spega e.control functions 2012
DESCRIPTION
spega e.control function overviewTRANSCRIPT
e.control™Function overview
2012/2013
11
e.controlTM - unlimited functionality
Due to the significance of automation for the energy efficiency, economy and ergonom-ics of a building, a new planning approach is needed which starts with the definition of the functionality within the room. With directive 3813 the VDI (German Associa-tion of Engineers) published, for the first time anywhere in the world, the methods required for the clear and comprehensive planning of room automation functions. It helps the technical planner to specify the requirements and the installer to implement them. Applied consistently, they offer the advantage that the complex, system-wide functionality of a highly efficient room automation system such as that required, for example, by efficiency class A of EN 15232, can be described in precise detail. Assuming that suitable systems are in place, this means for the installer that the com-missioning is simpler and the subsequent building operation can be transparently and flexibly adapted for the user.
VDI 3813 describes how to deal in principle with flexible-axis buildings using segmentation as well as describing over 45 detailed functions connected to lighting, sunblind as well as HVAC systems and the necessary exchange of information between them. Industry-standard aids such as automation diagrams and function lists adapted for the directive are used for descriptive purposes.
As one of the first room automation systems, e.control is best prepared for the direc-tive. The modular design of the M-series, for example, supports the concept of the segment and room-oriented automation of flexible buildings without having to make any compromises whatsoever. Furthermore, e.control is probably the first system to offer the entire functional scope in accord-ance with VDI 3813. For this the LonMark functional objects of the e.control system were adapted such that they covered the functional definitions of VDI 3813 as far as possible. In this way it is possible to integrate the technologically-independent functional definitions of the planning stage on a one-to-one basis into the project plan-ning for the e.control system. Adaptations or programming are therefore done away with completely, thereby ensuring reliable opera-tion with full functional scope for the user.
Automation diagram of a constant light control system to VDI 3813
Implementation of the constant light control system with e.control functional profiles
e.co
ntro
l fun
ctio
nal p
rofil
es fu
lly m
eet t
he fu
nctio
nal s
cope
of V
DI 3
813
14 www.spega.com
e.controlTM – lighting functions
VDI 3813 Function
Operator functionsActuate LightSelect room utilisation*Signal presenceSensor functionsPresence detectionBrightness (indoor)Actuator functionsLight actuator (switched)Light actuator (dimmed)Application functionsOccupancy evaluationControl via room util .**Light controlStairwell light controlAutomatic lightsDaylight-dependend lightsConstant-light controlTwilight control
dialog Web
dialog 1
dialog 8
nova/climaLCD/RCM
nova TSlumina T6
EN 15232C B A
< only for rooms without sufficient daylight provision (e.g. corridors)
< only for occationally used rooms with daylight provision ( e.g. archives)
< for all rooms with daylight provision (e.g. offices, class rooms)
* Recall or learn scenes ** Scene memory
LON
Automatic occupancy detection and meas-urement of the light in a room are essential for energy-efficient buildings of class A or B. Both functions are combined in the e.control multisensors which cover all applications with the LON interface and are available in various sizes.
e.control light actuators cover all lighting applications. Whether fluorescent lamps, high or low-voltage halogen or LED lamps, relays, dimmers, 1-10V interface or DALI, e.control always has the right actuator - it goes without saying that as energy-efficient solutions which comply with EN 15232 they are, of course, dimmable.
Operating functions
Actuator functions
Sensor functions
e.control offers numerous lighting control options: web services for browsers or IP telephones, touch panels or integrated room control devices. All of them allow the light-ing to be switched on/off and dimmed, scenes called up as well as log-on or log-off in the room.
The e.control occupancy evaluation system calculates from the presence detection and manual presence log-on systems the ap-plicable occupancy status of a room for all further application functions of the lighting, sunblind and room climate control systems..
Occupancy evaluation
e.controlTM functionalityLighting functions
tactio L
15
Dimming
luminaMS/RC
dialogRC-E
luminaMS3
ombraW2/W8
1 - 10 V
Relay
DALI
R series: actuators for distribution boards
M series: modular actuators
FastCon actuators
230V
The e.control automatic light is only acti-vated in hallways, sanitary facilities or stor-age rooms if human occupancy has been detected. This prevents energy being used for lighting unused rooms.
The daylight-dependend lighting is used if the dimming option cannot or must not be used for the lighting. Depending on the available daylight, artifi cial lighting is added – in up to 2 stages with e.control. An integrated learning function ensures that the lights are switched off again as soon there is suffi cient daylight.
Automatic lights Daylight-dependent lighting
The constant-light control system provides the best means of saving energy and is therefore a must for energy-effi cient build-ings of class A or B. In daylit rooms, only enough artifi cial light is added to maintain the required level of lighting. In large, low-level rooms with an uneven distribution of daylight, the e.control constant light control system even separates two groups of light-ing in order to ensure a uniform level of illumination. In this way, energy savings of up to 50% can be made.
Constant-light control
16 www.spega.com
e.controlTM – sunblind functions
As with the lighting, e.control also offers numerous control options for sunblinds: web services for browsers or IP telephones, touch panels or integrated room control devices. All allow for the positioning of the blind length and slat angle either directly or via scenarios.
Operating functions Slat tracking controlActuator functions
e.control actuators cover the entire range of sunblind systems, whether internal or external blinds, awnings, screens or roller shutters. All devices have a priority control function and support the e.control slat tracking controller including shadow correction. For especially demanding applications, e.control offers SMI actuators due to their high positioning accuracy.
For energy-efficient buildings, tracking the sun in accordance with its position is par-ticularly important for optimising daylight utilisation. The e.control ombra BST slat track-ing controller calculates in cycles the precise angle at which the supply of daylight is maximised despite the lack of glare and transmits this to the e.control sunblind actuators.
dialog 1
EN 15232C B A
VDI 3813 Function
Operator functionsActuate sunshadeSelect room utilisation*Signal presenceSensor functionsPresence detectionTemperature measurem .Brightness (outdoor)Wind velocity measurem .Precipitation detectionActuator functionsSunshade actuatorApplication functionsOccupancy evaluationControl via room util .**Priority controlAutomatic solar controlSlat tracking controlShadow correctionAutomatic thermal controlWeather protection
dialog 8
nova/climaLCD/RCM
nova TSlumina T6
dialog Web
* Recall or learn scenes ** Scene memory
In addition to occupancy detection, the calculation of the sun’s intensity and inside room temperature is also required for energy-efficient buildings of class A or B. e.control provides these values by means of multisensors, weather sensors and all room control devices.
Sensor functions
The e.control solar control system on the weather sensors evaluates the daylight on each façade and determines the limit value and delay at which a sunblind is moved into a defined position.
Automatic solar control
LON
e.controlTM functionalitySunblind functions
tactio L
17
Shadow correction
Each e.control sunblind actuator is able to calculate independently whether its blind is in the sun at any specifi c point in time or whether it is being shaded by buildings or parts of buildings. In periods of shading, therefore, the sunblind is set to maximum daylight provision in order again to improve daylight utilisation considerably.
Automatic thermal control
With the aid of the automatic thermal con-troller the intake of solar heat through the façade is controlled via the sunblind, thereby supporting the heating and cooling system. Whilst the intake of heat is welcome in spring, for example, it prevents unnecessary temper-ature rises in summer by closing the blind.
luminaMS/RC
dialogRC-E
SMI
luminaMS3
ombraW8
ombraW2
230 V AC
ombraBST
24 V DC
Weather protection control
The e.control weather protection control-ler protects external blinds from damage caused by wind, frost or rain. Various limit values can, of course, also be defi ned for different types of blind.
R series: actuators for distribution boards
M series: modular actuators
FastCon actuators
230V/24V DC
18 www.spega.com
e.controlTM - room climate control functions
With e.control you have total control over the desired room climate, either via web browser or IP telephone, touch panel or an integrated room control device. In all cases, it is possible to infl uence the setpoint value, fan setting and the outside air supply, if necessary.
In conjunction with the e.control time pro-grams, an start optimisation reduces thermal energy comsumption for individual rooms, such that each room can be heated at the latest possible time.
In addition to measuring the temperature by means of the e.control room control de-vices, an energy-effi cient building of class A also needs to know the occupancy status of the rooms. The values for this are provided by the e.control multisensors.
Operating functions
Start optimisation
Sensor functions
Actuator functions
e.control actuators cover all applications of air-conditioning technology. Whether they are for radiators, heating/cooling ceilings, fan coils or façade ventilation devices, e.control always has the suitable actuator. All offer sequence adjustment, value limit-ing as well as a valve opening function for longer periods of non-use.
Energy mode selection
EN 15232C B A
dialog 1
VDI 3813 Function
Operator functionsAdjust temp . setpointActuate fan/windowSignal presenceSensor functionsPresence detectionTemperature measurem .Actuator functionsActuator (valves, dampers)Actuator (fans)Application functionsOccupancy evaluationEnergy mode selectionStart optimisationSetpoint calculationFunction selectionTemperature controlFan ControlAir quality controlNight-time coolingSequence controlValue limitingLoad optimisation
dialog 8
nova/climaRCM/RO
nova/climaLCD
dialog Web
* only nova/clima RCM
are equipped with 4 energy modes which have different setpoints for heating and cooling respectively.
The level of energy effi ciency can be in-creased considerably by adjusting the room temperature to the room occupancy. To this end, all e.control room climate controllers
LON
e.controlTM functionalityRoom climate control functions
tactio L
19
In addition to individual setpoint shifts by the user, e.control room climate controllers also provide summer/winter compensation in the event of high/low outside tempera-tures. The control response can be com-pletely parameterised by the user.
Setpoint calculation
In addition to the room temperature control function with PI algorithm, e.control room climate controllers also offer the room sup-ply air cascade control function for fan coils with outside air fl ap.
Temperature control
Night-time cooling
Load optimisation
The e.control room climate controllers support the primary system control in optimising the energy supply through the e.control load optimization function. For this, each controller sends its current load to an evaluating logic (in the sistema RC2), which in turn informs the DDC control system as to whether and how the inlet temperature needs to be adjusted to the heating and/or cooling requirements.
luminaMS/RC
dialogRC-E
Multi-stage
luminaMS3
ombraW2/W8
sistemaRC2
0-10V
MP-Bus
PWM/3-point
All e.control controllers can – depending on the heating/cooling system – be operated in the heating, cooling, automatic, pre-cool-ing and night cooling functions. Switch-over can be performed either via a time program, the building management system or automati-cally via the controller.
Function selectionAll e.control room climate controllers can be switched to the night-time cooling function. Each controller then independently decides on when the night cooling begins and ends, depending on the outside and inside temperature. In addition to outside air fan coils, motorised windows can also be used for ventilation purposes.
R series: actuators for distribution boards
M series: modular actuators
clima FCB
24V/230V
spelsberggebäudeautomation gmbhzechenstr . 7047443 moers germanyfon: +49 (2841) 88049-0fax: +49 (2841) 88049-49e-mail: info@spega .cominternet: www .spega .com