spring 2018 - az750602.vo.msecnd.net · over 18 metres? after decades of ... debate since the...
TRANSCRIPT
Richard Burnley Managing Director, Kingspan Insulation
WELCOME
As I write, we’re awaiting the publication of the final report from the
Independent Review of Building Regulations and Fire Safety. The review,
led by Dame Judith Hackitt, will provide a clear indication of the changes
that are likely to be made to the English Building Regulations governing
fire safety, which could represent the biggest shake up of our regulatory
system in well over a decade.
Safeguarding the health and lives of tenants must, of course, be
fundamental in the design and construction of any building. Given
the complexities inherent in fire risk management for high rise
buildings, Kingspan believes it is essential that any future
requirements are underpinned by large-scale testing of
complete cladding systems. This approach will provide an
accurate measure of how these systems can be expected to
perform in the event of an actual fire. Gene Murtagh, CEO
of Kingspan, outlines why this is important on page 4.
In this issue of Insulation Insight, we’ll also be taking
a look at how the London Plan is helping the Capital
to take control of its carbon emissions, discussing
what Kingspan Insulation is doing to tackle
waste and taking a behind-the-scenes peek
at some innovative new building projects
including the V&A Museum of Design in
Dundee and the first application of our
Kingspan roofing system.
For further information, or to join our
mailing list, please visit our website.
® 04WHY PEOPLE MUST ALWAYS BE THE PRIORITY
06CASE STUDY - KINGSPAN SPECIFIED FOR PIONEERING DESIGN MUSEUM
12FUTURE NOW: BIM
22OUR INSIGHT YOUR SPACE
16CASE STUDY - KINGSPAN IS LIGHT ON ITS FEET AT SAFARI PARK
10CASE STUDY - SCOTTISH SCHOOL IN INSULATION FIRST
20NEWS FROM THE KINGSPAN INSULATION COMMUNITY TRUST
1408RAISING THE BAR ON COMPLIANCE
18KINGSPAN VOICES
06PIONEERING DESIGN MUSEUM
CONTENTS
02 03
Simply put, the use of non-combustible and
limited combustibility materials is not a
guarantee of fire safety in construction. For
example, in the UK, materials are classified
as “non-combustible”, “combustible” or
of “limited combustibility” based solely on
small-scale tests of individual products.
These tests give no consideration to how
materials will perform when combined
in a system, as they would be on a real
building. It ignores the way that different
components within that system interact
with each other, and what might happen if
just one of those components fails in a fire.
Furthermore, there is currently no
requirement for systems in which the
insulation materials and the external
cladding are classified as non-combustible
or limited combustibility, to undergo any
kind of system testing. It is simply assumed
that the system would pass.
Another consideration is that, even in a
cladding system where the insulation and
external cladding are non-combustible,
there can still be a surprising proportion
of combustible material. Other essential
components such as gaskets, thermal
breaks, sealants, membranes, even the
binders that hold many non-combustible
insulation materials together can,
and will, burn.
So, if you don’t know how a cladding system
will perform (because it’s never been tested
as a system), and if it’s not feasible to
make it completely non-combustible, why
would you choose to go down the route
of making this the only way you can build
over 18 metres? After decades of research
into the fire performance of products, we
strongly believe that the best way to ensure
a cladding system’s safety is to test it as a
complete system, regardless of whether it
contains combustible, limited-combustibility
or non-combustible products.
This approach creates a clear, universal
standard for the industry to meet, without
ruling out tried and tested systems that
contain combustible materials, especially
for buildings where the use of non-
combustible or limited-combustibility
materials would be too thick or too heavy
to be practical.
Of course, looking at the requirements for
cladding systems is just one small aspect of
creating buildings that are safe.
BE THE PRIORITY
Why people must always
THE TRAGEDY OF GRENFELL TOWER IS A CALL TO ACTION FOR THE ENTIRE HOUSEBUILDING INDUSTRY.
BY GENE MURTAGH
Nothing is more important than protecting the
lives of people. As we work to deal
with the housing shortage in the UK, and to find room to
build or to upgrade our existing stock, this mantra
must stay front of mind. Our homes should be places
where we can be (and feel) sheltered, safe and secure.
One of the biggest concerns people have
voiced following the Grenfell Tower tragedy
is the issue of fire safety, particularly for high-
rise buildings. Since the Building Regulations
for Fire Safety are now under urgent review, it
is crucial that we take this opportunity to get the
system right. It is heartening, therefore, to see the
constructive direction of travel that Dame Judith
Hackitt is taking to achieve this, by not only examining
how the regulatory system needs to be strengthened,
but also how the construction industry operates at a
fundamental level.
Fire is not a straightforward issue. How and to what extent
a building fire develops depends on many different factors,
including the overall design, the quality of the installation, and
what passive or active fire protection measures are in place, as
well as what the building is made of. In her interim report published
last December, Dame Judith demonstrates a clear understanding
of the complexities that are involved. Yet, sadly, a great deal of the
debate since the publication of the report has been focussed purely on
the classification of the materials that make up cladding systems, (the
insulation and external cladding) and in particular, whether they should be
combustible or non-combustible.
Making buildings safe requires a lot more thought and consideration than
just restricting the kind of materials of which they can be made. It would be a
huge mistake to assume that simply switching to a blanket requirement for non-
combustible materials is a panacea.
Any sensible assessment of what happened
at Grenfell needs to consider a wide
range of factors including building height,
sprinkler installation, fire and smoke
detection, means of escape, flammability
of building contents, as well as the
combination of materials used in exterior
walls and internal finishes. Most critically
of all it also needs to review and assess
whether existing safeguards are being
applied and overseen properly.
The interim report for the Independent
Review of Building Regulations and
Fire Safety takes these complexities
into account and has outlined a holistic
approach to creating safer buildings,
and an industry that is fully aligned to
deliver them. It emphasises the need
to raise levels of competence for all
construction professionals engaged in
the fire prevention aspects of a building,
including design, construction, inspection
and maintenance.
As well as simpler, less ambiguous
regulations and guidance, it calls for
greater oversight of the quality of
installation, much stronger enforcement
of the rules, and sanctions for those
who do not follow them. Clear lines of
responsibility, better communication
and greater accountability are needed at
every stage, not just of construction, but
also during occupation of a building – a
“golden thread” of information, recording
every change that affects that building
throughout its life.
In each of the six key areas identified for
change in the report, the importance of the
role that people play is reiterated. The point
is that government can produce regulations
and provide guidance, but ultimately it
is the people on the ground who need to
make sure that these are implemented
properly. It is people who make decisions
to market products responsibly. It is people
who create the design, who procure the
products, who deliver the buildings. It is the
people who have to live in those buildings,
who need to be listened to and kept safe.
We have an opportunity now to enact
real change. To develop a system where
the whole supply chain works together
to create buildings that are safe, that
perform better, and that remain true to the
designer’s original intent throughout their
life cycle. In doing this we will not only help to protect
people from fire, we will also be giving them homes that
deliver on all fronts, including greater energy efficiency,
healthier environments, and higher levels of comfort.
Gene Murtagh is CEO of Kingspan Group.
Clear lines of responsibility, better communication and greater accountability are needed at every stage...
04 05
CASE STUDY
Kingspan Specified for PioneeringDESIGN MUSEUM
KENGO KUMA & ASSOCIATES’ design for V&A Dundee sets an impressive figure against the city’s waterfront. Its angular form, wrapped with horizontal concrete panels, draws inspiration from the dramatic cliffs of the country’s east coast. BAM Construct UK and Dundee City Council are overseeing construction of the £80 million museum which is due to open this September, providing 1,650 m2 of world class exhibition facilities.
The building, rated ‘Excellent’ at its design stage BREEAM assessment,
combines renewable energy generating technologies with a highly
insulated construction. To insulate the building’s expansive flat roof,
whilst also providing effective drainage, over 6,500 m2 of Kingspan
Thermataper® TT46 LPC/FM was specified along with a further 1,000
m2 of Kingspan Thermaroof® TR26 LPC/FM.
The high-performance roofing products were installed by Q9
Cladding Solutions. They can achieve thermal conductivities as low
as 0.022 W/m.K and are compatible with most mechanically fixed
single–ply waterproofing systems. Kingspan Insulation’s specialist
tapered roofing design team provided a detailed layout scheme for
the products. This ensured that the build-up met the target thermal
performance requirements with a minimal construction depth, limiting
structural support requirements, whilst also effectively channelling
water off the roof space. In addition, both products have been
approved to Factory Mutual Research Standard 4470: 2016 for
Class 1 Steel Deck Roof Assemblies and LPS 1181: Part 1.
To insulate the ground floor throughout the building a further
5,300 m2 of Kingspan Kooltherm® K3 Floorboard was installed.
Kingspan Insulation has now released Kingspan Kooltherm® K103
Floorboard as part of its Kingspan Kooltherm® K100 range of premium
performance insulation boards, offering a thermal conductivity of just
0.018 W/m.K across all board thicknesses.
As part of the project’s BREEAM commitments, considerable care was
taken to ensure the materials specified met the highest standards in
responsible sourcing. All three Kingspan Insulation products installed
at the museum have been assigned the highest possible BRE Green
Guide Summary Rating of A+. The insulated boards, manufactured at
Kingspan’s facilities in Herefordshire and North Yorkshire, are also
certified as ‘Excellent’ under the demanding BES 6001 Responsible
Sourcing Standard. As a result, they contributed toward the award
of credits within the Materials section of the building’s BREEAM
assessment.
LOCATIONDundee
ARCHITECTKengo Kuma & Associates
PRODUCTKingspan Thermataper® TT46 LPC/FM | Kingspan Thermaroof® TR26 LPC/FM
MAIN CONTRACTOR BAM Construct UK
PROJECT FACTS
The building, rated ‘Excellent’ at its design stage BREEAM assessment, combines
renewable energy generating technologies with a highly insulated construction.
Roof and floor insulation products from Kingspan
Insulation have been installed as part of the iconic
building envelope for Scotland’s first museum of design.
Photography: Ross Fraser McLean
06 07
Raising the barON COMPLIANCE
DOMESTIC BUILDINGS:
Whilst the rest of the country may be satisfied with
meeting current regulations, London is leading
the way on developing and delivering low carbon
buildings. Thanks to the Localism Act 2011, London
is able to raise the bar on what it expects of its
buildings. So what exactly is the ‘London Plan’?
The London Plan is a spatial development strategy
for the Greater London area. It was originally
published on 10th February 2004, and the latest
version was released in 2016. Each mayor of London
has the ability to adjust the plan, which arguably
gives London a greater opportunity to move the
goal posts as and when required. This is crucial
given the London Plan is scheduled to continue until
2036. It’s difficult to imagine what kind of targets
we will be facing then.
The London Plan has three main themes; here we
are going to focus on carbon targets. As part of the
plan, national targets as set by Part L must be met,
but then major developments (10 or more dwellings
or sites greater than 0.5 hectares) must push
beyond to achieve a carbon target of 35% over Part
L 2013 (the same as 40% over Part L 2010). If we
are to break it down, the targets are as follows.
NON-DOMESTIC BUILDINGS:
A CITY THAT BECOMES A WORLD LEADER IN IMPROVING THE ENVIRONMENT LOCALLY AND GLOBALLY, TAKING THE LEAD IN TACKLING CLIMATE CHANGE, REDUCING POLLUTION, DEVELOPING A LOW CARBON ECONOMY, CONSUMING FEWER RESOURCES AND USING THEM MORE EFFECTIVELY
LONDON PLAN
the costs of more efficient construction methods.
This will be reflected in future updates
to the London Plan. There is a caveat however,
that where it is clearly demonstrated that the
specific targets cannot be fully achieved on-site,
any shortfall may be provided off-site or through
a cash in lieu contribution to the relevant borough
to be ring fenced to secure delivery of carbon
dioxide savings elsewhere.
Finally for new homes (and for new non-domestic
buildings after 2019), there is a requirement to
offset any remaining emissions to zero carbon,
at an agreed cash in lieu rate to offset remaining
emissions to zero carbon (you could choose to
go further on-site to reduce this contribution
however).
Already 30 – 40 thousand new homes per year
have been built under the plan. However it is
estimated that 66,000 new homes per year are
actually needed. Therefore it is more important
than ever to look for solutions to ease compliance.
Products with a lower-lambda can provide
solutions to achieve compliance comfortably and
within the tight spaces that London often affords.
The Kingspan Kooltherm K100 range products
achieve a lambda value of only 0.018 W/m.K, across
all thicknesses, and are available for roofs, walls
and floors.
With London leading the way, it begs the question -
when is everyone else going to catch up?
Crucially all developments must
comply with Part L through energy
efficiency measures alone (i.e. using
a fabric approach to reduce heating
demand). This is notable as it means
developers must put extra thought
into not only the energy efficiency
solutions on their build, but also
the building envelope itself.
In the latest draft Plan, the document
notes that:
“Developments are expected to
achieve carbon reductions beyond part
L from energy efficiency measures
alone to reduce energy demand as far
as possible. Residential development
should aim to achieve 10 per cent and
non-residential development should
aim to achieve 15 per cent over part L.”
The Draft London Plan December 2017, Section 9.2.6
Additionally, to meet the current zero-
carbon target, an on-site reduction
of at least 35% beyond the baseline
of Part L of the current Building
Regulations is required; this can come
from a combination of improved fabric,
decentralised energy and heating
and / or on-site renewable energy
technologies.
The minimum on-site improvement
target over the Target Emission Rate
(TER) will increase over a period of
time in order to achieve the zero-
carbon London ambition and reflect
YEARIMPROVEMENT ON 2010 BUILDING REGULATIONS
2010 – 2013 25% (CODE FOR SUSTAINABLE HOMES)
2013 – 2016 40%
2016 – 2031 ZERO CARBON
YEARIMPROVEMENT ON 2010 BUILDING REGULATIONS
2010 – 2013 25%
2013 – 2016 40%
2016 – 2019 AS PER BUILDING REGULATIONS REQUIREMENTS
LONDON IS LEADING THE WAY ON DEVELOPING AND DELIVERING LOW CARBON BUILDINGS.
08 09
ScottishSchool inINSULATIONFIRSTA high specification primary school features the first application of a pioneering insulation solution.
PROJECT FACTSLOCATION Perthshire
PRODUCTS Kingspan Roofing System
CLIENT/BUILDING OWNER Perth & Kinross Council
ARCHITECT Norr Architects
MAIN CONTRACTORRobertson Tayside
A primary school in Perthshire has become the first building in the UK to benefit from the outstanding thermal performance of Kingspan Insulation’s
Roofing System.
Tulloch Primary School has been rebuilt on the site of its predecessor
by Robertson Tayside. The £11 million facility, commissioned by Perth
& Kinross Council, provides space for 434 pupils along with a new
nursery for 50 children and is expected to achieve a BREEAM rating
of ‘Excellent’. Norr Architects designed the scheme to deliver the
best whole life value, prioritising passive design principles and energy
demand reduction measures ahead of complex and costly renewable
energy technologies.
The new school building includes a large roof terrace which adjoins
the main staff room. To maintain level access to this area, whilst also
meeting the project’s demanding U-value requirements, the project
team needed an ultra-slim, optimum performance insulation product.
The solution was the all new Kingspan Roofing System.
Kingspan is the latest evolution in vacuum insulation
technology. It comprises a Kingspan panel encapsulated
within a high performance PIR insulation board, delivering a thermal
conductivity of 0.009 W/m.K — up to three times better than
commonly used insulation materials.
The product’s robust envelope provided complete protection for the
vacuum insulation core during the installation, allowing the site team
to quickly fit the 80 mm thick panels. flex infill strips of
the same thickness were then cut to size and fitted around the outer
perimeter of the balcony and around a central drainage penetration.
Kingspan Insulation’s specialist design team created
a tailored layout for the Kingspan roofing system.
This ensured the best possible ratio of Kingspan panels
to flex infill strips, allowing the target U-value to be met
with a minimal construction depth.
To maintain level access to this area, whilst also meeting the project’s demanding
U-value requirements, the project team needed an ultra-slim, optimum
performance insulation product.
CASE STUDY
10 11
As a global leader in the construction business, Kingspan
is always looking to the future and new trends in the
industry. With our world becoming increasingly more
reliant on digital technologies, it is essential that the
construction industry embraces the advantages these
offer. While self-building drones and 3D printed
buildings might not be a reality just yet, construction
professionals, engineers and architects are already
able to use intelligent 3D models when designing
and constructing. All of this is achieved through
Building Information Modelling, or BIM for short.
WHAT IS BIM?BIM enables various stakeholders in the construction
industry to collaboratively work on the same project
thus producing a more coherent and detailed
finalised project plan. Working together also
prevents large teams making conflicting design
decisions and promotes building safety.
BIM allows them to jointly manage the
construction process as well as the building
and all of its contents across the building’s
complete lifecycle. This is achieved by
the BIM output - essentially a building’s
data rich digital twin which can be
consulted at any time, allowing
for repairs, refurbishment
and ultimately optimised
demolition.
Future Now: BIM
Every year Kingspan Insulation produces a Sustainability & Responsibility
report and the most recent one has been available on our website for
a few months now. The report covers everything from turnover and
charitable contributions to water management and biodiversity. In case
you don’t have time to read it from cover to cover we thought we would
share some highlights over the next few editions of Insulation Insight.
Waste management -
SUSTAINABILITY IS OUR RESPONSIBILITY
WHY IS BIM IMPORTANT?As of April 2016, UK government
mandated that all centrally funded work
must implement BIM on Level 2. Although
the mandate currently only applies to
government funded projects, it is already
being used on other projects and it is likely
that building information modelling will become
a requirement on all construction projects.
As a company, we firmly believe the construction
industry is on the cusp of change, with BIM firmly
leading the way forwards. That is why Kingspan Group
has acquired a minority stake in the BIM business Invicara,
the creator of BIM Assure, which is based in US, Ireland
and Singapore. With this investment, we commit to the
development of a solution for digitalisation of the
construction industry.
Whilst construction firms can return
the waste back to us, the first step
according to the waste hierarchy should
be ‘prevention’, therefore we’ve made
adjustments to the packaging process which
has allowed us to reduce the amount of shrink-
wrap we use by approximately 25%.
Focusing on the whole life cycle of a building, just
as we do for our life cycle analysis for our products,
is an excellent circular approach to reducing waste and
means we optimise our resource use, benefitting the
consumer, the environment and the business.
To find out more about what Kingspan Insulation
does to reduce our waste, or to read the full report,
please visit the Sustainability pages on the website,
www.kingspaninsulation.co.uk/sustainability
PREVENTION
MINIMISATION
REUSE
RECYCLING
ENERGY RECOVERY
DISPOSAL
MOST PREFERRED
OPTION
LEASTFAVOURED
OPTION
To learn more about BIM, look out for a new series of articles on our website:
kingspaninsulation.co.uk/bim
One of Kingspan Insulation’s biggest success stories is waste,
specifically how we manage it and what we do with it. Some
standouts from our waste management are a Waste Take
Back Scheme, contracts with waste removal firms which
have a 98% landfill avoidance and well-trodden paths to
Waste to Energy (WTE) and downcycling.
The Pembridge and Selby sites have a working target
of 95% landfill avoidance using the principles reduce,
reuse, recycle.
Currently the UK construction industry is responsible
for 32% of the UK’s annual landfill waste – this is
made even more significant when you factor in that
waste on site can account for 2-3% of the total
construction budget - a huge cost for both the
environment and the industry.
CURRENTLY THE UK CONSTRUCTION INDUSTRY IS RESPONSIBLE FOR 32% OF THE UK’S ANNUAL LANDFILL WASTE
12 13
KINGSPAN TEK is light on its feet at safari park
The Kingspan TEK® Building
System has been erected
at West Midland Safari
Park to provide research
and educational space,
with minimal impact
on the site, due to the
lightweight system.
PHOTOGRAPHY: WEST MIDLAND SAFARI PARK
The entire building
envelope was manufactured off-site and
transported to the park then craned into
position above screw pile foundations.
Mike Fleming, Director from Glosford
SIPS, added:
“With the installation having to be
completed during the closed season, there
had to be a quick turnaround. We have had
lots of experience working with Kingspan
though and the system is really quick - the
entire envelope was up in two weeks! We
also really enjoyed working alongside the
Safari Park construction team and the wild
animals too.”
Following this, the Kingspan TEK® panels
were clad with cedar and African art panels
on the walls and dark green corrugated tin
sheeting on the mono pitched roof, to blend
in with the landscape and fit the aesthetic
of the park. With the roof panels being
light, there was also less structural stress.
By erecting a Kingspan TEK® Building
System envelope, the project could
accomplish excellent levels of thermal
performance by achieving U-values of
0.20 W/m2.K or better for the walls and
roof. The insulated spline jointing detail, in
combination with its OSB/3 facing bonded
to a highly insulated core, ensured minimal
thermal bridging through the insulation
layer and resulted in a very airtight building
shell which offered air permeability of less
than 1 m3/hr.m2 at 50 Pa. Once the system
was sealed with a breather membrane, the
entire structure is watertight.
The manufacturing facility where the
panels are produced carries both FSC®
(FSC®-C109304) and PEFC Chain of
Custody certification. As standard, the
OSB/3 facing of all Kingspan TEK® panels
is PEFC certified.
THE Kingspan TEK® BUILDING SYSTEM OF STRUCTURAL INSULATED PANELS (SIPS) WERE ERECTED IN JUST TWO WEEKS TO ENSURE THE SMOKEHOUSE BBQ WAS RESTAURANT-READY FOR EASTER.
The 250-acre landscaped park in Bewdley, Worcestershire
has continued to increase its purpose-built space to meet
the growing interest in animal conservation and study. It is
estimated that the site receives up to 46,000 school children
per year from more than 1,000 schools across the UK, who
come to learn about wildlife and take part in activities.
500 m2 of the Kingspan TEK® Building System in a 142 mm
thickness were pre-cut to specification by delivery partners,
Glosford SIPS.
Richard Painter, Director of Painter Architects Ltd, explains
the specification of the Kingspan TEK® Building System for
the building envelope:
“We needed to provide large teaching spaces within a quick
construction period that would leave no footprint on the land
if it was returned to grazing land in the future. The Kingspan
TEK® Building System was an obvious choice as it is low
maintenance and lightweight. It also provided a well-insulated
structure to help us meet Simplified Building Energy Model
(SBEM) compliance.”
14 15
CAMBRIDGE DELVES DEEPER WITH NEW RESEARCH CENTRE
News from
KINGSPAN
Kingspan Kooltherm’s FM Pipe
Insulation has been installed on
the University of Cambridge’s
centrepiece for industrial
partnership with the physical
sciences and engineering.
The £26 million Maxwell
Centre, opened in 2016,
achieved credits towards
a BREEAM ‘Excellent’
rating thanks in part
to the Kingspan
Kooltherm FM
Pipe Insulation
that was
specified for
the project.
The £26 million Maxwell Centre, opened in 2016,
achieved credits towards a BREEAM ‘Excellent’ rating
thanks in part to the Kingspan Kooltherm FM Pipe
Insulation that was specified for the project.
The Maxwell Centre objectives are to carry out world-leading research
in the physical sciences, developed from both near-term but also long-
term industry objectives. The 5,000 m2 centre houses a pioneering
research facility that focuses on a range of areas, including scientific
computing, condensed matter, advanced materials, and the physics of
biology and medicine.
Contractors, Kershaw Mechanical Services, discussed the specification
of Kingspan Kooltherm FM Pipe Insulation on the project:
“The high specification mechanical works include new low temperature
hot water and processed chilled water systems, which required
insulation with exceptional thermal performance. Kingspan Kooltherm
FM Pipe Insulation was used on a previous project at the university,
with established reliability, resulting in its specification for the Maxwell
Centre’s hot and cold water pipework networks throughout the
development.”
10,000 m2 Kingspan Kooltherm FM Pipe Insulation has been installed
on the building. The product offers superior thermal performance, and
comprises a fibre-free phenolic insulation core, externally faced with
an aluminium vapour barrier foil.
M&E consultants, KJ TAIT Engineers, added:
“The product’s fibre-free insulation core delivers outstanding energy
performance, with thermal conductivities as low as 0.025 W/m∙K.
Kingspan Kooltherm FM Pipe Insulation is
Class 0 as defined by Building Regulations,
has a BRE Green Guide A+ rating, and is
manufactured under a BS EN ISO 14001:
2004 scheme. It has also been awarded
a best-in-class Eurofins Indoor Air
Comfort Gold certificate, recognising it as
outstanding material according to the VOC
Indoor Air Quality emissions standards.
With Kingspan Industrial Insulation’s free
Pipeline Technical Advisory Service, which
can be contacted on 0808 168 7363, clear
advice and guidance can be accessed at
every stage in a project. They also have
Premier and Premier Plus Services which
support purchases of Kingspan Kooltherm
FM Pipe Insulation and the Kooltherm
FM Complete Pipe Insulation System
(incorporating insulated pipe support
inserts and fire sleeves).
This allowed the desired thermal
performance to be achieved with
the slimmest possible solution,
saving vital service space whilst
contributing towards the energy
requirements of the BREEAM
Assessment. In addition to
guaranteeing a constant high
energy performance, the system
will also help to keep the long-term
energy costs of the building to a
minimum.”
16 17
KingspanVOICES
Tell us a bit about how you came to work for Kingspan Insulation?
I came to cover maternity leave for Sharon
Howarth 22 years ago and never left. I
started in administration, then went on to
Sales where I became a team leader and for
the last 15 years (ish) have been the Sales
Office Manager. I have seen a lot of changes
and growth within Kingspan but due to
the hard work and dedication of so many
employees, whatever is thrown at us we
endeavour to make the best of it - it’s all in
the ground work. It’s very much like a family
here, that’s how I see it anyway. We work hard
and we play hard together.
Talk us through your average day?
I’m a working mum of three beautiful children,
every hour of the day counts. My day starts
at 4.30am, my alarm goes off, I go to the gym
and am back home for 6.30am. Every day is
different, although I have my daily, weekly
and monthly reports, there’s always those
unexpected issues that get put in your path;
the bad weather where deliveries can’t be made
etc… all situations need to be dealt with and
resolved. I hope this is where all my years of
experience comes in, no faffing around, you just
deal with things when they occur.
You’ve been with Kingspan for a fair amount of time, what are some of the biggest / greatest changes you have witnessed?
As a company we are ever evolving. The work
that goes on behind the scenes never stops,
the new products, always being one step ahead
in the market place, the brain work behind
Kingspan is inspirational. Personally, I welcome
change, it’s good to change things up and re-
evaluate what is sometimes a stagnant situation.
What’s your favourite movie or T.V. series?
It has to be Grey’s Anatomy. I’ve been watching
it for years and just love the interaction between
all the characters. It’s the sort of series that
leaves me feeling like I could be a surgeon.
If you could live anywhere in the world where would it be and why?
I love Hereford! If I were to move, it would be
maybe when I retire, somewhere hot and by
the sea, somewhere like Spain. I am very family
orientated though so somewhere not too far
away from home.
Other than your current role what is your dream job?
I would obviously be in my own West End
production and very famous! Having said
that, I’ve not been blessed with a good voice,
so maybe I’d be a midwife to help and assist
bringing new life into the world. To help and
guide someone when they are at their most
vulnerable, I think, would be very rewarding.
What’s been your greatest achievement in life so far (work / non-work related?)
Without question my three, although slightly
crazy, very beautiful children. At 8, 6 and 5 they
certainly keep me on my toes and very active.
It’s so wonderful to see them learn and grow.
Renovating a house from 1887 whilst living with
three small children was a tremendous amount
of hard work but also a huge achievement,
especially as it gave my children the space
they will need the older they get.
Who has been your greatest inspiration and why?
My dad…he always worked hard and showed his children how
working hard gave great rewards. He was very hands on as a Dad
and Grandad to my children. He was funny, kind and there was
certainly never a dull moment when he was about. What a man,
what an inspiration!
What is the most challenging and rewarding part of your job?
I’d have to say giving appraisals. It’s so important to me that
I get the very best out of my team, it’s equally as important
that I understand how each person is best communicated with.
As someone who is generally very black and white, I’ve learnt
to adapt my approach and the way I speak to different people.
Appraisals are their time, it’s my job to show them they’re worth
that time and fulfil their needs.
Where do you see yourself in 5-10 years’ time?
Still working at Kingspan! That’s the beauty of working here, you
never know what is round the corner. I am keen to move forward
and would love to have new strings to my bow, but I love my job and
wouldn’t want to disrespect that nor demand the world either…I’m
willing to try anything that is asked of me. TODAY WE HEAR FROM ONE OF KINGSPAN INSULATION’S SALES OFFICE MANAGERS, RUTH KILMINSTER.
IT’S VERY MUCH LIKE A FAMILY HERE, THAT’S HOW I SEE IT ANYWAY. WE WORK HARD AND WE PLAY HARD TOGETHER.
KINGSPAN INSULATION
INSIGHT
18 19
Run in the week before the Bank Holiday
Fair at Court of Noke, Staunton on Arrow,
the ‘Schools’ Days’ offered opportunities
for young people to have fun and enjoy
many activities together, whilst also
learning more about their impact on the
world around them. The gatherings were
designed to encourage participation in
a range of pursuits including traditional
crafts, new technologies and
creative writing.
CHAMPIONS CHANGESpring Greens fair
A grant from the Kingspan Insulation Community Trust has helped to promote conservation,
environmental protection and biodiversity at Spring Greens Fair’s ‘Schools’ Days’.
YOUNG PEOPLE IN NORTH-WEST HEREFORDSHIRE EXPANDED THEIR KNOWLEDGE OF CONSERVATION, ENVIRONMENTAL PROTECTION AND BIODIVERSITY AT THE 2017 SPRING GREENS FAIR’S ‘SCHOOLS’ DAYS’ EVENT, ORGANISED WITH THE HELP OF FUNDING FROM THE KINGSPAN INSULATION COMMUNITY TRUST.
Richie Cotterill, from Spring Greens Fair, commented on the project:
“Harnessing the imagination and energy of children is a vital component of
a sustainable future for us all. The ‘Schools’ Days’ combined experiences
of ecology with social skills that fit numerous curriculum requirements
through the Eco-Schools Agenda. We provide a co-operative experience
for the next generation of local wildlife champions; working together,
developing understandings and even friendships.”
Funding from the Kingspan Insulation Community Trust has helped towards
increasing its ‘Schools’ Day’ offering, helping to meet growing interest in
solutions for current global and national environmental concerns. £1,950
was awarded to help cover co-ordinators and co-ordination fees, workshop
leaders’ fees and expenses, along with some equipment and materials.
By using practical and creative approaches, Spring Greens Fair is
better able to address subjects such as energy efficiency and alternative
building techniques in a way that it is accessible and engaging for all ages
and abilities, with the days offering lots of hands-on experiences for
those attending.
Chairman of the Kingspan Insulation Community Trust, John Garbutt, adds:
“The Trust loves to support projects like the Spring Greens Fair. With the
grant it can reach more of our young people who will learn about how
they can be actively involved in making improvements in energy efficiency,
CO2 emission reductions, habitat enhancement, water conservation and
transport options at school or home.”
Anyone within the catchment areas of Wigmore High School, Lady Hawkins’
School, Earl Mortimer College in Herefordshire and Tenbury High Ormiston
Academy in Worcestershire, and the Parish of Sherburn-in-Elmet in
North Yorkshire is able to apply for funding from the Kingspan Insulation
Community Trust. Projects requiring funding must meet at least one of the
Trust’s four objectives which cover conservation, encouraging biodiversity,
health and fitness of young people, and road safety. There is no limit to the
number of applications that can be submitted.
Harnessing the imagination and energy of children is a vital component of a sustainable future for us all.
APPLICATION FORMS, AND DETAILS OF OTHER LOCAL PROJECTS INVOLVING THE TRUST, CAN BE VIEWED ON THE WEBSITE: WWW.KINGSPANINSULATIONCOMMUNITYTRUST.ORG
20 21
Enjoyed this issue and want to receive the next? Visit our website to request a free printed copy of Insulation Insight or download the PDF; www.kingspaninsulation.co.uk/magazine.
General Enquiries and Literature If you are interested in receiving literature about any of the products mentioned in this magazine, or any Kingspan Insulation products please contact us, using the details below;
Tel: +44 (0) 1544 388 601 Fax: +44 (0) 1544 388 888 Email: [email protected]
Technical We also support all of our products with a comprehensive Technical Advisory Service for specifiers, stockists and contractors. Simply phone the Kingspan Insulation Technical Service Department with your project specification.
Tel: +44 (0) 1544 387 382 Fax: +44 (0) 1544 387 482 Email: [email protected]
Interested in professional
development…?
We have a great range of free CPDs
available. In order to book on to
one simply email presentations@
kingspaninsulation.co.uk with your
preferred date and start time and we
will be delighted to deliver a CPD at
your work. The following CPDs are
currently available to attend;
FEATURED HOW TO ANIMATION
Take a look at how to install Kingspan
Kooltherm® K108 Cavity Board using our
online video...
Once you’ve finished, don’t forget to test
you’ve understood everything with our quiz!
Find more information atwww.kingspaninsulation.co.uk/insight
Here you will find everything from courses, to learn in-depth about
industry topics, to how to videos, which give guidance on how to
install Kingspan Insulation products correctly.
COURSESIn a rush? Don’t worry – save your progress after each module
and continue where you left off next time!
BUILDING REGULATIONS AND STANDARDSEstimated time: 3 hours
Modules: 6
Most building work requires Building Regulation approval in the
UK, but there are separate regulations for England, Wales and
Scotland. This course looks in depth at the Building Regulations
and Standards across all three countries for domestic and non-
domestic scenarios.
THE REAL VALUE OF SPACEEstimated time: 2 hours
Modules: 4
In an ever expanding and advancing world, ‘space’ can be
hard to come by, and in the construction industry, space is
at a premium now more than ever. This course helps you
understand how space can unlock investment opportunities.
FLAT ROOFING AND TAPERED INSULATIONEstimated time: 3 hours
Modules: 6
In this course, we take a look at the different types of flat roof
constructions and the Building Regulations that govern them in
England, Wales and Scotland. You’ll learn about different deck
types, waterproofing systems and ways of creating a fall.
We’ll then take a look at some cost analysis into different
ways of creating a fall for flat roof drainage.
KINGSPAN INSIGHT IS THE NEW NAME FOR KINGSPAN INSULATION’S ONLINE KNOWLEDGE BASE. IT IS YOUR ONE STOP SOURCE OF KNOWLEDGE FOR ALL THINGS INSULATION.
Our InsightYOUR SPACE
ChooseYOUR CPD
Kingspan Kooltherm® K100 Range Phenolic Insulation (30 mins) An overview of phenolic insulation examining the benefits of thinner insulation, the different applications available and other design considerations.
Façades & Fire Safety: Choosing the Right Route to Compliance (45 mins) Learn about the misconceptions that surround the use of insulation in rainscreen and masonry façades. This CPD will simplify the complexities to help you choose the right route to compliance.
RIBA Accredited: Flat & Tapered Roofing (45 mins) An overview of warm, cold, and inverted flat & tapered roofs. Also examines types of deck, waterproofing options, structures, drainage and insulation.
Structural Insulated Panels (45 mins) Learn how Structural Insulated Panels (SIPs) can provide an energy efficient solution through low U-values, excellent air tightness and low thermal bridging.
Vacuum Insulation (45 mins) With an insulating performance up to five times better than commonly used insulation materials, discover how vacuum insulation can solve the problems of limited space.
Pre-Insulated Ductwork (45 mins) Explore both the practical and performance benefits of pre-insulated ductwork in terms of air-leakage, energy usage, CO
2
emissions, embodied environmental impact and associated costs - capital, operational and whole life.
Scottish Section 6 & 7: Non-Domestic (30 mins) Examining the changes to the new building standards in Scotland for non-domestic buildings.
Building Regulations (England) (45 mins) Learn about the Part L of the English Building Regulations, changes and solutions on how to meet the new requirements.
Scottish Section 6 & 7: Domestic (30 mins) An overview of the changes to the new building standards in Scotland including U-value updates; new thermal bridging rules; Silver, Gold and Platinum examples using SAP 2012.
22 23
Kingspan Insulation Limited Pembridge, Leominster, Herefordshire HR6 9LA, UK
www.kingspaninsulation.co.uk
® Kingspan, KoolDuct, Kooltherm, OPTIM-R, Styrozone, TEK, Thermataper and the Lion Device are Registered
Trademarks of the Kingspan Group plc in the UK and other countries. All rights reserved.
Kingspan Insulation Ltd. Registered in England & Wales, No. 01882722.
Registered Office: Pembridge, Leominster, Herefordshire HR6 9LA UK.