specifications wireless alarm

AKINFEMI AKINYANJU ENTERPRISES NIGERIALagos Office: 238 Muritala Muhammad Way, Yaba Lagos.

Abuja Office: 1 Kandi Close, off Aminu Kano Crescent, Wuse II, Abuja.

Tel: 07042052121 & [email protected]

30th January, 2012

The Project Manager

-----------------------------

-----------------------------

-----------------------------

Dear Sir/Madam,

INTEGRATED WIRELESS SMOKE DETECTION AND SAFETY EQUIPMENT SYSTEMS.

We wish to introduce our services which consist of Wireless Smoke Detection and Alarm systems, Safety Equipment, Intruder Deterrence kits, etc for deployments at your existing and new offices.

When installing conventional hardwired systems, Multi-Family and Campus type facilities pose owners and installing contractors with several constraints not only with the initial installation but recurring costs as well.

Underground Shielded Link Cable (SLC) Loops, disruption to grounds and utilities are just a few of the examples of problems solved or eliminated by the Certified Wireless Safety Initiative (CWSI) System.

Installed in a fraction of the time, and at substantial cost savings, the proposed system is the perfect solution for these types of occupancies.

Talking Alarms Tell You Where the Danger is. Wireless alarms talk to each other and they talk to you! This is compared to stand-alone alarms which you may not easily hear if you are on the other side of your premises or in a noisy place.

mailto:[email protected]

http://www.aaenigeria.com/




Interconnectivity, Without the Wires! If you want the benefits of an integrated smoke and carbon monoxide alarm system, without the cost and hassle of retrofit wiring in your offices and homes, consider integrated wireless alarm systems.

Alarms communicate with each other wirelessly through integrated radio frequency. When one sounds, they all sound, providing a whole-home safety network! Wireless Technology - Uses radio frequency to both transmit and receive messages about a hazard in the home; when one alarm sounds, all will sound.

Battery Powered - Enables owners to install interconnected smoke alarms in existing properties without rewiring. Protects continuously, even during a long-term power outage.

Kindly find attached the product specifications for the integrated system for deployment in existing and new industrial, multi and single tenant premises.

We hope you will give us the opportunity to carry out pre-deployment surveys at your locations to determine the modalities and cost of the solution to your organisation.

We look forward to been of service to your firm in your completed, ongoing and future projects. Thanks for your anticipated patronage.

Yours truly,

Akinyanju A. Akinfemi






INDUSTRIAL and MULTI/SINGLE TENANT LONG RANGE WIRELESS MULTISENSOR SMOKE, FIRE AND EXPLOSIVE GAS DETECTION SYSTEM

WIRELESS SMOKE DETECTORS

Detectors are programmed for any zone between 1 to 999 nos. Each detector is attached with power radio emitter. So when ever detector becomes activated through smoke it sends radio waves to the panel. Panel display the same zone in which it has been programmed. Programmed zone can be changed to another zone if required .There is also an inbuilt hooter in the detectors as well as radio emitter. Each emitter is workable with call button (manual call point).

WIRELESS PANEL

Standard panels are 99 & 999 zone panels. Panel has ability to receive radio waves. It displays the zones whenever receive the signal from the detector. There is an inbuilt siren in the panel. Auto dialler is also the feature of this panel. It can save 4 telephone nos. and start dialling when ever it becomes activated.

MANUAL CALL POINT & EMITTER WITH HOOTER -

Radio emitter reads the separate zones of each detector lying at a distance of 85 feet and pushes the signal which is read by panel.

Manual call point can activate radio emitter. So as soon as emitter receives signal from the manual call point siren of 85 db starts and also emitter sends signal to the panel.

ALONG WITH SMOKE DETECTORS THERE IS THE OPTION TO INSTALL MAGNETIC SWITCH PIR SENSORS FOR SECURITY SYSTEM AND CCTV WITH THE SAME PANEL






999 & 99 ZONES WIRELESS CONTROL PANEL WITH INBUILT HOOTER PLUS RADIO EMITTER AND REMOTE

SPECIFICATIONS FOR INTELLIGENT WIRELESS CONTROL PANEL

Description: Wireless Control Panel Compatibility: All KARSAN radio emitter through radio wavesIndication: Alarm 105 db Principle Function: Displays different zones of smoke sensors transmitted by radio emitter. Operating voltage: 12 volts DC (Rechargeable batteries) two pin 5 Amp socket is required to be connected for charging Power Backup : 7 to 8 Hours Addressing method: Digital nos. display on screenEnvironmental Application: Indoor useConstruction Material: M S Body Colour: Silver/White/ Black

Warranty: 36 months from the date of installation. Spare Parts: Not Required

INTELLIGENT WIRELESS MULTISENSOR DETECTORS






SPECIFICATIONS FOR INTELLIGENT WIRELESS MULTISENSOR DETECTORS

Description: Multi sensor it has smoke and heat sensor, Wireless Rate of Rise Heat Sensor (models covers industrial, multi & single tenant properties) includes variants for explosive gases and water leakages.

Model No.: GB – 2688 Compatibility: All KARSAN analogue system through radio waves

Mounting: Plugs into surface base Monitoring: Continuously self checking

Indication: Alarm Addressing method: Unique address embedded in detectorDetection principle: Photo electric light scatter and Heat

Area Coverage (Max.) 40 SQ. MTR. WITH 10 FT HT. Operating voltage: 9 volts DC

Environmental Application: Indoor use Construction Material: Moulded ABS Colour: White Warranty: 36 months from the date of supply Spare Parts: Not Required






INTELLIGENT WIRELESS RADIO EMITTER CUM HOOTER

SPECIFICATION FOR INTELLIGENT WIRELESS RADIO EMITTER CUM HOOTER

Description: Wireless Hooter Compatibility: All KARSAN detectors & sensors through radio wavesMounting: Plugs into surface base Indication: Alarm 85 db Principle Function: Reads different zones of smoke sensors and push the signals so as to collect and read by wireless panel Operating voltage: 12 volts DC (Rechargeable Alkaline batteries) two pin 5 Amp socket is required to be connected and charging Power Backup : 6 Hours Addressing method: Unique address embedded in detectorEnvironmental Application: Indoor use Construction Material: Moulded ABSColour: White Warranty: 36 months. Spare Parts: Not Required






WIRELESS MANUAL CALL POINT

SPECIFICATIONS FOR WIRELESS MANUAL CALL POINT

Model No.: KS 10A Description: Wireless manual call point with lock / un-lock facility

Compatibility: All KARSAN radio transmitter through radio waves Mounting: Fix into moulded box

Indication: Red light at the time of activation Addressing method: Unique address embedded

Environmental Application: Indoor use Construction Material: Moulded ABS

Colour: Grey / Black Warranty: 36 months Spare Parts: Not Required






All products are manufactured to the Certified Wireless safety Initiative (CWSI) standards and also include the following proprietary technologies.

RF Interconnect: Reliable and secure radio frequency communication between alarms. 915 MHz frequency with 65,000 security codes and 3

channel frequency hopping.

Photoelectric Technology: Helps reduce nuisance alarms, especially around kitchens and baths which are more prone to nuisance alarms from

cooking smoke and shower steam.

Optipath 360 Technology: Patented technology provides 360 degrees access to the smoke sensor.

Spread Spectrum Horn Tone: Lower and varying horn frequency makes it easier for elderly with normal age related hearing loss to hear the horn.

Sweeps through the 2200 - 3400 Hz range.

Single Button Test/Silence: Eliminates confusion. Two silence features - temporarily silence low battery chirp for up to 8 hours before replacing

battery or silence unwanted alarm for several minutes.

Perfect Mount: mounting bracket keeps alarm secure over a wide rotation range to allow for perfect alignment.

Latching Features: Alarm Latch: easily identifies initiating alarm even after alarm condition is over. Low Battery Latch: Identifies which unit is in low

battery condition by a blinking light.



specifications wireless alarm

Documents