specifications - farnell element14 · approval for specifications only. * this specification is...

TECH. CORP.

SPECIFICATIONS

CUSTOMER : PTC SAMPLE CODE (Ver.) :

PC1602ARU-HWB-G-Q(Rev.0) MASS PRODUCTION CODE (Ver.) DRAWING NO. (Ver.)

: PC-95005

Customer Approved

Date:

Approved QC Confirmed Designer

Approval For Specifications Only. * This specification is subject to change without notice.

Please contact Powertip or its representative before designing your product based on this specification.

Approval For Specifications and Sample.

POWERTIP TECH. CORP. Headquarters: No.8, 6th Road, Taichung Industrial Park,

Taichung, Taiwan

407 8

TEL: 886-4-2355-8168

FAX: 886-4-2355-8166

E-mail: [email protected]

Http://www.powertip.com.tw

NO.PT-A-005-6

PC1602ARU-HWB-G-Q Rev.0(DK) Page2

RECORDS OF REVISION

Date Rev. Description Note Page

2006/6/13 0 PC1602ARU-HWB-G-Qis the ROHS compliant part number

based on Powertip's standard PC1602ARU-HWB-G

Total19 Page


Contents

1. SPECIFICATIONS 1.1 Features 1.2 Mechanical Specifications 1.3 Absolute Maximum Ratings 1.4 DC Electrical Characteristics 1.5 Optical Characteristics 2. MODULE STRUCTURE 2.1 Counter Drawing 2.2 Interface Pin Description 2.3 Timing Characteristics 2.4 Display Command 2.5 Character Pattern 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart 3.2 Inspection Specification

4. RELIABILITY TEST 4.1 Reliability Test Condition

5. PRECAUTION RELATING PRODUCT HANDLING 5.1 Safety 5.2 Handling 5.3 Storage 5.4 Terms of Warranty

6. THIS PRODUCT CONFORMS THE ROHS OF PTC. NoteFor detailed information please refer to IC data sheetST7066U,KS0065B


1. SPECIFICATIONS

1.1 Features Item Standard Value

Display Type 16*2 Characters

LCD Type STN, YG, Positive, Reflective, Extended Temp.

Driver Condition LCD Module: 1/16 Duty, 1/5 Bias

Viewing Direction 6 Oclock

Backlight -

Weight 15 g

Interface

Other

1.2 Mechanical Specifications Item Standard Value Unit

Outline Dimension 85.0 (L)* 36.0 (W)*10.2 max.(H) mm

Viewing Area 66.0 (L) *16.2(W) mm

Active Area 56.21 (L) *11.5(W) mm

Dot Size 0.56 (L) *0.66(W) mm

Dot Pitch 0.60 (L) *0.70(W) mmNoteFor detailed information please refer to LCM drawing

1.3 Absolute Maximum Ratings Item Symbol Condition Min. Max. Unit

Power Supply Voltage VDD -0.3 7.0 V

LCD Driver Supply Voltage VLCD VDD-10.0 VDD+0.3 V

Input Voltage VIN -0.3 VDD+0.3 V

Operating Temperature TOP Excluded B/L -20 70

Storage Temperature TST Excluded B/L -30 80

Storage Humidity HD Ta40 - 90 %RH


1.4 DC Electrical Characteristics

VDD = 5.0 V 0.5VVSS = 0VTa = 25

Item Symbol Condition Min. Type Max. Unit

Logic Supply Voltage VDD 4.5 5.0 5.5 V

H Input Voltage VIH 0.7 VDD - VDD V

L Input Voltage VIL -0.3 - 0.6 V

H Output Voltage VOH IOH=-0.1mA 3.9 - VDD V

L Output Voltage VOL IOL=0.1mA - - 0.4 V

Supply Current IDD VDD = 5.0 V - 1.5 3.0 mA

-20 - - -

25 *1 5.6 5.8 6.0 LCM Driver Voltage VOP

70 - - -

V

Note: *1. THE VOP TEST POINT IS VDD - VO.

1.5 Optical Characteristics

LCD Panel1/16 Duty1/4BiasVLCD =6.0 VTa = 25

Item Symbol Conditions Min. Type Max. Reference

View Angle C>2.0, = 0 40 - - Notes 1 & 2

Contrast Ratio C = 5, = 0 5 7 - Note 3

Response Time(rise) tr = 5, = 0 - 200ms - Note 4

Response Time(fall) tf = 5, = 0 - 150 ms - Note 4


Light (when reflected) z (=0)

Note 1: Definition of angles and Note 2: Definition of viewing angles 1 and 2

1 2 viewing angle ( fixed) Note : Optimum viewing angle with the naked eye and viewing angle at

Cmax. Above are not always the same

Note 3: Definition of contrast C Note 4: Definition of response time

Brightness (reflection) of unselected dot (B2) C =

Brightness (reflection) of selected dot (B1)

ContrastNon-selected state

VLCD

-VLCD

0

tf

90%

tr

10%

Selected state Non-selected state

Time

0 Note: Measured with a transmissive LCD operating voltage (v) panel which is displayed 1 cm2

VLCD : Operating voltage fFRM : Frame frequency tr : Response time (rise) tf : Response time (fall)

(%)

Brightness

(reflection)

Brightness (reflection) of

selected dot

Brightness

(reflection) of

unselected dot

Cmax.

Contrast

C 2.0

Sensor

LCD panel X(=90)

Light (when transmitted )

X

Z

Y(=0)

(=90)

Y(=180)

B2

B1


2. MODULE STRUCTURE 2.1 Counter Drawing


2.2 Interface Pin Description

Pin No. Symbol Function 1 VSS Signal ground (GND) 2 VDD Power Supply for logic (VDD > VSS) 3 VO Operating Voltage for LCD (variable)

4 RS

Register Selection input High = Data register Low = Instruction register (for write) Busy flag address counter (for read)

5

R/W R/W signal input is used to select the read/write mode High = Read mode, Low = Write mode

6 E Start enable signal to read or write the data 7~10

DB0 ~ DB3

Four low order bi-directional three-state data bus lines. Used For data transfer between the MPU and the LCD module. These four are not used during 4-bit operation.

11~14 DB4~DB7

Four high order bi-directional three-state data bus lines. Used for data transfer between the MPU and the LCD module. DB7 can be used as a busy flag.

15 A NC 16 K NC

Contrast Adjust

LCD MODULE

VDD 2

3

10~20K VO

Negative voltage


2.3 Timing Characteristics

Writing data from MPU to ST7066U

VIH1VIL1TAS

TAH

TAH

TPW

TH

Valid data

TC

DB0-DB7

E

R/W

RS

TDSWTR

Reading data from ST7066U to MPU

RS

R/W

E

DB0-DB7

TC

TDDR

Valid data

TH

TPW

TAH

TAHTR

TASVIL1VIH1


Write Mode (Writing data from MPU to ST7066U)

(VDD=+5V+10%, VSS=0V, Ta=25C) Symbol Characteristics Test Condition Min. Type Max. Unit

TC Enable Cycle Time Pin E 1200 - - ns TPW Enable Pulse Width Pin E 140 - - ns

TR , TF Enable Rise / Fall Time Pin E - - 25 ns TAS Address Setup Time Pins: RS , RW,E 0 - - ns TAH Address Hold Time Pins :RS,RW,E 10 - - ns

TDSW Data Setup Time Pins:DB0~DB7 40 - - ns TH Data Hold Time Pins:DB0~DB7 10 - - ns

Read Mode (Reading data from ST7066U to MPU) (VDD=+5V+10%, VSS=0V, Ta=25C)

Symbol Characteristics Test Condition Min. Type Max. Unit TC Enable Cycle Time Pin E 1200 - - ns

TPW Enable Pulse Width Pin E 140 - - ns TR , TF Enable Rise / Fall Time Pin E - - 25 ns

TAS Address Setup Time Pins: RS , RW,E 0 - - ns TAH Address Hold Time Pins :RS,RW,E 10 - - ns TDDR Data Setup Time Pins:DB0~DB7 - - 100 ns TH Data Hold Time Pins:DB0~DB7 10 - - ns


2.4 Display Command

Instruction Code Instructions

RS R/W DB

7

DB

6

DB

5

DB

4

DB

3

DB

2

DB

1

DB

0

Description Description

Time (270KHz)

Clear Display

0 0 0 0 0 0 0 0 0 1 Write "20H" to DDRAM. and set DDRAM address to "00H" from AC.

1.52ms

Return Home

0 0 0 0 0 0 0 0 1

Set DDRAM address to "00H" from AC and return cursor to it's original position if shifted. The contents of DDRAM are notchanged.

1.52ms

Entry Mode Set

0 0 0 0 0 0 0 1 I/D S

Sets cursor move direction and specifies display shift. These operations are performed during data write and read .

37s

Display ON/OFF

0 0 0 0 0 0 1 D C B

D=1 : entire display on C=1 : cursor on B=1 : cursor position on

37s

Cursor or Display

Shift 0 0 0 0 0 1 S/C R/L

Set cursor moving and display shift control bit, and the direction,without changing of DDRAM data.

37s

Function Set

0 0 0 0 1 DL N F DL: interface data is 8/4 bits NL: number of line is 2/1 F: font size is 511/58

37s

Set CGRAM Address

0 0 0 1 AC 5

AC 4

AC3

AC2

AC1

AC0

Set CGRAM address in address counter.

37s

Set DDRAM Address

0 0 1 AC 6

AC 5

AC 4

AC3

AC2

AC1

AC0

Set DDRAM address in address counter.

37s


Read Busy Flag and Address

0 1 BF AC 6

AC 5

AC 4

AC3

AC2

AC1

AC0

Whether during internal operationor not can be known by reading BF. The contents of address counter can also be read.

0s

Write Data to RAM

1 0 D7 D6 D5 D4 D3 D2 D1 D0Write data into internal RAM (DDRAM/CGRAM).

37s

Read Data from RAM

1 1 D7 D6 D5 D4 D3 D2 D1 D0Read data from internal RAM (DDRAM/CGRAM).

37s

Note: Be sure the ST7066U is not in the busy state (BF=0) before sending an instruction from the MPU to the ST7066. If an instruction is sent without checking the busy flag , the time between the first instruction and next instruction will take much longer than the instruction time itself. Refer to Instruction Table for the list of each instruction execution time .


2.5 Character Pattern


3. QUALITY ASSURANCE SYSTEM

3.1 Quality Assurance Flow Chart

Item Customer Sales R&D Q.A Manufactur

ing Product control

PurchaseInventory

control

Marketing &

Design

Sample Approval

Pilot Run &

Mass Product

Ship Out

OK

Request

Info Survey

Inquiry Project evaluation

Project Validation

Quote OK NG

Contract

Design check

Sample test

Verification

Sample approval

NG

NG

Pilot run & Reliability test

Verification

Specification preparation OK

Mass production

Inspection NGOK

Shipment

NG

Ship out

OK


Item Customer Sales R&D Q.A Manufactu

ring Product control

Purchase Inventory

control

Sales Service

Q.A Activity

1. ISO 9001 Maintenance Activities 2. Process improvement proposal 3. Equipment calibration 4. Education And Training Activities 5. Standardization Management

Info Claim

Failure analysis

Corrective action

Tracking

Analysis report


3.2 Inspection Specification Inspection StandardMIL-STD-105E Table Normal Inspection Single Sampling Level EquipmentGaugeMIL-STDPowertip TesterSample IQC Defect LevelMajor Defect AQL 0.4; Minor Defect AQL 1.5 FQC Defect Level100% Inspection OUT Going Defect LevelSampling Specification

NO Item Specification Judge Level

1 Part Number The part number is inconsistent with work order of production N.G. Major

2 Quantity The quantity is inconsistent with work order of production N.G. Major

The display lacks of some patterns. N.G. MajorMissing line. N.G. MajorThe size of missing dot, A is1/2 Dot size N.G. MajorThere is no function. N.G. Major

3

Electronic characteristics of

LCM A=( L + W )2

Output data is error N.G. MajorMaterial is different with work order of production N.G. MajorLCD is assembled in inverse direction N.G. MajorBezel is assembled in inverse direction N.G. MajorShadow is within LCD viewing area + 0.5 mm N.G. MajorThe diameter of dirty particle, A is0.4 mm N.G. MinorDirty particle length is 3.0mm, and 0.01mmwidth 0.05mm N.G. Minor

Display is without protective film N.G. MinorConductive rubber is over bezel 1mm N.G. MinorPolarizer exceeds over viewing area of LCD N.G. MinorArea of bubble in polarizer, A1.0mm, the number of bubble is 1 piece. N.G. Minor

4

Appearance of LCD

A=( L + W )2

Dirty particle (Including

scratchbubble )

0.4mmArea of bubble in polarizer, A1.0mm, the number of bubble is 4 pieces. N.G. Minor

Burned area or wrong part number is on PCB N.G. MajorThe symbol, character, and mark of PCB are unidentifiable. N.G Minor

The stripped solder mask , A is1.0mm N.G. Minor0.3mmstripped solder mask or visible circuit, A 1.0mm, and the number is 4 pieces N.G. Minor

There is particle between the circuits in solder mask N.G MinorThe circuit is peeled off or cracked N.G MinorThere is any circuits risen or exposed. N.G Minor0.2mmArea of solder ball, A is 0.4mm The number of solder ball is 3 pieces N.G Minor

5 Appearance of

PCB A=( L + W )2

The magnitude of solder ball, A is 0.4mm. N.G Minor


NO Item Specification Judge Level

The shape of modeling is deformed by touching. N.G. MajorInsufficient epoxy: Circuit or pad of IC is visible N.G. MinorExcessive epoxy: Diameter of modeling is 20mm or height is 2.5mm N.G. Minor

6 Appearance of

molding A=( L + W )2

The diameter of pinhole in modeling, A is 0.2mm. N.G. MinorThe folding angle of frame must be 45+10 N.G. MinorThe area of stripped electroplate in top-view of frame, A is 1.0mm. N.G. Minor

Rust or crack is (Top view only) N.G. Minor7 Appearance of frameA=( L + W )2

The scratched width of frame is 0.06mm. (Top view only) N.G. Minor

The color of backlight is nonconforming N.G. MajorBacklight cant work normally. N.G. MajorThe LED lamp cant work normally N.G. MajorThe unsoldering area of pin for backlight, A is 1/2 solder joint area. N.G. Minor

8

Electrical characteristic of

backlight

A=( L + W )2 The height of solder pin for backlight is 2.0mm N.G. MinorThe mark or polarity of component is unidentifiable. N.G. MinorThe height between bottom of component and surface of the PCB is floating 0.7mm N.G. Minor

D1/4W W D

D Pad

N.G. Minor

End solder joint width, D is 50% width of component termination or width of pad N.G. Minor

Side overhang, D is 25% width of component termination. N.G. Minor

Component is cracked, deformed, and burned, etc. N.G. MinorThe polarity of component is placed in inverse direction. N.G. Minor

10 Assembly parts A=( L + W )2

Maximum fillet height of solder extends onto the component body or minimum fillet height is 0.5mm.

N.G. Minor


4. RELIABILITY TEST

4.1 Reliability Test Condition

NO Item Test Condition

1 High Temperature

Storage

Storage at 80 2 96~100 hrs Surrounding temperature, then storage at normal condition 4hrs

2 Low Temperature

Storage

Storage at -30 2 96~100 hrs Surrounding temperature, then storage at normal condition 4hrs

3 High Temperature /Humidity Storage

1.Storage 96~100 hrs 602, 90~95%RH surrounding temperature, then storage at normal condition 4hrs.

(Excluding the polarizer). or 2.Storage 96~100 hrs 402, 90~95%RH surrounding

temperature, then storage at normal condition 4 hrs.

4 Temperature Cycling

-20 25 70 25 (30mins) (5mins) (30mins) (5mins)

10 Cycle

5 Vibration 10~55Hz ( 1 minute ) 1.5mm

X,Y and Z direction (each 2hrs)

Air Discharge: Apply 6 KV with 5 times discharge for each polarity +/-

Contact Discharge: Apply 250V with 5 times discharge for each polarity +/-

6 ESD Test Testing location: Around the face of LCD

Testing location: 1.Apply to bezel. 2.Apply to Vdd, Vss.

Packing Weight (Kg) Drop Height (cm) 0 ~ 45.4 122

45.4 ~ 90.8 76 90.8 ~ 454 61

7 Drop Test

Over 454 46


5. PRECAUTION RELATING PRODUCT HANDLING 5.1 SAFETY

5.1.1 If the LCD panel breaks , be careful not to get the liquid crystal to touch your skin. 5.1.2 If the liquid crystal touches your skin or clothes , please wash it off immediately by

using soap and water. 5.2 HANDLING

5.2.1 Avoid any strong mechanical shock which can break the glass. 5.2.2 Avoid static electricity which can damage the CMOS LSIWhen working with the

module , be sure to ground your body and any electrical equipment you may be using. 5.2.3 Do not remove the panel or frame from the module.

5.2.4 The polarizing plate of the display is very fragile. So , please handle it very carefully ,do not touch , push or rub the exposed polarizing with anything harder than an HB pencil lead (glass , tweezers , etc.)

5.2.5 Do not wipe the polarizing plate with a dry cloth , as it may easily scratch the surface of plate.

5.2.6 Do not touch the display area with bare hands , this will stain the display area. 5.2.7 Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with

a cleaning naphtha solvent. 5.2.8 To control temperature and time of soldering is 32010and 3-5 sec. 5.2.9 To avoid liquid (include organic solvent) stained on LCM

5.3 STORAGE 5.3.1 Store the panel or module in a dark place where the temperature is 25 5

and the humidity is below 65% RH. 5.3.2 Do not place the module near organics solvents or corrosive gases.

5.3.3 Do not crush , shake , or jolt the module. 5.4 TERMS OF WARRANTY 5.4.1 Applicable warrant period

The period is within thirteen months since the date of shipping out under normal using and storage conditions.

5.4.2 Unaccepted responsibility This product has been manufactured to your companys specification as a part for use in your companys general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment , we cannot take responsibility if the product is used in nuclear power control equipment , aerospace equipment , fire and security systems or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required.

specifications - farnell element14 · approval for specifications only. * this specification is...

Documents