.202 Deductions - Framing
SIGHT LINE + 20 = GLASS SIZE
Must Have Deep Pocket To Shallow
10
JJ
45
*PLEASE ENSURE D COVER IS EQUAL*
*PLEASE ENSURE COVER IS EQUAL*
II U") .....
01.12
SPWS00.D.203 01.12
I.{) (")
I.{) I.{)
SPW500 Thermal Framing
SPW53031
r--. s::t"
J
co
N 0)
N 0)
co
w N en Cl) Cl)
:5 (9 II
c.o ..... + w z ...J
I-I (9
en
Deductions - Framing
100
I.{) I.{)
w N en Cl) Cl) <( ...J (9 II
co N + w z ...J
I-I (9
en
I.{) co
SPW500 Thermal Framing SPWS00.D.204 Frame Cut-Out Details
SPW55054
SFSPS01 - No1 0x32mmLG PanHd ST Screws Typ. Frame Assembly Screws
100
62
62
For Cut-out Details See Lt)
Pages SPW500.D.204 & 205 r-..:
SPW55051
~1~~1 f SPW55050 7
SPW560
~,~ I~
f SPW560NT ~
62
01.12
SPWS00.D.205 SPW500 Thermal Framing 01.12 Cut-out Details
CUT-OUT FOR SPW55555 CUT-OUT FOR SPW55054
1·31.5.1 1·31.5.1
(~[Jj {~LJ] SPW55051 SPW55051
SPW500 Thermal Framing SPWS00.D.206 Threshold Cut-out Details 01.12
98
SPW560NT
I . 37 .I . 30.5 .I
SPW55051
SPWS00.D.207 SPWS00 Thermal Framing 05.18
30
Drain Slot Detail
Silicone Point Along Front Edge Of Frame
Leaving a 30mm Gap 65mm From C ners & Max Of 600mm Centres.
SGP26x6mm Packs Positioned At 150mm From Corners & A Maximum
Of 600mm Centres. Fixings To Be Thro Or Adjacent
To Packs. Ensure Packs Do Not lmpead Drainage.
Drainage - Framing
(0
Q)cill
SPWS00.E.01 SPW500 Thermal Framing 01.12
Please Note: Holes "A" Are NOT required On The Inside Of The Door. Also Holes "A" & "B" not required
a when using self adhesive
~--~scuthcheon AESCN/AESCB
~ (J),"~ N
LO co
Please Note: Holes "A" Are NOT Required On The Inside Of The Door
SFSCM0510 M5x10Lg C's M/C Screw
00
0 N
SPWSLB Lock Bracket 2-0ff
SD24AHL Sentinel Hook Lock
SD24AHLFPF Flat Face Plate
SPWSSCS Stile Cover Strip
SPWSSCS Stile Cover Strip
VIEWED FROM THE OUTSIDE LEFT HAND HUNG SHOWN RIGHT HAND OPPOSITE
- Security Lock Details
SPW500 Thermal Framing SPWS00.E.02 Preparation Details - Lock Details
SFSCM0510 M5x1 OLg C'sk M/C Screw
AHLFPF Plain Face Plate
SPW5LB Lock Bracket 2-0ff
AHL
SPW5SCS Stile Cover Strip
Standard Hook Lock
SPW5SCS Stile Cover Strip
VIEWED FROM THE OUTSIDE LEFT HAND HUNG SHOWN RIGHT HAND OPPOSITE
01.12
I '
11 ' I
AEC 17mm Euro Cylinder
AESC Self Adhesive Escutcheon
AESCB Self Adhesive Escutcheon
SPWS00.E.03 SPW500 Thermal Framing 01.12 Preparation Detail - Top Rail For Standard Stiles
Position the SPW5DCTB Plate With-in the Top Rail Using 2 - M6x12Ig C'sk M/C Screws SFSCM0612 Prior to Fixing the Closer Channel to the Rail
SPW5DCTB
47
5 32
Ll'l N co N ~
'Sf" C')
5
Stile Drilling Details
SFSCS03 No8x12Lg C'sk ST Screw Drill 04.5 Clearance In SPW527CT38 To Suit. Please Note Screws To Be Fitted Perpendicular To The Cleat Fixing Face
SPW5TBBP Tie Bar Plate
SRAM8SW M8 Spring Washer M8 Nyloc Nut (supplied with SDTIEROD)
,,,,,,,-
SDTIEROD M8 Tie Bar
2 End Holes In Rail To Be Countersunk To Suit M6 M/C Screws 4 Inner Holes To Be Drilled 06.5
Either Arm May Be Used w;~? AXTC880013 Side Load Top Arm Assembly 'fi)
Fix Arm Channel To Top Rail With 4-M6 C'sk Screws
~r1i--------,---.~ + I. 32 +
• I 7
END MILLING DETAIL
FOR RAIL
(_-~SPW527C:8✓ ;
3«,~
J< -,~- ~ If)_ ' , ~ <:,
◊- 26
bl,\,.,df'l1ltH-- Note: Ensure Lock Nut Is Positioned With Flat Horizontal And Level With With
SFSCS30 No8x25Lg C'sk ST Screw
2-0ff C'Sink Rail To Suit
VIEWED FROM THE OUTSIDE RIGHT HAND HUNG SHOWN LEFT HAND OPPOSITE
Top Of Shear Block/Rail Cleat
SPW500 Thermal Framing SPWS00.E.04 Preparation Details - Bottom Rails for Standard Stiles 01.12
Position the SPW5DCBB Plate With-in the Bottom Rail Using M6x12Ig C'sk M/C Screws SFSCM0612 Prior to Fixing the Pivot 2-Holes 0 4.5
SFSCS03
Casting to the Rail Cleat Drilling Details
No8x12Lg C'sk ST Screw Drill 04.5 Clearance In SPW527CT38 To Suit. Please Note Screws To Be Fitted Perpendicular To The Cleat Fixing Face
SFSCS30 __ __,,j,j,1
No8x25Lg C'sk ST Screw 2-0ff
C'Sink Rail To Suit
SDTIEROD\ M8 Tie Bar
Countersunk To Suit M6 M/C Screws
SFSCM0612
/ /
,...., <D
l3RI I "' SPW527CT38~~ _ -~
i _.,.. SFSLNOB ~ M8 Lock Nut
Supplied With Tie Bar
VIEWED FROM THE OUTSIDE RIGHT HAND HUNG SHOWN LEFT HAND OPPOSITE
SPW5TBBP
~Ba<PI~ ! swe o,m,g o,.,;,, ID! I
f-
Centre Fixing To be Fitted on Installation After Adjustment, Self Tapper (SFSPS05) No1Ox19Lg PH ST Screw May be Used.
2- SFSPM0620 M6x20Ig Posi Drive Pan Hd M/C Screw.
4.5
+ + (0 N
I 32 I 7
END MILLING DETAIL
FOR RAIL
SPWS00.E.05 SPW500 Thermal Framing 01.12 Preparation Details - AFT Stile Bottom Pivot
\ \
\
,--
- -------f - -- ----------~- ·-
'---0 0 .....
I n, I I I I II II ~
/ " \
a? t I I.;:,
I I I I I C: .....
Ii co
\ I I 0:::
I r I I
I
I
•-
70mm .I Elevation ® 97mm To Rail End 44.5
70
SPW5BPB
SPW500 Thermal Framing SPWS00.E.06 Preparation Details - Top Rail AFT Stiles
4.5
+ I 32
co N
+ IW
*This Prep Also To Be Used When Using SPW52122
Deep Door Stile As Heal Stile, For Bottom Prep See ~
SPW500.E.07* §
AX880015 END MILLING DETAIL
FOR RAIL
End Load Top Arm Assembly
Position the SPW5DCTBAFT Plate With-in the Top Rail Using M6x12Ig C'sk M/C Screws SFSCM0612 Prior to Fixing the i Closer Channel to the Rail
SPW5DCTBAFT
SFSCS0819 No8x19Lg C'sk ST Screw Drill 04.5 Clearance In SPW527CT38 To Suit. Please Note Screws To Be Fitted Perpendicular To
SPWSTBBPAFT J The Cleat Fixing Face
Tie Bar Plate 'V *SPW5TB~B* ~
Tie Bar Plate ~ When Using '<) SPW52122
MB Nyloc Nut (supplied with SDTIEROD)
026 Hole
SPW527CT18 SFSCS30 No8x25Lg
C'skST Screw 2-0ff
SPW51011 Safety Stile
97
01.12
Fix Arm Channel To Top Rail With, 3 No M6 C/Sink Screws #' ~
~~ '
2 End Holes In Rail To Be Countersunk To
Suit M6 M/C Screws 3 Inner Holes To Be
Drilled 06.5
47
5 ,___3=2~_,5
Stile Drilling Details
2.5
SPWS00.E.07 SPW500 Thermal Framing 01.12 Preparation Details - Bottom Rails for AFT Stiles
SFSCS0819
,_
Position the SPWSDCBBAFT Plate With-in the Bottom Rail Using M6x12Ig C'sk M/C Screws SFSCM0612 Prior to Fixing the Pivot Casting to the Rail
SFSCS30 No8x25Lg C'sk ST Screw
2-0ff
Countersunk To Suit M6 M/C Screws
SFSCM0612
SDTHW
SD501
r I /
~ /
No8x19Lg C'sk ST Screw Drill 04.5 Clearance In SPW527CT38 To Suit Please Note Screws To Be Fitted Perpendicular To The Cleat Fixing Face
2-Holes 04.5
Centre Fixing To be Fitted on Installation After Adjustment, Self Tapper(SFSPS01) No10x32Ig PH ST Screw May be Used.
2- SFSPM0630 M6x30lg Posi Drive Pan Hd M/C Screw.
(D N
38
24 • I
41
41
+ + I 32 I 7
END MILLING DETAIL
FOR STILE
END MILLING DETAIL
FOR RAIL
SPW500 Thermal Framing Preparation Details - Typical Lock Stiles
SFSCS03 No8x12Lg C'sk ST Screw Drill 04.5 Clearance In SPW527CT38 To Suit. Please Note Screws To Be Fitted Perpendicular To The Cleat Fixing Face
SDTIEROD MB Tie Bar C::
SPW527CT18
SFSCS30 No8x25Lg C'sk ST Screw
2-0ff C'Sink Rail To Suit
SPWS00.E.08
+
01.12
co N
32 I 7
END MILLING DETAIL
FOR RAIL
bm,,,..#l'i~-Note: Ensure Lock Nut Is Positioned With Flat Horizontal And Level With With Top Of Shear Block/Rail Cleat
TYPICAL LOCK STILE TIE BAR DETAIL
VIEWED FROM THE OUTSIDE LEFT HAND HUNG SHOWN RIGHT HAND OPPOSITE
SFSCS03 No8x12Lg C'sk ST Screw Drill 04.5 Clearance In SPW527CT38 To Suit. Please Note Screws To Be Fitted Perpendicular To The Cleat Fixing Face
\ SFSLN08 MB Lock Nut
~! SIHe DMIUag De!aHs «)I ~
f-
l3R 11 ~ SPW527CT38~~ _ -~
i _,,- SFSLN08 lQi MB Lock Nut
SPW5TBBP Tie Bar Plate
SPWS00.E.09 SPW500 Thermal Framing 01.12 Preparation Detail - Cleat For Midrails & SLP2 Letterplate
4.5
SFSCS30 No8x25Lg C'sk ST Screw r 4-0ff
+ + (0 N
I 32 I 1
END MILLING DETAIL
FOR RAIL
SPW527CT54 (SPW527CT134)
Overall Letterplate Size 295mm x 65mm
SPW51415
SFSCS0819 No8x19Lg C'sk ST Screw 4-0ff Drill 04.5 Clearance In SPW527CUT54 To Suit Please Note Screws To Be Fitted Perpendicular To The Cleat Fixing Face
SPW500 Thermal Framing SPWS00.E.10 Preparation Details - Flush Bolts 1111
SPW5SCS Stile Cover Strip
SPW5FBB Flush Bolt Bracket 2-0ff
SPW5SCS Stile Cover Strip
SPW5FBG Flush Bolt Guide
SFSCS07 No8x16Lg C'sk M/C Screw
SFSCM0410
01.12
M4x1 Olg C'sk M/C Screw 4-0ff
SPW20601/3 Flat Faced Flush Bolt Natural
SPW5SCS TO BE POSTIONED BEFORE FLUSH BOLTS OR LOCK STRIKES.
SPW500.E.11 SPW500 Thermal Framing 05.12 Preparation - Header
SPW55555
SRA021 PVC Back Plate
Remove Hatch Areas For A Length Of *3oomm
As Detail Below (Detail Shows Nibs Only)
SDBR 1 Drill and CSK 2 Holes to suit M6x25LG C'sk M/c screws
"'<'~~~;?'not included with closer*
Closer Body
PUNCH TOOLING NOT RECOMMENDED FOR USE WITH PVC
OR POLYAMIDE SECTIONS
SDTEE-11
Spring Washers
SPW500 Thermal Framing Preparation - Header With Fan Light
SPW556 Bead Fixed Above Header Bar
@ SPW55555
SRA021 PVC Back Plate
Remove Hatch Areas For A Length Of *300mm
As Detail Below (Detail Shows Nibs Only)
SDBR21 Drill and CSK 2 Hole
SPWS00.E.12 05.12
M6x25LG C'sk M/c Sl:;i!l.!Ult:lt'-=-:::;-2~:::::., ~.....,.._,,~~~~~~"'C?'"not included with clo r
CD
y 39cR5
!__SPW557 Jamb Closer Fixed Below Header Bar Fix Using SFSCS07 No8x15Lg C'sk ST St Screws, 75mm From
I ends And @ 500mm Crs.l
n SPW556
PUNCH TOOLING NOT RECOMMENDED FOR USE WITH PVC
OR POLYAMIDE SECTIONS
SDTEE-11 Tee Nuts Fit In Slots In SFG114
a
SDTW12 Spring Washers
SDTS02 Screw
SPWS00.E.13 08.12
1111
SPW5SCS Stile Cover Strip
SPW5SCS
srn, eo,1il Strip
SPW500 Thermal Framing Preparation Details - Face Plate Into Meeting Stile
SPW5SCS TO BE POSTIONED BEFORE FLUSH BOLTS OR LOCK STRIKES.
SPW5LB Lock Bracket 2-Off
I 20 CUT-OUT I
26 CUT-OUT
SFSCM0510 M5x1 0Lg C'sk M/C Screw 4-Off
SDTEE Tee Nuts
AASTFP
SFSCM0510 M5x1 0Lg C'sk M/C Screw One-Off Decorative Only
Standard Armoured Strike Flat Face Plate
Security Armoured Strike Flat Face Plate
For Use With AHL Lock
**WHEN USING AHL STD LOCK USE AASTFP Standard Armoured Strike Flat Face Plate
SPW500 Thermal Framing SPWS00.E.14 Door Stop for Single Action Doors
SRA021
Remove Hatch Areas For A Length Of 120mm
SFSCS23
13
~---7
74
SECTION A-A
t I
105
I
I
I
SDSFOAM
45
I
~ -
I I I
I I
I I\ k tf:n I
I
IL!Jj I ILWj / '- I / '-
I I
I I I
L 'A' I I--.... 65 15 50 MINIMUM
PLEASE NOTE:- SINGLE DOOR LOCKING JAMB SHOWN. DOUBLE DOOR FIT ON CENTRE LINE OF MEETING STILES
-
-~
01.12
SPWS00.E.15 01.12
SPW5ASBP Armoured Strike Back Plate
SFSCM05 0 M5x50LG.C'Sk M/C Screw
SPW5 7 DoorJ mb Close
'-....
SPW500 Thermal Framing Lock Jamb Preparation
SD24MST Armoured Strike Inner most 2-Holes C'Sunk To Suit MS Screws
SPW5JI PVC JAMB IN-FILL
~
Jl
w
May Require Silicone Seating
SPW5JI
SPW557
Fix SPW557 Using SFSCS07 No8x15Lg. C'Sk St St Screw 75mm From Ends And @ 500mm Crs.
SPW500 Thermal Framing SPWS00.E.16
SPWSASBP Armoured Strike Back Plate
SFSCM0550 M5x50LG.C'Sk M/C Screw
To Avoid Possible Glass Damage When Using Shuffle Glazed Section As Lock Stile Ensure MS Screws Are Cut Down, So The Screws Are Flush With The SPWSASBP.
SD24AAST Armoured Strike Inner most 2-Holes C'Sunk To Suit MS Screws
SPW5JISG PVC JAMB IN-FILL
SPW5AS P
May Require Silicone Seating
01.12
SGP28X5MM Fit Glass Packer Behind Armoured Strike
SPWS00.E.17 SPW500 Thermal Framing 01.12 Cruciform Joint Frame
~ lbdJ U)j
~~7 SP!w054 r
~etg7 CUT-OUT FOR SPW55054
SFSPS28 #8x12LG PHd
SPW5CA Cruciform Jointing Angle
SFSCS1025 #1 0x25LG C/SK
SPW5CP SPW55054 Mullion
Cruciform Jointing late
SPW500 Thermal Framing Transom Joint Using Screw Fixings
SFSCS1025 #1 0x25LG C/SK
SPWS00.E.18 01.12
DRILL CLEARANCE HOLES ONE SIDE IN BOX SECTION
SPW55051 Mullion
SFSCS1025 #1 0x25LG C/SK
SPWS00.E.19 01.12
SFSCS03 #8x12LG C/SK
SPW500 Thermal Framing Transom Joint Using SPW5CA
SFSCS1025 #10x25LG C/SK
SPW5CA Cruciform Jointing Angle
Fix With 2-0ff SFSPS28 #8x12LG PHd
REVERSED VIEW FOR CLARITY
~ff~{]IJ SPW55054 L!)l
TIE~ CUT-OUT FOR SPW55054
SPW55054 Mullion
SPW500 Thermal Framing Head Connection
#1 0x25LG C/SK ONE-OFF
~4+~GI: ~ SPW55054 LO
~ CUT-OUT FOR SPW55054
SPW55054 Mullion
SPWS00.E.20
SFSCS1050 #1 0x50LG C/SK 2-OFF
01.12
SPWS00.E.21 SPW500 Thermal Framing 10.14 Shuffle Glazed Joint
SPW5CA Cruciform Jointing Angle
SPW56767
SFSPS28 #8x12LG PHd
SPW5CA Cruciform Jointing Angle
6
SPW5SG Shuffle Glaze Angle
SFSPS28/ #8x12LG PHd
SPW500 Thermal Framing Door Midrail Into Framing
SFSPS28 #8x12LG. Self Tapping Screw
SPW5MA Midrail Angle Bracket
*SPW51920 120mm Midrail
SPWS00.E.22 01.12
No8x19Lg C'sk ST Screw 2-0ff
SPW53031 200mm Midrail
SPWS00.E.23 01.12
SPW563
SPW500 Thermal Framing
SFSPS28 #8x12LG. Self Tapping Screw
SPW564
SPW565
135° Corner Post
FIX 75mm FROM EACH END AT A MAXIMUM OF 300mm CENTRES
SFSCS0819 #8x19LG. Self Tapping Screw
SPW500 Thermal Framing SPWS00.E.24 90° Corner Post
SFSPS28 #8x12LG. Self Tapping Screw
0.
SPW561 '-.
SPW562
SFSCS0819 #8x19LG. Self Tapping Screw
FIX 75mm FROM EACH END AT A MAXIMUM OF 300mm CENTRES
SFSCS0819 #8x19LG. Self Tapping Screw
SPW561
01.12
SPWS00.E.25 01.12
SPW5CG Coupling Gasket
SPW500 Thermal Framing Coupling Detail
FIX 75mm FROM EACH END AT A MAXIMUM OF 300mm CENTRES
Silicone Seal
SPW500 Thermal Framing SPWS00.E.26 Thermal Frame Fixing Details
SFSPS28 #8x12LG. Self Tapping Screw
FIX 100mm FROM EACH END AT A MAXIMUM OF 250mm STAGGERED CENTRES.
01.12
SPWS00.E.27 SPW500 Thermal Framing 01.12
PLEASE ENSURE FIXING HOLES ARE COUNTERSUNK.
FIX 75mm FROM EACH END AT A MAXIMUM OF 300mm CENTRES
WITH No8 ST SCREWS OF SUITABLE LENGTH DEPENDANT
ON POCKET DEPTH.
SPW52828 Fixing
SPW500 Thermal Framing Assembly - Bottom Rail Drip Bar
G) DRIP BAR TO BOTTOM RAIL
SGT80902F Double Sided Adhesive Tape 9mm x 1.1 mm Applied To Drip Bar Having First Deducted Between Stiles As Shown On Page 1.D.208
® DRIP BARTO BOTTOM RAIL
SFSPS28 No8 x 12mm Pan Head St/St S/Tapping Screws 25mm From Ends And At 450mm Max Centres
SPW51213 SPW52526
SPW51213 SPW52526
SPWS00.E.28 09.18
SPW51213 SPW52526
SO501