Tel 250-286-9500 • 1-800-208-2217 • Fax 250-286-95025791 Duncan Bay Road, Campbell River, BC V9H 1N6www.tmarequipment.com

Designed & Builtin Canada

Specifications

T-MAR LOG CHAMP 250 TRACTION WINCH

ENGINE Caterpillar C7.1 SPOOLING 100% passive spooling system.Works in concert with LaggedDrum. No gear or hydraulic drive.No Diamond Jackscrew for easy maintenance and long life.

275 HP @ 2,200 rpmTurbocharged, air to air aftercooled

CONSTANT Hydrostatic bi-directional

WINCH Lagged Drum with 2900’ capacity(1” swagged rope) or 2300’ capacity (1 1/8” swaged rope).

STRAWLINE Optional Strawline Drum for rigging.Capacity: 4,500 ft. (3/8” diameter) Line Pull: 15,000 lbs.Brake: Hydraulic actuated disc.

Line pull limited to provide a 5:1 safety factor.

TENSION DRIVE Constant tension, remotely adjustable.Tension constant within 2%regardless of machine movement.

BRAKE Spring applied Band Emergency andParking Brake mechanically appliesif hydraulic pressure is lost, power is

GUYLINE DRUM Optional Guyline DrumCapacity: 150’ (1 1/8” diameter)

lost, engine stops or emergency stop is pressed. Brake is always off in normal operation.

ANCHOR BLADE Cupped Blade for anchoring in soilor behind stumps or rocks. Fairleadwith large sheaves redule line wearand prevent reverse bends.

HYDRAULICS Triple piston pumps c/w valving.Provides flow for Winch, Travel, Blade and accessories.

SAFETY Emergency shutdown on fourpoints at corners of the machine.Emergency shutdown on radio.Machine shuts down if radio contact is lost.

RADIO CONTROL Travel, Blade, Winch and accessories100% radio controlled. Operator staysin his cab and repositions remotely.No tie-in to machine required.Shackle and Go!

CAMERAS Optional Remote Camera Systemwith three views.

MOBILITY 8” pitch Excavator Rail c/w 24” pads.Low maintenance spring type recoil.2 speed Final Drives operates up to45º angle. 36” ground clearance.

SHIPPING Operating weight: 65,000 lbs.Width: 11’Height: 9’ 8”Length: 21’

Specifications may change without prior notice.