specifications - cnet content

2
PART NUMBER V11H256052 V11H255052 MODEL NUMBER EMP-822 EMP-83 PROJECTION SYSTEM RGB Liquid-Crystal Shutter Projection System SPECIFICATION OF LCD SIZE 0.63 inch with MLA (x3) 0.63 inch w/o MLA (x3) MAIN PARTS DRIVING METHOD Polysilicon TFT Active Matrix PIXEL NUMBER 786432 dots (1024 x 768) x 3 NATIVE RESOLUTION XGA PROJECTION LENS Manual Focus & 1.2x Optical Zoom F=1.60 - 1.74 / f=18.4 - 22.1 mm LAMP TYPE 170 W UHE LIFE* 3000 hours (High Brightness mode) 4000 hours (Low Brightness mode) SCREEN SIZE (PROJECTED DISTANCE) 30 to 300 inch (0.9 to 10.4 m) BRIGHTNESS HIGH BRIGHTNESS MODE 2600 ANSI Im 2200 ANSI Im LOW BRIGHTNESS MODE 2080 ANSI Im 1760 ANSI Im CONTRAST 400:1 COLOUR REPRODUCTION Full-Colour (16.77 million colours) SOUND OUTPUT 7 W Monaural EFFECTIVE SCANNING PIXEL CLOCK 13.5 MHz to 162 MHz FREQUENCY RANGE HORIZONTAL 15 KHz to 92 kHz (Analog) VERTICAL 50 Hz to 85 Hz AUTO KEYSTONE CORRECTION Vertical: -30 to +30 degrees ANALOG RGB I/O DISPLAY PERFORMANCE NATIVE 1024 x 768 dots (VGA) RESIZE UXGA/SXGA/SVGA/VGA INPUT TERMINAL VIDEO D-sub 15-pin x 2 AUDIO Stereo mini-jack x 2 OUTPUT TERMINAL VIDEO D-sub 15-pin x 1 AUDIO Stereo mini-jack x 1 VIDEO I/O INPUT SIGNAL VIDEO STANDARD NTSC/NTSC4.43/PAL/M-PAL/N-PAL/PAL60/SECAM INPUT TERMINAL VIDEO Composite Video: RCA (Yellow) x 1 S-Video: Mini DIN Component Video: D-sub 15-pin x 2 Video-RGB: D-sub 15-pin x 2 AUDIO RCA x 2 (White/Red) CONTROL I/O SERIAL I/O TERMINAL Mini D-sub 9 pin x 1 NETWORK I/O LAN (RJ45) x 1 OPERATING TEMPERATURE 5ºC to 35ºC <41ºF to 95ºF> OPERATING ALTITUDE Up to 7,500 feet <2,286m> (over 4,921 feet <1,500m> area; with High Altitude mode) START-UP PERIOD About 5 Seconds COOL DOWN PERIOD Instant Off POWER SUPPLY VOLTAGE 100 - 240 VAC+/- 10%, 50/60 Hz POWER CONSUMPTION LAMP ON 231W STAND BY 5.8W DIMENSIONS (D x W x H) 245 x 327 x 92 mm ( Excludes Feet ) WEIGHT Approx. 2.9kg/6.4 lbs FAN NOISE 28 dB (Low Brightness Mode) Presenting the complete multimedia projector that gives you unbeatable performance and value. *These are not the guaranteed number of lamp hours, but the recommended hours after which the lamp should be replaced in order to ensure optimum picture quality. SPECIFICATIONS Dealer's Stamp www.epson.com.sg EPSON is the registered trademark of Seiko Epson Corporation. All other product names and other company names used herein are for identification purposes only and are the trademarks or registered trademarks of their respective owners. EPSON disclaims any and all rights in those marks. Scan/Print samples shown herein are simulations. Specifications are subject to change without notice. SUPPLIED ACCESSORIES Power Cable 3.0m Computer Cable 1.8m <6 ft>, AHD-15 pin type slim-cable Remote Control With AAA type alkaline batteries x 2pcs Password Protect Sticker User’s Manual Printed in April 2007 Weight- EMP-822/83 Approx. 2.9kg/6.1lbs. 92mm 245mm 327mm INDIA - (91) 80-305-15000, CALCUTTA - 228 31589/90, CHENNAI - 302 77500, MUMBAI - 282 61515/16/17, NEW DELHI - 306 15000 INDONESIA - (62) 21-572-3161 MALAYSIA - (60) 3-562-88288 PHILIPPINES - (632) 813-6567 SINGAPORE - (65) 6586-5500, (65) 6586-3111 THAILAND / INDOCHINA - (662) 685-9888 OPTIONAL ACCESSORIES ELPLP42 (V13H010L42) Replacement Lamp ELPAF13 (V13H134A13) Air Filter Set ELPST09B (V12H007T09) Presentation Remote Control Kit PROJECTION DISTANCE CONNECTOR PANEL • Bright Luminance - EMP-822 projects up to 2600 ANSI Im - EMP-83 projects up to 2200 ANSI Im • Built-in 7W High Output Speaker • Instant Off for easy usage Audio RS-232C Monitor Out Computer 2/ Component Video Computer 1/ Component Video S-Video Video L-Audio-R LAN Audio 1 Audio 2 Audio out Longer Lamp Life 4000 Hours Lasting up to 4000 hours, EMP-822/83 gives you a longer lamp life than before. This translates to lower running costs, giving you better economic value for extended usage. Auto Keystone Correction This function automatically detects the projector’s vertical angle with +/- 30 o and adjusts the vertical keystone distortion instantly within one second. It is easy to use and saves time. New E-TORL Lamp Former lamp Newly designed lamp Innovative E-TORL Lamp E-TORL: Epson-Twin Optimize Reflection Lamp Epson developed small, high performance “E-TORL” lamps efficiently gather and project light to effectively eliminate light-leakage and minimise light diffraction. This system combines an ellipsoidal reflector with an aspherical lens and a hemispherical mirror to produce a lamp so small and highly efficient that it is ahead of its time. EMP-Monitor Low Power Consumption It uses a low 231W during operation and just 5.8W when on standby* mode. With an environmentally-conscious and energy-conserving design, it will shut the power off automatically if the slide has been closed for 30 minutes. Easy Lamp Change The lamp can be replaced easily by simply accessing it from the hatch on the top of the projector. The hatch on the top of the projector is removed by merely loosening 1 screw. Ceiling-mounted projectors lamps can be changed without having to remove it from the ceiling. Security Function Tough Security Bar, Password Protect and Kensington Lock EMP-822/83 have a built-in, tough security bar as a reliable countermeasure against theft. Password protection and a Kensington Lock are also built-in to give peace of mind when used in high traffic venues. Network Functionality Oversee and control the state of a projector from a remote LAN connected PC. The PC acts as remote controller, allowing you to turn the power on and off, change between sources, control and monitor the lamp and temperature conditions, and identify any potential problems that may arise. * These values are for 200-240 volt region. Consumption is 248W and 4.1W in 100-140 volt region Tele (cm) 101 136 206 275 345 693 1041 Diagonal Screen Size (inches) 30” 40” 60” 80” 100” 200” 300” Wide (cm) 84 113 171 229 287 577 867

Upload: others

Post on 16-Feb-2022

4 views

Category:

Documents


0 download

TRANSCRIPT

PART NUMBER V11H256052 V11H255052

MODEL NUMBER EMP-822 EMP-83

PROJECTION SYSTEM RGB Liquid-Crystal Shutter Projection System

SPECIFICATION OF LCD SIZE 0.63 inch with MLA (x3) 0.63 inch w/o MLA (x3)MAIN PARTS DRIVING METHOD Polysilicon TFT Active Matrix PIXEL NUMBER 786432 dots (1024 x 768) x 3 NATIVE RESOLUTION XGA

PROJECTION LENS Manual Focus & 1.2x Optical ZoomF=1.60 - 1.74 / f=18.4 - 22.1 mm

LAMP TYPE 170 W UHELIFE* 3000 hours (High Brightness mode)

4000 hours (Low Brightness mode)

SCREEN SIZE (PROJECTED DISTANCE) 30 to 300 inch (0.9 to 10.4 m)

BRIGHTNESS HIGH BRIGHTNESS MODE 2600 ANSI Im 2200 ANSI ImLOW BRIGHTNESS MODE 2080 ANSI Im 1760 ANSI Im

CONTRAST 400:1

COLOUR REPRODUCTION Full-Colour (16.77 million colours)

SOUND OUTPUT 7 W Monaural

EFFECTIVE SCANNING PIXEL CLOCK 13.5 MHz to 162 MHzFREQUENCY RANGE HORIZONTAL 15 KHz to 92 kHz(Analog) VERTICAL 50 Hz to 85 Hz

AUTO KEYSTONE CORRECTION Vertical: -30 to +30 degrees

ANALOG RGB I/O DISPLAY PERFORMANCE NATIVE 1024 x 768 dots (VGA)RESIZE UXGA/SXGA/SVGA/VGA

INPUT TERMINAL VIDEO D-sub 15-pin x 2AUDIO Stereo mini-jack x 2

OUTPUT TERMINAL VIDEO D-sub 15-pin x 1AUDIO Stereo mini-jack x 1

VIDEO I/O INPUT SIGNAL VIDEO STANDARD NTSC/NTSC4.43/PAL/M-PAL/N-PAL/PAL60/SECAMINPUT TERMINAL VIDEO Composite Video: RCA (Yellow) x 1

S-Video: Mini DINComponent Video: D-sub 15-pin x 2Video-RGB: D-sub 15-pin x 2

AUDIO RCA x 2 (White/Red)

CONTROL I/O SERIAL I/O TERMINAL Mini D-sub 9 pin x 1

NETWORK I/O LAN (RJ45) x 1

OPERATING TEMPERATURE 5ºC to 35ºC <41ºF to 95ºF>

OPERATING ALTITUDE Up to 7,500 feet <2,286m>(over 4,921 feet <1,500m> area; with High Altitude mode)

START-UP PERIOD About 5 Seconds

COOL DOWN PERIOD Instant Off

POWER SUPPLY VOLTAGE 100 - 240 VAC+/- 10%, 50/60 Hz

POWER CONSUMPTION LAMP ON 231WSTAND BY 5.8W

DIMENSIONS (D x W x H) 245 x 327 x 92 mm ( Excludes Feet )

WEIGHT Approx. 2.9kg/6.4 lbs

FAN NOISE 28 dB (Low Brightness Mode)

Presenting the complete multimedia projectorthat gives you unbeatable performance and value.

*These are not the guaranteed number of lamp hours, but the recommended hours after which the lamp should be replaced in order to ensure optimum picture quality.

SPECIFICATIONS

Dealer's Stamp

www.epson.com.sg

EPSON is the registered trademark of Seiko EpsonCorporation.

All other product names and other company namesused herein are for identification purposes only andare the trademarks or registered trademarks of theirrespective owners.

EPSON disclaims any and all rights in those marks.Scan/Print samples shown herein are simulations.Specifications are subject to change without notice.

SUPPLIED ACCESSORIES

Power Cable 3.0mComputer Cable 1.8m <6 ft>,

AHD-15 pin type slim-cableRemote Control With AAA type

alkaline batteries x 2pcsPassword Protect StickerUser’s Manual

Printed in April 2007

Weight-EMP-822/83 Approx. 2.9kg/6.1lbs.

92mm

245mm

327mm

INDIA - (91) 80-305-15000, CALCUTTA - 228 31589/90,CHENNAI - 302 77500, MUMBAI - 282 61515/16/17,NEW DELHI - 306 15000INDONESIA - (62) 21-572-3161MALAYSIA - (60) 3-562-88288PHILIPPINES - (632) 813-6567SINGAPORE - (65) 6586-5500, (65) 6586-3111THAILAND / INDOCHINA - (662) 685-9888

OPTIONAL ACCESSORIES

ELPLP42 (V13H010L42) Replacement LampELPAF13 (V13H134A13) Air Filter SetELPST09B (V12H007T09) Presentation Remote Control Kit

PROJECTION DISTANCE

CONNECTOR PANEL

• Bright Luminance - EMP-822 projects up to 2600 ANSI Im- EMP-83 projects up to 2200 ANSI Im

• Built-in 7W High Output Speaker• Instant Off for easy usage

Audio

RS-232CMonitor Out

Computer 2/Component Video

Computer 1/Component VideoS-Video Video L-Audio-RLAN

Audio 1Audio 2

Audio out

Longer Lamp Life 4000 Hours

Lasting up to 4000 hours, EMP-822/83 gives you a longer lamp lifethan before. This translates to lower running costs, giving you bettereconomic value for extended usage.

Auto Keystone Correction

This function automatically detects the projector’s vertical anglewith +/- 30o and adjusts the vertical keystone distortion instantlywithin one second. It is easy to use and saves time.

New E-TORL Lamp

Former lamp

Newlydesigned

lamp

Innovative E-TORL LampE-TORL: Epson-Twin Optimize Reflection Lamp

Epson developed small, high performance “E-TORL” lamps efficientlygather and project light to effectively eliminate light-leakage andminimise light diffraction.

This system combines an ellipsoidal reflector with an aspherical lensand a hemispherical mirror to produce a lamp so small and highlyefficient that it is ahead of its time.

EMP-Monitor

Low Power Consumption

It uses a low 231W during operation and just 5.8W when on standby*mode. With an environmentally-conscious and energy-conservingdesign, it will shut the power off automatically if the slide has beenclosed for 30 minutes.

Easy Lamp ChangeThe lamp can be replaced easily by simply accessing it from thehatch on the top of the projector. The hatch on the top of the projectoris removed by merely loosening 1 screw. Ceiling-mounted projectorslamps can be changed without having to remove it from the ceiling.

Security FunctionTough Security Bar, Password Protect and Kensington Lock

EMP-822/83 have a built-in, tough security bar as a reliablecountermeasure against theft. Password protection and a KensingtonLock are also built-in to give peace of mind when used in high trafficvenues.

Network Functionality

Oversee and control the state of a projector from a remote LANconnected PC. The PC acts as remote controller, allowing you toturn the power on and off, change between sources, control andmonitor the lamp and temperature conditions, and identify anypotential problems that may arise.

* These values are for 200-240 volt region. Consumption is 248W and 4.1W in 100-140 volt region

Tele (cm)

101

136

206

275

345

693

1041

Diagonal ScreenSize (inches)

30”

40”

60”

80”

100”

200”

300”

Wide (cm)

84

113

171

229

287

577

867

With an impeccable array

of reliable and

convenient functions,

Epson’s EMP-822/83 is

the presentation partner

you can count on.

Bold, bright, beautiful Epson 3LCDprojectors

When powerful images are a must, so too is a 3LCDprojector. Systems that use 3LCD technology areeasy on the eyes because they reproduce astoundinglybeautiful images in bright, natural colour without dithernoise or colour break-up. 3LCD - The world leader inprojection technology.

Broadening the reach of 3LCD projectors3LCD projectors continue to be the most widely used projectors inthe world. Many different projector manufacturers adopt 3LCD dueto its overwhelmingly solid reputation. The fact that more than 11.3million front projectors units have been sold worldwide over the past17 years is a testament to customers’ trust in the technology andunderstanding of the stunningly beautiful images LCDs project.

What is a 3LCD projector

3LCD projectors pass light through LCDpanels about the size of a postagestamp and then use the projector’s lensto expand the minute details within theimages. Thus, the projector is able toreproduce a wide gamut of colours toproject clear, detailed and beautifulimages with ultra-smooth movementonto the viewing surface. This is thedefining characteristic of 3LCD systems.

A projector which uses the 3-panel LCD system breaks light wavesthat are produced by the lamp into the three primary colours, red,green and blue. Each of the three colours of light is then passedthrough its own LCD panel to provide images in full colour with silkysmooth movement. The three colours of light are then recombinedthrough a prism to give the images the rich, full colour which isprojected onto the viewing surface without the possibility any colourbreak-up.

The technology behind other projectors

Characteristics of 3LCD Projectorsfrom Epson

3LCD Projectors reproduce an impressive luminance of colours andbright images.

The most important thing is to reproduce the bright coloursof projected images.

The lumens detailed in the catalog refer to the brightness of aprojected image’s “full-white” area. Colour luminance, however, isalso very important in a projector. 3LCD projectors offer superiorcolour luminance, producing vivid and sharp colour images. Thesecapabilities enable them to provide more effective support than everbefore in business presentations, increasingly making use of coloursin images such as photographs and charts broken down by colour.

Natural images -Colour reproduction and gradation

3LCD projectors deliver natural images andfaithfully reproduce primary colours acrossa wide spectrum. Another important elementof proper image projection is smooth colourgradation along with smooth colour change.They project a broad array of presentationmaterials, such as photographic images,with a truly natural look and feel, so thatthey can be used effectively in all mannerof business applications.

Smooth video playback

3LCD projectors use three separate liquidcrystal panels -one red, one green and oneblue - for the continuous combination ofcolours. Thus in fast-moving images, 3LCDprojectors produce a smooth total image,preventing outlines from breaking up intomultiple lines. This smooth video playbackcontributes to making effectivepresentations.

Easy on the eyes

Colour break-up, which occurs in fieldsequential colour projection technology,arises from the relationship between themotion of an image on a screen and themotion of the viewer’s eyes. This causesthe image to suffer from a “rainbow-like”effect. 3 LCD projectors, however, do notsuffer from the effect but instead produceimages that are easy on the eyes.

Advancement of 3LCD projectorsThe world of imaging technology is constantly evolving and 3LCDprojectors are evolving right alongside to bring you more detailedand beautiful images. 3LCD projectors bring wonder and excitementto the world of imaging.

Highly reliableThe high reliability of 3LCD projectors is a matter of great pride forEpson. A major factor in the dependability of our products is thatthey contain no moving mechanical parts in the light control system.We believe that being the number one projector brand worldwide in2005 (source: Decision Tree Consulting) is a tribute to customers’trust in the reliability of our 3LCD projector systems.

EPSON’S 3LCD PROJECTORS -THE BEST OF LCD TECHNOLOGY

3-panel LCD system technology by Epson

The technology behind LCDprojectors

Brightnessin thecatalogue ismeasuredby a 100%full-whitepatternimage.

Actual image with colours projected

Close slide. A/V mute.

Open slide. Resume presentation.

A/V Mute Slide - For Smoother Presentation

Simply slide the A/V mute cover across and pause projectiontemporarily. The audience can then focus on you, or other elementsof your presentation. Fan noise is minimised when the slide is closed,while the projector light is suspended temporarily – allowing you totake advantage of the white board without distractions.

Instant Off Quick Shutdown

Simply press the Power-Off button, unplug the power cableimmediately after 'beep' sound. No cool-down is required. It’s easy,fast and convenient.

Direct Power On/Off

Start your presentation in style with style. Impress the audience byconnecting the projector into the room’s main power source so thatwhen you switch on the lights, the projector is also activated.

Powerful 7W Speaker

The built-in 7W speaker ispowerful enough to deliver richand clear sound to a class of30 people with no externalspeakers or amplifier needed.

Image showing smooth video playback

Smooth motion

Image showing colour break-up

Colour Break-up

Image showing smooth colour gradation

Picture with rough colour gradation

Picture with smooth colour gradation

Motion in which outlinesare broken up into multiple lines

Based on independent researchby Decision Tree Consulting(DTC)

3LCD projectors

Other projectors include1-chip DLP® projector

62.5% 37.5%

(3LCD projector market share from April, 1st 2001 through March 31st, 2006.)

Full-whitepattern

"DLP" is a registered trademark or a trademark of Texas Instruments in the US and/or other countries.

Normal

Screen

Lens

Color wheel

DLP® chip

Lamp

Lens

The technology behindthe internal prism

LCD panel (HTPS)

Red

Gre

e

n

Blue

Prism

LCD panel

Screen

Lens

Prism

MirrorLCD panel

Dichroic Mirror

Lamp

Dichroic Mirror

Mirror

*HTPS(High Temperature Poly-Silicon) is an active matrix transmissive LCD. It is extremely small and produces high quality images.

3LCD projector : RGB are synthesized inside the projector.

1-chip DLP® projector : RGB are synthesized in the human brain.

+ + + =

Image with bright colors Image with dark colors

Even though the brightness (brightness of white)described on catalog is the same,brightness of color differs depending on each technology and models

The second most common type of business projectors, other thanthe 3LCD projector system, is the 1-chip DLP® projector system.These 1-chip DLP® projectors reflect light by using a DLP® chip wherelamplight is typically switched alternately through red, green, blueand white parts of a rotating wheel.

MULTIFUNCTIONAL, RELIABILITY& AFFORDABLE PERFORMANCE

1.

2.

3.