specification sheet no2 night owl 2 project: no2 night owl ... · security / nema head lighting the...
TRANSCRIPT
NO2 Night Owl - Security Light
Secu
rity
/ Dus
k-to
-Daw
n
09-17-2019
Night Owl 2 Security / NEMA Head Lighting The NO2 “Night Owl” is an LED energy saving cost-effective solution to replace 100 and 150 watt HID (HPS & MH) NEMA Heads.
Construction:
Heavy duty die-cast aluminum housing Corrosion resistant (stainless steel) hardware Tool-less entry Three (3) station terminal block up to #6 AWG Mounting is adjustable for arms from 1-1/4” to 2” NPS
(1.625” to 2.375” O.D.) Integral tilt-adjustment steps + 5 degrees 3G vibration rated (ANSI C136.31) IP66 rated optical chamber Self cleaning heat sink Weight 9 lbs Effective Projected Area (EPA); 0.67 – 1.5 sq. ft.
Electrical:
Driver power factor is 90% minimum Driver maximum THD of 20% Driver voltage 120-277v (50/60Hz), non-dimming standard
with 3 pin photo control receptacle 0-10v dimming driver is standard with 7 pin photo control
receptacle Electronic driver has an expected life of 100,000 hours at
25°C ambient. Standard NEMA 3-pin twist lock photo control receptacle Optional NEMA 7-pin twist lock photo control receptacle Standard with 10kV/10kA surge protection (meets or ex-
ceeds ANSI/IEEEC62.41) Optional 20kV/20kA surge protection Suitable for ambient temperatures from -40°C to +45°C 86% lumen maintenance greater than 36,000 hours per
IESNA TM-21
Optical: IP66 rated optics enclosure Glass lens Standard 4000K (optional 3000K) 70 CRI Type III or Type V light distribution No uplight without refractor Optional tool-less drop acrylic lens Optional tool-less drop acrylic lens with built in glare shield Performance Ratings:
Certification Ratings: UL, cUL listed, suitable for wet locations 3G vibration rated (ANSI C136.31) IP66 fixture and optical enclosure (per ANSI C136.25-2009) LM79/LM80 compliant RoHS compliant Warranty: 10 year standard warranty Accessories: Mounting arms Prewiring Long-Life photocontrol or shorting cap Drop refractor with or without glare-shield
Features: To access the driver compartment, surge suppressor, terminal block and mounting brackets; there is a tool less entry door that opens from the bottom side of the housing. The optical compartment is IP66. An option-al tool-less refractor is available with or with out a glare shield. The casting has integral tilt-adjustment steps + 5de-gress, optional seven (7) pin photo control receptacle and two bolt mounting that accepts 1-1/4” to 2” tenon arms.
HI
Input Wattage Lumen Output 40W 5500 Lm 50W 6800 Lm 67W 9100 Lm
NO2Specification Sheet
Project:
Catalog#:
Approved by:
Night Owl 2Security / NEMA Head Lighting
Specifications subject to change without notice.
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652
www.HowardLightingProducts.com
Page 1 of 3Rev: 07/07/2020
Construction• Heavy duty die-cast aluminum housing• Corrosion resistant (stainless steel) hardware• Tool-less entry• Three (3) station terminal block up to #6 AWG• Mounting is adjustable for arms from 1-1/4” to 2” NPS
(1.625” to 2.375” O.D.)• Integral tilt-adjustment steps + 5 degrees• 3G vibration rated (ANSI C136.31)• IP66 rated optical chamber• Self cleaning heat sink• Weight 9 lbs• Effective Projected Area (EPA); 0.44 – 0.65 ft2
DescriptionThe NO2 “Night Owl” is an LED energy saving cost-effective solution to replace 100 and 150 watt HID (HPS & MH) NEMA Heads.
Installation Instructions
IES
Zip File
Electrical• Driver power factor is > 0.9 • Driver THD < 20%• Driver voltage 120-277v (50/60Hz), non-dimming standard
with 3 pin photo control receptacle• 0-10v dimming driver is standard with 7 pin photo control
receptacle• Electronic driver has an expected life of 100,000 hours at
25°C ambient.• Standard NEMA 3-pin twist lock photo control receptacle• Optional NEMA 7-pin twist lock photo control receptacle• Standard with 10kV surge protection (meets or ex-ceeds
ANSI/IEEEC62.41)• Optional 20kV surge protection• Suitable for ambient temperatures from -40°C to +45°C• 90% lumen maintenance greater than 36,000 hours per
IESNA TM-21
Optical• IP66 rated optics enclosure• Glass lens• Standard 4000K (optional 3000K)• 70 CRI• Type III or Type V light distribution• Optional tool-less drop acrylic lens (Option “D”)• Optional tool-less drop acrylic lens with built in glare shield
(Option “DG”)
Performance Ratings
Certification Ratings• UL, cUL listed, suitable for wet locations• 3G vibration rated (ANSI C136.31)• IP66 fixture and optical enclosure (per ANSI C136.25-2009)• LM79/LM80 compliant• RoHS compliant
Acessories• Mounting arms• Prewiring• Long-Life photocontrol or shorting cap• Drop refractor with or without glare-shield
Warranty• 10 year standard warranty
FeaturesTo access the driver compartment, surge suppressor, terminal block and mounting brackets; there is a tool less entry door that opens from the bottom side of the housing. The optical compartment is IP66. An option-al tool-less refractor is available with or with out a glare shield. The casting has integral tilt-adjustment steps + 5 degrees, optional seven (7) pin photo control receptacle and two bolt mounting that accepts 1-1/4” to 2” tenon arms.
Configuration Optical Distribution Input Power4000K CCT, 70CRI Lumen Maintenance @25°C
Lumens LPW B U G 36k Hrs 75k Hrs 100k Hrs
CType III
40W5,326 134 2 2 2
92% 85% 80%Type V 5,500 138 3 2 1
DType III
50W6,579 132 3 2 1
92% 85% 80%Type V 6,793 136 3 3 3
EType III
67W8,877 132 3 3 3
91% 84% 79%Type V 9,159 136 3 2 1
NO2Specification Sheet
Specifications subject to change without notice.
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652
www.HowardLightingProducts.com
Page 2 of 3Rev: 07/07/2020
Model Selection GuideModel Config. Driver Optics CCT Paint Surge
ProtectionPhotocontrol Receptacle Controls Hardware & Kit
Options Options
NO2: Night Owl w/
Glass Optics
C: 40W, 5,500Lumens
D: 50W, 6,800Lumens
E: 67W, 9,100Lumens
MV: 120-277V
MD: 120-277V w/ 0-10V Dimming*
3:Type III
5: Type V*
3:3000K
4:4000K*
U: Bare Aluminium
1: 10kV*
2: 20kV
P3: 3 Pin Photocontrol Receptacle
P7: 7 Pin Photocontrol Receptacle (requires driver option “MD”)
N: No Controls*
S: Shorting Cap
L1: Howard LL Photocontrol (HI-LL-127-15-BK-A)
L2: Howard LL Photocontrol (HI-LL-127-15-BK-AF)
L3: Howard LL Photocontrol (HI-LL-127-15-GN-A)
L4: Howard LL Photocontrol (HI-LL-127-15-GN-AF)
(Blank): No Options* 1: 18”, 1-1/4” diameter AL arm w/ hardware 2: 24”, 1-1/4” diameter AL arm w/ hardware 3: 30”, 1-1/4” diameter AL arm w/ hardware 8: Prewired w/ 2pcs 60” 14AWG solid CU, BK-WH D: Detachable drop refractor (field installed, tool less) DG: Detachable drop refractor with glare shield (field installed, tool less) PK1: Packaged Kit 1; 24” arm w/ hardware AND 60” prewire PK3: Packaged Kit 3; 24” arm w/ hardware, 60” prewire AND Adjustable Output Unit (AOU)
(Blank): No Options*
A: Adjustable Output Unit; AOU (requires driver option “MD”). This unit is factory set at position 8 and is easily field adjustable to other positions using a flat head screw-driver. Note that packaged kit 3, PK3, includes AOU. Please refer to NO2-AOU data sheet for output tables.
*Standard Configuration
Accesories
NO2-D: Detachable Drop Refractor NO2-DG: Detachable Drop Refractor w/ Glare Shield
NO2Specification Sheet
Specifications subject to change without notice.
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652
www.HowardLightingProducts.com
Page 3 of 3Rev: 07/07/2020
NO2E Type 3 Optics NO2E Type 5 Optics
Additional Product Views
Photometric Performance
Product View w/ NO2-DG In Use
Product View w/ NO2-D In Use
Bottom View
Side View
Top View