specifications for 8ft

2
FEATURES & SPECIFICATIONS INTENDED USE To retrofit an existing T12 or T8 fluorescent light fixture into a T5. When used in tandem with a de lamping program, proven energy reductions have been achieved between 40 & 80 percent. ATTRIBUTES An adapter which incorporate its on proprietary ballast that allows a T5 bulb to fit into and operate in an existing T12 or T8 light fixture. CONSTRUCTION Factory milled aluminum housing with extruded high density plastic end caps with integral T5 sockets. Formed plastic reflector, with Mylar reflector film insert. FINISH Powder coated mechanically adhered for superior paint adhesion and rust resistance. Painted parts finished with highly reflective matte white enamel. BULB COMPATABILITY Uses a standard T5 bulb 2 FT, 3 FT or 4 FT ELECTRICAL SYSTEM Can operate on 120v, 277v or 347v. Proprietary ballast is enclosed in body of adapter. Ballast is rated for 60000 hours and has a power factor of .99. LISTING MET. E113075 to the UL 935 standard. NRTL approved. WARRANTY Guaranteed for five years against mechanical defects in manufac- ture. Specification subject to change without notice. 8FT Adapter/LP* W/Reflector 8FT Adapter/LP* W/O Reflector ECOVISION ENERGY SOLUTIONS, LLC. 3350 Riverwood Pkwy, S.E. Suite GL-25, Atlanta, GA 30339 P- 770-951-9653 F– 770-951-1477 www.ecovisionlighting.com LINEAR T5 ADAPTER—2FT AVAILABLE WITH/WITHOUT REFLECTOR

Upload: i-k2

Post on 14-Mar-2016

223 views

Category:

Documents


0 download

DESCRIPTION

8ft specifications for an adaptor

TRANSCRIPT

Page 1: specifications for 8ft

FEATURES & SPECIFICATIONS

INTENDED USETo retrofit an existing T12 or T8 fluorescentlight fixture into a T5. When used in tandem with a de lamping program, proven energy reductions have been achieved between 40 & 80 percent.

ATTRIBUTESAn adapter which incorporate its on proprietary ballast that allows a T5 bulb to fit into and operate in an existing T12 or T8 light fixture.

CONSTRUCTIONFactory milled aluminum housing with extruded high density plastic end caps with integral T5 sockets. Formed plastic reflector, with Mylar reflector film insert.

FINISHPowder coated mechanically adhered for superior paint adhesion and rust resistance. Painted parts finished with highly reflective matte white enamel.

BULB COMPATABILITYUses a standard T5 bulb 2 FT, 3 FT or 4 FT

ELECTRICAL SYSTEMCan operate on 120v, 277v or 347v. Proprietary ballast is enclosed in body of adapter. Ballast is rated for 60000 hours and has a power factor of .99.

LISTINGMET. E113075 to the UL 935 standard. NRTL approved.

WARRANTYGuaranteed for five years against mechanical defects in manufac-ture. Specification subject to change without notice.

8FT Adapter/LP* W/Reflector 8FT Adapter/LP* W/O Reflector

ECOVISION ENERGY SOLUTIONS, LLC.3350 Riverwood Pkwy, S.E. Suite GL-25, Atlanta, GA 30339 P- 770-951-9653 F– 770-951-1477 www.ecovisionlighting.com

LINEAR T5 ADAPTER—2FT AVAILABLE WITH/WITHOUT REFLECTOR

Page 2: specifications for 8ft

Before After

T8 tube

Electronical Ballast

LIve

Neutral

12

34

Helico T5 adapter [Mad:HEN, HES, MEN, MES]

Electronical Ballast

LIve

Neutral

12

34

Instalation and wiring planCheck the voltage range to make sure they correspond with the fixture. Make Sure the existing fixture is with an inductive ballast, electronic ballast or rapid start ballast. the 277v adapter is an universal adapter.

EcoVision Energy Solutions, LLC.An Exclusive North American Distributor—Under License by Always Earth Friendly, LLC. since 2011.

UL 935CSA C 22.2 NO.74E 113075

MET R

NRTL LISTED

C US