specifications for monorail wire rope hoist · imm building, singapore 609601. email:...
TRANSCRIPT
Monorail Wire Rope Hoist
Monorail Wire
Rope
Specifications for
Hoist
Yale Global King monorail wire rope hoists are built for the world market and combine over 130 years of experience with the latest in manufacturing and materials technology, rigid design standards and the best quality compo-nents available to create a feature-flled,rugged, easily maintained hoist line.All Yale Global King monorail hoists are metric capacity rated, low headroom, heavy-duty, built to meet and exceed either FEM 2m or 3m duty (similar to ASME H4 or H4+ duty) providing long life in heavy applications with the higher lifting speeds and precise positioningcontrol demanded by industry worldwide.
Global King
Rope drum deep-grooved with heavy-duty rope guide as standard.
Heavy-duty DC disc brake rated at 200% torque, provides quick, positive stops and load holding.
Motors designed and manufactured specifcally for hoisting service.
Steel compound tread wheels for long life and use on either wide-fange or “S” beams. One wheel on each side of trolley driven for positive tracking.
All controls housed in a NEMA 4/12 enclosure with easily accessible electrical components.
Triple reduction hoist gearing in an oil tight gear case.
Heavy steel frame provides a solid foundation and positive alignment of key components.
Low headroom design assures maximum hook travel.
Trolley is easily adjustable to handle a wide range of beam fange widths.
Upper/lower geared limit switch is standard for regulated load travel.
Two-speed hoist and trolley control for smooth acceleration and precise load positioning.
Low Headroom Design
Monorail Wire Rope Hoist
Monorail Wire
Rope
Specifications for
Hoist
STANDARD FEATURES
Triple reduction hoist gearing is oil bath lubricated, operating in an oil-tight, cast aluminum gear case. The gear case is conveniently located to allow ease of access in the air, while providing a low headroom design with maximum lift. The motor is two-speed with a 4:1 ratio from high to low speed; giving a low speed for precise load handling and a high speed for fast throughput.
HOIST GEAR CASE & MOTOR
The wire rope drum is machined from quality steel, deep-grooved with a rope guide to help ensure the rope stays in the grooves.
WIRE ROPE DRUM and ROPE GUIDE
Hoist is reeved to a low-headroom design lower block for minimum headroom and maximum lift. Wire rope is secured to the drum with three heavy ductile iron clamps and designed to have three extra wraps of wire rope on the drum with the rope at full extension (low hook).
DRUM, REEVING and LOWER BLOCK
Each hoist comes with a bearing mounted trunnion hook that rotates 360° and swings back and forth 180° for easier load adjustment.NOTE: Standard on 2 to 10 ton capacityhoists.
TRUNNION STYLEBLOCK AND HOOK
The hoist is provided with an upper/lower, geared control circuit hoist motion limit switch as standard. An additional block-operated upper control circuit limit switch is available as an option.
UPPER/LOWERGEARED LIMIT SWITCH
HOIST OVERCAPACITY LIMIT SWITCHA hoist overcapacity limit switch is pro-vided as standard to prevent lifting excessive overloads.
Two wheels are driven; one on each sideof the frame for maximum traction anduniform tracking. Traverse motor drives aright angle worm gear reducer for smoothstarting and stopping.
TROLLEY TRAVERSE DRIVE
Hoist and trolley controls are housed in a common NEMA 4/12 enclosure with the following features as standard:• Phase-loss detection/protection• Motor line fusing• Fused control circuit transformer• Hoist motion monitor• Motor thermal overloads• Hoist over capacity limit switch• All components are of the highest quality and the panel design meets National Electric Code (NEC).
CONTROL PANEL
Hoist Option• Mainline Contactor
Trolley Option• Variable Frequency Control• Trolley Brake• Drum Cover
Specifications model Global King monorail wire rope hoist
Global King Monorail
3.2 metric tons 7.5/10 metric tons
FEM 3m for 7.5tFEM 2m for 10tSimilar to ASMEH-4 - H4+ duty
Standard
Global King Monorail Wire Rope Hoist & Trolley
* All the speed data above is based on 50Hz. If rated power is 60Hz, the speed increases by 20%.** Beam flange width should be specified when ordering. Detailed size please refer to below table.
Total
Catalog No.Capacity
metric ton
Liftingheight
m
Speed*m/min
MotorkW
No. RopesSpeed*m/min
MotorkW
Beam Flange Range**
mm
Net Weightkg
315
360
315
360
405
473
788
855
788
855
GA3M02-020S20-2
GA3M02-040S20-2
GA3M03-020S20-2
GA3M03-040S20-2
GB3M05-025S20-2
GB3M05-040S20-2
GC3M07-025S20-2
GC3M07-040S20-2
GC3M10-025S20-2
GC3M10-040S20-2
2
2
3.2
3.2
5
5
7.5
7.5
10
10
6
12
6
12
7.5
12
7.5
12
7.5
12
5.0/1.2
5.0/1.2
5.0/1.2
5.0/1.2
5.0/1.2
5.0/1.2
5.0/1.2
5.0/1.2
5.0/1.2
5.0/1.2
3.7/0.9
3.7/0.9
3.7/0.9
3.7/0.9
5.6/1.4
5.6/1.4
11.1/2.8
11.1/2.8
11.1/2.8
11.1/2.8
4
4
4
4
4
4
4
4
4
4
23.0/7.6
23.0/7.6
23.0/7.6
23.0/7.6
23.0/7.6
23.0/7.6
24.4/8.2
24.4/8.2
24.4/8.2
24.4/8.2
0.37/0.12
0.37/0.12
0.37/0.12
0.37/0.12
0.56/0.19
0.56/0.19
0.75/0.25
0.75/0.25
0.75/0.25
0.75/0.25
83 - 355
83 - 355
83 - 355
83 - 355
117 -508
117 -508
152 - 660
152 - 660
152 - 660
152 - 660
5
Standard:Duty Class:
Power Supply:Control Voltage:
FEM2m* Working capacity reduces by 20%, duty class can be upgraded by 1 rating380V-3PH-50Hz, 415V-3PH-50Hz, 460V-3PH-60Hz 24V
TrolleyHoist
Monorail Trolley
Beam Flange Width (mm)
Capacity Base Trolley 1st Extension 2nd Extension 3rd Extension
2t
3.2t
5t
7.5t
10t
83
83
117 - 203
152 - 203
152 - 203
118 - 152
118 - 152
206 - 356
206 - 356
206 - 356
152 - 254
152 - 254
359 - 508
359 - 508
359 - 508
254 - 355
254 - 355
N/A
511 - 660
511 - 660
Dimensions Model Global King Monorail Wire Rope hoist
-524778140225238237575600
-725
106051
441611760108498
-532789143229302302616819
-765
110860
568741891133641
-532789143229302302616819
-765
110860
568741891133641
5t 7.5t 10t3.2t2tLift (ft)
561------
445508478
-82735
30859262378
351
561------
445508478
-82735
30859262378
351
20' 25' 40' 25' 40' 25' 40'
20' 25' 40'
E.min, mm E.max, mm F.min, mm F.max, mm G.min, mm G.max, mm
Global King Monorail Wire Rope Hoist
6
Model
367
343
152
66213
154
56
762 x 508 x 224
41
460
CB
641
575
178
WB
D51
152
359
152
540
56
305
4441
121
127
527
B
WB
359
C
D
270
464
610 x 406 x 173
102
35
41
117
473
295
121
48
159
A, mm
B, mm
C, mm
D, mm
BT.min, mm BT.max, mm
WB, mm
WHEEL BASE
(WB)
95
41
155
33
226
207
320
37
93
38
216
320
180
A
2t/3.2t monorail
5t monorail
7.5t/10t monorail
7
We offer Hoist Spare Parts Kit for your option.
1
2
3
4
5
6
7
8
Brake Friction Disc
Brake Control Module
Brake Hardware Kit
Contactors
Fuse
Transformer
Wire Rope Assembly
Rope Guide
Item Description
Global King Wire Rope Hoist Spare Parts KitApplicable only when purchased with a new hoistKit includes the following hoist motion only parts:
Global King Monorail Wire Rope Hoist
WRH-V1-EN 2014-05
www.cmworks.com
Please contact our authorized distributor.
Singapore/Malaysia/Indonesia/Vietnam/Brunei/Philippines/Australia
Columbus McKinnon Asia Pacific Pte Ltd
No.2, Jurong East Street 21, #04-31J,
IMM Building, Singapore 609601.
Email: [email protected]
Thailand
Yale Industrial Products Asia (Thailand) Co., Ltd.
BB Building Room 1510, 15th Floor, 54 Asoke Road, Klongtannua,
Wattana, Bangkok 10110, Thailand
Email: [email protected]
India
Columbus McKinnon Corporation India Office
Flat No. 101b, Heerabai Niwas
Behind Symantec, Baner
Pune 411045 India
Email: [email protected]