specs - gas oil – l-0.02-62 gost 305-82 - sandcastle energysandcastleenergy.com/specs - d2 - gas...

1
© 2014 Sandcastle Energy, LLC. All Rights Reserved. Specifications Gas Oil – L-0.02-62 GOST 305-82 No. INDICES OF QUALITY STANDARD ACCG. TO GOST 305-82 1. Cetane index, min 45 2. Fractional composition: - 50% is distilled under the temperature °C not more 280 - 96% is distilled under the temperature °C not more 360 3. Cinematic viscosity under 20° C cct 3.0-6.0 4. Solidification °C, max -10 5. Temperature of cloudiness °C, max - 5 6. Flash point in closed crusible, °C, min 62 7. Fraction of total mass of sulphur in per cents max 0.02 – 0.05 8. Fraction of total mass of mercaptane sulphur per cents max 0.01 (0,02 MAX.) 9. Content of hydrogen sulphide Is absent 10. Test on copper plate Passed 11. Content of water – soluble acid and alkali Is absent 12. Content of actual tar mg on 100 cm!, of fuel, max 25 13. Content of water Is absent 14. Acidity mg KOH on 100 cm!, of fuel, max 5 15. Iodine index g of iodine on 100 g of fuel, max 5 16. Density at 20°C, kg/m!, max. 870

Upload: trinhtuong

Post on 25-May-2018

229 views

Category:

Documents


2 download

TRANSCRIPT

Page 1: Specs - Gas Oil – L-0.02-62 GOST 305-82 - Sandcastle Energysandcastleenergy.com/Specs - D2 - Gas Oil - L-0.02-62... ·  · 2014-12-10Title: Microsoft Word - Specs - Gas Oil –

© 2014 Sandcastle Energy, LLC. All Rights Reserved.

Specifications

Gas Oil – L-0.02-62 GOST 305-82

No. INDICES OF QUALITY STANDARD ACCG. TO GOST 305-82

1. Cetane index, min 45

2. Fractional composition:

- 50% is distilled under the temperature °C not more 280

- 96% is distilled under the temperature °C not more 360

3. Cinematic viscosity under 20° C cct 3.0-6.0

4. Solidification °C, max -10

5. Temperature of cloudiness °C, max - 5

6. Flash point in closed crusible, °C, min 62

7. Fraction of total mass of sulphur in per cents max 0.02 – 0.05

8. Fraction of total mass of mercaptane sulphur per cents max 0.01 (0,02 MAX.)

9. Content of hydrogen sulphide Is absent

10. Test on copper plate Passed

11. Content of water – soluble acid and alkali Is absent

12. Content of actual tar mg on 100 cm!, of fuel, max 25

13. Content of water Is absent

14. Acidity mg KOH on 100 cm!, of fuel, max 5

15. Iodine index g of iodine on 100 g of fuel, max 5

16. Density at 20°C, kg/m!, max. 870